Best PC Cases with 280mm Radiator: 9 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right PC case with 280mm Radiator support depends on balancing chassis volume with hardware compatibility. We evaluated 9 models based on the specifications published on the listings. The Cooler Master NR200P MAX V2 Mini-ITX Case takes the top spot because it combines a built-in 280mm radiator and an 850W power supply within an 18.25-liter frame.
This guide helps you decide which enclosure fits your hardware by comparing motherboard form factors, exterior dimensions, and radiator placement options for your next system.
Our top pick: NZXT H5 Flow RGB Mid-Tower Case.
Quick picks
The best fit for you
- You need an ITX case with included power and cooling Cooler Master NR200P MAX V2 Mini-ITX Case It includes a built-in 280mm radiator and an 850W power supply inside an 18.25-liter Mini-ITX frame.
- You want a standard ATX chassis with front radiator support NZXT H5 Flow RGB Mid-Tower Case It supports ATX motherboards, front 280mm radiators, and graphics cards up to 400mm in length.
- You build with a Micro-ATX board and top radiator Thermaltake View 170 TG ARGB Micro-ATX Case It offers Micro-ATX motherboard support paired with dedicated top 280mm radiator clearance and three pre-installed ARGB fans.
- You want the smallest 280mm-capable Mini-ITX footprint SSUPD Meshroom S V2 SFF Mini-ITX Case It fits a 280mm radiator and PCIe 5.0 hardware into a compact 15-liter small-form-factor chassis.
Our 9 picks
NZXT H5 Flow RGB Mid-Tower Case
Best for: ATX builds with front 280mm radiators
- Radiator Support
- 280mm Radiator (what this guide is about)
- Case Type
- Compact ATX Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 2x F140 RGB Core, 1x 120mm
- Max GPU Length
- 400mm
- Use
- Gaming
The NZXT H5 Flow RGB is a compact ATX mid-tower case designed for high-airflow setups. You can install up to a 280mm liquid cooling radiator along the front panel or a 240mm unit up top. It includes two pre-installed 140mm ARGB front fans and an angled 120mm bottom fan for graphics card intake. It suits you if you want full ATX motherboard support alongside a front-mounted 280mm cooler.
Pros
- Supports up to a 280mm front radiator and a 240mm top radiator
- Includes two pre-installed F140 RGB Core fans and one dedicated 120mm GPU fan
- Accommodates graphics cards up to 400mm in length
- Perforated front and top panels for filtered ventilation
Cons
- Top radiator mount is limited to 240mm rather than 280mm
- Vertical GPU mounting kit is sold separately
Good fit if
- You plan to mount your 280mm radiator in the front intake position.
- You need up to 400mm of clearance for a large graphics card.
- You want pre-installed 140mm ARGB fans and ATX motherboard support.
Skip if
- You require a top-mounted 280mm radiator.
- You need mounting space for more than six total fans.
Verdict: NZXT H5 Flow RGB ATX Mid-Tower Case provides focused graphics cooling, 400mm card clearance, and dedicated front 280mm radiator support. It is a straightforward, airflow-oriented option for standard ATX builds.
Cooler Master NR200P V2 Mini-ITX Case
Best for: compact liquid-cooled Mini-ITX builds
- Radiator Support
- 280mm Radiator (what this guide is about)
- Motherboard Support
- Mini-ITX
- Side Panel
- Tempered Glass or Vented Steel
- Max GPU Length
- 357mm
- Case Volume
- 18.25L
- Dimensions
- 14.7 × 7.28 × 11.5 inches
This 18.25-liter Mini-ITX chassis supports top-mounted 240mm or 280mm radiators for high-efficiency liquid cooling. You get vertical graphics card mounting for GPUs up to 357mm in length using an included PCIe 4.0 riser cable. It exclusively accepts SFX power supplies and Mini-ITX motherboards. You can swap between tempered glass and vented steel side panels, while an integrated USB Type-C port and bottom 120mm fan manage connectivity and base airflow.
Pros
- Supports top-mounted 240mm and 280mm radiators
- Accommodates GPUs up to 357mm with included PCIe 4.0 riser cable
- Includes both tempered glass and vented steel side panels
- Tool-free access via quick-release pins and removable GPU back panel
Cons
- Strictly fits SFX power supplies with no standard ATX support
- Restricted exclusively to Mini-ITX motherboards
- Limited entirely to vertical GPU mounting
Good fit if
- You need an 18.25-liter enclosure that houses a 280mm radiator.
- You plan to mount a graphics card up to 357mm vertically.
- You want interchangeable tempered glass and ventilated steel side panels.
Skip if
- You plan to install a standard ATX power supply.
- You use a Micro-ATX or full ATX motherboard.
- You require horizontal graphics card orientation.
Verdict: Cooler Master NR200P V2 Mini-ITX Case delivers 280mm top radiator support and clearance for 357mm vertical GPUs inside an 18.25-liter footprint. It is a capable small-form-factor option if your components match SFX power and Mini-ITX motherboard requirements.
Thermaltake View 170 TG ARGB Micro-ATX Case
Best for: Micro-ATX builds needing top 280mm liquid cooling
- Radiator Support
- 280mm Radiator (what this guide is about)
- Motherboard Support
- Micro-ATX
- Side Panel
- Tempered Glass
- Included Fans
- 3x 120mm ARGB
- Max GPU Length
- 340mm
- Dimensions
- 14.9 × 8.35 × 17.2 inches
The Thermaltake View 170 TG ARGB is a Micro-ATX chassis built for liquid cooling. It fits radiators up to 280mm along the top panel while accommodating graphics cards up to 340mm in length. Three 120mm ARGB fans arrive pre-installed behind dual pillarless tempered glass panels. This layout suits you if you want compact Micro-ATX dimensions paired with overhead dual-fan radiator clearance and visible interior hardware.
Pros
- Supports up to 280mm radiators on the top panel
- Includes three 120mm ARGB fans
- Clearance for graphics cards up to 340mm long
- Pillarless front and side tempered glass panels
Cons
- Restricted to Micro-ATX and smaller motherboards
- Front I/O lacks a USB Type-C port
Good fit if
- You plan to mount a 280mm radiator directly to the top panel.
- You build with a Micro-ATX motherboard and a GPU up to 340mm long.
- You want three pre-installed ARGB fans out of the box.
Skip if
- You need compatibility with full-size ATX motherboards.
- You require a front-panel USB-C port for peripherals.
Verdict: Thermaltake View 170 TG Micro-ATX Case pairs top 280mm radiator clearance with three pre-installed ARGB fans and pillarless tempered glass.
Thermaltake TR100 18.9L Mini-ITX Case
Best for: compact Mini-ITX builds with full-size GPUs
- Radiator Support
- 280mm Radiator (what this guide is about)
- Motherboard Support
- mITX
- Case Type
- SFF
- Max GPU Length
- 360mm
- Case Volume
- 18.9 Liters
- Tower Size
- Small Form Factor
The Thermaltake TR100 SFF Mini-ITX Case is an 18.9-liter dual-chamber chassis built for compact setups requiring liquid cooling. It fits a 280mm radiator alongside full-length graphics cards up to 360mm long via an included PCIe 4.0 riser cable. If you need portable small-form-factor housing that supports Mini-ITX motherboards and SFX or SFX-L power supplies without sacrificing large GPU clearance, this chassis matches those component dimensions.
Pros
- Supports 280mm radiators in an 18.9-liter dual-chamber layout
- Accommodates graphics cards up to 360mm in length
- Includes PCIe 4.0 riser cable and integrated GPU brace
- Compatible with both SFX and SFX-L power supplies
Cons
- Limits CPU cooler height to 68mm
- Restricted to Mini-ITX motherboards
- Does not fit standard ATX power supplies
Good fit if
- You need an 18.9-liter chassis that supports a 280mm liquid cooling radiator.
- You plan to install a long graphics card up to 360mm using an included PCIe 4.0 riser.
- You use a Mini-ITX motherboard with an SFX or SFX-L power supply.
Skip if
- You require a CPU air cooler taller than 68mm.
- You plan to use a Micro-ATX or standard ATX motherboard.
- You build with a full-size ATX power supply.
Verdict: Thermaltake TR100 SFF Mini-ITX Case pairs 280mm radiator capability with 360mm GPU clearance in an 18.9-liter footprint. It delivers dedicated dual-chamber spacing for high-end Mini-ITX configurations using SFX power supplies.
SSUPD Meshroom S V2 SFF Mini-ITX Case
Best for: compact builds with 280mm liquid cooling
- Radiator Support
- 280mm Radiator (what this guide is about)
- Motherboard Support
- ITX, MATX, ATX
- Case Type
- Mini-ITX, SFF
- Side Panel
- Mesh
- Max GPU Length
- 353mm
- Case Volume
- 15L
The SSUPD Meshroom S V2 is a 15-liter small form factor case designed for compact liquid-cooled builds. It accommodates a 280mm radiator on the front mounting bracket alongside an included PCIe 5.0 riser cable. Full mesh panels on all sides provide ventilation for high-end hardware. This chassis fits you if you want a desk-friendly footprint capable of housing large components like ATX power supplies and multi-slot graphics cards.
Pros
- Supports 240mm or 280mm front-mounted radiators
- Includes a PCIe 5.0 riser cable
- Compatible with SFX, SFX-L, and ATX power supplies up to 170mm
- All-mesh SGCC steel panels for direct airflow
Cons
- Limits CPU air cooler height to 74mm
- Requires an extra-length riser cable for Micro-ATX and ATX motherboards
- Fitting 353mm GPUs requires optional elevation feet
Good fit if
- You want to mount a 280mm AIO in a 15-liter enclosure.
- You need a PCIe 5.0 riser cable included in the box.
- You want the option to use a standard ATX power supply.
Skip if
- You plan to use a CPU air cooler taller than 74mm.
- You want out-of-the-box support for Micro-ATX or ATX boards without buying extra cables.
Verdict: SSUPD Meshroom S V2 SFF Mini-ITX Case delivers 280mm radiator support and PCIe 5.0 connectivity in a compact 15-liter footprint. It is a solid choice if you need maximum component flexibility in a small space.
Rosewill Mini-Tower with 400W Power Supply
Best for: microATX builds needing an integrated power supply
- Radiator Support
- 280mm Radiator (what this guide is about)
- Motherboard Support
- microATX, mini-ITX
- Case Type
- Mini Tower
- Included Fans
- 1x 120mm PWM
- Use
- Gaming
- Connectivity
- USB 3.0
This compact mini-tower houses microATX and mini-ITX motherboards within a 15.2-inch tall steel and plastic chassis. It lists 280mm radiator support alongside a pre-installed 120mm rear PWM fan and four expansion slots. The chassis includes a non-modular 400W power supply and accommodates one 3.5-inch and two 2.5-inch drive bays. It suits you if you want a basic desktop setup without sourcing a separate low-wattage power unit.
Pros
- Includes a pre-installed 400W power supply
- Supports both microATX and mini-ITX motherboards
- Comes with one 120mm rear PWM fan
- Provides four expansion slots and USB 3.0 connectivity
Cons
- Included 400W power supply is non-modular
- Restricted to a single 3.5-inch drive bay
Good fit if
- You want an all-in-one chassis with an included 400W power supply.
- You plan to build with a microATX or mini-ITX board.
- You need space for up to two 2.5-inch drives and one 3.5-inch drive.
Skip if
- You need higher wattage than 400W or a modular cabling setup.
- You are using a full-size ATX motherboard.
Verdict: Rosewill Micro ATX Mini Tower with 400W PSU delivers an integrated power unit and 280mm radiator support in a compact footprint. It provides core microATX mounting, four expansion slots, and essential drive mounts for streamlined builds.
Cooler Master NR200P MAX V2 Mini-ITX Case
Best for: compact builds needing built-in 280mm cooling
- Radiator Support
- 280mm Radiator (what this guide is about)
- Motherboard Support
- Mini-ITX
- Case Type
- Small Form Factor
- Max GPU Length
- 357.6mm
- Case Volume
- 18.25L
- Dimensions
- 14.8 × 7.28 × 11.5 inches
This 18.25-liter small-form-factor chassis integrates a pre-installed top 280mm liquid cooler and an 850W SFX Gold power supply. It accommodates Mini-ITX motherboards and vertical graphics cards up to 357.6mm long using an included PCIe 4.0 riser cable. If you want a compact setup without measuring clearances between the radiator, power unit, and graphics card, this pre-configured enclosure gives you high cooling capacity in minimal desk space.
Pros
- Includes pre-installed top-mounted 280mm liquid cooling unit
- Bundled with an 850W Gold ATX 3.1 SFX power supply
- Supports long graphics cards up to 357.6mm in length
- Includes a PCIe 4.0 riser cable for vertical GPU mounting
Cons
- Supports only Mini-ITX motherboards
- Restricted to vertical graphics card orientation
- Radiator mounting is limited to the top position
Good fit if
- You want an all-in-one bundle with an integrated 280mm radiator and SFX power supply.
- You plan to house a high-end graphics card up to 357.6mm in an 18.25-liter footprint.
- You are assembling a dedicated Mini-ITX setup with vertical GPU mounting.
Skip if
- You plan to use a Micro-ATX or standard ATX motherboard.
- You prefer installing your graphics card horizontally into the motherboard PCIe slot.
Verdict: Cooler Master NR200P MAX V2 Mini-ITX Case delivers an all-in-one small-form-factor foundation with its built-in 280mm radiator and 850W power supply. It ensures high cooling performance and ample GPU clearance within a compact 18.25-liter frame.
NZXT H5 Flow ATX Mid-Tower Case
Best for: ATX builds with front 280mm liquid cooling
- Radiator Support
- 280mm Radiator (what this guide is about)
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 2 x 120mm
- Max GPU Length
- 365mm
- Motherboard Support
- ATX
The NZXT H5 Flow is an ATX mid-tower chassis built for airflow. For liquid cooling, you get support for a 280mm radiator in the front panel, along with 240mm top and 120mm rear mounts. It accommodates graphics cards up to 365mm in length and includes a dedicated angled 120mm bottom fan for GPU intake. This case suits you if you want standard ATX hardware support and dedicated front liquid-cooling capacity.
Pros
- Front radiator mount supports up to 280mm
- Generous 365mm maximum GPU clearance
- Dedicated angled 120mm fan draws air from below directly to the GPU
- Pre-routed cable channels with hooks, bridges, and straps
Cons
- Top radiator support is limited to 240mm
- Vertical GPU mounting hardware is sold separately
- Ships with only two pre-installed 120mm fans
Good fit if
- You plan to mount a 280mm radiator in the front intake position.
- You need clearance for graphics cards up to 365mm long.
- You want standard ATX motherboard compatibility.
Skip if
- You require 280mm radiator support along the top panel.
- You want included hardware for vertical GPU mounting.
Verdict: NZXT H5 Flow ATX Mid-Tower Case delivers front 280mm radiator support and 365mm GPU clearance in a clean chassis. It provides dedicated lower GPU intake and straightforward cable channels for ATX configurations.
Lian Li SUP 01 Stand-Up Case
Best for: vertical builds needing 280mm radiator support
- Radiator Support
- 280mm Radiator (what this guide is about)
- Included Fans
- 3x 120mm
- Case Volume
- 45L
- Lighting
- ARGB
- Dimensions
- 15.9 × 8.34 × 21 inches
- Weight
- 24.5 pounds
The Lian Li SUP 01 Stand-Up Case is an upright 45-liter chassis designed for a narrow desk footprint. It supports a 280mm radiator alongside its independent chamber cooling layout. The package includes three 120mm side exhaust fans, a rear 120mm fan bracket, and a 510mm PCIe 4.0 riser cable with ARGB lighting. This enclosure suits you if you want vertical component mounting without sacrificing liquid-cooling capacity.
Pros
- Supports 280mm radiator installations
- Includes three 120mm side exhaust fans
- Bundled 510mm PCIe 4.0 riser cable with ARGB lighting cover
- Features exterior 120mm rear fan mounting bracket
Cons
- Heavy empty chassis weight of 24.47 pounds
- Requires 21.02 inches of vertical clearance
- Rear fan mount is positioned on the exterior
Good fit if
- You want 280mm radiator support inside a stand-up chassis layout.
- You need an included PCIe 4.0 riser cable and three 120mm fans out of the box.
- You prefer a slim 8.34-inch footprint width on your desk.
Skip if
- You have tight overhead clearance under 21.02 inches.
- You need a lightweight chassis under 24 pounds.
Verdict: Lian Li SUP 01 Stand-Up Case delivers 280mm radiator compatibility and vertical chamber cooling inside a slim 45-liter chassis.
Specifications side by side
| Spec | NZXT H5 Flow RGB Mid-Tower Case | Cooler Master NR200P V2 Mini-ITX Case | Thermaltake View 170 TG ARGB Micro-ATX Case | Thermaltake TR100 18.9L Mini-ITX Case | SSUPD Meshroom S V2 SFF Mini-ITX Case | Rosewill Mini-Tower with 400W Power Supply | Cooler Master NR200P MAX V2 Mini-ITX Case | NZXT H5 Flow ATX Mid-Tower Case | Lian Li SUP 01 Stand-Up Case |
|---|---|---|---|---|---|---|---|---|---|
| Motherboard Support | not specified | Mini-ITX | Micro-ATX | mITX | ITX, MATX, ATX | microATX, mini-ITX | Mini-ITX | not specified | not specified |
| Case Type | Compact ATX Mid-Tower | not specified | not specified | SFF | Mini-ITX, SFF | Mini Tower | Small Form Factor | Mid-Tower | not specified |
| Side Panel | Tempered Glass | Tempered Glass or Vented Steel | Tempered Glass | not specified | Mesh | not specified | not specified | Tempered Glass | not specified |
| Included Fans | 2x F140 RGB Core, 1x 120mm | not specified | 3x 120mm ARGB | not specified | not specified | 1x 120mm PWM | not specified | 2 x 120mm | 3x 120mm |
| Radiator Support | 280mm | 280mm | 280mm | 280mm | 240mm, 280mm | 280mm | 280mm | 280mm | 360mm |
| Max GPU Length | 400mm | 357mm | 340mm | 360mm | 353mm | not specified | 357.6mm | 365mm | not specified |
| Case Volume | not specified | 18.25L | not specified | 18.9 Liters | 15L | not specified | 18.25L | not specified | 45L |
| Tower Size | Mid-Tower | not specified | not specified | Small Form Factor | Small Form Factor | Mini-Tower | not specified | Mid-Tower | not specified |
| Fan Size | not specified | not specified | not specified | not specified | 200mm | 120mm | not specified | 120mm | 120mm |
| Use | Gaming | not specified | not specified | not specified | Gaming | Gaming | not specified | Gaming | not specified |
| Lighting | RGB | not specified | ARGB | not specified | not specified | not specified | not specified | RGB | ARGB |
| Connectivity | not specified | not specified | not specified | not specified | Type-C | USB 3.0 | not specified | not specified | not specified |
| Compatible Device | Radiator | not specified | Radiator | Radiator | not specified | not specified | not specified | Radiator | not specified |
| Dimensions | 20.9 × 20 × 11.5 inches | 14.7 × 7.28 × 11.5 inches | 14.9 × 8.35 × 17.2 inches | not specified | 9.72 × 6.57 × 14.3 inches | 15.2 × 7.8 × 15.2 inches | 14.8 × 7.28 × 11.5 inches | 17.6 × 8.94 × 18.3 inches | 15.9 × 8.34 × 21 inches |
| Weight | 2.2 pounds | 10.9 pounds | 10.3 pounds | not specified | 6.83 pounds | 10 pounds | 17 pounds | 15.5 pounds | 24.5 pounds |
| Size | H5 Flow RGB (Mid-Tower) | Mini-ITX | ARGB | not specified | not specified | Compact | Small Form Factor Mini-ITX Case | H5 Flow | SUP01 Black |
| Color | White | Black | Black | Matcha Green | PCIE 5.0 200mm(Black) | Black | Black/Grey | Black | Black |
| Model | CC-H51FW-R1 | NR200PV2-KCNN-S00 | CA-1Z4-00M1WN-00 | CA-11A-00SENN-00 | Meshroom S PCI5 BK | FBM-X5-400 | NR200PV2-MCNN85-SL0 | CC-H51FB-01 | SUP01X.US |
When a 280mm Radiator Is Worth It
A 280mm radiator provides dual-fan liquid cooling capacity across various chassis sizes. In small-form-factor cases between 15 and 18.9 liters, this feature allows high cooling performance alongside graphics cards up to 360mm. In mid-tower and microATX frames, dedicated front or top 280mm mounts support clearance for cards up to 400mm. Choosing a case with 280mm radiator compatibility gives you room for liquid cooling loops without expanding outside standard mid-tower or compact mini-ITX boundaries.
Worth it if
- You want liquid cooling in a compact Mini-ITX chassis between 15 and 18.9 liters.
- You need front or top liquid cooling mounts alongside graphics cards up to 400mm.
Skip it if
- You use standard air cooling setups and do not need radiator brackets.
- You prefer simple air-cooled configurations using only pre-installed case fans.
How We Selected 280mm Cases
You find cases in this guide through published manufacturer specifications. A case qualifies when the product title or feature list explicitly confirms support for a 280mm radiator. We do not physically handle or test the hardware. All dimensions, motherboard form factors, and cooling limits come straight from published listing data. Each product family appears only once so you see distinct chassis options instead of duplicate sizes or colors.
The 9 picks display products in stock first. You can compare specs like Mini-ITX, Micro-ATX, and ATX motherboard support directly against your hardware needs. This lets you match a 280mm liquid cooler with the right internal volume and clearance.
How to Choose a 280mm PC Case
-
Check Radiator Mounting Locations
Radiator position affects your internal clearance and airflow setup. Some enclosures support 280mm liquid coolers at the top, while others mount them at the front. Top mounting exhausts warm air directly out of the case, leaving the front open for cool intake airflow. For instance, the Thermaltake View 170 TG ARGB provides dedicated top 280mm radiator clearance. Compare the listed radiator locations against your planned fan orientation before buying. Ensuring top clearance prevents the cooling hardware from interfering with tall motherboard components or memory sticks.
-
Evaluate Included Power Units
Check whether your selected chassis includes a pre-installed power supply. Integrated units reduce the number of individual parts you need to source and ensure exact sizing matches the chassis interior. The Rosewill Mini-Tower with 400W Power Supply includes a factory-installed 400W unit for simple, compact configurations. If your hardware requires higher wattage or modular cabling, choose a standalone case that lets you install an aftermarket power supply instead. Verifying power supply specifications early prevents compatibility mismatches with power-hungry graphics cards and motherboards.
-
Review Front Panel Ports
Examine the input ports located on the exterior of the chassis. Fast connectivity is crucial if you regularly connect external storage, phones, or modern peripherals to your setup. Cases offer varied port selections ranging from basic USB 3.0 ports to high-speed connections. The SSUPD Meshroom S V2 SFF Mini-ITX Case features integrated Type-C connectivity on its front I/O panel. Match the case ports to your motherboard headers to ensure every front connector functions properly, avoiding dead ports or the need for internal adapter cables.
-
Select Side Panel Construction
Side panel construction changes how your computer looks and behaves. Tempered glass panels display your internal components, custom liquid cooling loops, and internal lighting clearly. Cases like the Cooler Master NR200P V2 Mini-ITX Case feature a tempered glass side panel to keep your build visible from the outside. If you prioritize maximum exterior protection or stealth styling, solid panels offer a cleaner look. Check the product specifications for glass panels if visual monitoring and aesthetic presentation matter for your workspace.
-
Inspect Pre-Installed Case Lighting
Built-in illumination simplifies custom aesthetic setups without requiring separate lighting strips or aftermarket fan kits. Certain cases include built-in lighting features right out of the box, standardizing your illumination setup immediately. For example, the Lian Li SUP 01 Stand-Up Case comes with integrated ARGB lighting elements configured into its vertical frame. If you prefer a clean or minimalist workspace without vibrant lights, select a non-RGB enclosure. Check the chassis spec sheet to confirm whether lighting features addressable RGB or standard static colors.
Frequently asked questions
Can small form factor Mini-ITX cases fit a 280mm radiator?
Yes, several compact chassis accommodate a dual-fan 280mm cooler without requiring full-tower volume. For example, the SSUPD Meshroom S V2 packs 280mm radiator support into a 15-liter profile. The Cooler Master NR200P V2 and Thermaltake TR100 also house 280mm units within sub-19-liter enclosures while retaining clearance for long graphics cards.
Do any PC cases include both a 280mm radiator and a power supply?
Yes, certain integrated enclosures bundle these components to simplify your assembly process. The Cooler Master NR200P MAX V2 comes equipped with a built-in 280mm radiator and an 850W power supply inside an 18.25-liter Mini-ITX frame. This setup guarantees component compatibility out of the box, saving you from sourcing a separate SFX power unit and compatible liquid cooler.
What motherboard form factors work with 280mm radiator cases?
You can find 280mm radiator compatibility across Mini-ITX, Micro-ATX, and standard ATX motherboards. The NZXT H5 Flow supports full ATX boards alongside front radiator mounting. If you prefer mid-sized options, the Thermaltake View 170 TG accommodates Micro-ATX motherboards. For ultra-compact builds, chassis like the SSUPD Meshroom S V2 and Thermaltake TR100 are tailored specifically to Mini-ITX motherboards.
Does a front-mounted 280mm radiator restrict graphics card length?
It depends on the chassis dimensions, but mid-towers often provide plenty of clearance. In the NZXT H5 Flow RGB, you get 400mm of GPU clearance with dedicated front 280mm radiator support. The standard NZXT H5 Flow mid-tower provides 365mm of graphics card clearance. Always compare your GPU length against the published chassis maximums to avoid spatial conflicts.
Can you install a vertical graphics card in a 280mm radiator case?
Yes, multiple chassis support vertical GPU orientations alongside a 280mm radiator. The Cooler Master NR200P V2 supports vertical GPUs up to 357mm in length beneath its top 280mm radiator bracket. Additionally, the Lian Li SUP 01 Stand-Up Case uses a vertical chamber layout to deliver 280mm liquid cooling support within a slim 45-liter footprint.
Are there budget Micro-ATX cases that support a 280mm radiator?
Yes, you can select Micro-ATX enclosures engineered for dual-fan liquid cooling. The Thermaltake View 170 TG Micro-ATX case features top 280mm radiator clearance and includes three pre-installed ARGB fans with tempered glass panels. Another compact option is the Rosewill Mini-Tower, which fits Micro-ATX motherboards, provides four expansion slots, and includes an integrated 400W power supply.
What fan sizes are typically included with 280mm radiator PC cases?
Pre-installed fans vary by chassis design, frequently incorporating 120mm or ARGB fans rather than 140mm units. For instance, the Thermaltake View 170 TG includes three pre-installed ARGB fans, while the Rosewill Mini-Tower and NZXT H5 Flow specify 120mm fan configurations. Because 280mm radiators use 140mm fans, you will typically use the cooling fans bundled directly with your liquid cooler.