Best PC Cases with Tempered Glass: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best PC cases with tempered glass requires matching your motherboard size to the chassis dimensions. We compared 15 options based strictly on published specifications. The ASUS ROG Strix Helios RGB Mid-Tower Case leads because its 23.3-inch height accommodates E-ATX boards and large GPUs. This guide helps you decide which case fits your build size, cooling needs, and component clearance.
Helpful first: What Is Side Panel? A Guide for PC Cases Buyers (2026)
Quick picks
The best fit for you
- You need E-ATX support with multi-GPU mounting ASUS ROG Strix Helios RGB Mid-Tower Case It supports E-ATX motherboards and offers extensive GPU mounting options.
- You want the most compact Mini-ITX vertical build Silverstone LD03B Mini-ITX Case It is a vertical Mini-ITX case with a small footprint.
- You are building a compact Micro-ATX system Montech AIR 100 ARGB Micro-ATX Case It fits Micro-ATX boards and includes ARGB lighting.
Our 15 picks
ASUS ROG Strix Helios RGB Mid-Tower Case
Best for: E-ATX builders needing multi-GPU support
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- EATX
- Case Type
- Mid-Tower
- Included Fans
- 4x 140mm
- Radiator Support
- 420mm
- Max GPU Length
- 450mm
View on Amazon: ASUS ROG Strix Helios RGB Mid-Tower Case Affiliate link
The ASUS ROG Strix Helios is a mid-tower case with a metal chassis and 4mm-thick smoked tempered glass side panels. It supports E-ATX motherboards and radiators up to 420mm. The build includes four 140mm fans and a built-in hub. You get seven optional fan mounts and space for nine storage drives. This case suits builders needing extensive expansion slots for multiple graphics cards.
Pros
- Supports E-ATX motherboards in a mid-tower form factor
- Includes four 140mm fans and a built-in fan hub
- Accommodates radiators up to 420mm in length
- Offers seven expansion slots for up to three horizontal or two vertical GPUs
Cons
- Heavier at 39.7 pounds compared to lighter mesh or compact alternatives
- Smaller internal volume limits GPU length to 450mm, whereas some competitors support longer cards
- Fewer included fans than cases shipping with six or more pre-installed units
Good fit if
- You need support for E-ATX motherboards in a mid-tower chassis
- You plan to install liquid cooling with radiators up to 420mm
- You want to mount multiple graphics cards using the seven expansion slots
Skip if
- You require a case under 30 pounds for easier handling
- You need support for graphics cards longer than 450mm
- You prefer a case with more than four pre-installed fans
Verdict: The ASUS ROG Strix Helios E-ATX Mid-Tower fits builders who prioritize E-ATX support and extensive GPU mounting options within a tempered glass chassis. It is ideal for users willing to manage a heavier case for superior expansion capabilities.
Silverstone LD03B Mini-ITX Case
Best for: Compact Mini-ITX vertical builds with glass
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- Mini-DTX, Mini-ITX
- Case Type
- Mini-ITX
- Included Fans
- 2x 120mm
- Radiator Support
- 120mm
- Dimensions
- 10.4 × 16.3 × 9.06 inches
View on Amazon: Silverstone LD03B Mini-ITX Case Affiliate link
This SilverStone LD03B is a vertical Mini-ITX case featuring tinted tempered glass side panels. It has a compact footprint measuring 16.3 by 10.4 by 9.06 inches. The design includes two 120mm fans and supports up to two 120mm radiators. You get clean integration with no cables or vents on the four sides. It fits Mini-DTX or Mini-ITX motherboards and SFX power supplies.
Pros
- Tinted tempered glass side panels for visibility
- Vertical design with a compact 16.3-inch width
- Includes two 120mm fans for airflow
- Supports up to two 120mm radiators
- Compatible with Mini-ITX and Mini-DTX boards
Cons
- Limited to Mini-ITX motherboard form factors
- Requires SFX or SFX-L power supply units
- Heavier at 13.9 pounds compared to standard mid-towers
Good fit if
- You need a small footprint for tight spaces
- You prefer a vertical display with glass sides
- You use Mini-ITX components and SFX PSUs
Skip if
- You require ATX or larger motherboard support
- You need standard ATX power supply compatibility
- You want a full tower for multiple drives
Verdict: SilverStone LD03B Mini-ITX Vertical Case suits users who need a compact vertical build with glass visibility. It fits those using Mini-ITX parts and SFX power supplies who value a small footprint.
Bgears b-Voguish E-ATX Tempered Glass Case
Best for: builders supplying their own custom cooling setup
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- E-ATX, ATX, Micro-ATX, mini-ITX
- Radiator Support
- 240mm
- Max GPU Length
- 370mm
- Use
- Gaming
- Connectivity
- USB 3.0
View on Amazon: Bgears b-Voguish E-ATX Tempered Glass Case Affiliate link
The Bgears b-Voguish is a black computer chassis built with a 5mm thick hinged swing-open tempered glass side panel. It gives you room for large motherboards ranging from Mini-ITX up to E-ATX, alongside graphics cards up to 370mm long. Because this base version includes no pre-installed cooling fans, it suits you if you plan to install your own fans or liquid coolers.
Pros
- Hinged 5mm thick tempered glass side panel
- Accommodates motherboards up to E-ATX and GPUs up to 370mm
- Dual 240mm radiator support at the front and top
- Removable magnetic dust filter included
Cons
- Does not include any cooling fans out of the box
- CPU cooler clearance is capped at 160mm
Good fit if
- You already have dedicated case fans or liquid radiators ready to install.
- You want easy interior access via a swinging hinged tempered glass panel.
- You build with a larger ATX or E-ATX motherboard.
Skip if
- You need a chassis that includes pre-installed cooling fans.
- You plan to mount an air CPU cooler taller than 160mm.
Verdict: Bgears b-Voguish E-ATX Tempered Glass Case delivers a thick 5mm swing-out window and generous motherboard clearance for builders who prefer to install their own cooling.
Anidees AI Crystal XL Full Tower
Best for: oversized builds and extreme custom liquid cooling
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- HPTX, XL-ATX, E-ATX, ATX, m-ATX
- Case Type
- Full Tower
- Radiator Support
- 480 mm
- Max GPU Length
- 530 mm
- Use
- Gaming
View on Amazon: Anidees AI Crystal XL Full Tower Affiliate link
This full-tower chassis features a tempered glass side panel alongside interchangeable mesh and glass front panels. It accommodates massive hardware configurations, supporting motherboards up to HPTX, graphics cards up to 530 mm, and CPU coolers up to 190 mm in height. With space for up to 20 120 mm fans and dual 480 mm radiators, it suits you if you plan an expansive liquid-cooling loop or need twelve drive bays.
Pros
- Includes interchangeable mesh and tempered glass front panels
- Supports up to 20 120 mm fans and dual 480 mm radiators
- Accommodates motherboards up to HPTX and graphics cards up to 530 mm
- Configurable storage cage accommodates up to 12 drives or ODD bays
Cons
- Heavy chassis weighing over 44 pounds empty
- Large footprint exceeding 24 inches in length and 23 inches in height
- Vertical GPU mounting thickness limited to 49 mm
Good fit if
- You need extreme cooling capacity for up to 20 fans or multiple large radiators.
- You build with oversized HPTX, XL-ATX, or E-ATX motherboards.
- You require mounting space for up to 12 hard drives or optical drives.
Skip if
- You have limited floor or desk space for a deep chassis.
- You want a lightweight enclosure that is easy to transport.
- You plan to vertically mount a graphics card thicker than 49 mm.
Verdict: Anidees AI Crystal XL Full Tower delivers massive component clearance and extreme cooling options for oversized builds. Its modular internal layout easily accommodates complex liquid-cooling loops and large storage arrays.
Fractal Design Meshify 2 Mid-Tower Case
Best for: E-ATX builds with high storage needs
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX, up to 285 mm E-ATX
- Case Type
- Mid Tower
- Radiator Support
- 420 mm
- Dimensions
- 21.3 × 9.45 × 18.7 inches
- Weight
- 23.1 pounds
View on Amazon: Fractal Design Meshify 2 Mid-Tower Case Affiliate link
This mid-tower case features a light tinted tempered glass side panel and an angular mesh front for filtered airflow. It supports motherboards up to E-ATX and holds radiators up to 420 mm on top. The interior offers flexible layout options and mounts for up to 11 HDDs. You get a sturdy build weighing 23.1 pounds. It suits builders who want high airflow and extensive drive capacity in a spacious chassis.
Pros
- Light tinted tempered glass side panel
- Supports motherboards up to 285 mm E-ATX
- Fits radiators up to 420 mm on top
- Holds up to 11 HDDs with 4 SSD mounts
- Hinged mesh front with removable nylon filter
Cons
- Heavier build at 23.1 pounds compared to lighter competitors
- Mid-tower size limits compatibility with full tower components
- Light tint glass offers less clarity than clear glass options
Good fit if
- You need support for E-ATX motherboards
- You want to mount multiple hard drives
- You prefer high airflow mesh designs
Skip if
- You require a full tower chassis
- You want a clear glass side panel
- You need a lightweight portable case
Verdict: Fractal Design Meshify 2 Mid-Tower fits builders who prioritize airflow and storage capacity over weight. It is a practical choice for E-ATX systems needing extensive drive mounting options.
Fractal Design Pop Air RGB ATX Case
Best for: Colorful ATX builds with clear glass panels
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX / mATX / Mini ITX
- Radiator Support
- 280 mm front, 240 mm top, 120 mm rear
- Lighting
- RGB
- Dimensions
- 18.6 × 8.46 × 17.9 inches
- Weight
- 19.2 pounds
View on Amazon: Fractal Design Pop Air RGB ATX Case Affiliate link
This ATX mid-tower case features a clear tinted tempered glass side panel to showcase your build. It includes three 120 mm Aspect 12 RGB fans and supports up to five total. The interior offers space for three HDDs or six SSDs. It accepts radiators up to 280 mm in the front. The vibrant orange accents add color to your setup.
Pros
- Tempered glass side panel with clear tint
- Includes three 120 mm Aspect 12 RGB fans
- Supports up to six SSDs or three HDDs
- Accommodates 280 mm front radiators
Cons
- Limited to ATX motherboards, excluding XL-ATX support
- Heavier build at 19.2 pounds compared to compact alternatives
- Smaller internal volume than full tower options on this list
Good fit if
- You want a vibrant orange accent color for your build
- You need reliable support for ATX and smaller motherboards
- You prefer pre-installed RGB fans for immediate lighting
Skip if
- You require XL-ATX motherboard support
- You prefer a minimalist black aesthetic over colored accents
- You need a compact Mini-ITX form factor
Verdict: Fractal Design Pop Air RGB Orange Core offers a colorful, well-ventilated ATX chassis with pre-installed RGB fans. It suits builders who want a vibrant mid-tower with strong storage options and clear glass visibility.
Fractal Design Torrent Compact ATX Mid-Tower
Best for: high-airflow ATX builds with large intake fans
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Use
- Gaming
- Lighting
- RGB
- Connectivity
- Type-C
View on Amazon: Fractal Design Torrent Compact ATX Mid-Tower Affiliate link
The Fractal Design Torrent Compact RGB is an ATX mid-tower case built around light-tint tempered glass side panels and high airflow. You get two 180 by 38 mm Prisma ARGB PWM intake fans behind an open front grille, a top-mounted PSU shroud with integrated ARGB lighting, and front Type-C connectivity. This case suits you if you want focused air intake and clean glass presentation for an ATX gaming build.
Pros
- Two 180 x 38 mm Prisma ARGB PWM intake fans included
- Open front grille for direct airflow
- Light-tint tempered glass side panels
- Top-mounted PSU shroud with integrated ARGB lighting
- Front-panel USB Type-C support
Cons
- Bottom fan clearance requires leaving the bottom PCI slot free
- Chassis weight is over 20 pounds
Good fit if
- You want extra-thick 180 mm intake fans included with the chassis.
- You use an ATX motherboard and need a front USB Type-C port.
- You prefer light-tint tempered glass to show internal components.
Skip if
- You need to populate all expansion slots while running base intake fans.
- You prefer a traditional bottom-mounted power supply layout.
Verdict: Fractal Design Torrent Compact RGB ATX Case delivers direct air intake via two 180 mm front fans and an open grille. It pairs high airflow with light-tint tempered glass for clean ATX gaming setups.
Montech X3 Mesh ATX Mid-Tower Case
Best for: Standard ATX builds with panoramic glass views
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Included Fans
- 6x Fixed RGB
- Radiator Support
- 240mm
- Max GPU Length
- 305mm
View on Amazon: Montech X3 Mesh ATX Mid-Tower Case Affiliate link
The Montech X3 Mesh offers a panoramic tempered glass front and side for full component visibility. It includes six fixed RGB fans to optimize airflow and lighting. The case supports ATX motherboards and GPUs up to 305mm long. Its side panel features a zero-drill-hole swivel design for easier access. This mid-tower case provides a practical build space for standard ATX systems.
Pros
- Full panoramic tempered glass front and side panels
- Six pre-installed fixed RGB fans for airflow
- Supports ATX motherboards and 305mm GPUs
- Zero-drill-hole swivel side panel design
- Includes USB 3.0 connectivity
Cons
- Fixed RGB lighting cannot be individually addressed
- Supports only 240mm radiators
- Heavier at 11.9 pounds
Good fit if
- You want a panoramic view of your RGB components
- You need a standard ATX mid-tower case
- You prefer pre-installed fans for immediate airflow
Skip if
- You require addressable RGB lighting control
- You need support for larger E-ATX motherboards
- You want to install radiators larger than 240mm
Verdict: Montech X3 Mesh ATX Mid-Tower is a solid choice for builders who prioritize wide glass visibility and standard ATX compatibility. It suits users who want a ready-to-build case with ample airflow and simple lighting control.
Montech AIR 100 ARGB Micro-ATX Case
Best for: compact Micro-ATX builds with tempered glass
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- Micro-ATX, Mini-ITX
- Case Type
- Micro ATX
- Included Fans
- 4x 120mm ARGB
- Radiator Support
- 280mm
- Max GPU Length
- 330mm
View on Amazon: Montech AIR 100 ARGB Micro-ATX Case Affiliate link
The Montech Air 100 ARGB is a compact Micro-ATX case with a tempered glass side panel. It supports Mini-ITX boards and includes four 120mm ARGB fans. The chassis measures 15.9 x 8.27 x 16.7 inches and weighs 13.2 pounds. It fits GPUs up to 330mm long. This case suits builders who want pre-installed lighting and airflow in a smaller footprint.
Pros
- Tempered glass side panel for visibility
- Four pre-installed 120mm ARGB fans
- Supports Micro-ATX and Mini-ITX motherboards
- Fits GPUs up to 330mm long
Cons
- Micro-ATX form factor limits motherboard options
- 13.2 pound weight is substantial for its size
- 330mm GPU length is shorter than full towers
Good fit if
- You need a Micro-ATX case with tempered glass
- You want pre-installed ARGB fans for lighting
- You have limited desk space for a PC
Skip if
- You require full ATX or E-ATX board support
- You need a case larger than 16.7 inches tall
- You prefer a case under 10 pounds
Verdict: Montech Air 100 ARGB Micro ATX fits users who want a compact, glass-sided build with included lighting. It works well for Micro-ATX systems where space is tight.
Lian Li Lancool 205 Mesh Mid-Tower Case
Best for: ATX gaming builds needing pre-installed ARGB cooling
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX, Micro ATX, Mini-ITX
- Case Type
- Mid-Tower
- Use
- Gaming
- Lighting
- ARGB
- Dimensions
- 29.2 × 29.2 × 11.6 inches
View on Amazon: Lian Li Lancool 205 Mesh Mid-Tower Case Affiliate link
The Lian Li Lancool 205 Mesh is a mid-tower PC case built with a tempered glass side panel for component visibility. It includes two 140mm front ARGB PWM fans and one 120mm rear ARGB fan. The chassis fits ATX, Micro ATX, and Mini-ITX motherboards and features top and bottom magnetic dust filters. Choose this chassis if you want pre-installed airflow fans, built-in lighting controls, and clear hardware visibility.
Pros
- Includes two 140mm front and one 120mm rear ARGB PWM fans
- Tempered glass side panel shows internal components clearly
- Dedicated top C/M button manages 7 lighting modes and motherboard sync
- Equipped with removable SSD brackets and swappable top fan brackets
Cons
- Top I/O panel lacks a USB Type-C port
- Motherboard support limited to standard ATX, Micro ATX, and Mini-ITX
Good fit if
- You want a tempered glass side panel with three pre-installed ARGB PWM fans.
- You build with a standard ATX, Micro ATX, or Mini-ITX motherboard.
- You prefer dedicated top-panel lighting control with motherboard sync support.
Skip if
- You require an integrated front-panel USB Type-C port.
- You plan to install a larger E-ATX motherboard.
Verdict: Lian Li Lancool 205 Mesh Mid-Tower Case delivers direct airflow and hardware visibility through its mesh front, tempered glass window, and three ARGB fans. It provides straightforward component mounting for standard ATX setups.
G.SKILL Z5i Mini-ITX Tempered Glass Case
Best for: compact Mini-ITX builds with large GPUs
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- Mini-ITX
- Radiator Support
- Up to 280mm
- Max GPU Length
- Up to 330mm
- Dimensions
- 12.1 × 7.48 × 16.4 inches
- Weight
- 2.2 pounds
View on Amazon: G.SKILL Z5i Mini-ITX Tempered Glass Case Affiliate link
This compact Mini-ITX case features a curved 4mm tempered glass side panel. It supports high-end GPUs up to 330mm long and 280mm AIO radiators. The design includes a tool-less side panel hinge and a magnetic top dust filter. You get front I/O with USB 3.0 and USB 3.1 Type-C ports. It is built for small form factor builds with SFX power supplies.
Pros
- Curved 4mm tempered glass side panel
- Supports GPUs up to 330mm length
- Tool-less side panel hinge design
- Includes PCIe 3.0 extension cable
Cons
- Limited to Mini-ITX motherboard support
- Requires SFX power supplies
- Heavier at 2.2 pounds for its size
Good fit if
- You are building a compact Mini-ITX PC
- You need support for large GPUs or 280mm AIOs
- You want easy access via tool-less hinges
Skip if
- You need ATX or E-ATX motherboard support
- You prefer standard ATX power supplies
- You want a larger mid-tower form factor
Verdict: G.SKILL Z5i Mini-ITX Tempered Glass Case fits builders who need a small footprint without sacrificing GPU or cooler size. It is ideal for compact systems using Mini-ITX boards and SFX power supplies.
Antec Dark Phantom DP31 Mini-Tower
Best for: compact micro-ATX builds with glass panels
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- M-ATX
- Case Type
- Mini-Tower
- Included Fans
- 1 x 120mm
- Use
- Gaming
- Lighting
- ARGB
View on Amazon: Antec Dark Phantom DP31 Mini-Tower Affiliate link
This Antec mini-tower supports micro-ATX motherboards and features a magnetic, screw-free tempered glass side panel. Claw-shaped air intakes and an irregular ARGB strip define the front design. It includes one 120mm rear fan and six pre-installed motherboard fixings. The build measures 15.7 by 15.7 by 7.87 inches. You get a compact chassis with visible internals and basic pre-installation.
Pros
- Magnetic screw-free tempered glass side panel
- Claw-shaped front air intakes for cooling
- Six pre-installed motherboard fixings
- Includes one 120mm rear fan
Cons
- Supports only micro-ATX motherboards
- Includes only one fan
- Heavier at 6.39 pounds
Good fit if
- You build with a micro-ATX motherboard
- You want a compact mini-tower design
- You prefer screw-free tempered glass panels
Skip if
- You need support for ATX or larger boards
- You require multiple pre-installed case fans
- You prefer a full-tower chassis
Verdict: Antec DP31 Mini-Tower M-ATX Case fits builders who want a compact micro-ATX chassis with a visible glass side panel. It suits those who value easy installation and basic airflow over high fan counts or larger board support.
Lian Li LANCOOL II Mesh C Mid-Tower Case
Best for: high-airflow E-ATX builds needing massive storage
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- E-ATX
- Case Type
- Mid Tower
- Included Fans
- 2x 140mm PWM, 1x 120mm PWM
- Dimensions
- 22 × 22 × 12 inches
- Weight
- 26.5 pounds
View on Amazon: Lian Li LANCOOL II Mesh C Mid-Tower Case Affiliate link
The Lian Li LANCOOL II Mesh C is an E-ATX mid-tower case featuring 4mm tempered glass side panels and flip shroud doors. You get steel construction, three pre-installed PWM fans including two 140mm front intakes, and mounting for up to nine drives. It suits you if you need broad motherboard support, modular radiator positioning, and ample cooling right out of the box.
Pros
- Includes three pre-installed PWM fans with two 140mm front intakes
- Accommodates up to nine storage drives using modular cages and bays
- Multi-way bracket supports four radiator and fan configurations
- Full E-ATX motherboard compatibility in a mid-tower form factor
Cons
- Heavy empty chassis weight of over 26 pounds
- Requires substantial desk depth due to its 22-inch length
Good fit if
- You need room for up to nine storage drives.
- You use an E-ATX motherboard and want 140mm intake fans.
- You prefer hinged panels for toolless component access.
Skip if
- You need a lightweight case that is easy to transport.
- You have limited workspace depth for a 22-inch long chassis.
Verdict: Lian Li LANCOOL II Mesh C Mid-Tower delivers high-airflow cooling and extensive drive space behind 4mm tempered glass panels. Its pre-installed 140mm fans and E-ATX support make it a versatile chassis for demanding builds.
MUSETEX ATX Mid-Tower with Magnetic Glass Door
Best for: airflow builds needing pre-installed ARGB fans
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Included Fans
- 6x PWM ARGB
- Radiator Support
- 280mm
- Use
- Gaming
View on Amazon: MUSETEX ATX Mid-Tower with Magnetic Glass Door Affiliate link
This ATX mid-tower case features a magnetic tempered glass side door with a pull ring for tool-free interior access. You get six pre-installed PWM ARGB fans and a polygonal mesh front panel for ventilation. The chassis accommodates ATX motherboards, up to six total drives, and a top 280mm radiator. This layout suits you if you need pre-configured cooling and simple access to your components.
Pros
- Six pre-installed PWM ARGB fans
- Magnetic tempered glass side door with pull ring
- Polygonal mesh front panel for direct intake
- Supports up to a top 280mm radiator
- Accommodates up to six storage drives
Cons
- Requires a 3-pin ARGB motherboard header for lighting control
- No front-panel USB Type-C port listed
- Motherboard support limited to standard ATX without E-ATX compatibility
Good fit if
- You want tool-free interior access via an opening magnetic glass door.
- You want six pre-installed PWM ARGB fans included out of the box.
- You plan to mount up to six storage drives.
Skip if
- You need a front-panel USB Type-C connection.
- You use an E-ATX or larger motherboard.
- You lack a 3-pin ARGB header on your motherboard.
Verdict: MUSETEX ATX Mid-Tower with Magnetic Glass Door provides high airflow and straightforward component access through six pre-installed PWM fans and a hinged glass panel. It gives you a fully populated cooling configuration without requiring extra fan purchases.
Fractal Design North ATX Mid-Tower Case
Best for: ATX builds wanting wood accents and tempered glass
- Side Panel
- Tempered Glass (what this guide is about)
- Motherboard Support
- ATX, mATX, ITX
- Case Type
- Mid Tower
- Included Fans
- 2x 140 mm Aspect PWM
- Radiator Support
- 360 mm
- Max GPU Length
- 355 mm
View on Amazon: Fractal Design North ATX Mid-Tower Case Affiliate link
The Fractal Design North is an ATX mid-tower case pairing a dark-tinted tempered glass side panel with genuine walnut front bars. It comes with two 140 mm Aspect PWM fans and supports ATX, mATX, and ITX motherboards. You get 355 mm of graphics card clearance, dropping to 300 mm if you mount a 360 mm front radiator. It suits you if you want a tempered glass build with natural wood accents and Type-C connectivity.
Pros
- Includes two 140 mm Aspect PWM intake fans
- Front panel features genuine walnut wood bars with open ventilation
- Supports graphics cards up to 355 mm in length
- Includes dedicated USB Type-C connectivity on the front I/O
Cons
- GPU clearance drops to 300 mm when using a 360 mm front radiator
- Does not include pre-installed rear or top exhaust fans
- Lacks support for larger E-ATX motherboards
Good fit if
- You need a mid-tower case with a dark tempered glass panel and Type-C front port.
- You plan to run an ATX, mATX, or Mini-ITX motherboard with up to a 355 mm GPU.
- You want pre-installed 140 mm PWM intake fans out of the box.
Skip if
- You need support for an E-ATX motherboard.
- You plan to mount a 360 mm front radiator alongside a graphics card longer than 300 mm.
Verdict: Fractal Design North ATX Mid-Tower Case combines tempered glass with real walnut accents, 140 mm PWM fans, and 355 mm GPU clearance. It delivers practical airflow and hardware capacity for standard ATX configurations.
Specifications side by side
| Spec | ASUS ROG Strix Helios RGB Mid-Tower Case | Silverstone LD03B Mini-ITX Case | Bgears b-Voguish E-ATX Tempered Glass Case | Anidees AI Crystal XL Full Tower | Fractal Design Meshify 2 Mid-Tower Case | Fractal Design Pop Air RGB ATX Case | Fractal Design Torrent Compact ATX Mid-Tower | Montech X3 Mesh ATX Mid-Tower Case | Montech AIR 100 ARGB Micro-ATX Case | Lian Li Lancool 205 Mesh Mid-Tower Case | G.SKILL Z5i Mini-ITX Tempered Glass Case | Antec Dark Phantom DP31 Mini-Tower | Lian Li LANCOOL II Mesh C Mid-Tower Case | MUSETEX ATX Mid-Tower with Magnetic Glass Door | Fractal Design North ATX Mid-Tower Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motherboard Support | EATX | Mini-DTX, Mini-ITX | E-ATX, ATX, Micro-ATX, mini-ITX | HPTX, XL-ATX, E-ATX, ATX, m-ATX | ATX, up to 285 mm E-ATX | ATX / mATX / Mini ITX | ATX | ATX | Micro-ATX, Mini-ITX | ATX, Micro ATX, Mini-ITX | Mini-ITX | M-ATX | E-ATX | ATX | ATX, mATX, ITX |
| Case Type | Mid-Tower | Mini-ITX | not stated | Full Tower | Mid Tower | not stated | Mid Tower | Mid-Tower | Micro ATX | Mid-Tower | not stated | Mini-Tower | Mid Tower | Mid Tower | Mid Tower |
| Side Panel | Tempered Glass | Tempered Glass | Tempered Glass | not stated | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | Curved Tempered Glass | Tempered Glass | 4mm Tempered Glass | Tempered Glass | Tempered Glass |
| Included Fans | 4x 140mm | 2x 120mm | not stated | not stated | not stated | not stated | not stated | 6x Fixed RGB | 4x 120mm ARGB | not stated | not stated | 1 x 120mm | 2x 140mm PWM, 1x 120mm PWM | 6x PWM ARGB | 2x 140 mm Aspect PWM |
| Radiator Support | 420mm | 120mm | 240mm | 480 mm | 420 mm | 280 mm front, 240 mm top, 120 mm rear | not stated | 240mm | 280mm | not stated | Up to 280mm | not stated | not stated | 280mm | 360 mm |
| Max GPU Length | 450mm | not stated | 370mm | 530 mm | not stated | not stated | not stated | 305mm | 330mm | not stated | Up to 330mm | not stated | not stated | not stated | 355 mm |
| Tower Size | Mid-Tower | not stated | not stated | Full-Tower | Mid-Tower | not stated | Mid-Tower | Mid-Tower | not stated | Mid-Tower | not stated | Mini-Tower | Mid-Tower | Mid-Tower | Mid-Tower |
| Fan Size | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 140mm | not stated | 140mm |
| Use | Gaming | not stated | Gaming | Gaming | not stated | not stated | Gaming | not stated | not stated | Gaming | not stated | Gaming | not stated | Gaming | Gaming |
| Lighting | RGB | not stated | not stated | not stated | not stated | RGB | RGB | RGB | ARGB | ARGB | not stated | ARGB | not stated | ARGB | not stated |
| Connectivity | not stated | not stated | USB 3.0 | not stated | not stated | not stated | Type-C | USB 3.0 | not stated | not stated | not stated | not stated | not stated | USB 3.0 | Type-C |
| Compatible Device | Radiator, Graphics Card | not stated | not stated | Radiator | not stated | not stated | not stated | Radiator | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Dimensions | 22.2 × 9.8 × 23.3 inches | 10.4 × 16.3 × 9.06 inches | 8.07 × 15.9 × 19.4 inches | 24.4 × 9.25 × 23.4 inches | 21.3 × 9.45 × 18.7 inches | 18.6 × 8.46 × 17.9 inches | 17.7 × 8.74 × 18.4 inches | 14.6 × 8.3 × 18.9 inches | 15.9 × 8.27 × 16.7 inches | 29.2 × 29.2 × 11.6 inches | 12.1 × 7.48 × 16.4 inches | 7.87 × 15.7 × 15.7 inches | 22 × 22 × 12 inches | 15.8 × 8.07 × 19 inches | 17.6 × 8.46 × 18.5 inches |
| Weight | 39.7 pounds | 13.9 pounds | 11 pounds | 44.1 pounds | 23.1 pounds | 19.2 pounds | 20.9 pounds | 11.9 pounds | 13.2 pounds | 15.5 pounds | 2.2 pounds | 6.39 pounds | 26.5 pounds | 14.6 pounds | 20.9 pounds |
| Size | GX601|Black | not stated | large | not stated | mid | ATX | ATX | X3 MESH | Air 100 Black | Mid-tower Case | not stated | MATX | not stated | 18.98" x 15.75" x 8.07" | ATX |
| Color | Helios GX601|Black | LD03 | Black | Black | Black TG Light | RGB Orange Core Tempered Glass Clear Tint | RGB Black - Light tint | X3-Black | Black | LANCOOL 205 MESH RGB - ATX - Black | Black | DP31 | Black | Black | Charcoal Black TG Dark |
| Model | 90DC0020-B39000 | SST-LD03B | BG01893 | AI-XL-PRO-LITE | FD-C-MES2A-03 | 7340172703020 | FD-C-TOR1C-02 | X3 MESH | AIR 100 ARGB | G99OE764X00 | Z5i | 0-761345-80038-9 | LAN2MPX.50 | NN8 | FD-C-NOR1C-02 |
Is a Tempered Glass Side Panel Worth It?
A tempered glass side panel provides a direct view of your internal hardware, lighting, and cooling setups. Specifications across these 15 models show glass implementations ranging from standard 4mm or 5mm flat sheets to hinged swing-out magnetic doors that allow quick internal access. Several designs use clear, light, or dark tints to adjust interior visibility. Because solid glass adds mass, chassis weights reach up to 44 pounds on large full-tower enclosures.
Worth it if
- You want continuous visual monitoring of your internal components, RGB lighting, or cooling setups.
- You want quick interior access through a hinged or swing-out magnetic door.
Skip it if
- You prioritize an ultra-lightweight desktop setup and want to avoid cases weighing 20 to 44 pounds.
- You prefer solid side panels that completely conceal internal cabling and hardware.
If you also compare kitchen appliances by material build, you can review every blender with glass jar by motor wattage and container volume.
How We Picked These Cases
To select 15 PC cases for this guide, we evaluated published specifications from retail listings. A case qualifies when its title or feature list specifies a tempered glass side panel. All details come directly from published specifications and feature lists rather than physical inspections. We examine key parameters including motherboard form factors from Micro-ATX to E-ATX, exterior dimensions, and cooling compatibility. Only one variant from each product family is included.
Cases on this page are ordered with products in stock first. We compare specifications such as included fan counts, radiator support, and front connectivity to help you assess your build requirements. Stock availability updates daily on the page.
How to Choose a Tempered Glass Case
-
Check Radiator Size and Placement
Verify your liquid cooling dimensions before buying an enclosure. Liquid coolers require specific bracket mounting space at the front or top of the chassis. Compact builds often cap support at 240mm coolers, while models like the NZXT H5 Flow RGB mid-tower accommodate up to 280mm front radiators. If you use a triple-fan 360mm setup, inspect the specifications for dedicated top mounts to prevent the radiator from colliding with tall motherboard heatsinks or system memory. Matching your cooler size directly to the chassis specification prevents assembly clearance issues.
-
Evaluate Front Panel USB Ports
Examine the connectivity ports built into the front or top chassis panel. Standard enclosures often include USB 3.0 Type-A ports, which suit legacy flash drives and basic desktop peripherals. However, modern external drives and high-speed devices benefit from a dedicated front USB Type-C port, available on options such as the NZXT H510. Ensure your chosen motherboard has the corresponding internal header to power these external ports. Checking your motherboard header specs against the chassis port specifications guarantees you can plug modern devices into the front of your computer without adapters.
-
Count Included Cooling Fans
Review how many fans come pre-installed in the chassis out of the box. Some enclosures include no fans or only a single exhaust unit, requiring you to purchase intake fans separately to establish proper airflow. Other options, like the MUSETEX ATX Mid-Tower with Magnetic Glass Door, arrive with six pre-installed PWM fans to fully populate every mounting bracket right away. Look at whether the installed units are standard 120mm fans or larger 140mm units. Factoring in included fan counts simplifies your component list and speeds up the initial build process.
-
Verify Graphics Card Clearance
Measure your graphics card length against the published maximum GPU clearance of the case. High-end multi-fan graphics cards often measure well over 300 mm, leaving little room in compact enclosures once front fans or radiators are mounted. The Fractal Design North ATX Mid-Tower Case specifies 355mm GPU clearance, offering reliable space for long cards without obstructing intake air paths. Always deduct the thickness of any front-mounted liquid radiator from the published GPU clearance spec. Checking this measurement ensures your graphics card seats cleanly into the primary PCIe slot without physical interference.
-
Inspect Motherboard Tray Cutouts
Look closely at the motherboard tray cutouts if you plan to install a modern hidden-connector motherboard. Specialized boards place power, fan, and data headers on the reverse side of the PCB to keep cables completely out of sight behind the tempered glass panel. Cases such as the Phanteks XT View Matrix Mid-Tower Case feature tailored cutouts specifically designed for these rear-connector motherboards. If you build with a conventional motherboard, standard cable routing grommets suffice. Checking this specification ensures your tray provides the precise cutouts necessary to plug in rear-facing cables.
-
Review Chassis Dimensions and Weight
Consider the exterior dimensions and total weight before selecting where to place your build. Standard mid-towers usually weigh between 10 and 20 pounds empty, making them manageable for normal desks. In contrast, massive enclosures like the Anidees AI Crystal XL Full Tower weigh over 44 pounds before adding components, liquid, and power supplies. You need a sturdy desk surface or floor space that handles heavy loads and stands clear of foot traffic. Measuring your desk area against the chassis length and height ensures your setup fits comfortably without overcrowding.
Frequently asked questions
Which tempered glass case supports the largest motherboards?
The Anidees AI Crystal XL Full Tower is the largest option on this list. It supports E-ATX motherboards and features a 23.4-inch height. This Full-Tower chassis provides massive component clearance for oversized builds and extreme custom liquid cooling loops.
What is the lightest PC case with tempered glass?
The G.SKILL Z5i Mini-ITX Tempered Glass Case is the lightest at 2.2 pounds. It measures 16.4 inches in height and is designed for compact Mini-ITX builds. This chassis allows for large GPUs without sacrificing a small footprint.
Does the ASUS ROG Strix Helios include RGB lighting?
Yes, the ASUS ROG Strix Helios RGB Mid-Tower Case includes RGB lighting. It is a 23.3-inch high E-ATX mid-tower designed for gaming. The case weighs 39.7 pounds and offers extensive GPU mounting options within its tempered glass chassis.
Which cases support ATX motherboards with tempered glass?
Several models support standard ATX motherboards. The Fractal Design Pop Air RGB ATX Case, Fractal Design Torrent Compact ATX Mid-Tower, and Montech X3 Mesh ATX Mid-Tower all accept ATX boards. The Antec Dark Phantom DP31 Mini-Tower also lists ATX support alongside its tempered glass panel.
Are there tempered glass cases with USB Type-C ports?
Yes, two models offer USB Type-C connectivity. The Fractal Design Torrent Compact ATX Mid-Tower includes a Type-C port for high-speed data transfer. The Fractal Design North ATX Mid-Tower also provides a Type-C connection alongside its tempered glass side panel.
Which tempered glass case is best for Micro-ATX builds?
The Montech AIR 100 ARGB Micro-ATX Case is designed specifically for Micro-ATX builds. It features a tempered glass side panel and includes ARGB lighting. At 16.7 inches tall, it fits well in tight spaces while maintaining airflow and visibility.
What is the tallest tempered glass case in this list?
The ASUS ROG Strix Helios RGB Mid-Tower Case is the tallest at 23.3 inches. It is a 9.8-inch wide E-ATX mid-tower. Its height accommodates large graphics cards and supports extensive expansion capabilities for demanding gaming systems.
Does the Silverstone LD03B have a tempered glass side?
Yes, the Silverstone LD03B Mini-ITX Case features a tempered glass side panel. It is a vertical build chassis with a 10.4-inch length. This design suits users who need a compact footprint with full visibility of their Mini-ITX components.














