The Best Phanteks PC Cases in 2026: 8 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing a Phanteks PC case depends on your layout requirements. Phanteks offers mid-tower and full-tower enclosures featuring closed panels, dual tempered glass showcase frames, and integrated RGB lighting options. The Phanteks XT Pro Silent Mid-Tower Case leads the lineup for quiet gaming builds with rear-connector motherboards, providing three-panel dampening foam and three included M25-120 fans.
This guide compares 8 models based on the specifications published on their listings to help you select the right enclosure.
Our top pick: Phanteks Enthoo Pro Non-Window Full Tower.
Quick picks
Our 8 picks
Phanteks Enthoo Pro Non-Window Full Tower
Best for: windowless full-tower and custom liquid-cooling builds
- Case Type
- Full Tower
- Included Fans
- 1x 200mm, 1x 140mm
- Dimensions
- 22 × 10 × 21 inches
- Weight
- 2.2 pounds
The Phanteks Enthoo Pro Non-Window Full Tower is a solid-panel full-tower chassis designed for large builds without visible internal lighting. You get a pre-installed 200mm front fan, a 140mm rear fan, and an integrated PWM hub to manage fan speeds. It supports up to four radiator locations for 120mm and 140mm sizes. This chassis suits you if you need extensive water cooling support and hidden drive bays without a glass panel.
Pros
- Includes one 200mm front fan and one 140mm rear fan
- Built-in PWM fan hub controls multiple fans through one header
- Front panel includes USB-C Gen 2 and two USB 3.0 ports
- Four installation areas for single to triple 120mm and 140mm radiators
Cons
- No windowed side panel for viewing internal components
- Includes only one Drop-n-Lock SSD bracket
Good fit if
- You want a full-tower enclosure without a transparent side window.
- You plan to mount multi-radiator liquid cooling setups with push-pull fans.
- You want built-in PWM hub control for 3-pin and 4-pin fans.
Skip if
- You want a tempered glass panel to display internal hardware.
- You require more than one SSD mounting bracket out of the box.
Verdict: Phanteks Enthoo Pro Non-Window Full Tower provides extensive liquid cooling support and enclosed stealth panels for clean, non-windowed builds. Its pre-installed 200mm and 140mm fans connect directly to an integrated PWM hub for centralized cooling control.
Phanteks Enthoo Pro Full Tower Tempered Glass
Best for: ATX builds needing optical drives and custom cooling
- Case Type
- Full Tower
- Side Panel
- Tempered Glass
- Motherboard Support
- ATX
- Lighting
- RGB
- Dimensions
- 21.7 × 9.25 × 21.1 inches
- Weight
- 24.3 pounds
View on Amazon: Phanteks Enthoo Pro Full Tower Tempered Glass
The Phanteks Enthoo Pro Full Tower Tempered Glass is a full-tower case measuring 21.1 inches tall and 21.7 inches long. It features an integrated optical drive bay, dedicated reservoir mounts, and pump slots for custom cooling loops. The front panel supplies USB-C Gen 2 alongside dual USB 3.0 ports and built-in RGB controls. This chassis suits you if you need traditional drive support and water-cooling mounting points inside an ATX layout.
Pros
- Front I/O includes USB-C Gen 2, two USB 3.0 ports, and RGB switch
- Built-in optical drive bay, pump slots, and reservoir mounts
- Full tempered glass side panel with integrated RGB lighting
- Phanteks Velcro cable ties and hidden PSU and HDD compartments
Cons
- Heavy chassis weighing over 24 pounds unpopulated
- Motherboard support limited to ATX without larger form factor listings
- Large footprint measuring over 21 inches in length and height
Good fit if
- You need an optical drive bay along with water-cooling reservoir mounts.
- You want a full-tower chassis with USB-C Gen 2 connectivity on the front panel.
- You plan to build a standard ATX system inside a chassis with integrated RGB lighting.
Skip if
- You need a lightweight or compact case for a small desk setup.
- You want support for motherboards larger than standard ATX.
Verdict: Phanteks Enthoo Pro Full Tower Tempered Glass pairs classic optical drive support and liquid cooling mounting hardware with modern USB-C Gen 2 connectivity. It is a capable full-tower platform for builders prioritizing legacy bay access alongside integrated RGB lighting.
Phanteks XT Pro Silent Mid-Tower Case
Best for: Quiet gaming builds with rear-connector motherboards
- Case Type
- Mid-Tower
- Included Fans
- 3x M25-120
- Radiator Support
- 360mm
- Use
- Gaming
- Dimensions
- 17.7 × 9.05 × 19.7 inches
- Weight
- 16.8 pounds
The Phanteks XT Pro Silent is a black mid-tower chassis focused on noise reduction. It includes sound dampening foam on the front, left, and right panels, alongside three pre-installed M25-120 black fans. You get clearance for a top 360 radiator and support for rear-connector motherboards. This chassis suits you if you prioritize quiet gaming and clean cable routing without visible internal components.
Pros
- Includes three M25-120 black fans
- Sound dampening foam on front, left, and right panels
- Supports rear-side connector motherboards
- Dedicated top 360 radiator support
Cons
- Closed side panels omit internal hardware visibility
- Fan mounts capped at 120mm sizes across seven locations
Good fit if
- You want sound-dampening foam across the front and side panels.
- You build with a rear-side connector motherboard.
- You plan to mount a 360 radiator at the top.
Skip if
- You want a tempered glass window to show your build.
- You need support for fan sizes larger than 120mm.
Verdict: Phanteks XT Pro Silent Mid-Tower Case delivers low noise levels with its three-panel dampening foam and included trio of M25-120 fans. It offers an ideal mid-tower base if you build with rear-connector motherboards and standard 360 top radiators.
Phanteks XT View Matrix Mid-Tower Case
Best for: showcase builds using rear-connector ATX motherboards
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3x M25-120mm D-RGB
- Radiator Support
- 360mm
- Use
- Gaming
This Phanteks mid-tower gaming case features dual tempered-glass front and side panels and an integrated 600-LED matrix display for stats and animations. It includes three M25-120mm D-RGB fans with mounting for up to nine 120mm fans total. The chassis supports rear-connector ATX motherboards and houses a top 360mm radiator. It suits you if you want a dual-glass showcase chassis with built-in display elements and clean cabling.
Pros
- Integrated 600-LED fabric matrix display shows system stats and animations
- Supports rear-connector ATX motherboards for clean interior wiring
- Includes three pre-installed M25-120mm D-RGB cooling fans
- Dual tempered-glass front and side panels for full component visibility
Cons
- Specifications only state support for 120mm fan sizes across all positions
- Heavy empty chassis weight at 21 pounds
Good fit if
- You want an integrated LED matrix screen to display system stats and animations.
- You plan to build with a rear-connector ATX motherboard to conceal cabling.
- You want a dual tempered-glass view with three pre-installed D-RGB fans.
Skip if
- You need a lightweight PC enclosure weighing under 21 pounds unbuilt.
- You plan to mount 140mm cooling fans in your chassis.
Verdict: Phanteks XT View Matrix Mid-Tower Case combines dual-glass showcase panels with a unique 600-LED matrix display and rear-connector motherboard support. It provides robust 360mm liquid cooling compatibility and three included D-RGB fans for clean, modern builds.
Phanteks Enthoo Pro 2 Server Full Tower
Best for: SSI-EEB server builds and dense storage
- Motherboard Support
- SSI-EEB
- Case Type
- Full Tower
- Side Panel
- Closed Panel
- Radiator Support
- 480mm, 360mm
- Use
- Server
- Dimensions
- 22.1 × 9.45 × 22.8 inches
This full-tower chassis accommodates enterprise hardware with support for SSI-EEB motherboards and 11 PCI expansion slots. You get mounting locations for up to 15 fans, including three directly above the CPU and PCI area, alongside space for 480 mm and 360 mm radiators. With internal room for up to 10 HDDs or 11 SSDs, it suits you if you need a high-capacity storage server or multi-card workstation.
Pros
- Supports large SSI-EEB server motherboards
- Accommodates up to 15 cooling fans
- Provides 11 PCI expansion slots
- Holds up to 10 HDDs or 11 SSDs
Cons
- Heavy chassis at over 29 pounds empty
- Closed side panel offers no internal component visibility
Good fit if
- You need support for an SSI-EEB motherboard and up to 11 PCI cards.
- You plan to install up to 10 HDDs or 11 SSDs for dense storage.
- You require extensive airflow setups with up to 15 cooling fans.
Skip if
- You want a tempered glass panel to display internal components.
- You need a lightweight chassis that is easy to move.
Verdict: Phanteks Enthoo Pro 2 Server Full Tower provides extensive hardware capacity with 11 PCI slots, room for 15 fans, and SSI-EEB motherboard compatibility. It delivers maximum scalability for dense storage arrays and multi-card workstation builds.
Phanteks Eclipse Mid-Tower ATX Case
Best for: standard ATX mid-tower builds
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Dimensions
- 19.5 × 9.05 × 20.6 inches
- Weight
- 19 pounds
The Phanteks Eclipse Mid-Tower ATX Case is a standard mid-tower chassis designed for ATX motherboards. It measures 20.55 inches tall, 19.48 inches long, and 9.05 inches wide, with a total weight of 19 pounds. The enclosure features a tempered glass side panel to show your internal components. It suits you if you plan an ATX build and want a mid-tower form factor available in black or white.
Pros
- Tempered glass side panel
- Standard ATX motherboard support
- Available in black and white finishes
- Mid-tower footprint measuring 20.55 by 19.48 by 9.05 inches
Cons
- Motherboard support limited to ATX in published specs
- Weighs 19 pounds before component installation
- No included fans listed in specifications
Good fit if
- You need a mid-tower chassis for an ATX motherboard.
- You want a tempered glass side panel to display your build.
- You prefer a case available in black or white color options.
Skip if
- You plan to install a motherboard form factor other than ATX.
- You require an empty chassis that weighs less than 19 pounds.
Verdict: Phanteks Eclipse Mid-Tower ATX Case delivers a dedicated ATX layout with a tempered glass side panel and a 19-pound steel enclosure. It provides a straightforward mid-tower base for builds focused on standard ATX parts.
Phanteks XT View Matrix Mid-Tower Case
Best for: showcase builds wanting an integrated matrix display
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3x 120mm D-RGB
- Radiator Support
- 360mm
- Use
- Gaming
This mid-tower ATX chassis gives you a dual tempered-glass showcase layout paired with a built-in 600-LED front matrix display for system stats and animations. It includes three pre-installed M25-120mm D-RGB fans, accommodates up to nine 120mm fan mounts, and supports a top 360mm radiator. If you want rear-connector ATX motherboard compatibility and full-size graphics card clearance without cable clutter, this case fits your build needs.
Pros
- Built-in 600-LED matrix display for animations and system stats
- Three M25-120mm D-RGB fans included out of the box
- Compatible with next-gen rear-connector ATX motherboards
- Supports top-mounted 360mm radiators and up to nine 120mm fans
Cons
- No perforated front mesh intake due to dual glass panels
- Motherboard compatibility capped at standard ATX size
Good fit if
- You want a case with rear-connector ATX motherboard support.
- You want an integrated 600-LED screen to display system stats and animations.
- You plan to run a 360mm top radiator alongside dual tempered-glass panels.
Skip if
- You need support for larger E-ATX or server-grade motherboards.
- You prefer a direct mesh front panel instead of tempered glass.
Verdict: Phanteks XT View Matrix Mid-Tower Case combines dual tempered-glass panels with an integrated 600-LED matrix display and rear-connector motherboard support. It provides versatile cooling potential with three included D-RGB fans and room for a top 360mm radiator.
Phanteks NV9 MKII Full-Tower Showcase Case
Best for: large 140mm radiator showcase builds
- Case Type
- Full-Tower
- Side Panel
- Tempered Glass
- Radiator Support
- 420mm
- Fan Size
- 140mm
- Lighting
- RGB
- Dimensions
- 22.6 × 11 × 24.2 inches
The Phanteks NV9 MKII is a full-tower showcase chassis built around 140mm fan configurations. It supports triple 420mm and 280mm radiators simultaneously and accommodates rear-connect motherboards like Project Zero and BTF. Near-seamless tempered glass panels display your hardware, while the 65mm bottom clearance delivers direct intake to your graphics card. This case suits you if you plan an expansive liquid-cooled build with large radiators and zero visible internal cables.
Pros
- Supports triple 420mm and 280mm radiators simultaneously
- Compatible with BTF and Project Zero rear-connect motherboards
- Integrated dual-channel D-RGB lighting around the motherboard tray
- Reversible bottom fan bracket with 65mm intake clearance
Cons
- Heavy 51-pound bare chassis weight
- Large footprint measuring over 24 inches high and 22 inches deep
Good fit if
- You want to mount multiple 420mm radiators in one system.
- You plan to build with a rear-connect motherboard for hidden cabling.
- You prefer a dual-glass showcase layout with integrated D-RGB lighting.
Skip if
- You need a compact or lightweight chassis that is easy to move.
- You prefer a standard mid-tower chassis over a large showcase tower.
Verdict: Phanteks NV9 MKII Full-Tower Showcase Case provides massive radiator clearance and rear-connect motherboard compatibility for large-scale showcase builds. Its 51-pound frame accommodates complex 140mm-fan liquid cooling loops with dedicated bottom GPU intake.
Specifications side by side
| Spec | Phanteks Enthoo Pro Non-Window Full Tower | Phanteks Enthoo Pro Full Tower Tempered Glass | Phanteks XT Pro Silent Mid-Tower Case | Phanteks XT View Matrix Mid-Tower Case | Phanteks Enthoo Pro 2 Server Full Tower | Phanteks Eclipse Mid-Tower ATX Case | Phanteks XT View Matrix Mid-Tower Case | Phanteks NV9 MKII Full-Tower Showcase Case |
|---|---|---|---|---|---|---|---|---|
| Motherboard Support | not specified | not specified | not specified | ATX | SSI-EEB | ATX | ATX | not specified |
| Case Type | Full Tower | Full Tower | Mid-Tower | Mid-Tower | Full Tower | Mid-Tower | Mid-Tower | Full-Tower |
| Side Panel | not specified | Tempered Glass | not specified | Tempered Glass | Closed Panel | Tempered Glass | Tempered Glass | Tempered Glass |
| Included Fans | 1x 200mm, 1x 140mm | not specified | 3x M25-120 | 3x M25-120mm D-RGB | not specified | not specified | 3x 120mm D-RGB | not specified |
| Radiator Support | not specified | not specified | 360mm | 360mm | 480mm, 360mm | not specified | 360mm | 420mm |
| Tower Size | Full-Tower | not specified | Mid-Tower | Mid-Tower | not specified | Mid-Tower | Mid-Tower | Full-Tower |
| Fan Size | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 140mm |
| Use | not specified | not specified | Gaming | Gaming | Server | not specified | Gaming | not specified |
| Lighting | not specified | RGB | not specified | RGB | not specified | not specified | RGB | RGB |
| Dimensions | 22 × 10 × 21 inches | 21.7 × 9.25 × 21.1 inches | 17.7 × 9.05 × 19.7 inches | 17.3 × 9.06 × 19.7 inches | 22.1 × 9.45 × 22.8 inches | 19.5 × 9.05 × 20.6 inches | 17.3 × 9.06 × 19.7 inches | 22.6 × 11 × 24.2 inches |
| Weight | 2.2 pounds | 24.3 pounds | 16.8 pounds | 21 pounds | 29.1 pounds | 19 pounds | 17.5 pounds | 51 pounds |
| Color | BLACK NO WINDOW | Black | Black | Charcoal Black | Closed Panel | Black | Grey White | White |
| Model | PH-ES614PC_BK | PH-ES614PTG_BK | PH-XT523PSC_BK01 | PH-XT523VM1_DBK01_MS | PH-ES620PC_BK02 | G400A | PH-XT523VM1_DWT01 | PH-NV923TG_DMW02 |
| Size | not specified | Full Tower" | Mid-Tower" | not specified | not specified | not specified | not specified | not specified |
The Phanteks PC Case Lineup
Mid-tower models focus on standard gaming builds that utilize ATX motherboards and top 360mm radiators. The Phanteks XT View Matrix Mid-Tower Case suits users wanting dual tempered glass panels and rear-connector motherboard support. If you require a straightforward footprint for standard hardware, the Phanteks Eclipse Mid-Tower ATX Case provides a 19-pound steel enclosure with a tempered glass side panel.
Full-tower frames handle larger components and expanded thermal setups. The Phanteks NV9 MKII Full-Tower Showcase Case accommodates 140mm fan configurations and liquid cooling loops within a 51-pound chassis. For workstation needs, the Phanteks Enthoo Pro 2 Server Full Tower supports SSI-EEB server boards, 11 PCI slots, and room for 15 fans for dense storage arrays.
Who Phanteks Cases Fit Best
The Phanteks catalog spans mid-tower frames up to heavy 51-pound full-tower enclosures. You choose between solid foam-dampened panels, single tempered glass, and dual-glass showcase designs. Visual options range from unlit enclosures to cases with D-RGB fans and integrated 600-LED matrix displays. Motherboard support accommodates standard ATX, rear-connector designs, and 11-slot SSI-EEB server boards.
Clear gaps exist across the range. You get no small-form-factor, Mini-ITX, or Micro-ATX cases. The list also omits open-frame test benches, cube layouts, and pre-installed power supplies.
How to Choose a Phanteks Case
-
Check Motherboard Form Factor
You need to match the case layout to your motherboard format. Most standard consumer motherboards use the ATX form factor, which fits mid-tower frames without issue. If you plan to build an enterprise system or a multi-GPU rendering workstation, standard mid-tower trays lack the mounting holes you require. The Phanteks Enthoo Pro 2 Server Full Tower accommodates wide SSI-EEB server boards and offers 11 PCI slots. Review your board size and expansion card requirements before choosing an enclosure footprint.
-
Verify Dimensions and Chassis Weight
Chassis dimensions dictate your desk placement options. Phanteks mid-tower frames generally measure around 17 to 19 inches long and weigh under 21 pounds. Full-tower options demand significantly more desk depth and structural support. For instance, the Phanteks NV9 MKII Full-Tower Showcase Case stands 24.21 inches tall, reaches 22.63 inches in length, and weighs 51 pounds empty. Measure your available desk surface and check the clearance beneath shelves before purchasing a large full-tower chassis to ensure it fits comfortably in your room.
-
Evaluate Included Cooling Hardware
You should review the stock fan setup to understand your out-of-the-box airflow. Some enclosures include standard 120mm fans, while larger cases provide mixed fan diameters and integrated control hardware. The Phanteks Enthoo Pro Non-Window Full Tower includes a 200mm front intake fan alongside a 140mm rear exhaust fan wired directly to an integrated PWM hub. This centralized hub lets you control multiple fans through a single motherboard header. Check whether a case includes fans and fan management hubs to avoid purchasing separate fan splitters.
-
Select Acoustic Panels or Glass
Side panel construction determines whether your case prioritizes component visibility or acoustic containment. Tempered glass panels allow full internal views and showcase RGB components, but they do not trap internal fan sound. If you prefer low operating volume in quiet workspaces, solid metal panels with internal dampening materials are preferable. The Phanteks XT Pro Silent Mid-Tower Case incorporates three-panel dampening foam and solid panels to muffle noise from spinning fans and mechanical drives. Decide whether you want to display internal hardware or suppress operational noise.
-
Look for Modern Front Connectivity
You should inspect the external ports and drive bays to match your peripheral devices. Standard gaming frames now omit external drive bays entirely in favor of unrestricted internal fan mounts. However, legacy storage and high-speed data transfer might require specific hardware accommodations. The Phanteks Enthoo Pro Full Tower Tempered Glass features front-accessible optical drive bay support alongside a modern USB-C Gen 2 port. If you rely on external optical discs or high-bandwidth USB-C storage drives, verify that the front I/O panel includes those exact ports.
-
Account for Rear-Connector Motherboards
Recent motherboard designs route 24-pin ATX, EPS, and fan headers entirely behind the circuit board. These boards keep cables out of the main compartment, but they require a chassis with dedicated cutouts behind the motherboard tray. Cases without these specific openings cannot accept reverse-connector boards. The Phanteks XT View Matrix Mid-Tower Case includes cutouts designed explicitly for rear-connector ATX motherboards, along with space for standard cable management. Confirm your motherboard model before purchasing so you know if your chassis needs reverse-connector cutouts.
Frequently asked questions
Which Phanteks case is best for custom liquid cooling?
The Phanteks Enthoo Pro Non-Window Full Tower is the top choice for extensive liquid cooling support. Its pre-installed 200mm and 140mm fans connect directly to an integrated PWM hub for centralized control. The enclosed stealth panels provide a clean look for non-windowed builds that prioritize thermal performance and cable management.
Does Phanteks make a quiet PC case?
Yes, the Phanteks XT Pro Silent Mid-Tower Case is designed for low noise levels. It features three-panel dampening foam and includes a trio of M25-120 fans to minimize acoustic output. This mid-tower base is ideal for quiet gaming builds, especially those using rear-connector motherboards and standard 360mm top radiators.
What is the best Phanteks case for servers?
The Phanteks Enthoo Pro 2 Server Full Tower offers maximum scalability for dense storage arrays. It supports SSI-EEB motherboards and provides 11 PCI slots. With room for up to 15 fans, this full-tower enclosure is built for multi-card workstation builds and enterprise systems requiring extensive hardware capacity.
Are there Phanteks cases with tempered glass?
Several models feature tempered glass panels. The Phanteks XT View Matrix Mid-Tower Case includes dual tempered-glass showcase panels and an integrated 600-LED matrix display. The Phanteks Eclipse Mid-Tower ATX Case also offers a single tempered glass side panel. These designs allow you to showcase internal components and RGB lighting clearly.
Which Phanteks case supports rear-connector motherboards?
The Phanteks XT Pro Silent Mid-Tower Case and the Phanteks XT View Matrix Mid-Tower Case both support rear-connector motherboards. The XT View Matrix specifically highlights this compatibility alongside its dual-glass showcase design. These cases ensure proper fit and airflow for modern motherboards with rear-mounted I/O panels.
What is the largest Phanteks case available?
The Phanteks NV9 MKII Full-Tower Showcase Case is the largest option, weighing 51 pounds. It provides massive radiator clearance for complex 140mm-fan liquid cooling loops. The frame also includes a dedicated bottom GPU intake and supports large-scale showcase builds, making it suitable for enthusiasts needing maximum internal space.
Does the Phanteks Enthoo Pro Full Tower have USB-C?
Yes, the Phanteks Enthoo Pro Full Tower Tempered Glass includes USB-C Gen 2 connectivity. It pairs this modern feature with classic optical drive support and liquid cooling mounting hardware. This full-tower platform is capable for builders who want legacy bay access alongside integrated RGB lighting and contemporary port options.