Best PC Cases with 240mm Radiator: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the best PC cases with 240mm Radiator requires matching your motherboard form factor to the chassis layout. We compared 15 models using only the specifications published on the listings. The Cooler Master Q300L Modular Micro-ATX Case leads because its 9.06-inch width and 15.4-inch length provide ample room for compact 240mm radiator builds. Each pick highlights specific dimensional constraints, such as GPU clearance and power supply compatibility. This guide helps you decide which chassis fits your components without guesswork.
Quick picks
The best fit for you
- You want the best overall compact 240mm radiator build Cooler Master Q300L Modular Micro-ATX Case The Cooler Master Q300L supports 240mm radiators in a Micro-ATX chassis with flexible I/O.
- You need a portable Micro-ATX case with a handle Jonsbo Z20 Mini-Tower with Handle The Jonsbo Z20 fits a 240mm radiator inside a 20-liter steel chassis with a handle.
- You want the most compact Mini-ITX 240mm radiator case Lian Li A4-H2OX5 Mini-ITX Case The Lian Li A4-H2OX5 offers a 11-liter footprint with dedicated 240mm radiator support.
- You build with back-connect motherboards needing 240mm cooling Jonsbo D32 Pro Mesh Micro-ATX Case The Jonsbo D32 Pro Mesh supports 240mm radiators and dual-mode mounting for back-connect boards.
Our 15 picks
Cooler Master Q300L Modular Micro-ATX Case
Best for: compact 240mm radiator builds
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX, Mini-ITX
- Side Panel
- Transparent
- Max GPU Length
- 360mm
- Compatible Device
- Graphics Card
- Dimensions
- 15.4 × 9.06 × 15 inches
View on Amazon: Cooler Master Q300L Modular Micro-ATX Case Affiliate link
The Cooler Master Q300L V1 is a Micro-ATX case designed for high airflow builds. It supports 240mm radiators and graphics cards up to 360mm long. The modular I/O panel lets you place ports on the front, top, or bottom. A transparent side panel showcases your components. This compact chassis suits users who need flexible cooling options without a large footprint.
Pros
- Supports 240mm liquid coolers
- Accommodates GPUs up to 360mm
- Modular I/O panel for flexible placement
- Transparent side panel for visibility
- Open thermal design with perforated sides
Cons
- Supports only Micro-ATX and Mini-ITX motherboards
- Max CPU cooler height is 159mm
Good fit if
- You need a 240mm radiator in a small case
- You want to mount I/O ports on the top or bottom
- You build with Micro-ATX or Mini-ITX boards
Skip if
- You require full ATX motherboard support
- You need a 360mm radiator option
- You prefer a mesh panel over glass
Verdict: Cooler Master Q300L V1 Micro-ATX Case offers flexible I/O and strong GPU clearance for compact builds. It fits users who prioritize airflow and radiator support in a small chassis.
Jonsbo Curved Glass Micro ATX Mini Tower
Best for: Micro-ATX builds needing compact 240mm liquid cooling
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX, Mini-ITX
- Case Type
- Mini Tower
- Side Panel
- Tempered Glass
- Max GPU Length
- 280mm
- Dimensions
- 12.2 × 11.8 × 13.6 inches
View on Amazon: Jonsbo Curved Glass Micro ATX Mini Tower Affiliate link
This mini tower case features a curved tempered glass exterior with a dual-chamber layout for Micro-ATX and Mini-ITX motherboards. For liquid cooling, the top panel mounts a 240mm radiator alongside two bottom 120mm fan mounts for vertical airflow. You get clearance for 280mm graphics cards, 165mm CPU coolers, and standard ATX power supplies up to 220mm. It suits your build if you want compact 240mm cooling with dual-chamber cable management.
Pros
- Top plate supports a 240mm integrated liquid cooling radiator
- Front I/O features a 10Gbps USB 3.2 Gen 2 Type-C port
- Supports standard ATX power supplies up to 220mm long
- Accommodates CPU air coolers up to 165mm in height
Cons
- Maximum graphics card length is restricted to 280mm
- Expansion slot count is limited to 4
- Fan mounts are restricted strictly to the top and bottom plates
Good fit if
- You want a top-mounted 240mm radiator inside a Micro-ATX or Mini-ITX setup.
- You need front-panel USB 3.2 Gen 2 Type-C connectivity.
- You use a graphics card measuring 280mm or less in length.
Skip if
- You build with a full-size ATX motherboard.
- You own a graphics card longer than 280mm.
- You require front or side radiator mounting locations.
Verdict: Jonsbo Curved Glass Micro-ATX Mini Tower pairs dedicated top 240mm radiator mounting with a compact dual-chamber layout. It accommodates full-size ATX power supplies and tall CPU coolers, provided your graphics card stays within 280mm.
Jonsbo Z20 Mini-Tower with Handle
Best for: portable Micro-ATX builds with 240mm liquid cooling
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX
- Case Type
- Mini Tower
- Max GPU Length
- 363mm
- Case Volume
- about 20L
- Dimensions
- 13 × 13 × 7.5 inches
View on Amazon: Jonsbo Z20 Mini-Tower with Handle Affiliate link
The Jonsbo Z20 Micro-ATX Case with Handle is a 20-liter mini tower built with 2mm bent steel panels. For liquid cooling, its top mount accommodates a 240mm radiator up to 60mm in total thickness. The chassis accepts ATX or SFX power supplies and fits graphics cards up to 363mm. This layout suits you if you need compact desk footprint and portability without sacrificing standard-sized cooling hardware.
Pros
- Supports top 240mm radiator setups up to 60mm total thickness
- Clearance for graphics cards up to 363mm in length
- 2mm integrated bent steel construction with magnetic dust filtration
- Detachable carrying handle on a compact 20-liter chassis
Cons
- Radiator mounting restricted exclusively to the top panel
- Storage capped at one 3.5-inch drive maximum
- Front panel includes only a single USB Type-A port
Good fit if
- You want a 20-liter portable case with a carrying handle.
- You plan to run a 240mm top-mounted liquid cooler.
- You use a Micro-ATX motherboard with a long graphics card.
Skip if
- You require front or side radiator placement.
- You need space for multiple 3.5-inch mechanical hard drives.
- You prefer multiple front-panel USB Type-A connections.
Verdict: Jonsbo Z20 Micro-ATX Case with Handle delivers dense hardware support with clearance for a 60mm-thick 240mm radiator inside a 20-liter steel chassis. It provides portable Micro-ATX capability without restricting full-size graphics cards or ATX power supplies.
darkFlash Micro-ATX Panoramic Glass Case
Best for: Micro-ATX builds with visible RGB lighting
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro ATX
- Side Panel
- Tempered Glass
- Included Fans
- 3x PWM ARGB
- Use
- Gaming
- Connectivity
- Type-C
View on Amazon: darkFlash Micro-ATX Panoramic Glass Case Affiliate link
The darkFlash DB330M is a white Micro-ATX case featuring a 270-degree panoramic tempered glass side panel. It supports 240mm radiators and includes three pre-installed PWM ARGB fans. The design creates vertical airflow with fans positioned above the power supply. You get a high-speed IO panel with USB 3.0 and Type-C ports. This compact build suits gamers who want clear visibility of their hardware and RGB lighting.
Pros
- Includes three pre-installed PWM ARGB fans for immediate cooling and lighting
- 270-degree panoramic tempered glass panel provides an unobstructed view of internals
- High-speed IO panel features USB 3.0 and Type-C connectivity
- Vertical airflow design directs heat away from the graphics card
Cons
- Supports only Micro-ATX motherboards, limiting compatibility with larger ATX boards
- RGB hub controller is not included, requiring separate purchase for lighting control
- Dimensions of 13.1 x 15.8 x 8.58 inches may not fit all desks
Good fit if
- You want a Micro-ATX build with visible RGB lighting
- You need USB Type-C connectivity on the front panel
- You prefer a white case with full tempered glass sides
Skip if
- You require support for full-size ATX motherboards
- You want included RGB hub controller for fan lighting
- You need a case for large E-ATX graphics cards
Verdict: The darkFlash DB330M White Micro-ATX Case offers a clear view of your components with its glass panel and pre-installed fans. It fits builders who prioritize Micro-ATX compatibility and modern connectivity options.
Jonsbo D32 Back-Connect Micro-ATX Case
Best for: compact builds using back-connect motherboards
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX, Mini-ITX
- Case Type
- Micro-ATX
- Side Panel
- Tempered Glass
- Max GPU Length
- 365mm
- Case Volume
- 24L
View on Amazon: Jonsbo D32 Back-Connect Micro-ATX Case Affiliate link
This compact 24-liter micro-ATX chassis fits a 240mm liquid cooler alongside graphics cards up to 365mm in length. An adjustable dual-mode tray supports standard and back-connect motherboards, while the tempered glass side panel reveals your interior hardware. With clearances for 163mm air coolers and 200mm power supplies, it suits builders who want a space-saving desktop enclosure that accommodates high-end components and clean, hidden cable layouts.
Pros
- Supports 240mm radiators and air coolers up to 163mm tall
- Accommodates graphics cards up to 365mm long
- Dual A/B mode supports standard and back-connect motherboards
- Fits power supplies up to 200mm in length
Cons
- Incompatible with 16A power supply plugs
- 3.5-inch drive capacity shares mounting space with 2.5-inch drives
- Does not support full-size ATX motherboards
Good fit if
- You plan to run a 240mm AIO cooler in a compact 24-liter chassis.
- You are building with a back-connect Micro-ATX motherboard.
- You need room for a long graphics card up to 365mm.
Skip if
- You need support for a standard ATX motherboard.
- You use a power supply requiring a 16A wall plug.
- You require separate dedicated bays for more than two 3.5-inch drives.
Verdict: Jonsbo D32 Micro-ATX Case delivers strong cooling flexibility with 240mm radiator support and dual-mode motherboard mounting in a compact 24-liter footprint. It is a solid, space-efficient choice for builders prioritizing clean cable routing and modern component clearance.
darkFlash C275P Mini-ITX Case
Best for: Mini-ITX builds with 240mm radiators
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- ITX
- Side Panel
- Tempered Glass
- Included Fans
- 3x PWM ARGB
- Dimensions
- 13.1 × 10.8 × 12.7 inches
- Weight
- 7.32 pounds
View on Amazon: darkFlash C275P Mini-ITX Case Affiliate link
This darkFlash ITX case features a 270-degree panoramic tempered glass panel for a full view of your build. It supports 240mm radiators and includes three pre-installed PWM ARGB fans. The vertical airflow design directs air from the PSU area toward the graphics card. Its compact dimensions are 10.8 x 12.7 x 13.1 inches. This case suits Mini-ITX builders who want clean cable management and strong visual appeal.
Pros
- Supports 240mm radiators for liquid cooling
- Includes three pre-installed PWM ARGB fans
- 270-degree panoramic tempered glass side panel
- Vertical airflow cooling design
Cons
- Supports only Mini-ITX motherboards
- Weighs 7.32 pounds
- Limited to two color options
Good fit if
- You need a case for Mini-ITX components
- You want pre-installed fans for immediate airflow
- You prefer a panoramic glass view
Skip if
- You require ATX or Micro-ATX support
- You want a non-glass side panel
- You need more than two color choices
Verdict: The darkFlash C275P Mini-ITX Case is a compact chassis for Mini-ITX builds that prioritizes visual impact with its 270-degree glass panel and vertical airflow. It fits users who value pre-installed cooling and tidy cable routing in a small footprint.
FOIFKIN M1 Mid-Tower Case
Best for: ATX builds needing top radiator support
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- ATX, M-ATX, ITX
- Case Type
- Mid-Tower
- Side Panel
- Glass
- Included Fans
- 3x 120mm, 3x 140mm PWM ARGB
- Max GPU Length
- 310mm
View on Amazon: FOIFKIN M1 Mid-Tower Case Affiliate link
The FOIFKIN M1 is an ATX mid-tower case with a glass side panel. It supports 240mm and 280mm radiators on top. The case includes six pre-installed PWM ARGB fans for cooling. You get ample space for ATX, M-ATX, and ITX motherboards. It fits GPUs up to 310mm long. This build suits gamers who want high airflow and integrated lighting without extra fan purchases.
Pros
- Supports 240mm and 280mm top radiators
- Includes six pre-installed PWM ARGB fans
- Accepts ATX, M-ATX, and ITX boards
- Tool-less snap-on glass side panel
Cons
- Max GPU length of 310mm is limited for ultra-long cards
- CPU cooler height limit of 174mm restricts large air coolers
- Only one USB 3.0 port on the I/O panel
Good fit if
- You need a mid-tower case with pre-installed fans
- You plan to use a 240mm or 280mm top radiator
- You want a glass side panel for visibility
Skip if
- You require extensive USB 3.0 connectivity options
- You use a CPU cooler taller than 174mm
- You need a case for GPUs longer than 310mm
Verdict: The FOIFKIN M1 ATX Mid-Tower offers strong cooling readiness with six fans and top radiator support. It is a solid choice for builders prioritizing airflow and aesthetics in a standard mid-tower chassis.
Jonsbo D32 Pro Mesh Micro-ATX Case
Best for: compact 240mm liquid cooling and BTF builds
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Mini-ITX, Micro-ATX
- Side Panel
- Tempered Glass
- Max GPU Length
- 365mm
- Case Volume
- 24L
- Use
- Gaming
View on Amazon: Jonsbo D32 Pro Mesh Micro-ATX Case Affiliate link
The Jonsbo Mesh Micro-ATX PC Case is a compact 24-liter chassis built for space-conscious setups. You get dedicated clearance for a 240mm radiator, graphics cards up to 365mm long, and CPU air coolers up to 163mm high. Its interior layout supports standard Mini-ITX and Micro-ATX boards alongside back-connect BTF motherboards via an adjustable mode. It suits you if you need liquid cooling in a smaller desktop footprint.
Pros
- Fits a 240mm liquid cooling radiator
- Supports graphics cards up to 365mm in length
- Compatible with standard and back-connect BTF motherboards
- Compact 24-liter volume fits Mini-ITX and Micro-ATX boards
Cons
- Incompatible with 16A power supply plugs
- 3.5-inch drive capacity shares mounting space with 2.5-inch drives
Good fit if
- You want to mount a 240mm radiator in a 24-liter compact case.
- You plan to build with a back-connect BTF Micro-ATX motherboard.
- You use a long graphics card measuring up to 365mm.
Skip if
- You require dedicated 3.5-inch drive bays without sacrificing 2.5-inch mounts.
- You use a power supply that requires a 16A plug.
Verdict: Jonsbo Mesh Micro-ATX PC Case balances a tight 24-liter footprint with support for 240mm radiators and long graphics cards. Its dual-mode layout makes it especially practical for modern back-connect motherboard builds.
darkFlash Micro-ATX Mesh PC Case
Best for: airflow-focused Micro-ATX builds needing included ARGB fans
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX
- Included Fans
- 3x DR08 PWM ARGB
- Use
- Gaming
- Connectivity
- USB 3.0
- Dimensions
- 8.58 × 13.1 × 15.8 inches
View on Amazon: darkFlash Micro-ATX Mesh PC Case Affiliate link
The darkFlash Micro-ATX Mesh PC Case is a compact tower designed for high airflow and liquid cooling. It fits a 240mm radiator and includes three DR08 PWM ARGB fans alongside a full mesh front panel. With dedicated mounting above the power supply shroud and support for Micro-ATX motherboards, this chassis suits you if you want straight-through ventilation for gaming hardware without purchasing extra cooling fans separately.
Pros
- Supports a 240mm liquid cooling radiator
- Includes three pre-installed DR08 PWM ARGB fans
- Full mesh front panel with top magnetic dust filter
- Two dedicated fan positions above the power supply shroud
Cons
- Does not include an RGB hub controller
- Limited to Micro-ATX and smaller motherboards
Good fit if
- You need 240mm radiator support within a compact Micro-ATX layout.
- You want three pre-installed PWM ARGB fans included out of the box.
- You prioritize intake ventilation via a full mesh front panel.
Skip if
- You plan to install a full-sized ATX motherboard.
- You require an included RGB hub controller to manage lighting.
Verdict: darkFlash Micro-ATX Mesh PC Case delivers solid intake airflow and 240mm radiator clearance with three included PWM ARGB fans. It is a capable, compact chassis for builders who want ready-to-run ventilation.
Mechanic Master C34 Yellow ATX Case
Best for: Portable ATX builds with 240mm cooling
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- ATX
- Max GPU Length
- 335mm
- Dimensions
- 13.5 × 7.28 × 13.5 inches
- Weight
- 9.7 pounds
View on Amazon: Mechanic Master C34 Yellow ATX Case Affiliate link
The Mechanic Master C34 is a compact ATX case that supports standard ATX motherboards and 240mm radiators. It measures 13.5 by 13.5 by 7.28 inches and weighs 9.7 pounds. The design includes a built-in carry handle for portability. It accommodates GPUs up to 335mm long. You should use an SFX power supply for the cleanest build experience.
Pros
- Supports standard ATX motherboards in a small footprint
- Accepts 240mm liquid cooling radiators
- Includes a built-in carry handle for transport
- Fits graphics cards up to 335mm in length
Cons
- Weighs 9.7 pounds, which is heavier than many mini-towers
- Requires an SFX power supply for optimal cable management
- Dimensions are 13.5 x 13.5 x 7.28 inches, limiting internal volume
Good fit if
- You need to transport your PC frequently
- You want to fit an ATX board in a small space
- You plan to use a 240mm AIO cooler
Skip if
- You prefer a standard full-tower size
- You want to use a standard ATX power supply
- You need support for larger 360mm radiators
Verdict: The Mechanic Master C34 ATX Case is a portable option for users who need ATX compatibility in a compact form factor. It suits builders who prioritize mobility and are willing to use SFX power supplies.
Lian Li A4-H2OX5 Mini-ITX Case
Best for: compact Mini-ITX builds with 240mm liquid cooling
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Mini-ITX
- Side Panel
- Mesh
- Case Volume
- 11 L
- Dimensions
- 12.8 × 5.51 × 9.61 inches
- Weight
- 7.56 pounds
View on Amazon: Lian Li A4-H2OX5 Mini-ITX Case Affiliate link
The Lian Li A4-H2OX5 is an 11-liter Mini-ITX case designed for compact builds with liquid cooling. It supports a 240mm radiator and features a unique sandwich layout. A PCIe 5.0 riser cable allows vertical GPU mounting behind the motherboard. The aluminum exterior offers ventilation and a minimalist look. This case suits users who need a small footprint without sacrificing cooling options or modern connectivity standards.
Pros
- Supports 240mm radiators for effective liquid cooling in a small space
- Includes a PCIe Gen. 5 riser cable with 32Gb/s bandwidth
- 11-liter volume fits Mini-ITX motherboards efficiently
- Aluminum exterior provides a minimalist aesthetic and ventilation
Cons
- 11-liter capacity is smaller than most other cases on this list
- Weighs 7.56 pounds, which is heavier than typical plastic alternatives
- Supports only Mini-ITX motherboards, limiting upgrade options to larger formats
Good fit if
- You need a compact case that still supports 240mm liquid cooling
- You want to mount a GPU vertically using a PCIe 5.0 riser
- You prefer a minimalist aluminum design for a small footprint
Skip if
- You require support for ATX or Micro-ATX motherboards
- You need a case larger than 11 liters for easier component installation
- You prefer a plastic chassis to minimize weight below 7.56 pounds
Verdict: The Lian Li A4-H2OX5 Mini-ITX Case is ideal for builders who prioritize a small 11-liter footprint and need 240mm radiator support. It fits users who want to use a PCIe 5.0 riser for vertical GPU mounting in a compact, aluminum enclosure.
RUIX OV502 Pro White Mini-Tower
Best for: compact Micro-ATX builds with 240mm AIOs
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- M-ATX
- Case Type
- Mini Tower
- Side Panel
- Tempered Glass
- Max GPU Length
- 340mm
- Use
- Gaming
View on Amazon: RUIX OV502 Pro White Mini-Tower Affiliate link
The RUIX OV502 Pro is a compact mini-tower featuring dual panoramic tempered glass panels. It supports 240mm AIO liquid coolers and graphics cards up to 340mm in length. The expanded interior layout improves hardware compatibility while keeping the footprint small. You will appreciate the clean aesthetic and efficient airflow. This case suits gamers and creators who want a modern look without sacrificing component space.
Pros
- Dual panoramic tempered glass side panels
- Supports 240mm AIO liquid coolers
- Accommodates GPUs up to 340mm
- Compact mini-tower footprint
Cons
- Smaller internal volume than full-tower alternatives
- Limited to Micro-ATX motherboard support
Good fit if
- You want a compact case with a panoramic glass display
- You need support for a 240mm AIO cooler
- You are building a Micro-ATX gaming system
Skip if
- You require full-tower dimensions for maximum expansion
- You plan to install ATX motherboards
- You prefer a mesh front panel for maximum airflow
Verdict: RUIX OV502 Pro M-ATX Panoramic Case offers a sleek panoramic design for compact Micro-ATX builds. It fits users who prioritize visual appeal and 240mm cooling in a small footprint.
Cooler Master Q300L V3 Micro-ATX Case
Best for: Micro-ATX builds with 240mm radiators and large GPUs
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX
- Side Panel
- Tempered Glass
- Max GPU Length
- 366mm
- Compatible Device
- Graphics Card
- Dimensions
- 15.2 × 15.3 × 12.6 inches
View on Amazon: Cooler Master Q300L V3 Micro-ATX Case Affiliate link
The Cooler Master Q300L V3 is a Micro-ATX case with a tempered glass side panel. It supports 240mm radiators and graphics cards up to 366mm long. The design allows for six 120mm or 140mm fans and CPU air coolers up to 178mm tall. You get a movable I/O panel and magnetic dust filters. This compact tower suits builders who need high airflow and flexible hardware support in a medium-sized chassis.
Pros
- Supports 240mm AIO radiators for liquid cooling
- Fits graphics cards up to 366mm in length
- Accommodates up to six 120mm or 140mm fans
- Includes a tempered glass side panel
- Features a movable I/O panel for cable management
Cons
- Max GPU length of 366mm is shorter than some larger ATX cases
- Micro-ATX motherboard support limits expansion compared to full ATX models
- Weight of 10 pounds adds bulk for portable builds
Good fit if
- You want to install a 240mm radiator in a compact Micro-ATX build
- You need to fit a large graphics card up to 366mm long
- You prefer a tempered glass side panel for visibility
Skip if
- You require support for full-size ATX motherboards
- You need GPU clearance longer than 366mm
- You are building a Mini-ITX system and want the smallest possible footprint
Verdict: Cooler Master Q300L V3 Micro-ATX fits users who need high airflow and 240mm radiator support in a compact, glass-sided Micro-ATX chassis. It is ideal for builders prioritizing GPU length and fan flexibility over maximum motherboard expansion.
Rosewill Hearth NAS PRO E-ATX Chassis
Best for: E-ATX builds needing massive hot-swap storage
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- E-ATX
- Case Type
- Server Chassis
- Included Fans
- 5x 120mm PWM
- Max GPU Length
- 360mm
- Connectivity
- Type-C
View on Amazon: Rosewill Hearth NAS PRO E-ATX Chassis Affiliate link
The Rosewill Hearth NAS PRO is an E-ATX server chassis built for high-density storage and liquid cooling. It supports a 240mm radiator alongside five 120mm PWM fans to keep hardware cool. Inside, you find bays for twelve 3.5-inch hot-swap hard drives, six 2.5-inch SSDs, dual ATX power supplies, and graphics cards up to 360mm. It suits you if you need extensive drive capacity and E-ATX motherboard compatibility.
Pros
- Supports 240mm radiators and includes five 120mm PWM fans
- Houses 12 hot-swap 3.5-inch drive bays and six 2.5-inch SSD mounts
- Dual ATX power supply support for redundant power configurations
- Clearance for E-ATX motherboards and GPUs up to 360mm long
Cons
- Heavy chassis weighing 26.86 pounds empty
- Wide profile measuring 15.75 inches across
- Maximum power supply length restricted to 180mm
Good fit if
- You build a high-capacity storage server using an E-ATX motherboard
- You need tool-free hot-swap access for up to 12 hard drives
- You require dual power supplies alongside a 240mm liquid cooler
Skip if
- You need a compact desktop case that occupies minimal desk space
- You use a power supply that exceeds 180mm in length
Verdict: Rosewill Hearth NAS PRO E-ATX Chassis provides substantial drive expansion and dual-PSU support while maintaining compatibility with a 240mm liquid cooler. It is built specifically for high-capacity multi-drive server deployments.
TGDGAMER Micro-ATX Mini Tower with Handle
Best for: portable Micro-ATX builds with liquid cooling
- Radiator Support
- ✓ 240mm Radiator
- Motherboard Support
- Micro-ATX, Mini-ITX
- Case Type
- Micro-ATX Mini Tower
- Max GPU Length
- 350mm
View on Amazon: TGDGAMER Micro-ATX Mini Tower with Handle Affiliate link
This TGDGAMER micro-ATX mini tower offers top mounting for a 240mm liquid cooling radiator inside a compact 380 by 188 by 308 mm frame. You get support for standard ATX power supplies, graphics cards up to 350 mm, and a built-in top carry handle. It suits you if you need a portable desktop chassis that accommodates liquid cooling without sacrificing compatibility for standard hardware components.
Pros
- Top mounting support for a 240mm radiator
- Reinforced top carry handle with rubber grip
- Supports standard ATX power supplies and GPUs up to 350mm
- Front panel includes a 5Gbps USB-C port
Cons
- Does not include cooling fans or radiators
- GPU clearance drops to 270mm depending on storage drive layout
Good fit if
- You need a portable Micro-ATX chassis with an integrated carry handle.
- You plan to install a 240mm liquid radiator in the top mount.
- You want to use a standard ATX power supply in a compact footprint.
Skip if
- You need a case that includes pre-installed cooling fans.
- You are using a full-size ATX motherboard.
Verdict: TGDGAMER Micro-ATX Mini Tower with Handle pairs 240mm top radiator support with a compact, portable chassis design. It gives you flexible clearance options for standard power supplies and long graphics cards.
Specifications side by side
| Spec | Cooler Master Q300L Modular Micro-ATX Case | Jonsbo Curved Glass Micro ATX Mini Tower | Jonsbo Z20 Mini-Tower with Handle | darkFlash Micro-ATX Panoramic Glass Case | Jonsbo D32 Back-Connect Micro-ATX Case | darkFlash C275P Mini-ITX Case | FOIFKIN M1 Mid-Tower Case | Jonsbo D32 Pro Mesh Micro-ATX Case | darkFlash Micro-ATX Mesh PC Case | Mechanic Master C34 Yellow ATX Case | Lian Li A4-H2OX5 Mini-ITX Case | RUIX OV502 Pro White Mini-Tower | Cooler Master Q300L V3 Micro-ATX Case | Rosewill Hearth NAS PRO E-ATX Chassis | TGDGAMER Micro-ATX Mini Tower with Handle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motherboard Support | Micro-ATX, Mini-ITX | Micro-ATX, Mini-ITX | Micro-ATX | Micro ATX | Micro-ATX, Mini-ITX | ITX | ATX, M-ATX, ITX | Mini-ITX, Micro-ATX | Micro-ATX | ATX | Mini-ITX | M-ATX | Micro-ATX | E-ATX | Micro-ATX, Mini-ITX |
| Case Type | not stated | Mini Tower | Mini Tower | not stated | Micro-ATX | not stated | Mid-Tower | not stated | not stated | not stated | not stated | Mini Tower | not stated | Server Chassis | Micro-ATX Mini Tower |
| Side Panel | Transparent | Tempered Glass | not stated | Tempered Glass | Tempered Glass | Tempered Glass | Glass | Tempered Glass | not stated | not stated | Mesh | Tempered Glass | Tempered Glass | not stated | not stated |
| Included Fans | not stated | not stated | not stated | 3x PWM ARGB | not stated | 3x PWM ARGB | 3x 120mm, 3x 140mm PWM ARGB | not stated | 3x DR08 PWM ARGB | not stated | not stated | not stated | not stated | 5x 120mm PWM | not stated |
| Radiator Support | 240mm | 240mm | 240mm | 240mm | 240mm | 240mm | 280mm | 240mm | 240mm | 240mm | 240mm | 240mm | 240mm | 240mm | 240mm |
| Max GPU Length | 360mm | 280mm | 363mm | not stated | 365mm | not stated | 310mm | 365mm | not stated | 335mm | not stated | 340mm | 366mm | 360mm | 350mm |
| Case Volume | not stated | not stated | about 20L | not stated | 24L | not stated | not stated | 24L | not stated | not stated | 11 L | not stated | not stated | not stated | not stated |
| Tower Size | not stated | Mini-Tower | Mini-Tower | not stated | not stated | not stated | Mid-Tower | not stated | not stated | not stated | not stated | Mini-Tower | not stated | not stated | Mini-Tower |
| Fan Size | not stated | not stated | not stated | not stated | not stated | not stated | 120mm, 140mm | not stated | not stated | not stated | not stated | not stated | not stated | 120mm | not stated |
| Use | not stated | not stated | not stated | Gaming | Gaming | not stated | Gaming | Gaming | Gaming | not stated | not stated | Gaming | not stated | Server | not stated |
| Lighting | not stated | not stated | not stated | ARGB | not stated | ARGB | ARGB | not stated | ARGB | not stated | not stated | not stated | not stated | not stated | not stated |
| Connectivity | not stated | not stated | not stated | Type-C | not stated | not stated | Type-C | not stated | USB 3.0 | not stated | not stated | USB 3.0 | not stated | Type-C | not stated |
| Compatible Device | Graphics Card | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | Graphics Card | not stated | not stated |
| Dimensions | 15.4 × 9.06 × 15 inches | 12.2 × 11.8 × 13.6 inches | 13 × 13 × 7.5 inches | 8.58 × 13.1 × 15.8 inches | 15.6 × 8.15 × 12.4 inches | 13.1 × 10.8 × 12.7 inches | 16.2 × 7.87 × 17.7 inches | 15.6 × 8.15 × 12.4 inches | 8.58 × 13.1 × 15.8 inches | 13.5 × 7.28 × 13.5 inches | 12.8 × 5.51 × 9.61 inches | 14 × 11 × 13 inches | 15.2 × 15.3 × 12.6 inches | 16.6 × 15.8 × 14.8 inches | not stated |
| Weight | 1.06 pounds | not stated | not stated | not stated | 12 pounds | 7.32 pounds | not stated | not stated | not stated | 9.7 pounds | 7.56 pounds | not stated | 10 pounds | 26.9 pounds | not stated |
| Size | Micro-ATX | not stated | not stated | not stated | not stated | not stated | M1 | not stated | not stated | not stated | 3.70 | not stated | Medium | E-ATX | not stated |
| Color | Dark Gray | WHITE | BLACK | White | Black | Black | Black | Black | White | Yellow | Black | White | Black | Black | not stated |
| Model | MCB-Q300L-KANN-S00 | not stated | not stated | DB330M | not stated | C275P | K6 | D32 pro mesh | DB330 MESH | not stated | A4H2OX5 | OV502Pro | Q300LV3-KGNN-S00 | HEARTH NAS PRO | DY6-PRO |
Is 240mm Radiator Support Worth It?
Cases supporting a 240mm radiator give you dual 120mm liquid cooling mounts without requiring the long chassis profiles of larger frames. This specification lets you install closed-loop liquid coolers in compact mini-towers, standard mid-towers, and multi-drive storage chassis. You gain dedicated liquid cooling clearance over the CPU socket area while maintaining room for full-size ATX power supplies and discrete graphics cards. Choosing a case with 240mm radiator support secures balanced cooling capacity for smaller desk setups or portable enclosures without restricting essential internal hardware.
Worth it if
- You plan to install a dual-fan liquid CPU cooler inside a compact Mini-Tower or portable chassis.
- You need dedicated liquid cooling clearance without sacrificing space for standard ATX power supplies or storage drives.
Skip it if
- You intend to use simple air coolers and do not need liquid cooling brackets.
- You require large cooling assemblies that demand 280mm or 360mm mounting locations.
How We Picked These Cases
You find cases here identified strictly by 240mm radiator support. Every selection requires explicit confirmation of 240mm radiator mounting in published listing titles or feature specifications. Listings without confirmed support are excluded. To maintain variety across Mini-Tower, Mid-Tower, and E-ATX sizes, you see only one variant per product family.
You see products in stock first. All details come directly from published specifications and feature lists on the listings. Products are not physically handled. You compare options using verified specs, including Micro-ATX, ATX, and E-ATX motherboard support, chassis dimensions, and cooling layouts. Listing availability updates daily on the page.
How to Choose a 240mm Radiator Case
-
Verify Radiator Thickness Clearances
Check the maximum thickness supported for your 240mm radiator and fan combination. Standard liquid coolers require around 52mm to 55mm of clearance for the radiator and fans combined. If you run thicker radiators or push-pull configurations, standard clearances can cause interference with motherboard heatsinks or RAM. The Jonsbo Z20 accommodates a 60mm-thick 240mm radiator setup inside its compact chassis, giving you the necessary room for beefier cooling hardware without crowding adjacent components.
-
Confirm Front Panel Connectivity
Inspect the front panel ports before selecting a chassis to ensure your peripheral needs are met. Cases offering USB 3.0 Type-A provide standard compatibility with legacy drives and peripherals, but modern high-speed external storage often demands USB Type-C. If you regularly transfer large files, ensure the front I/O includes a dedicated Type-C port rather than relying solely on motherboard rear outputs. The FOIFKIN M1 integrates front-panel Type-C connectivity directly into its frame, ensuring convenient access for modern devices.
-
Check Back-Connect Motherboard Support
Review the motherboard tray cutouts if you plan to build with reverse-connector motherboards. Standard cases only feature perimeter cable cutouts, which block access to rear-mounted power and data headers found on back-connect boards. Cases built for dual-mode support allow you to mount conventional motherboards as well as back-connect models with all plugs positioned cleanly behind the tray. The Jonsbo D32 Pro Mesh features dedicated back-connect support, letting you hide your cabling completely out of view.
-
Examine Graphics Card Length Limits
Compare the maximum graphics card clearance against the length of your chosen video card. Liquid cooling setups in compact chassis often share interior volume with the graphics card, especially when power supplies or radiators mount near the front panel. Make sure your card fits comfortably with extra margin for power cable routing. The Jonsbo Curved Glass Micro ATX Mini Tower specifies a strict 280mm maximum graphics card length, which requires verifying your GPU dimensions before buying.
-
Count Included Case Fans
Check the included fan configuration to evaluate your out-of-the-box airflow. While your 240mm liquid cooler provides two 120mm exhaust or intake fans, you still need dedicated case fans to move cool air across the motherboard, storage, and graphics card. Cases without pre-installed fans require sourcing additional cooling separately. The darkFlash Micro-ATX Mesh PC Case includes three pre-installed PWM ARGB fans, providing complete intake ventilation to balance the airflow of your 240mm radiator without extra fan purchases.
-
Consider Portable Handle Options
Evaluate the chassis exterior if you plan to transport your liquid-cooled system between locations. Compact mini-towers pack high cooling density into small volumes, but carrying a fully built steel chassis can be awkward without dedicated grip points. Cases equipped with sturdy top-mounted handles let you move your rig securely without gripping glass panels or delicate mesh filters. The TGDGAMER Micro-ATX Mini Tower features an integrated carry handle alongside top 240mm radiator support for convenient mobility.
Frequently asked questions
Which case is best for a compact Micro-ATX build with a 240mm radiator?
The Cooler Master Q300L Modular Micro-ATX Case is the top pick for compact builds. It measures 9.06 inches wide and 15.4 inches long, offering strong GPU clearance. This chassis supports 240mm radiators while maintaining a small footprint ideal for users prioritizing airflow and flexible I/O.
Can I fit a 240mm radiator in a Mini-ITX case?
Yes, several Mini-ITX cases support 240mm radiators. The Lian Li A4-H2OX5 offers a 11-liter footprint with vertical airflow and a 270-degree glass panel. The darkFlash C275P also accommodates Mini-ITX boards with 240mm cooling and pre-installed ARGB fans for tidy cable routing in a small enclosure.
What is the best mid-tower option for top radiator mounting?
The FOIFKIN M1 is the recommended mid-tower choice for ATX builds. It supports 240mm radiators on the top and includes six fans for strong airflow. Measuring 17.7 inches high and 16.2 inches long, it provides ample space for standard components while prioritizing cooling readiness and aesthetics.
Are there portable cases that support 240mm liquid cooling?
Yes, portable options include the Jonsbo Z20 and the TGDGAMER Micro-ATX Mini Tower with Handle. The Jonsbo Z20 fits a 240mm radiator inside a 20-liter steel chassis with a handle. The TGDGAMER model pairs top radiator support with flexible clearance for standard power supplies and long graphics cards.
Which case supports E-ATX motherboards with a 240mm radiator?
The Rosewill Hearth NAS PRO E-ATX Chassis is designed for E-ATX builds. It maintains compatibility with a 240mm liquid cooler while supporting dual power supplies and massive hot-swap storage. Measuring 15.8 inches wide and 16.6 inches long, it is built for high-capacity multi-drive server deployments.
Do any of these cases include pre-installed fans?
Several models come with pre-installed cooling. The darkFlash Micro-ATX Mesh PC Case includes three PWM ARGB fans for solid intake airflow. The darkFlash C275P Mini-ITX Case also features pre-installed cooling to ensure tidy cable routing and ready-to-run ventilation out of the box for compact builds.
Can I use back-connect motherboards in these cases?
Yes, specific models support back-connect motherboards. The Jonsbo D32 and D32 Pro Mesh offer dual-mode motherboard mounting for clean cable routing. These Micro-ATX cases provide 240mm radiator support and strong cooling flexibility, making them practical choices for builders using modern back-connect component layouts.
See also
- best thermaltake PC cases
- best lian li PC cases
- best okinos PC cases
- best PC cases under 100
- best PC cases under 150
- 15 Best PC Cases Under $200, Compared
- Best ATX PC Cases in 2026: 15 Picks Ranked by Specs
- Best Micro-Atx PC Cases: 15 Spec-Based Picks
- best black tablet cases
- best 750W PC power supplies














