9 Best PC Cases with 200mm, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing a PC case with 200mm fan capability provides your system with extensive intake airflow and quiet cooling. We compared 9 products strictly using the specifications published on their official listings.
The Noctua 200mm PWM Case Fan earns our top ranking because its 30mm depth and multi-bracket mount support deliver quiet, regulated cooling inside compatible chassis locations. This comparison helps you decide which enclosure dimensions, motherboard form factor, and radiator mounting clearances fit your specific desktop setup.
Quick picks
The best fit for you
- You need a quiet 200mm PWM cooling fan Noctua 200mm PWM Case Fan This fan features 200mm sizing and a 30mm depth for cases with multi-bracket fan mounts.
- You plan an extreme build with E-ATX support Cooler Master HAF 700 EVO E-ATX Full-Tower The full-tower chassis supports E-ATX motherboards, 200mm fans, and features front panel Type-C connectivity.
- You want a full tower supporting four 200mm fans Corsair 9000D RGB Airflow Super Full-Tower Case This super full-tower chassis accommodates four 200mm fans and provides RGB lighting for extensive multi-radiator cooling setups.
- You want a compact Mini-ITX small form factor SSUPD Meshroom S V2 SFF Mini-ITX Case This small form factor chassis features a 15-liter volume, Mini-ITX motherboard support, and 280mm radiator clearance.
Our 9 picks
Noctua 200mm PWM Case Fan
Best for: silent cooling in compatible 200mm mounts
- Fan Size
- 200mm (what this guide is about)
- Dimensions
- 7.87 × 7.87 × 1.18 inches
- Weight
- 11.2 ounces
This 200mm standalone case fan delivers low-noise airflow with a maximum acoustic rating of 18.1 dB(A). It operates across a 350 to 800 RPM range using a 4-pin PWM motherboard header for automatic speed regulation. With 154x154, 170x170, and 110x180mm mounting spacing, it fits cases built for oversized intake cooling. You get swappable anti-vibration pads in six colors for subtle chassis customization.
Pros
- Maximum noise output rated at 18.1 dB(A)
- Wide mounting compatibility with 154x154, 170x170, and 110x180mm hole spacing
- PWM speed regulation between 350 and 800 RPM
- Swappable anti-vibration pads included in six colors
Cons
- Frame depth of 30mm exceeds standard 25mm fan clearance
- Maximum rotational speed capped at 800 RPM
- Lacks built-in LED or RGB lighting
Good fit if
- You need a quiet 200mm fan operating at or below 18.1 dB(A).
- You have chassis mounts matching 154x154, 170x170, or 110x180mm spacing.
- You want automatic motherboard speed regulation via a 4-pin PWM header.
Skip if
- You require a slim 25mm fan to fit tight clearance spaces.
- You want fan speeds higher than 800 RPM for maximum static pressure.
- You want integrated RGB lighting effects.
Verdict: Noctua 200mm Chromax PWM Fan provides quiet, regulated airflow for cases designed with multi-bracket 200mm mounts. Its 30mm depth requires sufficient clearance inside your chassis.
Cooler Master HAF 700 EVO E-ATX Full-Tower
Best for: massive E-ATX builds needing 200mm fan cooling
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Included Fans
- 200mm Sickleflow Fans
- Connectivity
- Type-C
- Dimensions
- 26.2 × 11.5 × 24.6 inches
The Cooler Master HAF 700 EVO is a full-tower E-ATX PC case built around 200mm fan cooling. It features an integrated IRIS LCD display, Type-C connectivity, and tool-less installation options. At over 26 inches deep and weighing 55.33 pounds, this chassis gives you massive interior volume for large components and extensive water cooling setups. It suits you if you want maximum airflow potential and need space for an oversized E-ATX build.
Pros
- Supports 200mm cooling fans and large E-ATX motherboards
- Integrated IRIS customizable LCD screen on the front panel
- Tool-less technology for component installation
- Front I/O includes USB Type-C connectivity
Cons
- Heavy chassis weighing 55.33 pounds before component installation
- Large footprint requiring over 26 inches of depth and 24 inches of height
- Color choice is limited to black
Good fit if
- You need an E-ATX full-tower chassis designed for 200mm cooling setups.
- You want an integrated front LCD screen for system information.
- You build large-scale systems requiring extensive liquid cooling hardware.
Skip if
- You have limited desk or floor clearance for a chassis over 26 inches deep.
- You require a lightweight case that is easy to lift and transport.
Verdict: Cooler Master HAF 700 EVO Full-Tower Case delivers expansive clearance for 200mm fans, large motherboards, and complex cooling configurations. Its tool-less hardware support and built-in LCD display provide dedicated utility for extreme builds.
Corsair 9000D RGB Airflow Super Full-Tower Case
Best for: extreme multi-radiator and 200mm fan configurations
- Fan Size
- 120mm, 140mm, 200mm (what this guide is about)
- Case Type
- Super Full-Tower
- Radiator Support
- 480mm
- Lighting
- RGB
- Dimensions
- 27.5 × 12.1 × 27.5 inches
- Weight
- 64.2 pounds
View on Amazon: Corsair 9000D RGB Airflow Super Full-Tower Case
The Corsair 9000D RGB Airflow is a super full-tower case built for massive cooling setups. It accommodates up to four 200mm fans, or up to 18 120mm fans using an adjustable InfiniRail system. It also supports radiators up to 480mm in the front and roof. At over 27 inches tall and roughly 64 pounds, this chassis suits you if you need maximum hardware capacity for a large custom liquid-cooling loop.
Pros
- Supports up to four 200mm fans or up to 18 120mm fans
- Fits radiators up to 480mm in the front and roof
- Includes iCUE LINK System Hub managing up to 13 additional devices
- InfiniRail sliding mount system allows flexible fan placement
Cons
- Substantial footprint at over 27 inches high and wide
- Weighs over 64 pounds empty
Good fit if
- You plan to run up to four 200mm fans or dual 480mm radiators.
- You want an included iCUE LINK hub to control multiple internal components.
- You have dedicated space for a 27-inch tall chassis.
Skip if
- You need a compact or lightweight case that is easy to move.
- You only plan to install a standard air cooler or single AIO liquid cooler.
Verdict: Corsair 9000D RGB Airflow Full-Tower offers massive space for four 200mm fans and extensive liquid-cooling hardware. Its extreme size and weight require significant room, making it suited for complex multi-radiator systems.
SSUPD Meshroom S V2 SFF Mini-ITX Case
Best for: compact builds with large graphics cards
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- ITX, MATX, ATX
- Case Type
- Mini-ITX, SFF
- Side Panel
- Mesh
- Radiator Support
- 240mm, 280mm
- Max GPU Length
- 353mm
The SSUPD Meshroom S V2 is a 15-liter small form factor case designed around full mesh panels for open airflow. It supports Mini-ITX motherboards out of the box, with flexibility for Micro-ATX and ATX boards using an additional cable. You can fit graphics cards up to four slots wide, power supplies up to 170mm, and front radiators up to 280mm. It suits you if you want high-end hardware inside a compact footprint.
Pros
- Compact 15-liter volume with tool-less full-mesh exterior panels
- Four-slot GPU support accommodating cards up to 152mm wide
- Front bracket mounts 240mm or 280mm liquid cooling radiators
- Accepts SFX, SFX-L, and ATX power supplies up to 170mm
Cons
- CPU air cooler clearance capped at 74mm
- Micro-ATX and ATX motherboard setups require an extra-length PCIe riser cable
- Fitting 353mm GPU lengths requires purchasing optional aluminum case feet
Good fit if
- You want a compact 15-liter footprint with all-mesh breathable side panels.
- You plan to run a 4-slot graphics card alongside a 280mm front radiator.
- You want the option to reuse a full-sized ATX power supply up to 170mm.
Skip if
- You plan to use a tower CPU air cooler taller than 74mm.
- You want to mount an ATX motherboard without buying additional PCIe cables.
Verdict: SSUPD Meshroom S V2 Mini-ITX Case delivers 15 liters of volume with full mesh ventilation, four-slot graphics clearance, and 280mm radiator mounting. It gives you room for full-sized desktop hardware within a compact footprint.
Thermaltake View 290 Curved Glass Mid-Tower
Best for: hidden-connector builds with long graphics cards
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- mATX, ATX
- Case Type
- Mid Tower
- Included Fans
- 3x 120mm ARGB Lite
- Radiator Support
- 360mm
- Max GPU Length
- 450mm
The Thermaltake View 290 is a mid-tower case featuring a curved tempered glass front panel and 200mm fan class support. Inside, you get room for radiators up to 360mm, graphics cards up to 450mm, and CPU air coolers up to 180mm. It includes three 120mm ARGB Lite fans preinstalled and supports hidden-connector motherboards, making it a functional option if you want a clean view of your internal hardware.
Pros
- Supports graphics cards up to 450mm and CPU coolers up to 180mm
- Compatible with hidden-connector ATX and mATX motherboards
- Accommodates liquid cooling radiators up to 360mm
- Preinstalled with three 120mm ARGB Lite fans
Cons
- Includes 120mm fans instead of preinstalled 200mm fans
- Vertical graphics card setup requires a separate riser cable
Good fit if
- You build with ASUS BTF, MSI Project Zero, or Gigabyte Project Stealth motherboards.
- You need clearance for extra-long graphics cards up to 450mm.
- You want a curved tempered glass front panel to display components.
Skip if
- You want 200mm fans preinstalled in the chassis out of the box.
- You expect an included riser cable for vertical GPU mounting.
Verdict: Thermaltake View 290 Mid-Tower Case delivers generous 450mm GPU clearance and hidden-connector motherboard compatibility. It offers solid expansion room despite shipping with 120mm rather than 200mm fans.
Thermaltake View 390 Air Mid Tower
Best for: hidden-connector builds needing 200mm fan support
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- mATX, ATX
- Case Type
- Mid Tower
- Side Panel
- Curved Tempered Glass
- Included Fans
- 2x 120mm
- Radiator Support
- 360mm
Thermaltake View 390 Air is a mid-tower case designed for high-airflow builds with support for 200mm fans and up to eleven total fans. You get clearances for GPUs up to 420mm, radiators up to 360mm, and compatibility with hidden-connector motherboards. This chassis suits you if you want wide cooling options, a curved tempered glass side, and room for modern hardware without moving up to a full tower.
Pros
- Supports fans up to 200mm and fits up to 11 total fans
- Accommodates GPUs up to 420mm and radiators up to 360mm
- Supports ATX and mATX hidden-connector motherboards
- Rotatable PCIe slot tray allows horizontal or vertical GPU orientation
Cons
- Includes only two 120mm fans, with no 200mm fans preinstalled
- Vertical GPU setup requires a riser cable sold separately
- Maximum CPU air cooler height is limited to 160mm
Good fit if
- You want 200mm fan compatibility alongside space for up to eleven chassis fans.
- You plan to build with an ASUS BTF, MSI Project Zero, or Gigabyte Project Stealth motherboard.
- You need clearance for an extra-long graphics card up to 420mm.
Skip if
- You want 200mm fans preinstalled directly out of the box.
- You use a large CPU air cooler taller than 160mm.
Verdict: Thermaltake View 390 Air Mid Tower Case delivers broad cooling versatility and support for hidden-connector motherboards, though you must supply your own 200mm fans.
Cooler Master MasterFrame 500 Mesh Case
Best for: open-frame builds needing large front intake fans
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- Mini-ITX to E-ATX
- Included Fans
- 2x 200mm
- Radiator Support
- 360mm
- Dimensions
- 18.5 × 10.3 × 21.4 inches
- Weight
- 22 pounds
This open-frame ATX case features an aluminum exo-structure designed for flexible layouts. It comes with two pre-installed 200mm front intake fans to drive airflow directly into the chassis. Motherboard support spans from Mini-ITX up to large E-ATX boards measuring 305 by 330mm. You can install up to seven fans and 360mm radiators. It suits you if you want modular panels and high out-of-the-box airflow for custom component configurations.
Pros
- Includes two pre-installed 200mm front intake fans
- Supports Mini-ITX up to E-ATX motherboards up to 305 x 330mm
- Accommodates up to seven fans and 360mm radiators
- Open-frame aluminum exo-structure with interchangeable panels
Cons
- Heavy chassis weighing 22 pounds empty
- Large footprint measuring 21.4 inches tall and 10.3 inches wide
Good fit if
- You need pre-installed 200mm intake fans for high airflow.
- You build with an E-ATX motherboard up to 305 x 330mm.
- You want an open-frame chassis with modular, interchangeable panels.
Skip if
- You prefer a lightweight case under 20 pounds.
- You need a compact chassis for limited desk space.
Verdict: Cooler Master MasterFrame 500 Mesh Case delivers strong airflow via pre-installed dual 200mm fans and provides modular mounting flexibility for boards up to E-ATX.
GAMDIAS Apollo Mid-Tower with Dual 200mm ARGB Fans
Best for: builders wanting dual 200mm ARGB front fans
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- EATX, ATX, Micro-ATX, Mini-ITX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 2x 200mm ARGB
- Radiator Support
- Up to 360mm
View on Amazon: GAMDIAS Apollo Mid-Tower with Dual 200mm ARGB Fans
This mid-tower gaming chassis includes two 200mm ARGB front fans and a tempered glass side panel to showcase your components. It accommodates motherboards ranging from Mini-ITX up to E-ATX, graphics cards up to 350mm long, and CPU coolers up to 168mm tall. You can install up to a 360mm radiator on either the front or top mounts, making it suitable if you prioritize large fan airflow and synchronized lighting in a standard layout.
Pros
- Includes two 200mm front ARGB fans
- Supports up to 360mm radiators at both front and top positions
- Accommodates GPUs up to 350mm and CPU coolers up to 168mm
- Broad motherboard compatibility spanning Mini-ITX to E-ATX
Cons
- Front I/O offers USB 3.0 and USB 2.0 without a USB-C port
- Rear exhaust mount is restricted to a single 120mm fan
Good fit if
- You want dual 200mm ARGB fans pre-installed at the front intake.
- You need clearance for a graphics card up to 350mm long.
- You plan to mount a 240mm or 360mm radiator at the top or front.
Skip if
- You require a native USB Type-C port on the front I/O panel.
- You plan to mount a 140mm exhaust fan at the rear.
Verdict: GAMDIAS Apollo Mid-Tower with Dual 200mm ARGB Fans delivers high-volume front intake alongside integrated lighting and broad hardware clearance. It accommodates large graphics cards and dual radiator locations within a standard mid-tower footprint.
Cooler Master HAF 500 ATX Mid-Tower Case
Best for: ATX setups needing targeted GPU airflow
- Fan Size
- 200mm (what this guide is about)
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Connectivity
- Type-C
- Dimensions
- 23.4 × 12.2 × 23 inches
The Cooler Master HAF 500 ATX Mid-Tower Case is an airflow-focused enclosure equipped with two 200mm front ARGB intake fans. You get a dedicated 120mm rotatable fan on the hard drive cage aimed directly at your graphics card, a front mesh panel, and a USB 3.2 Gen 2 Type-C port. This mid-tower suits you if you want high-volume front intake cooling with tool-free tempered glass side access for your ATX build.
Pros
- Dual 200mm ARGB front intake fans
- Dedicated 120mm rotatable fan for GPU cooling
- Tool-free, pin-mounted tempered glass side panel
- Front I/O panel with USB 3.2 Gen 2 Type-C
Cons
- Motherboard support limited to standard ATX form factors
- Heavy chassis weight at over 24 pounds
Good fit if
- You want dual 200mm intake fans combined with targeted GPU cooling.
- You need a front-panel USB 3.2 Gen 2 Type-C port.
- You prefer a tool-free tempered glass panel design for quick access.
Skip if
- You need support for larger E-ATX motherboards.
- You require a lightweight enclosure that is easy to move.
Verdict: Cooler Master HAF 500 ATX Mid-Tower Case combines dual 200mm front intake fans with an adjustable internal fan to supply direct GPU cooling. It offers solid thermal specs, modern Type-C connectivity, and tool-free panel access for ATX builds.
Specifications side by side
| Spec | Noctua 200mm PWM Case Fan | Cooler Master HAF 700 EVO E-ATX Full-Tower | Corsair 9000D RGB Airflow Super Full-Tower Case | SSUPD Meshroom S V2 SFF Mini-ITX Case | Thermaltake View 290 Curved Glass Mid-Tower | Thermaltake View 390 Air Mid Tower | Cooler Master MasterFrame 500 Mesh Case | GAMDIAS Apollo Mid-Tower with Dual 200mm ARGB Fans | Cooler Master HAF 500 ATX Mid-Tower Case |
|---|---|---|---|---|---|---|---|---|---|
| Motherboard Support | not specified | E-ATX | not specified | ITX, MATX, ATX | mATX, ATX | mATX, ATX | Mini-ITX to E-ATX | EATX, ATX, Micro-ATX, Mini-ITX | ATX |
| Case Type | not specified | Full-Tower | Super Full-Tower | Mini-ITX, SFF | Mid Tower | Mid Tower | not specified | Mid Tower | Mid-Tower |
| Side Panel | not specified | not specified | not specified | Mesh | not specified | Curved Tempered Glass | not specified | Tempered Glass | Tempered Glass |
| Included Fans | not specified | 200mm Sickleflow Fans | not specified | not specified | 3x 120mm ARGB Lite | 2x 120mm | 2x 200mm | 2x 200mm ARGB | not specified |
| Radiator Support | not specified | not specified | 480mm | 240mm, 280mm | 360mm | 360mm | 360mm | Up to 360mm | not specified |
| Max GPU Length | not specified | not specified | not specified | 353mm | 450mm | 420mm | not specified | 350mm | not specified |
| Case Volume | not specified | not specified | not specified | 15L | not specified | not specified | not specified | not specified | not specified |
| Tower Size | not specified | not specified | Full-Tower | Small Form Factor | Mid-Tower | Mid-Tower | not specified | Mid-Tower | Mid-Tower |
| Fan Size | 200mm | 200mm | 120mm, 140mm, 200mm | 200mm | 200mm | 200mm | 200mm | 200mm | 200mm |
| Use | not specified | not specified | not specified | Gaming | not specified | not specified | not specified | Gaming | not specified |
| Lighting | not specified | not specified | RGB | not specified | not specified | not specified | not specified | ARGB | not specified |
| Connectivity | not specified | Type-C | not specified | Type-C | not specified | not specified | not specified | not specified | Type-C |
| Compatible Device | not specified | not specified | not specified | not specified | Radiator | Radiator | not specified | not specified | not specified |
| Dimensions | 7.87 × 7.87 × 1.18 inches | 26.2 × 11.5 × 24.6 inches | 27.5 × 12.1 × 27.5 inches | 9.72 × 6.57 × 14.3 inches | not specified | 19.1 × 11.3 × 19.8 inches | 18.5 × 10.3 × 21.4 inches | 20.4 × 11.2 × 18.1 inches | 23.4 × 12.2 × 23 inches |
| Weight | 11.2 ounces | 55.3 pounds | 64.2 pounds | 6.83 pounds | 21.1 pounds | 28.5 pounds | 22 pounds | 13.2 pounds | 24.4 pounds |
| Size | 15 Count (Pack of 114) | E-ATX Full-Tower | not specified | not specified | not specified | 19.8" x 11.3" x 19.1" | Large | not specified | ATX Mid-Tower |
| Color | Black | Black | White | PCIE 5.0 200mm(Black) | White | Air White | Black | GD-APOLLO E2 Elite | White |
| Model | NF-A20PWMchromaxblackswap | H700E-IGNN-S00 | CC-9011274-WW | Meshroom S PCI5 BK | CA-11G-00M6WN-00 | CA-11F-00M6WN-00 | MF500M-KHNN-S00 | APOLLO E2 ELITE | H500-WGNN-S00 |
Is a 200mm fan setup worth it?
Accommodating 200mm fans dictates case dimensions and internal layout. Chassis engineered for these fans—such as mid-towers and full-towers spanning over 11 to 12 inches wide—accept high-diameter front intakes or multi-bracket configurations. Some models include pre-installed dual 200mm fans or accommodate up to four units alongside large radiators. However, mounting these large fans or thick 30mm frames requires verifying hardware clearances, as some enclosures arrive with 120mm fans installed instead or require you to provide your own 200mm units.
Worth it if
- You want chassis setups with dual pre-installed 200mm front intake fans or mounts for up to four 200mm units.
- You have an enclosure with multi-bracket support and at least 30mm of depth clearance for aftermarket fans.
Skip it if
- You prefer using standard 120mm stock cooling fans already supplied with the case.
- You build in compact enclosures that cannot fit wide chassis profiles exceeding 11 inches.
How We Chose These Picks
You will find 9 selections compiled by scanning published specifications and titles for 200mm fan support. Every product matches published dimensions, mount clearances, or included fan hardware for this size category. You see only one model per product family to prevent duplicate designs. No physical testing took place, and all details come directly from official listing data.
Products in stock appear first so you find available hardware immediately. The page refreshes daily with live stock information, keeping the focus on technical specifications. You can evaluate form factors, motherboard support, and fan mount options directly through these confirmed numbers.
Choosing the Best 200mm PC Case
-
Check Radiator Support Dimensions
Liquid cooling setups depend directly on listed radiator support dimensions. If you plan to install an all-in-one liquid cooler alongside large air intake, check whether the chassis accommodates 280mm or 360mm radiators. Compact enclosures like the SSUPD Meshroom S V2 support up to a 280mm radiator within a 15-liter volume. Larger cases often accommodate 360mm radiators across multiple brackets. Always match your liquid cooler size to the specified radiator positions so your cooling hardware fits securely.
-
Confirm Included Fan Configurations
Not every case with 200mm fan support includes 200mm fans in the package. Some models provide front intake mounts designed for 200mm hardware but leave the purchase of the actual fans to you. The Thermaltake View 390 Air features dedicated 200mm fan mounting capability, yet you must supply your own 200mm fans. Review the fan specifications to see if intake fans are pre-installed or if you need to buy standalone units to complete your cooling configuration.
-
Verify Fan Frame Depth
Fan thickness affects how easily a 200mm fan fits behind front panels or brackets. While standard PC case fans often measure 25mm thick, larger diameter models can exceed that depth. The Noctua 200mm PWM Case Fan features a 30mm depth, which measures approximately 1.18 inches. You need to verify that your chosen case bracket provides sufficient clearance between the outer panel and the internal frame so a 30mm fan does not press against mounting rails or glass.
-
Review Front Panel Connectivity
Modern peripheral setups benefit from fast external connections on the case exterior. Check the connectivity specifications for front-panel Type-C support if you regularly transfer files or connect modern external devices. The Cooler Master HAF 500 ATX Mid-Tower Case includes built-in Type-C connectivity directly on the chassis interface. Choosing a model with Type-C ensures convenient access without reaching behind the computer, provided your motherboard header layout matches the required connector standard.
-
Inspect Lighting Hardware Options
Illumination specifications determine how your intake setup looks through a transparent side panel. If you prefer dynamic color effects, look for cases specifying ARGB lighting on their included fans. The GAMDIAS Apollo Mid-Tower includes dual 200mm ARGB fans paired with a tempered glass side panel to display illumination across internal components. If you prefer an unlit, functional build, verify whether the fans feature LEDs or stick to plain frames without lighting connectors to streamline wiring.
-
Evaluate Chassis Weight Specifications
Enclosures designed for multiple large fans and complex cooling can be heavy and bulky. Check the published weight and external dimensions before planning where the system will sit. The Corsair 9000D RGB Airflow Super Full-Tower Case weighs 64.15 pounds empty and measures over 27 inches tall and long. Full-tower configurations of this scale require sturdy desk surfaces or dedicated floor space, whereas mid-towers weighing under 25 pounds offer significantly simpler handling and moving.
Frequently asked questions
Do all PC cases support 200mm fans?
No, 200mm fans require specific mounting brackets and wide chassis dimensions. Cases like the Corsair 9000D span over 12 inches wide to fit up to four 200mm fans. Standard enclosures often only fit 120mm or 140mm units unless designed with broad front brackets like the GAMDIAS Apollo. Always verify official fan mounting specifications before purchasing an aftermarket 200mm fan.
Can you install 200mm fans in a Mini-ITX case?
Yes, select compact enclosures support 200mm hardware configurations. Small form factor models like the SSUPD Meshroom S V2 offer 200mm compatibility within a 15-liter volume. You can mount Mini-ITX motherboards alongside full-sized graphics cards, though internal clearances remain tight compared to full-tower options. Confirm your component layout and cable pathways carefully when building inside smaller 200mm-compatible frames.
What thickness clearance do 200mm case fans require?
Most 200mm case fans require at least 30mm of depth clearance. For example, the Noctua 200mm PWM Case Fan measures 1.18 inches thick, whereas standard PC cooling fans measure 25mm deep. You must verify that your chassis front panel, drive cage, or interior bracket provides enough clearance for this extra 5mm profile so the blades rotate freely without obstruction.
Which PC cases come with 200mm fans already installed?
Several models include pre-installed 200mm fans directly out of the box. The Cooler Master MasterFrame 500 Mesh and Cooler Master HAF 500 both feature dual 200mm front fans. The GAMDIAS Apollo also arrives with dual 200mm ARGB intake fans. Conversely, cases like the Thermaltake View 390 Air support 200mm fan sizes but require you to purchase and mount them separately.
Do PC cases with 200mm fans support liquid cooling radiators?
Yes, many cases with 200mm fan mounts also support liquid cooling radiators. The Thermaltake View 290 and View 390 Air both accommodate 360mm radiators. The compact SSUPD Meshroom S V2 fits a 280mm radiator, while the Corsair 9000D handles extreme multi-radiator layouts alongside four 200mm fans. Verify that your chosen radiator placement does not block or conflict with large fan locations.
How much does a full-tower PC case with 200mm fans weigh?
Full-tower cases designed for 200mm fan setups are heavy and require solid desktop support. The Corsair 9000D Super Full-Tower weighs 64.15 pounds unloaded, while the Cooler Master HAF 700 EVO E-ATX weighs 55.33 pounds. Their broad dimensions and heavy structural frames allow for extensive cooling hardware. Plan your workspace and assembly area around these substantial chassis weights.