Noctua 200mm PWM Case Fan Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are searching for noctua nf a20 pwm chromax black swap alternatives, you have several distinct cooling paths to consider. The original Noctua 200mm fan delivers quiet airflow with a maximum noise level of 18.1 dB(A) and an 800 RPM top speed. It features a 30mm thick frame, multi-pattern mounting holes, and swappable colored anti-vibration pads. However, your setup might require integrated RGB lighting, a different brand, or a chassis that fits hardware beyond a standard standalone fan.
You might want an entire chassis engineered around 200mm cooling rather than an individual fan. The 6 alternatives in this guide were chosen because their specifications directly overlap with the 200mm sizing of the original. These picks include full-tower enclosures with pre-installed 200mm fans, open-frame ATX designs, and compact Small Form Factor cases. Comparing these layout specifications helps you select the correct clearance, fan capacity, and frame dimensions for your build.
Our top pick: Noctua 200mm PWM Case Fan.
Comparing 6 Alternatives to Noctua 200mm
Cooler Master HAF 700 EVO E-ATX Full-Tower
Cooler Master HAF 700 EVO Full Tower provides a complete E-ATX chassis with pre-installed 200mm Sickleflow cooling rather than a single fan. It brings Type-C connectivity, spacious hardware clearance, and a 55.3-pound frame measuring 26.2 inches long and 24.6 inches tall. The Noctua fan, by comparison, is an 11.2-ounce individual 200x30mm unit with swappable colored anti-vibration pads and multi-hole mounting. Choosing the HAF 700 EVO gives you an all-in-one housing for massive components, but you lose the flexibility to mount a fan into existing setups. Pick this chassis if you are planning an entire E-ATX build rather than upgrading your current case cooling.
Corsair 9000D RGB Airflow Super Full-Tower Case
Corsair 9000D RGB Airflow Super Full-Tower is an expansive 64.2-pound white chassis designed to mount up to four 200mm fans along with 120mm and 140mm units. Noctua gives you an isolated black 200mm fan operating at a low 18.1 dB(A) and 800 RPM. With the 9000D, you gain built-in RGB lighting and a massive frame measuring 27.5 inches tall and wide to house extensive custom cooling loops. You give up the compact 11.2-ounce drop-in format of the standalone Noctua fan. Pick the Corsair 9000D if you need an ultra-scale super full-tower engineered specifically to hold multiple 200mm fans and large multi-radiator setups.
SSUPD Meshroom S V2 SFF Mini-ITX Case
SSUPD Meshroom S V2 is a 15-liter Small Form Factor case weighing 6.83 pounds, supporting Mini-ITX motherboards, 280mm radiators, and Type-C connectivity. In contrast, the Noctua NF-A20 is a 200x30mm PWM fan engineered with 154x154mm, 170x170mm, and 110x180mm mounting holes for quiet 800 RPM airflow. The Meshroom S V2 offers a full compact PC enclosure that fits 200mm fan sizing and full-size hardware inside a 9.72-inch depth. You lose the Noctua model's chromax swappable pads and dedicated low-noise fan motor. Pick the Meshroom S V2 if you want to build a space-saving Mini-ITX system rather than adding an individual fan to your current desktop.
Thermaltake View 290 Curved Glass Mid-Tower
Thermaltake View 290 Curved Glass Mid-Tower provides a 21.1-pound white chassis compatible with 200mm fans, 360mm radiators, long graphics cards, and hidden-connector motherboards. Noctua supplies a single 200mm quiet fan featuring 350 to 800 RPM PWM speed control and an acoustic optimization frame. By selecting the View 290, you get a full mid-tower housing framed by curved glass and tailored for streamlined cable management. You give up the Noctua fan's packaged multi-color vibration pads, 18.1 dB(A) acoustic profile, and direct drop-in usability. Pick the View 290 if you are assembling a clean mid-tower PC from scratch with room for 200mm cooling.
Thermaltake View 390 Air Mid Tower
Thermaltake View 390 Air Mid Tower is an Air White enclosure weighing 28.5 pounds that accommodates 200mm fans, up to eleven fans total, 360mm radiators, and 420mm graphics cards. Noctua offers an individual 200x30mm fan featuring Flow Acceleration Channels, a 30mm depth, and an 800 RPM top speed. The View 390 Air gives you a complete high-airflow mid-tower structure that also accommodates hidden-connector motherboards. You give up the standalone modularity and low 18.1 dB(A) operation of buying a single fan. Pick the View 390 Air if you need a mid-tower case built to accommodate large graphics cards and massive multi-fan airflow setups.
Cooler Master MasterFrame 500 Mesh Case
Cooler Master MasterFrame 500 Mesh is a 22-pound ATX chassis featuring integrated dual 200mm front cooling fans, support for up to seven fans, and 360mm radiator compatibility. Noctua delivers a single standalone 200mm fan equipped with multi-pattern mounting holes and swappable colored pads. The MasterFrame 500 gives you an open-frame structure with dual front 200mm cooling already built in, measuring 21.4 inches tall and 18.5 inches long. You give up the Noctua fan's >150,000-hour MTTF quiet motor and standalone flexibility to install into your existing case. Pick the MasterFrame 500 if you want an open-frame ATX case with pre-installed dual 200mm airflow.
Quick picks
Our 7 picks
Noctua 200mm PWM Case Fan
Best for: quiet cooling in cases with 30mm clearance
- Fan Size
- 200mm
- Dimensions
- 7.87 × 7.87 × 1.18 inches
- Weight
- 11.2 ounces
The Noctua 200mm PWM Quiet Fan is a 200mm computer case fan built for large-format ventilation. It runs at speeds between 350 and 800 RPM using a 4-pin PWM header, generating a maximum acoustic noise level of 18.1 dB(A). It provides 154x154mm, 170x170mm, and 110x180mm mounting hole spacings for varied cases. This unit suits you if you need low-noise airflow with customizable corner pad colors.
Pros
- Maximum acoustic noise rating of 18.1 dB(A)
- Triple mounting hole spacing: 154x154mm, 170x170mm, and 110x180mm
- 4-pin PWM speed control from 350 to 800 RPM
- Includes swappable anti-vibration pads in six colors
- Rated MTTF of over 150,000 hours
Cons
- Frame thickness of 30mm exceeds standard 25mm fan depth
- No integrated RGB or LED lighting included
Good fit if
- You want a 200mm fan with noise levels rated at or below 18.1 dB(A).
- You need 154x154mm, 170x170mm, or 110x180mm mounting hole options.
- You want an all-black design with swappable colored accents.
Skip if
- You have a chassis clearance limited to 25mm fan thickness.
- You require integrated RGB lighting in your cooling fans.
Verdict: Noctua 200mm PWM Quiet Fan delivers wide case compatibility and low 18.1 dB(A) noise levels via its 800 RPM motor. It suits builds that accommodate a 30mm frame and prioritize quiet operation without RGB lights.
Cooler Master HAF 700 EVO E-ATX Full-Tower
Best for: all-in-one 200mm fan full-tower builds
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Included Fans
- 200mm Sickleflow Fans
- Connectivity
- Type-C
- Dimensions
- 26.2 × 11.5 × 24.6 inches
- Weight
- 55.3 pounds
The Cooler Master HAF 700 EVO is a full-tower chassis built for massive airflow setups. It comes equipped with 200mm Sickleflow fans right out of the box, saving you from purchasing separate large-format intake fans. You get support for E-ATX motherboards, front-panel Type-C connectivity, and an integrated IRIS customizable LCD screen. This case fits builders who want native 200mm cooling integrated directly into a heavy-duty enclosure for large component configurations.
Pros
- Includes 200mm Sickleflow fans
- Supports large E-ATX motherboards
- Built-in IRIS customizable LCD display
- Front-panel Type-C connectivity
Cons
- Heavy weight at 55.3 pounds without components
- Large footprint measuring 26.2 inches long and 24.6 inches high
- Offered only in black
Good fit if
- You want 200mm fans pre-installed inside a full-tower chassis.
- You are building a system using an E-ATX motherboard.
- You want built-in tool-less features and a front LCD screen.
Skip if
- You only need a standalone 200mm fan for an existing setup.
- You need a lightweight build that weighs less than 55.3 pounds empty.
- You have limited desk clearance for a 26.2-inch deep enclosure.
Verdict: Cooler Master HAF 700 EVO Full Tower delivers pre-installed 200mm Sickleflow cooling alongside extensive E-ATX hardware space. It is a capable choice if you prefer buying a complete high-airflow chassis over adding standalone 200mm fans to your current setup.
Corsair 9000D RGB Airflow Super Full-Tower Case
Best for: massive multi-radiator and 200mm fan builds
- Case Type
- Super Full-Tower
- Radiator Support
- 480mm
- Fan Size
- 120mm, 140mm, 200mm
- Lighting
- RGB
- Dimensions
- 27.5 × 12.1 × 27.5 inches
- Weight
- 64.2 pounds
View on Amazon: Corsair 9000D RGB Airflow Super Full-Tower Case
The Corsair 9000D RGB Airflow is a super full-tower enclosure engineered for massive cooling configurations. If you want an alternative platform for 200mm fans, this chassis accommodates up to four 200mm units alongside dual 480mm radiators. It features the InfiniRail mounting system and an included iCUE LINK hub. You get 27.5-inch clearance and a high-airflow steel front panel, making it a fit if you plan an ultra-scale custom water-cooling build.
Pros
- Fits up to four 200mm fans or eighteen 120mm fans
- Supports dual 480mm radiators in the front and roof
- Includes an iCUE LINK System Hub for hardware expansion
- InfiniRail system allows flexible 120mm and 140mm fan positioning
Cons
- Weighs 64.2 pounds empty
- Large 27.5-inch height and length require substantial desk space
- InfiniRail sliding rail system specifies 120mm and 140mm fan sizes only
Good fit if
- You need space to mount up to four 200mm case fans.
- You plan a complex liquid-cooling setup with multiple 480mm radiators.
- You use the Corsair iCUE LINK ecosystem to control your build.
Skip if
- You have limited floor or desk space for a 27.5-inch tall chassis.
- You need a lightweight case that is easy to move without assistance.
Verdict: Corsair 9000D RGB Airflow Super Full-Tower delivers unmatched capacity for builders mounting up to four 200mm fans and large custom water loops. Its massive footprint and 64.2-pound weight cater specifically to ultra-scale desktop configurations.
SSUPD Meshroom S V2 SFF Mini-ITX Case
Best for: compact builds using full-size hardware
- Motherboard Support
- ITX, MATX, ATX
- Case Type
- Mini-ITX, SFF
- Side Panel
- Mesh
- Radiator Support
- 240mm, 280mm
- Max GPU Length
- 353mm
- Case Volume
- 15L
The SSUPD Meshroom S V2 is a 15-liter small form factor case designed with breathable mesh panels on all sides. You get an adjustable internal tray that accommodates Mini-ITX, Micro-ATX, and full ATX motherboards alongside SFX or ATX power supplies up to 170mm. It supports front radiators up to 280mm and graphics cards up to 353mm long. This suits you if you want compact desktop hardware with high component flexibility.
Pros
- Compact 15-liter volume with full mesh external panels
- Accepts Mini-ITX, Micro-ATX, and standard ATX motherboards
- Fits graphics cards up to 353mm in length
- Accommodates 240mm or 280mm front liquid cooling radiators
- Includes USB 3.2 Gen 2 Type-C front port at 20 Gbps
Cons
- Requires an extra-length PCIe riser cable for Micro-ATX and ATX motherboards
- Limits CPU cooler height to 74mm
- Requires optional extension feet to fit maximum 353mm graphics card lengths
Good fit if
- You need a 15-liter footprint that still fits an ATX motherboard or power supply.
- You plan to run a 240mm or 280mm front-mounted liquid cooler.
- You use a large four-slot graphics card up to 353mm in length.
Skip if
- You plan to install an air cooler taller than 74mm.
- You do not want to purchase an additional riser cable for non-ITX motherboards.
Verdict: SSUPD Meshroom S V2 Mini-ITX Case delivers 15-liter compact packaging with wide support for standard ATX components and 280mm radiators. It gives you extensive hardware versatility while keeping desk footprint minimal.
Thermaltake View 290 Curved Glass Mid-Tower
Best for: builders using long GPUs and hidden-connector motherboards
- Motherboard Support
- mATX, ATX
- Case Type
- Mid Tower
- Included Fans
- 3x 120mm ARGB Lite
- Radiator Support
- 360mm
- Max GPU Length
- 450mm
- Fan Size
- 200mm
The Thermaltake View 290 Curved Glass Mid Tower is an ATX chassis built around a curved tempered glass front panel. It includes three 120mm ARGB Lite fans and accommodates up to nine 120mm fans or a 360mm radiator. Inside, you get clearance for 450mm graphics cards, 180mm CPU coolers, and back-connect motherboards. It suits you if you want a clean view with room for full-sized hardware.
Pros
- Generous clearance for 450mm graphics cards and 180mm CPU coolers
- Cutouts support hidden-connector motherboards like ASUS BTF and MSI Project Zero
- Preinstalled with three 120mm ARGB Lite cooling fans
- Supports liquid cooling radiators up to 360mm
Cons
- Vertical GPU installation requires a separate PCIe riser cable
- Fan mounting locations are limited to 120mm and 140mm sizes
Good fit if
- You run extra-long graphics cards up to 450mm in length.
- You plan to build with a hidden-connector ATX or mATX motherboard.
- You want curved front tempered glass with preinstalled intake and exhaust fans.
Skip if
- You specifically need chassis mounting rails for 200mm intake fans.
- You expect an included PCIe riser cable for vertical GPU mounting.
Verdict: Thermaltake View 290 Curved Glass Mid Tower delivers exceptional clearance for long GPUs and hidden-connector motherboards behind a seamless curved glass panel. It provides ample 120mm and 140mm fan mounting options for high-airflow component cooling.
Thermaltake View 390 Air Mid Tower
Best for: custom airflow builds using 200mm fans
- Motherboard Support
- mATX, ATX
- Case Type
- Mid Tower
- Side Panel
- Curved Tempered Glass
- Included Fans
- 2x 120mm
- Radiator Support
- 360mm
- Max GPU Length
- 420mm
The Thermaltake View 390 Air is a mid-tower chassis designed for high-airflow cooling setups. It accommodates up to eleven fans, including support for large 200mm fans and 360mm radiators. You get two preinstalled 120mm rear exhaust fans, clearance for 420mm graphics cards, and support for hidden-connector motherboards. This chassis suits you if you plan to install 200mm fans inside a build with curved tempered glass.
Pros
- Supports large chassis fans up to 200mm in size
- Mounts up to eleven total fans and radiators up to 360mm
- Accommodates graphics cards up to 420mm in length
- Compatible with hidden-connector motherboards from ASUS, MSI, and GIGABYTE
- Features a rotatable PCIe tray for vertical GPU placement
Cons
- No 200mm fans included out of the box
- Requires a separate riser cable for vertical GPU mounting
- Limits CPU air cooler height to 160mm
Good fit if
- You plan to mount 200mm intake fans in a mid-tower build.
- You use a long graphics card up to 420mm in length.
- You build with a back-connect motherboard such as ASUS BTF or MSI Project Zero.
Skip if
- You want 200mm fans preinstalled from the factory.
- You use a CPU air cooler taller than 160mm.
Verdict: Thermaltake View 390 Air Mid Tower Case provides expansive cooling flexibility with 200mm fan compatibility, room for eleven fans, and 420mm GPU clearance. It is an effective chassis for builders who want massive airflow paired with modern hidden-connector cable management.
Cooler Master MasterFrame 500 Mesh Case
Best for: high-airflow open-frame E-ATX and ATX builds
- Motherboard Support
- Mini-ITX to E-ATX
- Included Fans
- 2x 200mm
- Radiator Support
- 360mm
- Dimensions
- 18.5 × 10.3 × 21.4 inches
- Weight
- 22 pounds
This open-frame ATX chassis gives you two pre-installed 200mm front intake fans to deliver high airflow directly across your components. It supports motherboards from Mini-ITX up to 305 by 330mm E-ATX, fits up to seven total fans, and accommodates a 360mm radiator. If you want large 200mm fan cooling integrated into an aluminum exo-structure with interchangeable panels for flexible hardware configurations, this case fits your build.
Pros
- Includes two pre-installed 200mm front intake fans
- Supports motherboards up to E-ATX (305 x 330mm)
- Accommodates up to seven fans and a 360mm radiator
- Open-frame aluminum exo-structure with interchangeable panels
Cons
- Weighs 22 pounds unpopulated
- Open-frame exo-structure leaves internal components exposed
Good fit if
- You want pre-installed dual 200mm intake fans built into your case
- You build with large E-ATX motherboards or up to a 360mm radiator
Skip if
- You need a lightweight or compact chassis
- You prefer a fully enclosed case design rather than an open frame
Verdict: Cooler Master MasterFrame 500 Mesh ATX Case delivers integrated dual 200mm front cooling inside a modular open-frame aluminum structure. It provides generous thermal capacity with support for up to seven fans and 360mm radiators.
Specifications side by side
| Spec | Noctua 200mm PWM Case Fan | Cooler Master HAF 700 EVO E-ATX Full-Tower | Corsair 9000D RGB Airflow Super Full-Tower Case | SSUPD Meshroom S V2 SFF Mini-ITX Case | Thermaltake View 290 Curved Glass Mid-Tower | Thermaltake View 390 Air Mid Tower | Cooler Master MasterFrame 500 Mesh Case |
|---|---|---|---|---|---|---|---|
| Motherboard Support | not specified | E-ATX | not specified | ITX, MATX, ATX | mATX, ATX | mATX, ATX | Mini-ITX to E-ATX |
| Case Type | not specified | Full-Tower | Super Full-Tower | Mini-ITX, SFF | Mid Tower | Mid Tower | not specified |
| Side Panel | not specified | not specified | not specified | Mesh | not specified | Curved Tempered Glass | not specified |
| Included Fans | not specified | 200mm Sickleflow Fans | not specified | not specified | 3x 120mm ARGB Lite | 2x 120mm | 2x 200mm |
| Radiator Support | not specified | not specified | 480mm | 240mm, 280mm | 360mm | 360mm | 360mm |
| Max GPU Length | not specified | not specified | not specified | 353mm | 450mm | 420mm | not specified |
| Case Volume | not specified | not specified | not specified | 15L | not specified | not specified | not specified |
| Tower Size | not specified | not specified | Full-Tower | Small Form Factor | Mid-Tower | Mid-Tower | not specified |
| Fan Size | 200mm | 200mm | 120mm, 140mm, 200mm | 200mm | 200mm | 200mm | 200mm |
| Use | not specified | not specified | not specified | Gaming | not specified | not specified | not specified |
| Lighting | not specified | not specified | RGB | not specified | not specified | not specified | not specified |
| Connectivity | not specified | Type-C | not specified | Type-C | not specified | not specified | not specified |
| Compatible Device | not specified | not specified | not specified | not specified | Radiator | Radiator | not specified |
| Dimensions | 7.87 × 7.87 × 1.18 inches | 26.2 × 11.5 × 24.6 inches | 27.5 × 12.1 × 27.5 inches | 9.72 × 6.57 × 14.3 inches | not specified | 19.1 × 11.3 × 19.8 inches | 18.5 × 10.3 × 21.4 inches |
| Weight | 11.2 ounces | 55.3 pounds | 64.2 pounds | 6.83 pounds | 21.1 pounds | 28.5 pounds | 22 pounds |
| Size | 15 Count (Pack of 114) | E-ATX Full-Tower | not specified | not specified | not specified | 19.8" x 11.3" x 19.1" | Large |
| Color | Black | Black | White | PCIE 5.0 200mm(Black) | White | Air White | Black |
| Model | NF-A20PWMchromaxblackswap | H700E-IGNN-S00 | CC-9011274-WW | Meshroom S PCI5 BK | CA-11G-00M6WN-00 | CA-11F-00M6WN-00 | MF500M-KHNN-S00 |
Frequently asked questions
What case supports up to four 200mm fans?
The Corsair 9000D RGB Airflow Super Full-Tower supports up to four 200mm fans. It handles massive custom liquid cooling setups alongside 120mm, 140mm, and 200mm fan sizes. The full-tower chassis weighs 64.2 pounds and measures 27.5 inches long, 12.1 inches wide, and 27.5 inches tall. You get integrated RGB lighting and substantial clearance for multi-radiator configurations.
Are there mid-tower cases that fit 200mm fans and hidden-connector motherboards?
Yes, both the Thermaltake View 290 and Thermaltake View 390 Air support 200mm fans alongside hidden-connector motherboards. The Thermaltake View 390 Air features space for eleven fans, a 360mm radiator, and 420mm GPU clearance in an Air White finish. The Thermaltake View 290 provides curved glass styling, 360mm radiator compatibility, and clearance for long graphics cards.
Can you fit 200mm cooling hardware into a small form factor Mini-ITX build?
Yes, the SSUPD Meshroom S V2 SFF Mini-ITX case supports 200mm fan hardware within a compact 15-liter chassis. It accommodates standard ATX components, Type-C connectivity, and up to a 280mm radiator. The frame measures 9.72 inches long, 6.57 inches wide, and 14.3 inches high with a weight of 6.83 pounds, keeping your desk footprint minimal.
Which open-frame case includes dual 200mm front cooling?
The Cooler Master MasterFrame 500 Mesh includes integrated dual 200mm front cooling. It utilizes a modular open-frame aluminum design that accommodates ATX and E-ATX motherboards. You can mount up to seven cooling fans or install a 360mm radiator. The chassis weighs 22 pounds and measures 18.5 inches long, 10.3 inches wide, and 21.4 inches tall.
How thick is the Noctua 200mm PWM fan compared to standard fans?
The Noctua NF-A20 PWM chromax.black.swap fan has a thickness of 1.18 inches, which equals 30mm. Standard case fans often measure 25mm thick, so you need 30mm of frame clearance in your case. It operates up to 800 RPM with noise levels reaching 18.1 dB(A). The fan measures 7.87 inches wide and long, weighing 11.2 ounces.
What full-tower alternative includes pre-installed 200mm Sickleflow fans?
The Cooler Master HAF 700 EVO full-tower chassis comes equipped with pre-installed 200mm Sickleflow cooling. This setup provides complete high-airflow coverage without needing individual standalone fan purchases. The case supports E-ATX motherboards and front Type-C connectivity. Its heavy 55.3-pound frame measures 26.2 inches long, 11.5 inches wide, and 24.6 inches tall to support extensive component installations.