15 Best PC Cases Under $200, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best PC cases under $200 requires evaluating physical clearance, cooling capability, and motherboard support. For this guide, 15 products were compared based strictly on the specifications published on their listings.
The ASUS TUF Gaming E-ATX Full-Tower Case earns the top recommendation because its full-tower chassis includes four pre-installed fans, E-ATX motherboard support, and woven carry handles for heavy hardware. This comparison helps you decide which case size, internal layout, and drive capacity align with your component requirements.
Quick picks
The best fit for you
- You need an E-ATX case with integrated carry handles ASUS TUF Gaming E-ATX Full-Tower Case Its full-tower chassis supports E-ATX motherboards and includes woven carry handles plus four pre-installed cooling fans.
- You want the smallest Mini-ITX chassis for compact setups Fractal Design Terra Mini-ITX Case This 10.4-liter Mini-ITX enclosure weighs 8.82 pounds and fits graphics cards up to 322 mm long.
- You want sound dampening and modular panel configurations be quiet! Silent Base 802 ATX Midi Tower It features thick insulation mats, three included fans, and an invertible motherboard tray for ATX builds.
- You want an ATX server chassis for equipment racks SilverStone 2U ATX Rackmount Server Chassis Its 2U rack-mountable profile fits standard ATX motherboards inside a 3.48-inch height enclosure.
Our 15 picks
ASUS TUF Gaming E-ATX Full-Tower Case
Best for: Heavy E-ATX builds requiring integrated carry handles
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Side Panel
- Tempered Glass
- Radiator Support
- 360mm
- Use
- Gaming
- Dimensions
- 215 × 98.8 × 217 inches
This ASUS TUF Gaming full-tower chassis accommodates motherboards up to E-ATX. You get four pre-installed fans, including three 120mm RGB fans and one 140mm rear PWM fan, alongside support for 360mm radiators at the top or front. Integrated woven-cotton carry handles support up to 65 pounds. It suits you if you need expansive hardware clearance, out-of-the-box cooling coverage, and built-in handles for moving a heavy build.
Pros
- Includes four fans: three 120mm front RGB fans and one 140mm rear PWM fan
- Supports dual 360mm radiator placements in top and front positions
- Integrated woven-cotton handles rated for up to 65 lbs
- Accommodates motherboards up to E-ATX form factor
Cons
- Weighs 26.2 lbs before installing components
- Limited to seven standard expansion slots despite full-tower sizing
Good fit if
- You need support for an E-ATX motherboard and liquid cooling setups.
- You want included RGB and PWM fans without buying extra cooling units.
- You require physical carry handles to move your finished system.
Skip if
- You want a lightweight, compact chassis for a smaller desk footprint.
- You prefer a plain aesthetic without pre-patterned metal chassis accents.
Verdict: ASUS TUF Gaming E-ATX Full-Tower Case delivers extensive liquid cooling support and four pre-installed fans inside a rugged chassis with woven carry handles. It provides plenty of room for large components while simplifying transport.
Fractal Design Torrent Compact ATX Mid-Tower
Best for: air-cooled ATX gaming builds
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Use
- Gaming
- Lighting
- RGB
- Connectivity
- Type-C
View on Amazon: Fractal Design Torrent Compact ATX Mid-Tower
The Fractal Design Torrent Compact ATX Mid-Tower is a mid-tower chassis built for high airflow. You get 180 by 38 mm Prisma ARGB PWM intake fans behind an open front grille, paired with a top-mounted power supply shroud. Measuring 18.4 inches tall and 17.7 inches long, it accommodates standard ATX motherboards and includes front Type-C connectivity. This case fits your setup if you want direct air cooling for high-power hardware.
Pros
- Thick 180 x 38 mm front intake fans with an open grille layout
- Base air intakes supporting bottom fan installation
- Top-mounted power supply shroud with integrated ARGB lighting
- Front I/O equipped with Type-C connectivity
Cons
- Bottom fan clearance requires leaving the lowest PCI slot empty
- Motherboard support limited to standard ATX size
Good fit if
- You want high front-intake airflow driven by 180 mm fans.
- You build with a standard ATX motherboard.
- You want a light-tint tempered glass panel with integrated ARGB.
Skip if
- You need a chassis that accommodates motherboards larger than ATX.
- You plan to populate the bottom PCI slot alongside bottom intake fans.
Verdict: Fractal Design Torrent Compact ATX Mid-Tower delivers focused component cooling with its 180 mm front fan setup and open grille interior. It provides a practical ATX footprint optimized for air movement across key hardware.
be quiet! Silent Base 802 ATX Midi Tower
Best for: modular configurations and sound dampening
- Motherboard Support
- ATX
- Case Type
- Midi Tower
- Included Fans
- 3 installed fans
- Dimensions
- 21.2 × 11.1 × 21.8 inches
- Weight
- 27.8 pounds
The be quiet! Silent Base 802 is an ATX midi tower designed for adaptable setups. You get three pre-installed fans, extra thick sound insulation mats, and interchangeable top and front panels for cooling or silence. Its decoupled motherboard tray supports standard or inverted layouts, while the front I/O includes a fan controller and USB 3.2 Gen. 2 Type C. It suits you if you want modular layout options and sound dampening.
Pros
- Three pre-installed fans included out of the box
- Interchangeable top and front panels for airflow or silence
- Decoupled motherboard tray supports an inverted layout
- Thick insulation mats enhance noise reduction
- I/O panel includes a fan controller and USB 3.2 Gen. 2 Type C
Cons
- Heavy chassis weighing 27.8 pounds
- Large footprint measuring 21.8 inches tall and 11.1 inches wide
Good fit if
- You want an invertible motherboard tray for custom placement.
- You alternate between open airflow panels and sound-dampened covers.
- You require front-panel fan control and USB 3.2 Gen. 2 Type C connectivity.
Skip if
- You need a lightweight case rather than a 27.8-pound frame.
- You have limited space for a wide 11.1-inch chassis.
Verdict: be quiet! Silent Base 802 ATX Midi Tower delivers modularity through swappable panels and an invertible motherboard tray. Its thick insulation mats and three included fans provide versatile options for silent running or airflow.
SilverStone 2U ATX Rackmount Server Chassis
Best for: rackmount server builds using standard ATX parts
- Case Type
- 2U Rackmount
- Motherboard Support
- ATX
- Use
- Server
- Dimensions
- 22.8 × 16.9 × 3.48 inches
- Weight
- 15 pounds
This SilverStone unit is a 2U rackmount server chassis designed for standard ATX motherboards and power supplies up to 180mm deep. You get two 5.25-inch front drive bays, five internal 3.5-inch hard drive mounts, and one 2.5-inch SSD bracket. A built-in cooling bracket holds up to three 80mm fans. It suits you if you need compact, rack-mounted enterprise storage using standard desktop PC components.
Pros
- Accommodates standard ATX motherboards and ATX power supplies up to 180mm depth
- Broad storage capacity with five 3.5-inch drive mounts and one 2.5-inch bay
- Dual 5.25-inch expansion bays for front-facing devices or drives
- Front panel includes 5Gbps USB 3.1 Gen1 interface
Cons
- Fan bracket limited strictly to 80mm fans rather than 120mm mounts
- Restricted 3.48-inch height limits expansion card and cooler clearance
Good fit if
- You need a 2U rackmount chassis compatible with standard ATX hardware
- You require dual 5.25-inch front bays along with multiple internal 3.5-inch drives
Skip if
- You want a conventional vertical tower chassis for a desktop setup
- You plan to cool your components with 120mm or larger case fans
Verdict: SilverStone 2U Rackmount ATX Server Chassis delivers dense server storage with standard ATX component compatibility. Its slim rack-mountable frame provides flexible multi-drive options for industrial and network racks.
Lian Li Lancool 205 Mesh Mid-Tower Case
Best for: standard ATX gaming builds wanting included airflow
- Motherboard Support
- ATX, Micro ATX, Mini-ITX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Use
- Gaming
- Lighting
- ARGB
- Dimensions
- 29.2 × 29.2 × 11.6 inches
The Lian Li LANCOOL 205 Mesh is a mid-tower case built for standard ATX, Micro ATX, and Mini-ITX motherboards. It includes a mesh front panel along with three pre-installed ARGB PWM fans: two 140mm intakes and one 120mm exhaust. A tempered glass side panel displays internal components, while built-in top controls handle lighting modes. It suits you if you need balanced airflow and simple fan control in a standard footprint.
Pros
- Three pre-installed ARGB PWM fans with two 140mm front intakes
- Mesh front panel with top and bottom magnetic dust filters
- Dedicated top C/M button for lighting modes and motherboard sync
- Swappable top fan bracket and removable SSD mounting brackets
Cons
- No USB Type-C port on the front I/O panel
- Motherboard support limited to standard ATX, mATX, and Mini-ITX
Good fit if
- You want pre-installed 140mm and 120mm ARGB PWM fans ready to run.
- You use a standard ATX, Micro ATX, or Mini-ITX motherboard.
- You prefer hardware buttons on the chassis to switch lighting profiles.
Skip if
- You need native USB Type-C connectivity on the top panel.
- You plan to install an oversized E-ATX motherboard.
Verdict: Lian Li LANCOOL 205 Mesh Mid-Tower Case delivers solid stock airflow through its three included ARGB PWM fans and ventilated front panel. It provides straightforward component installation and hardware visibility for standard ATX builds.
Fractal Design Terra Mini-ITX Case
Best for: compact Mini-ITX small-form-factor gaming builds
- Motherboard Support
- Mini ITX
- Case Type
- Small Form Factor
- Max GPU Length
- 322 mm
- Case Volume
- 10.4 L
- Use
- Gaming
- Connectivity
- Type-C
The Fractal Design Terra is a 10.4-liter small-form-factor case built for Mini-ITX systems. You get an anodized aluminum exterior with a solid walnut accent, front USB Type-C 20Gbps connectivity, and support for graphics cards up to 322 mm long. A stepless, slidable central spine gives you 30 mm of internal adjustment space. It suits you if you want a compact desk footprint without sacrificing full-length gaming graphics card compatibility.
Pros
- Compact 10.4 L volume accommodating GPUs up to 322 mm
- Slidable central spine provides 30 mm of internal flexibility
- Front panel includes a 20Gbps USB Type-C port
- Solid walnut front accent paired with an anodized aluminum frame
Cons
- Supports only Mini-ITX motherboards
- GPU clearance strictly limited to 322 mm in length
Good fit if
- You plan to build with a Mini-ITX motherboard.
- You need a small-footprint 10.4 L chassis that fits graphics cards up to 322 mm.
- You want high-speed front connectivity with a 20Gbps USB Type-C port.
Skip if
- You intend to use an ATX or Micro-ATX motherboard.
- You require space for graphics cards exceeding 322 mm in length.
Verdict: Fractal Design Terra Mini-ITX Case provides a space-saving 10.4-liter chassis with an adjustable internal spine and clearance for graphics cards up to 322 mm.
Lian Li LANCOOL II Mesh C Mid-Tower Case
Best for: high-airflow builds with extensive drive storage
- Motherboard Support
- E-ATX
- Case Type
- Mid Tower
- Side Panel
- 4mm Tempered Glass
- Included Fans
- 2x 140mm PWM, 1x 120mm PWM
- Dimensions
- 22 × 22 × 12 inches
- Weight
- 26.5 pounds
This mid-tower steel case accommodates motherboards up to E-ATX and comes with three pre-installed PWM fans, including two 140mm front intakes and one 120mm rear exhaust. It features 4mm tempered glass side panels, flip-down shroud panels, and storage mounts for up to nine drives. A multi-way mounting bracket supports custom radiator configurations. It suits you if you need extensive drive capacity and flexible cooling options in a standard tower footprint.
Pros
- Includes two 140mm front PWM fans and one 120mm rear PWM fan
- Supports motherboards up to E-ATX form factor
- Mounts up to nine drives with modular cage and SSD bays
- Multi-way bracket offers four radiator and fan layout options
Cons
- Heavy chassis weight at 26.5 pounds
- Wide 22-inch profile requires significant surface space
Good fit if
- You want pre-installed 140mm and 120mm PWM fans out of the box.
- You need internal mounting capacity for up to nine storage drives.
- You plan to build your system around an E-ATX motherboard.
Skip if
- You need a lightweight chassis under 20 pounds for easy transport.
- You have a small workspace that cannot fit a 22-inch wide case.
Verdict: Lian Li LANCOOL II Mesh C Mid-Tower provides strong stock airflow via three PWM fans, broad E-ATX support, and modular storage space for up to nine drives.
Lian Li LANCOOL III E-ATX Mid-Tower Case
Best for: spacious high-airflow builds and large graphics cards
- Motherboard Support
- E-ATX, ATX, Micro-ATX, Mini-ITX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4 x 140mm PWM
- Use
- Gaming
- Lighting
- RGB
The Lian Li LANCOOL III is a mid-tower chassis built with a steel frame, fine mesh panels, and 4.0mm hinged tempered glass doors. It includes four 140mm PWM fans and supports motherboards up to E-ATX under 280mm wide. You get room for up to 12 2.5-inch drives and clearance for large graphics cards. This layout suits you if you need high airflow and component capacity.
Pros
- Includes four 140mm PWM fans
- Supports E-ATX motherboards up to 280mm wide
- Hinged 4.0mm tempered glass doors and magnetic cable covers
- Holds up to twelve 2.5-inch SSDs or four 3.5-inch HDDs and eight SSDs
Cons
- Total weight is heavy at 31.1 pounds
- E-ATX support is restricted to motherboards under 280mm wide
Good fit if
- You want four pre-installed 140mm PWM fans
- You need mounting space for up to twelve storage drives
- You plan to house a large modern graphics card
Skip if
- You require a lightweight case under 30 pounds
- You run an E-ATX motherboard wider than 280mm
Verdict: Lian Li LANCOOL III E-ATX Mid-Tower Case delivers generous cooling capacity and accessible hinged panels for component-heavy systems. It is an ideal pick if you require high airflow paired with broad drive support.
RackChoice 4U Rackmount Server Chassis
Best for: rackmount server builds needing high drive capacity
- Motherboard Support
- ATX, microATX
- Case Type
- 4U Rack mount
- Included Fans
- 1 x 12cm
- Use
- Server
- Dimensions
- 17.7 × 19 × 7 inches
- Weight
- 26.4 pounds
This 19-inch 4U rackmount chassis is built for rack-based setups using standard ATX or microATX motherboards. It accommodates standard ATX PS-2 power supplies and offers extensive storage with three 5.25-inch external bays, eight 3.5-inch internal bays, and two 2.5-inch bays. You also get a locking aluminum front door with dust filters and one pre-installed 120mm cooling fan, making it a practical option if you need organized server rack storage.
Pros
- Supports standard ATX and microATX motherboards plus standard ATX PS-2 power supplies
- Generous drive capacity with three 5.25-inch, eight 3.5-inch, and two 2.5-inch bays
- Aluminum front bezel features a security keylock and easy-maintenance dust filter
- Front panel includes two USB 3.0 ports with a USB 2.0 adapter
Cons
- Does not support 14TB or larger hard drives
- Includes only one 120mm fan, leaving the two 60mm fan mounts empty
- Heavy chassis weighing 26.4 pounds unpopulated
Good fit if
- You need a 4U rackmount chassis that fits standard ATX or microATX hardware.
- You require front-locking security alongside multiple 5.25-inch and 3.5-inch drive bays.
- You want a rack case compatible with standard ATX PS-2 power supplies.
Skip if
- You plan to install 14TB or higher-capacity hard drives.
- You prefer a conventional freestanding desktop tower over a 19-inch rack unit.
Verdict: RackChoice 4U Rackmount Server Chassis delivers dedicated rack storage with extensive drive bay options and physical keylock security. It provides standard ATX component compatibility in a heavy-duty zinc-coated steel enclosure.
Enthoo Pro ATX Full Tower Case
Best for: windowless, full-tower ATX computer builds
- Motherboard Support
- ATX
- Case Type
- Full Tower
The Enthoo Pro ATX Full Tower Case gives you a steel and plastic chassis built for standard ATX motherboards. It features a bottom-mounted power supply layout, included dust filters to limit internal debris, and a solid side panel without a window. If you prioritize internal hardware space and a clean, non-windowed exterior for your setup, this full-tower enclosure provides the footprint you need for an understated, enclosed system build.
Pros
- Full-tower chassis fits standard ATX motherboards
- Built-in dust filters help keep internal components clean
- Bottom-mounted power supply orientation
- Steel and plastic construction with an enclosed, windowless design
Cons
- Lacks a side panel window to display internal components
- Motherboard support in specifications is limited to ATX
Good fit if
- You want a full-tower chassis designed for standard ATX motherboards.
- You prefer an enclosed, windowless case design with dust filters.
Skip if
- You want a transparent side panel window to view your components.
- You need a compact mid-tower or small-form-factor case footprint.
Verdict: Enthoo Pro ATX Full Tower Case delivers a spacious, windowless steel and plastic chassis equipped with dust filters and a bottom PSU mount. It suits builders seeking a full-sized ATX enclosure focused on utility rather than interior display.
Phanteks Enthoo Pro 2 Server Full Tower
Best for: SSI-EEB server and dense storage builds
- Motherboard Support
- SSI-EEB
- Case Type
- Full Tower
- Side Panel
- Closed Panel
- Radiator Support
- 480mm, 360mm
- Use
- Server
- Dimensions
- 22.1 × 9.45 × 22.8 inches
The Phanteks Enthoo Pro 2 Server Edition is a full tower chassis built for server and workstation hardware. It supports SSI-EEB motherboards, 11 PCI slots, and liquid cooling setups with 480mm and 360mm radiators. Inside, you can mount up to 15 cooling fans along with 10 HDDs or 11 SSDs. This case suits you if you need massive expansion and storage capacity inside a closed-panel enclosure.
Pros
- Supports SSI-EEB server motherboards and 11 PCI expansion slots
- Mounts up to 15 cooling fans, including three over the CPU and PCI areas
- Holds up to 10 HDDs or 11 SSDs for dense storage configurations
- Accommodates large liquid cooling setups with 480mm and 360mm radiators
Cons
- Heavy empty chassis weight of 29.1 pounds
- Solid side panel lacks an interior viewing window
- Large physical footprint measuring 22.8 inches tall and 22.1 inches long
Good fit if
- You need to install an SSI-EEB motherboard with multi-GPU or multi-card setups.
- You plan to run a high-capacity storage build with up to 10 HDDs or 11 SSDs.
- You want extensive cooling capacity with space for up to 15 fans.
Skip if
- You want a tempered glass window panel to show internal components.
- You have limited workspace for a case that stands 22.8 inches tall.
- You need a lightweight chassis that is easy to transport.
Verdict: Phanteks Enthoo Pro 2 Server Full Tower provides expansive space for SSI-EEB motherboards, 11 PCI cards, and up to 15 fans. It delivers high-density capacity for serious workstation and server builds.
Fractal Design North XL Mesh Full-Tower Case
Best for: Spacious high-airflow builds using large hardware
- Motherboard Support
- E-ATX, ATX, mATX, mITX
- Case Type
- Full Tower
- Side Panel
- Mesh
- Radiator Support
- 420mm
- Max GPU Length
- 413mm
- Fan Size
- 140mm
View on Amazon: Fractal Design North XL Mesh Full-Tower Case
The Fractal Design North XL Mesh is a full-tower PC chassis designed for high airflow and expansive hardware setups. You get support for motherboards ranging from mITX up to E-ATX, along with room for graphics cards up to 413 mm long. It includes three 140 mm Aspect PWM fans and accepts front radiators up to 420 mm. This setup suits you if you build high-power rigs needing massive cooling volume.
Pros
- Supports radiators up to 420 mm in front and 360 mm on top
- Includes three 140 mm Aspect PWM fans
- Accommodates graphics cards up to 413 mm long
- Compatible with E-ATX, ATX, mATX, and mITX motherboards
Cons
- Mesh side panel provides no clear view of internal components
- Maximum graphics card clearance drops to 380 mm with a front 420 mm radiator
Good fit if
- You need room for large components like an E-ATX motherboard or 420 mm radiator.
- You want three pre-installed 140 mm PWM fans for out-of-the-box airflow.
- You plan to install extra-long graphics cards up to 413 mm.
Skip if
- You prefer a transparent window panel to display internal components.
- You need a smaller chassis footprint for tight desk spaces.
Verdict: Fractal Design North XL Mesh Full Tower delivers massive component clearance and high airflow for large hardware builds. Its mesh side panel and extensive radiator mounting options make it a capable full-tower choice.
Montech King 95 Pro Curved ATX Case
Best for: Dual-chamber setups needing out-of-the-box cooling
- Motherboard Support
- ATX, Micro-ATX, Mini-ITX
- Side Panel
- Tempered Glass
- Included Fans
- 2x 140mm, 4x 120mm ARGB
- Radiator Support
- 360mm
- Max GPU Length
- 420mm
- Dimensions
- 17.4 × 11.8 × 18.7 inches
The Montech King 95 Pro is a dual-chamber ATX mid-tower case featuring curved tempered glass panels and an included interchangeable mesh front. You get six pre-installed ARGB fans wired to a 10-port hub, support for graphics cards up to 420 mm, and room for five 3.5-inch or eight 2.5-inch drives. It suits you if you want a complete cooling setup and high component clearance straight out of the box.
Pros
- Six pre-installed ARGB fans with an included 10-port controller
- Accommodates GPUs up to 420 mm and CPU coolers up to 175 mm
- Curved 4 mm tempered glass panels with tool-free quick release
- Includes alternative mesh panel and top mounting for 360 mm radiators
Cons
- Weighs 26.1 pounds empty
- No support for E-ATX motherboards
- Side radiator support maxes out at 240 mm
Good fit if
- You want pre-installed cooling with six ARGB fans and a dedicated fan hub.
- You plan to install long graphics cards up to 420 mm.
- You want curved glass styling alongside an alternative mesh panel option.
Skip if
- You require an E-ATX motherboard for your build.
- You plan to mount a 280 mm or 360 mm radiator on the side bracket.
- You need a lightweight chassis that is easy to move.
Verdict: Montech King 95 Pro Curved ATX Case provides comprehensive out-of-the-box airflow with six ARGB fans and clear curved glass viewing. Its dual-chamber design easily accommodates long GPUs and multiple storage drives.
Jonsbo Curved Glass ATX Mid-Tower
Best for: curved glass showcase builds using large GPUs
- Motherboard Support
- ATX, MATX, Mini-ITX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Radiator Support
- 360mm, 280mm
- Max GPU Length
- 405 mm
- Dimensions
- 11.8 × 17 × 16 inches
The Jonsbo Curved Glass ATX Mid-Tower Case features a dual-chamber layout encased in an aluminum alloy shell and a seamless curved tempered glass panel. Inside, you get clearance for graphics cards up to 405mm, CPU coolers up to 165mm, and radiators up to 360mm on the top or bottom. This layout suits you if you want a panoramic hardware display with room for large components and USB-C connectivity.
Pros
- Accommodates graphics cards up to 405mm and power supplies up to 220mm
- Supports 360mm radiators on both the top and bottom panels
- Continuous 4mm curved tempered glass wrap-around panel
- Front I/O features a USB 3.2 Gen 2 Type-C port
Cons
- Storage capacity is limited to a maximum of two drives
- Does not include pre-installed cooling fans
Good fit if
- You want a curved tempered glass chassis that displays your components without a front corner post.
- You plan to build with a long graphics card up to 405mm and a 360mm liquid cooler.
- You want front-panel USB 3.2 Gen 2 Type-C connectivity.
Skip if
- You need mounting space for more than two storage drives.
- You prefer a case that includes stock cooling fans in the box.
Verdict: Jonsbo Curved Glass ATX Mid-Tower Case delivers an expansive view of internal components alongside generous clearance for modern high-end graphics cards and dual 360mm radiators. Its two-drive maximum and absence of pre-installed fans mean it works best for builders adding their own dedicated cooling setup.
Montech King 95 Pro Curved ATX Mid-Tower
Best for: panoramic showcase builds with high drive counts
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Curved Tempered Glass
- Included Fans
- 6 ARGB
- Radiator Support
- 360mm
- Dimensions
- 18.7 × 17.4 × 11.8 inches
The Montech King 95 Pro Curved ATX Mid-Tower gives you a panoramic view via 4mm curved tempered glass. It includes six ARGB fans and an adjustable side fan bracket that rotates to the front. The dual-chamber chassis houses ATX motherboards, up to eight hard drives, and 360mm top radiators. With 35mm of rear cable clearance and 175mm CPU cooler clearance, it suits hardware builds requiring extensive cooling and storage.
Pros
- Six included ARGB fans
- 4mm curved tempered glass panoramic panel
- Rotatable side fan bracket for redirected airflow
- Support for up to eight hard drives and dual power supplies
- Clearance for 175mm CPU coolers and 360mm top radiators
Cons
- Heavy 26.1-pound unbuilt weight
- Wide 17.4-inch footprint takes up substantial desk space
- Motherboard support tops out at standard ATX
Good fit if
- You want six pre-installed ARGB fans ready on arrival.
- You plan to mount up to eight storage drives or dual power supplies.
- You need clearance for tall 175mm CPU air coolers.
Skip if
- You require an E-ATX form factor motherboard.
- You have limited desk width for a 17.4-inch wide chassis.
- You want a lightweight enclosure under 20 pounds.
Verdict: Montech King 95 Pro Curved ATX Mid-Tower delivers broad hardware support and six included ARGB fans behind seamless curved glass. Its dual-chamber design provides unmatched multi-drive and dual power supply utility.
Specifications side by side
| Spec | ASUS TUF Gaming E-ATX Full-Tower Case | Fractal Design Torrent Compact ATX Mid-Tower | be quiet! Silent Base 802 ATX Midi Tower | SilverStone 2U ATX Rackmount Server Chassis | Lian Li Lancool 205 Mesh Mid-Tower Case | Fractal Design Terra Mini-ITX Case | Lian Li LANCOOL II Mesh C Mid-Tower Case | Lian Li LANCOOL III E-ATX Mid-Tower Case | RackChoice 4U Rackmount Server Chassis | Enthoo Pro ATX Full Tower Case | Phanteks Enthoo Pro 2 Server Full Tower | Fractal Design North XL Mesh Full-Tower Case | Montech King 95 Pro Curved ATX Case | Jonsbo Curved Glass ATX Mid-Tower | Montech King 95 Pro Curved ATX Mid-Tower |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motherboard Support | E-ATX | ATX | ATX | not specified | ATX, Micro ATX, Mini-ITX | Mini ITX | E-ATX | E-ATX, ATX, Micro-ATX, Mini-ITX | ATX, microATX | ATX | SSI-EEB | E-ATX, ATX, mATX, mITX | ATX, Micro-ATX, Mini-ITX | ATX, MATX, Mini-ITX | ATX |
| Case Type | Full-Tower | Mid Tower | Midi Tower | 2U Rackmount | Mid-Tower | Small Form Factor | Mid Tower | Mid-Tower | 4U Rack mount | Full Tower | Full Tower | Full Tower | not specified | Mid-Tower | Mid-Tower |
| Side Panel | Tempered Glass | Tempered Glass | not specified | not specified | Tempered Glass | not specified | 4mm Tempered Glass | Tempered Glass | not specified | not specified | Closed Panel | Mesh | Tempered Glass | Tempered Glass | Curved Tempered Glass |
| Included Fans | not specified | not specified | 3 installed fans | not specified | not specified | not specified | 2x 140mm PWM, 1x 120mm PWM | 4 x 140mm PWM | 1 x 12cm | not specified | not specified | not specified | 2x 140mm, 4x 120mm ARGB | not specified | 6 ARGB |
| Radiator Support | 360mm | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 480mm, 360mm | 420mm | 360mm | 360mm, 280mm | 360mm |
| Max GPU Length | not specified | not specified | not specified | not specified | not specified | 322 mm | not specified | not specified | not specified | not specified | not specified | 413mm | 420mm | 405 mm | not specified |
| Case Volume | not specified | not specified | not specified | not specified | not specified | 10.4 L | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Tower Size | Full-Tower | Mid-Tower | not specified | not specified | Mid-Tower | not specified | Mid-Tower | not specified | not specified | Full-Tower | not specified | Full-Tower | not specified | Mid-Tower | Mid-Tower |
| Fan Size | not specified | not specified | not specified | not specified | not specified | not specified | 140mm | not specified | not specified | not specified | not specified | 140mm | not specified | not specified | not specified |
| Use | Gaming | Gaming | not specified | Server | Gaming | Gaming | not specified | Gaming | Server | not specified | Server | Gaming | not specified | not specified | not specified |
| Lighting | not specified | RGB | not specified | not specified | ARGB | not specified | not specified | RGB | not specified | not specified | not specified | not specified | ARGB | not specified | ARGB |
| Connectivity | not specified | Type-C | not specified | not specified | not specified | Type-C | not specified | not specified | not specified | not specified | not specified | Type-C | not specified | not specified | not specified |
| Dimensions | 215 × 98.8 × 217 inches | 17.7 × 8.74 × 18.4 inches | 21.2 × 11.1 × 21.8 inches | 22.8 × 16.9 × 3.48 inches | 29.2 × 29.2 × 11.6 inches | 13.5 × 6.02 × 8.58 inches | 22 × 22 × 12 inches | 25.9 × 23 × 12.9 inches | 17.7 × 19 × 7 inches | not specified | 22.1 × 9.45 × 22.8 inches | 19.8 × 9.4 × 20 inches | 17.4 × 11.8 × 18.7 inches | 11.8 × 17 × 16 inches | 18.7 × 17.4 × 11.8 inches |
| Weight | 26.2 pounds | 20.9 pounds | 27.8 pounds | 15 pounds | 15.5 pounds | 8.82 pounds | 26.5 pounds | 31.1 pounds | 26.4 pounds | not specified | 29.1 pounds | 11 pounds | 26.1 pounds | not specified | 26.1 pounds |
| Size | EATX | ATX | not specified | 2U | Mid-tower Case | mITX | not specified | Mid-tower Case | not specified | not specified | not specified | XL | King 95 Pro | not specified | not specified |
| Color | GT501|Grey | RGB Black - Light tint | Black | silver | LANCOOL 205 MESH RGB - ATX - Black | Silver | Black | Black | black | Black | Closed Panel | Chalk White | King 95 pro White | WHITE | Black |
| Model | GT501/GRY/WITH HANDLE | FD-C-TOR1C-02 | BG039 | CAS-SILV-SST/RM23502 | G99OE764X00 | FD-C-TER1N-02 | LAN2MPX.50 | PC-LAN3RX | not specified | CA2626320 | PH-ES620PC_BK02 | FD-C-NOR1X-03 | KING 95 PRO (W) | tk-2 white | KING 95 PRO BLACK US |
Hardware Trade-Offs Under $200 Cases
When shopping Under $200, you must choose between specialized functions rather than receiving every convenience in a single chassis. Motherboard support varies widely, with compact cases accommodating only Mini-ITX or Micro-ATX motherboards instead of standard E-ATX boards. Front-panel Type-C connectivity is omitted from several configurations. Furthermore, side panel designs divide between solid steel panels, open mesh, and tempered glass. Built-in RGB lighting is also absent on many models, requiring you to verify cooling setups, port options, and frame dimensions directly against your planned build.
- Connectivity: Front Type-C ports are omitted on several chassis.
- Lighting: Integrated RGB or ARGB accents are missing from multiple enclosures.
- Motherboard support: Compact designs restrict installation to Mini-ITX or Micro-ATX formats.
- Side panel: Basic steel panels replace tempered glass on utility and server models.
When you match maximum enclosure depth to hardware dimensions, compare wattage ratings across the best PC power supplies under 200.
How We Selected These Cases
You find 15 PC cases on this list from listings matching Under $200. Each entry relies strictly on published manufacturer specifications and component clearances. You see only one variant per product family to prevent duplicates. Products are not physically handled. You can evaluate each option through its published dimensions, motherboard support, and fan configurations.
The page displays products in stock first. Availability refreshes at least daily to keep data current. Because listings move into or out of Under $200 over time, the selection changes automatically. You always receive direct spec comparisons for available hardware during 2026.
Choosing the Right PC Case for Your Build
-
Match Motherboard Form Factor
You must verify the motherboard form factor before purchasing your case. Standard ATX motherboards fit common mid-towers, while oversized E-ATX boards require dedicated mounting points and expanded internal clearance. Choosing a case that matches your exact board size ensures proper standoff alignment and cable pass-through access. For oversized systems, the Fractal Design North XL Mesh Full-Tower Case provides official E-ATX support along with wide interior space. Check your motherboard dimensions against published chassis specifications to prevent component overhang and blocked grommets.
-
Evaluate Side Panel Materials
Side panel materials determine internal visibility, exterior durability, and passive ventilation. Tempered glass lets you view internal components and lighting, but solid metal panels offer durable containment without showing cable routing. Windowless designs also eliminate reflections and prevent panel breakage. For an enclosed build that prioritizes straightforward utility over visual display, the Enthoo Pro ATX Full Tower Case features windowless steel and plastic construction. Review the side panel spec to decide whether you want a display chassis or a closed steel shell for daily use.
-
Assess Noise Dampening Features
Acoustic isolation specs matter if you run hardware in quiet workspaces. Cases built for silence use dense internal dampening materials on panels to suppress mechanical vibration and coil whine. Look for chassis models with swappable panels if you want the flexibility to prioritize airflow during intensive workloads. The be quiet! Silent Base 802 ATX Midi Tower includes thick insulation mats alongside interchangeable panels and an invertible motherboard tray. Check whether the chassis offers solid sound-dampened covers or ventilated grilles so you can configure system noise according to your preference.
-
Check Component Length Clearances
Compact enclosures save desk space, but small-form-factor builds strictly constrain your component dimensions. When choosing a small chassis, check the maximum supported graphics card length and chassis liter volume. A compact frame requires accurate planning to ensure your GPU and power supply fit inside without structural interference. The Fractal Design Terra Mini-ITX Case provides a 10.4-liter footprint while officially accommodating graphics cards up to 322 mm via its adjustable internal spine. Compare your graphics card length against the chassis clearance spec before selecting an ultra-compact enclosure.
-
Verify Front Panel Connectivity
Front I/O configurations dictate how easily you can attach high-speed peripherals and modern devices. Not all cases provide high-speed Type-C ports on the exterior panel. If you frequently transfer data to external drives or connect modern accessories, check the chassis specifications for dedicated Type-C support. The Fractal Design Torrent Compact ATX Mid-Tower features a front-panel Type-C port alongside its standard audio and USB connections. Always inspect the case connectivity list and confirm that your motherboard has the matching internal header required to power the front ports.
-
Inspect Liquid Cooling Radiator Space
If you plan to run an all-in-one liquid cooler or a custom liquid loop, verify internal radiator support. Multi-radiator builds require specific internal dimensions so thick radiators and fans do not collide with memory modules or motherboard heatsinks. The Jonsbo Curved Glass ATX Mid-Tower supports dual 360mm radiators, providing dedicated mounting room for extensive cooling loops alongside large graphics cards. Check the chassis specifications for exact radiator size limits and mounting locations before selecting your cooling setup.
Frequently asked questions
Which PC cases support E-ATX motherboards?
Several options accommodate E-ATX motherboards, including the ASUS TUF Gaming Full-Tower, Fractal Design North XL Mesh, Lian Li LANCOOL II Mesh C, and Lian Li LANCOOL III. E-ATX boards require extra internal width beyond standard ATX chassis dimensions. Selecting these models ensures standoff alignment and clearance for extended board edges without obstructing standard cable routing grommets.
Can you mount standard ATX hardware in a server rack chassis?
Yes, dedicated rackmount chassis accommodate standard ATX desktop hardware inside equipment racks. The SilverStone 2U and RackChoice 4U chassis support standard ATX components while fitting into rack setups. A 2U chassis measures 3.48 inches in height, whereas a 4U enclosure provides 7 inches of height, giving you increased vertical clearance for larger expansion cards and multiple drive bays.
How do dual-chamber PC cases help with component layout?
Dual-chamber cases separate core computing hardware from secondary components like storage drives and power supplies. In models like the Montech King 95 Pro, the main compartment displays the motherboard and graphics card behind curved glass, while drives and cables sit behind the motherboard tray. This physical layout eliminates visible cable clutter and keeps airflow paths open across heat-generating parts.
What should you consider before choosing a portable Micro-ATX case?
You must verify internal component dimensions and total system weight before choosing a compact chassis. The Mechanic Master Portable Micro-ATX Case features a 17.9-liter layout, a built-in handle, and weighs 7.72 pounds. Because its dimensions measure 7.3 inches wide, 11.2 inches high, and 13.4 inches long, you must confirm your graphics card and power supply fit inside the compact enclosure.
Which PC cases include front-panel USB Type-C ports?
Front-panel USB Type-C connectivity is available on models like the Fractal Design Torrent Compact, Fractal Design Terra, and Fractal Design North XL Mesh. This port provides direct access for modern external drives and peripherals. Before purchasing, verify that your chosen motherboard includes an internal USB-C front-panel header so you can connect and utilize the port properly.
How does a sound-dampened PC case minimize noise?
Sound-dampened cases reduce noise using thick internal insulation mats that absorb fan and component vibrations. The be quiet! Silent Base 802 utilizes sound-insulation materials alongside swappable solid panels to quiet internal hardware. It also includes three pre-installed fans and an invertible motherboard tray, letting you balance component layout and acoustic dampening depending on whether you prioritize silence or airflow.
What is the main difference between full-tower and mid-tower PC cases?
Full-tower cases offer greater interior volume and component clearance than mid-tower enclosures. Models such as the Enthoo Pro, ASUS TUF Gaming, and Fractal Design North XL stand around 20 inches tall or higher, supporting extensive liquid cooling setups and oversized hardware. Mid-towers offer a more compact desktop footprint suited for standard ATX configurations while still housing multi-fan cooling layouts.