Looking Beyond the Bgears b-Voguish E-ATX Tempered Glass? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you need different cooling features or chassis dimensions, exploring bgears b voguish gaming PC case alternatives is a practical step for your next build. The Bgears b-Voguish handles large components well, offering support for E-ATX motherboards, graphics cards up to 370mm long, and CPU coolers up to 160mm tall behind a hinged 5mm tempered glass panel. However, this chassis does not include cooling fans, meaning you must supply your own hardware to establish airflow. You might also prefer a different exterior size, pre-installed ARGB lighting, or an alternative brand with distinct front-panel designs.
The 6 alternatives featured here were chosen because their specifications directly overlap with the original b-Voguish. You will find models that match its broad motherboard compatibility, USB 3.0 connectivity, and tempered glass side panels. At the same time, these cases give you alternative hardware specs, ranging from compact Micro-ATX frames to high-airflow enclosures equipped with factory fans or expanded radiator mounts.
Our top pick: Bgears b-Voguish E-ATX Tempered Glass Case.
How Alternative PC Cases Compare
ARrase E-ATX Mid-Tower Case
ARrase matches the E-ATX motherboard support, tempered glass side panel, and USB 3.0 connectivity of the b-Voguish. Like the Bgears chassis, it targets setups where you install your own fans. At 11.5 pounds, it weighs slightly more than the 11-pound b-Voguish. However, the ARrase is classified specifically as a mid-tower form factor rather than a large tower, while the b-Voguish details specific clearance metrics like 370mm GPU length, 160mm CPU cooler height, dual 240mm radiator mounts, and a 5mm hinged swing door. Choose the ARrase if you want a dedicated mid-tower layout for your E-ATX board with custom fans.
Anidees AI Crystal XL Full Tower
The Anidees AI Crystal XL offers massive expansions over the Bgears b-Voguish. It supports HPTX alongside E-ATX motherboards, dual 480mm radiators compared to the b-Voguish's 240mm maximum, and 530mm graphics cards versus 370mm. It also provides twelve drive bays and interchangeable front panels. In exchange, the Anidees requires significantly more desk space, measuring 23.4 inches tall and 24.4 inches long, while weighing 44.1 pounds compared to the 11-pound Bgears frame. You also lose the specific 5mm hinged swing-door mechanism noted on the b-Voguish. Pick the Anidees if you build large liquid-cooled rigs needing extreme radiator room and multi-drive storage capacity.
MUSETEX ATX Mid-Tower with Magnetic Glass Door
The MUSETEX mid-tower comes equipped with six PWM fans and ARGB lighting out of the box, whereas the Bgears b-Voguish includes no cooling fans at all. Both cases provide quick interior access using hinged tempered glass side doors and share similar exterior footprints around 19 inches tall. However, the MUSETEX limits motherboard compatibility to ATX, dropping the larger E-ATX form factor supported by the b-Voguish. It also does not list the b-Voguish's 370mm GPU or 160mm CPU cooler clearance figures. Choose the MUSETEX if you want a complete cooling configuration with pre-installed fans for an ATX gaming motherboard without buying separate fans.
Lian Li LANCOOL III E-ATX Mid-Tower Case
The Lian Li LANCOOL III improves on airflow and modularity, providing factory-installed cooling fans, integrated RGB lighting, and hinged glass panels on a heavy-duty steel chassis. Like the Bgears b-Voguish, it accommodates E-ATX motherboards and large graphics cards. However, the LANCOOL III is significantly heavier and bulkier, weighing 31.1 pounds compared to the 11-pound b-Voguish, and measures nearly 26 inches deep. While the b-Voguish gives you clear defined clearance figures like 240mm radiators and a 160mm CPU cooler height in a lighter frame, the LANCOOL III is best if you need a heavy-duty chassis with integrated RGB lighting and out-of-the-box airflow.
MOROVOL Mid-Tower Mesh ATX Case
The MOROVOL Mid-Tower includes four RGB fans and a mesh front panel for immediate airflow, unlike the fanless Bgears b-Voguish. It also features a more compact footprint, measuring 16.7 inches high and 14.6 inches long. However, it sacrifices substantial component space. Motherboard support tops out at standard ATX, lacking the E-ATX capability of the b-Voguish. Graphics card clearance drops from 370mm on the Bgears down to 300mm, and CPU cooler clearance reduces from 160mm to 155mm. You also give up the 5mm hinged swing-door mechanism. Pick the MOROVOL if you run a standard ATX build and want included cooling fans in a smaller frame.
MOROVOL Micro-ATX Panoramic Glass PC Case
The MOROVOL Micro-ATX Panoramic Glass Case features a three-sided glass view and three included cooling fans, giving you panoramic internal visibility that exceeds the single glass panel on the Bgears b-Voguish. Its compact cube dimensions (12.4 inches high, 13.4 inches long) make it noticeably smaller on your desk than the 19.4-inch-tall b-Voguish. To gain this compact footprint, you forfeit both ATX and E-ATX motherboard compatibility, as this case only accommodates Micro-ATX motherboards. It also lacks the 240mm radiator mounts and 370mm GPU clearance specified for the b-Voguish. Choose it if you plan a compact, display-oriented Micro-ATX system with pre-installed fans.
Quick picks
Our 7 picks
Bgears b-Voguish E-ATX Tempered Glass Case
Best for: builders supplying their own cooling fans
- Motherboard Support
- E-ATX, ATX, Micro-ATX, mini-ITX
- Side Panel
- Tempered Glass
- Radiator Support
- 240mm
- Max GPU Length
- 370mm
- Use
- Gaming
- Connectivity
- USB 3.0
The Bgears b-Voguish is an E-ATX gaming chassis featuring a 5mm hinged swing-open tempered glass side panel. You get support for motherboards ranging from mini-ITX up to E-ATX, graphics cards up to 370mm long, and dual 240mm radiators on the top and front. It includes a removable magnetic dust filter and USB 3.0 connectivity. This case suits you if you plan to supply your own cooling setup.
Pros
- Fits large E-ATX motherboards and GPUs up to 370mm
- Hinged 5mm swing-open tempered glass side panel
- Supports dual 240mm radiators on the front and top
- Removable magnetic filter for easier dust management
Cons
- Does not include case fans
- Radiator mounting tops out at 240mm
- Maximum CPU cooler height is capped at 160mm
Good fit if
- You want to mount a large E-ATX board with a GPU up to 370mm long.
- You prefer selecting and installing your own cooling fans.
- You want quick interior access via a hinged swing-open glass panel.
Skip if
- You need pre-installed case fans right out of the box.
- You plan to install a 280mm or 360mm liquid cooling radiator.
- You use a tall air cooler exceeding 160mm in height.
Verdict: Bgears b-Voguish E-ATX Tempered Glass Case provides strong component clearance and easy hinged access for custom component builders. You will need to supply your own fans to complete the cooling setup.
ARrase E-ATX Mid-Tower Case
Best for: E-ATX builds using custom cooling fans
- Motherboard Support
- E-ATX/ATX/MATX/ITX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Use
- Gaming
- Connectivity
- USB 3.0
- Weight
- 11.5 pounds
The ARrase Mid-Tower is an alternative chassis supporting full E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards. You get a steel main structure paired with a tempered glass side panel to show your internal components. It features mounting space for up to six 120mm fans, including front and power supply compartment placements. Top I/O connectivity includes one USB 3.0 port, two legacy USB 1.1 ports, and dedicated HD audio jacks.
Pros
- Supports E-ATX, ATX, MATX, and ITX motherboard formats
- Tempered glass side panel for viewing internal components
- Mounting capacity for up to six 120mm cooling fans
- Solid steel front panel and chassis frame construction
Cons
- Cooling fans are not included with the chassis
- Secondary front I/O ports use USB 1.1 speeds
- No front-panel USB Type-C connectivity
Good fit if
- You need an E-ATX compatible mid-tower with a tempered glass side panel.
- You plan to install your own set of 120mm cooling fans.
- You want a chassis built with a steel front panel.
Skip if
- You need pre-installed fans included out of the box.
- You require modern high-speed USB Type-C ports on the front I/O.
Verdict: ARrase Mid-Tower E-ATX Tempered Glass Case provides broad motherboard compatibility and clear component visibility in a standard mid-tower profile. It works well if you already have dedicated cooling fans and require E-ATX clearance.
Anidees AI Crystal XL Full Tower
Best for: large custom liquid cooling and HPTX builds
- Motherboard Support
- HPTX, XL-ATX, E-ATX, ATX, m-ATX
- Case Type
- Full Tower
- Radiator Support
- 480 mm
- Max GPU Length
- 530 mm
- Side Panel
- Tempered Glass
- Use
- Gaming
The Anidees AI Crystal XL PRO Full Tower Case is a massive chassis designed for oversized hardware and extensive cooling setups. It accommodates motherboards up to HPTX, graphics cards up to 530 mm long, and CPU coolers reaching 190 mm in height. You can swap between included mesh and tempered glass front panels to balance airflow. It suits you if you run large components or multi-radiator loops.
Pros
- Accommodates oversized motherboards including HPTX, XL-ATX, and E-ATX
- Supports up to 480 mm radiators on the top and front mounts
- Includes both mesh and tempered glass interchangeable front panels
- Clearance for graphics cards up to 530 mm long
Cons
- Heavy bare chassis weighing 44.1 pounds
- Vertical graphics card thickness limited to 49 mm
- No pre-installed cooling fans listed in specifications
Good fit if
- You run extra-large motherboards such as HPTX or XL-ATX.
- You build custom liquid cooling loops requiring 480 mm radiators.
- You need internal storage configurations supporting up to 12 drives.
Skip if
- You need a compact or lightweight case that is easy to move.
- You plan to vertically mount a graphics card thicker than 49 mm.
- You want a chassis that includes pre-installed case fans out of the box.
Verdict: Anidees AI Crystal XL PRO Full Tower Case offers expansive clearance for HPTX motherboards, 530 mm graphics cards, and dual 480 mm radiators. It provides interchangeable front panels and twelve drive positions for large gaming builds.
MUSETEX ATX Mid-Tower with Magnetic Glass Door
Best for: ATX builds needing maximum included fan cooling
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 6 PWM ARGB Fans
- Radiator Support
- 280
- Use
- Gaming
View on Amazon: MUSETEX ATX Mid-Tower with Magnetic Glass Door
This mid-tower case gives you six pre-installed PWM ARGB fans and a mesh front panel for direct airflow. A magnetic tempered glass side door swings open without tools, simplifying internal access and cleaning. You get support for standard ATX motherboards, top 280mm radiators, and vertical graphics card mounting. It suits builders who want full cooling coverage and accessible glass-door hardware display out of the box.
Pros
- Six pre-installed adjustable-speed PWM ARGB fans
- Tool-free magnetic swinging tempered glass side door
- Mesh front panel for open airflow
- Storage clearance for up to six drives
Cons
- Motherboard support limited to ATX without E-ATX compatibility
- Top radiator mount maxes out at 280mm
- Lighting requires a motherboard with a 3-pin ARGB header
Good fit if
- You want a complete six-fan cooling configuration out of the box.
- You prefer a toolless magnetic side door for easy internal access.
- You build with a standard ATX motherboard and up to six storage drives.
Skip if
- You require support for E-ATX or larger motherboards.
- You plan to install a 360mm liquid cooling radiator.
- Your motherboard lacks a 3-pin ARGB lighting interface.
Verdict: MUSETEX Mid-Tower Case with 6 PWM Fans delivers ready-to-run airflow and easy maintenance through its hinged glass panel. It is built for ATX systems that need high fan counts and direct mesh intake.
Lian Li LANCOOL III E-ATX Mid-Tower Case
Best for: high-airflow builds with massive graphics cards
- Motherboard Support
- E-ATX, ATX, Micro-ATX, Mini-ITX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4 x 140mm PWM
- Use
- Gaming
- Lighting
- RGB
The Lian Li LANCOOL III is a mid-tower PC case designed to house E-ATX, ATX, Micro-ATX, or Mini-ITX motherboards. It includes four 140mm PWM fans, fine mesh exterior panels, and hinged 4.0mm tempered glass doors. You get dedicated swinging magnetic covers for cable routing and space for up to twelve 2.5-inch drives. It suits you if you need high stock airflow and room for large graphics cards.
Pros
- Includes four 140mm PWM cooling fans
- Hinged 4.0mm tempered glass doors and drop-down PSU access
- Mounts up to twelve 2.5-inch SSDs or four 3.5-inch HDDs
- Toolless magnetic cable covers conceal routing channels
Cons
- E-ATX motherboard support restricted to widths under 280mm
- Heavy chassis weight of 31.1 pounds unpopulated
Good fit if
- You want four pre-installed 140mm PWM fans for high-volume airflow.
- You plan to install an oversized graphics card like an NVIDIA 4000 series GPU.
- You need internal mounting space for up to twelve 2.5-inch storage drives.
Skip if
- You use an E-ATX motherboard wider than 280mm.
- You need a lightweight chassis that is easy to relocate.
Verdict: Lian Li LANCOOL III E-ATX Mid-Tower provides strong factory airflow and expansive drive capacity inside a modular steel chassis. It delivers ample clearance for modern full-sized GPUs alongside accessible hinged panels.
MOROVOL Mid-Tower Mesh ATX Case
Best for: standard ATX setups needing out-of-the-box airflow
- Motherboard Support
- ATX, Micro-ATX, Mini-ITX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4x 120mm RGB
- Max GPU Length
- 300mm
- Use
- Gaming
The MOROVOL Mesh ATX Mid Tower Case gives you a mesh front panel paired with a tempered glass side panel for component display. It includes four pre-installed 120mm fixed RGB fans to maintain internal airflow. Inside, the chassis supports standard ATX, Micro-ATX, or Mini-ITX motherboards, graphics cards up to 300mm, and CPU air coolers up to 155mm. It suits you if you want ready-to-use cooling for a mid-sized gaming build.
Pros
- Includes four pre-installed 120mm RGB fans
- Diamond-mesh front panel supports high airflow
- Tempered glass side panel for component visibility
- Supports two 2.5-inch SSDs and two 3.5-inch HDDs
Cons
- Fan lighting is fixed and not addressable
- Maximum graphics card length is limited to 300mm
- CPU cooler clearance caps at 155mm
Good fit if
- You want out-of-the-box airflow with four included cooling fans.
- You plan to run a standard ATX build with a GPU under 300mm.
- You need mounting space for up to four total storage drives.
Skip if
- You need software-controllable addressable RGB lighting.
- You use an E-ATX motherboard or a graphics card longer than 300mm.
- You install a CPU air cooler taller than 155mm.
Verdict: MOROVOL Mesh ATX Mid Tower Case delivers balanced out-of-the-box ventilation through its mesh facade and four included fans. It requires mindful component selection to stay within its 300mm GPU and 155mm CPU cooler limits.
MOROVOL Micro-ATX Panoramic Glass PC Case
Best for: compact Micro-ATX builds needing wide glass visibility
- Motherboard Support
- Micro-ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3 Fans
- Use
- Gaming
- Connectivity
- USB 3.0
This compact chassis measures 13.39 by 10.87 by 12.44 inches and houses Micro-ATX motherboards. It features a 270-degree panoramic tempered glass view across three sides, giving you full visual exposure of internal components. Three pre-installed fans provide immediate airflow out of the box, accompanied by a front-panel USB 3.0 port for peripherals. It suits you if you want a smaller footprint with high component visibility.
Pros
- 270-degree panoramic tempered glass across three sides
- Three pre-installed cooling fans included
- Compact dimensions of 13.39 by 10.87 by 12.44 inches
- Front-panel USB 3.0 port
Cons
- Motherboard support limited to Micro-ATX
- No front-panel USB Type-C port listed
Good fit if
- You build with a Micro-ATX motherboard.
- You want three-sided panoramic glass to display your components.
- You prefer a case that includes three cooling fans out of the box.
Skip if
- You plan to use a standard ATX or E-ATX motherboard.
- You require front-panel USB Type-C connectivity.
Verdict: MOROVOL Micro-ATX Panoramic Glass Case delivers wide component visibility with its three-sided glass layout and included trio of fans. It offers a space-saving layout dedicated strictly to Micro-ATX builds.
Specifications side by side
| Spec | Bgears b-Voguish E-ATX Tempered Glass Case | ARrase E-ATX Mid-Tower Case | Anidees AI Crystal XL Full Tower | MUSETEX ATX Mid-Tower with Magnetic Glass Door | Lian Li LANCOOL III E-ATX Mid-Tower Case | MOROVOL Mid-Tower Mesh ATX Case | MOROVOL Micro-ATX Panoramic Glass PC Case |
|---|---|---|---|---|---|---|---|
| Motherboard Support | E-ATX, ATX, Micro-ATX, mini-ITX | E-ATX/ATX/MATX/ITX | HPTX, XL-ATX, E-ATX, ATX, m-ATX | ATX | E-ATX, ATX, Micro-ATX, Mini-ITX | ATX, Micro-ATX, Mini-ITX | Micro-ATX |
| Case Type | not specified | Mid-Tower | Full Tower | Mid-Tower | Mid-Tower | Mid Tower | Mid-Tower |
| Side Panel | Tempered Glass | Tempered Glass | not specified | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass |
| Included Fans | not specified | not specified | not specified | 6 PWM ARGB Fans | 4 x 140mm PWM | 4x 120mm RGB | 3 Fans |
| Radiator Support | 240mm | not specified | 480 mm | 280 | not specified | not specified | not specified |
| Max GPU Length | 370mm | not specified | 530 mm | not specified | not specified | 300mm | not specified |
| Tower Size | not specified | Mid-Tower | Full-Tower | Mid-Tower | not specified | Mid-Tower | not specified |
| Use | Gaming | Gaming | Gaming | Gaming | Gaming | Gaming | Gaming |
| Lighting | not specified | not specified | not specified | ARGB | RGB | RGB | not specified |
| Connectivity | USB 3.0 | USB 3.0 | not specified | USB 3.0 | not specified | USB 3.0 | USB 3.0 |
| Compatible Device | not specified | not specified | Radiator | not specified | not specified | not specified | not specified |
| Dimensions | 8.07 × 15.9 × 19.4 inches | not specified | 24.4 × 9.25 × 23.4 inches | 15.8 × 8.07 × 19 inches | 25.9 × 23 × 12.9 inches | 14.6 × 7.28 × 16.7 inches | 13.4 × 10.9 × 12.4 inches |
| Weight | 11 pounds | 11.5 pounds | 44.1 pounds | 12.6 pounds | 31.1 pounds | not specified | 10.7 pounds |
| Size | large | One Size | not specified | 18.98" x 15.75" x 8.07" | Mid-tower Case | Large Size | 13.39"D x 10.87"W x 12.44"H |
| Color | Black | Style 3 | Black | Black | Black | black | Black |
| Model | BG01893 | 18648 | AI-XL-PRO-LITE | NN8 | PC-LAN3RX | 621 | V3 |
Frequently asked questions
Which alternatives support E-ATX motherboards like the Bgears b-Voguish?
Three alternatives on this list support E-ATX motherboards: the ARrase Mid-Tower, the Anidees AI Crystal XL Full Tower, and the Lian Li LANCOOL III. The ARrase mid-tower provides standard E-ATX clearance with USB 3.0 ports. The Anidees AI Crystal XL expands compatibility to HPTX boards with dual 480 mm radiator room, while the Lian Li LANCOOL III pairs E-ATX support with RGB lighting.
Which alternative case provides the most radiator and cooling capacity?
The Anidees AI Crystal XL Full Tower offers the largest liquid cooling clearance among these options. It is built as a full-tower chassis supporting dual 480 mm radiators and graphics cards up to 530 mm in length. In addition to interchangeable front panels, it features twelve drive positions. Its 44.1-pound frame accommodates massive custom liquid cooling setups that mid-tower cases cannot house.
Are there alternative cases that come with cooling fans already included?
Yes, several alternatives include pre-installed cooling fans ready for your build out of the box. The MUSETEX ATX Mid-Tower comes equipped with six PWM ARGB fans and direct mesh intake behind a magnetic glass door. The MOROVOL Mid-Tower Mesh includes four RGB fans, while the compact MOROVOL Micro-ATX Panoramic Glass case includes a trio of fans paired with three-sided viewing glass.
What is the most compact alternative to the Bgears b-Voguish?
The MOROVOL Micro-ATX Panoramic Glass PC Case is the smallest option featured on this list. Measuring 13.4 inches long, 10.9 inches wide, and 12.4 inches high, it weighs 10.7 pounds. Unlike the larger E-ATX and ATX enclosures, this case is built strictly for space-saving Micro-ATX motherboards while delivering wide component visibility through three-sided tempered glass and front USB 3.0 connectivity.
What component clearance limits should you consider with the MOROVOL Mid-Tower Mesh case?
You must ensure your graphics card does not exceed 300 mm and your CPU air cooler stays under 155 mm. The MOROVOL Mid-Tower Mesh case is designed with tighter internal dimensions than standard full-size enclosures, measuring 14.6 inches long and 7.28 inches wide. Verifying these hardware clearances beforehand prevents fitment issues with bulky triple-fan video cards or tall dual-tower heatsinks.
Which alternative cases include built-in lighting features?
The MUSETEX ATX Mid-Tower, Lian Li LANCOOL III, and MOROVOL Mid-Tower Mesh all incorporate factory lighting. The MUSETEX model provides ARGB illumination through its six included PWM fans. The Lian Li LANCOOL III integrates RGB lighting into its modular steel body. For standard setups, the MOROVOL Mid-Tower Mesh includes four RGB fans behind a front mesh intake alongside tempered glass.
How does the Lian Li LANCOOL III compare in chassis weight and structure?
The Lian Li LANCOOL III is significantly heavier and more structurally modular than the 11-pound Bgears b-Voguish. Weighing 31.1 pounds, the LANCOOL III utilizes a modular steel construction with hinged tempered glass panels. It measures 25.9 inches long, 23 inches wide, and 12.9 inches high. This substantial frame provides expansive drive capacity, integrated RGB lighting, and broad clearance for full-sized modern graphics cards.