6 Best Alternatives to the Lian Li LANCOOL 217 ATX Mid-Tower PC Case (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you want different options for your next build, exploring lian li lancool 217 atx mid tower PC case alternatives gives you more layout and styling choices. The original Lian Li LANCOOL 217 stands out with five pre-installed PWM fans, including two 170x30mm front intake fans, two 120mm reversed-blade fans, and a 140mm rear fan. It also provides real wood accents in walnut or beech, dual power supply mounting positions for units up to 220mm, and support for back-connect ATX motherboards.
You might want something else if your build requires different exterior dimensions, panoramic tempered glass panels instead of wood trim, or support for 420mm radiators. You may also prefer a dual-chamber layout or pre-installed ARGB lighting from another brand. The 6 alternatives below were chosen because their specifications overlap with the original, delivering standard ATX motherboard support, flexible cooling configurations, and back-connect cable management options.
Our top pick: Lian Li LANCOOL 217 Mid-Tower Case with Wood Accents.
How Each Alternative Compares
The Fractal Design Focus G offers 380 mm of graphics card clearance and filtered front ventilation inside a chassis weighing only 9.92 pounds. That makes it over thirteen pounds lighter and noticeably more compact than the Lian Li LANCOOL 217. However, you miss out on the LANCOOL 217's five pre-installed PWM fans, dual 170 mm front intakes, real wood accents, and support for back-connect motherboards. You also lose the dual-orientation 220 mm power supply mount. Choose the Focus G if you want a lightweight ATX mid-tower with standard drive storage and room for long graphics cards without needing oversized fans or hidden cable routing.
Fractal Design North ATX Mid-Tower Case
The Fractal Design North matches the LANCOOL 217 by featuring real walnut wood front styling, but it packages it into a narrower 8.46-inch frame with integrated Type-C connectivity. It accommodates graphics cards up to 355 mm while weighing slightly less at 20.9 pounds. In exchange, the North gives up the LANCOOL 217's five-fan stock configuration, including the massive 170 mm front fans and reversed-blade intake fans. It also omits back-connect motherboard support and dual power supply mounting brackets. Pick the North if you want real wood aesthetic styling combined with standard ATX component spacing and front Type-C connectivity.
The Lian Li Lancool 205 Mesh Type-C provides three included ARGB PWM fans, top-panel Type-C connectivity, and modular mounting brackets inside a steel and tempered glass structure. It supports ATX, Micro ATX, and Mini-ITX motherboards. Compared to the LANCOOL 217, it drops the real wood exterior detailing, back-connect motherboard compatibility, and dual-button power setup. It also trades the 217's five stock fans—such as the two 170 mm front intakes—for a standard three-fan layout. You should choose the Lancool 205 Mesh if you want integrated ARGB fan lighting and top Type-C access in a straightforward chassis without decorative wood panels.
The Jonsbo Curved Glass ATX Mid-Tower provides a seamless panoramic glass viewing angle along with generous clearance for oversized graphics cards and liquid cooling radiators. At 11.8 inches wide and 16.1 inches tall, it features a lower, broader stance than the taller LANCOOL 217. However, it sacrifices the 217's five included fans, dual 170 mm front intakes, wood accents, and back-connect ATX motherboard support. It also offers more limited internal drive storage. You should pick this Jonsbo chassis if you want an unobstructed panoramic hardware display and plan to rely mainly on motherboard storage and your own custom cooling hardware.
MUSETEX ATX Mid-Tower Dual Glass Case
The MUSETEX ATX Mid-Tower Dual Glass Case delivers a panoramic dual-chamber layout with 400 mm of graphics card clearance and dedicated top 360 mm radiator support. It also includes front Type-C connectivity and weighs 16.9 pounds. In contrast, the LANCOOL 217 emphasizes traditional front-to-back ventilation with five pre-installed fans, including dual 170 mm front intakes, along with real wood accents and back-connect motherboard support. The MUSETEX lacks those wood finishes and back-connect compatibility. Select the MUSETEX if you want a panoramic dual-chamber build designed specifically around a top-mounted 360 mm liquid radiator and an extra-long graphics card.
The ASUS TUF Gaming GT302 matches the LANCOOL 217 by supporting hidden-connector motherboards for cleaner cabling. It goes further with four thick 140 mm ARGB fans, interchangeable side panels, and a removable top panel. However, at 26.2 pounds and 20.5 inches tall, the GT302 is heavier and bulkier than the 23.1-pound LANCOOL 217. It also foregoes the 217's natural wood finishes, dual-orientation power supply bay, and 170 mm front intake fans. You should pick the GT302 if you want hidden-connector board routing paired with modular panels and pre-installed 140 mm ARGB fans rather than wood aesthetics.
Quick picks
Our 7 picks
Lian Li LANCOOL 217 Mid-Tower Case with Wood Accents
Best for: stock airflow and back-connect ATX builds
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Dimensions
- 19 × 9.37 × 19.8 inches
- Weight
- 23.1 pounds
View on Amazon: Lian Li LANCOOL 217 Mid-Tower Case with Wood Accents
The Lian Li LANCOOL 217 is an ATX mid-tower chassis built with real wood accents. It comes equipped with five pre-installed PWM fans, including two 170mm intake fans, and supports back-connect motherboards. Dual power supply mounting positions fit units up to 220mm long. Two power buttons provide flexible placement access. This case suits you if you want complete stock cooling and clean cable routing.
Pros
- Includes five pre-installed fans, including two 170mm front intakes
- Supports back-connect motherboards for clean cable routing
- Dual-orientation PSU mounting fits units up to 220mm
- Toolless fan bracket with adjustable CPU-focused airflow mode
Cons
- Heavy base weight at 23.1 pounds before adding parts
- Front 170mm fan dimension is uncommon for aftermarket replacements
Good fit if
- You want out-of-the-box cooling with five included fans
- You build with a back-connect motherboard
- You use a long power supply measuring up to 220mm
Skip if
- You need a lightweight chassis under 20 pounds
- You prefer standard 120mm or 140mm front fan replacements
Verdict: Lian Li LANCOOL 217 Mid-Tower Case provides extensive stock cooling and back-connect motherboard support in an adaptable chassis. It suits builds requiring high airflow and generous power supply clearance.
Fractal Design North ATX Mid-Tower Case
Best for: airflow-focused builds with real wood accents
- Motherboard Support
- ATX, mATX, ITX
- Case Type
- Mid Tower
- Side Panel
- Mesh
- Included Fans
- 2x 140 mm Aspect PWM
- Radiator Support
- 360 mm
- Max GPU Length
- 355 mm
The Fractal Design North is an ATX mid-tower case featuring genuine walnut wood front bars and a mesh side panel. It includes two 140 mm Aspect PWM fans and supports ATX, mATX, and ITX motherboards. You get room for graphics cards up to 355 mm, though front-mounting a 360 mm radiator limits GPU space to 300 mm. It suits builders seeking natural wood styling paired with dedicated mesh ventilation.
Pros
- Includes two 140 mm Aspect PWM front fans
- Real walnut wood front panel bars
- Supports radiators up to 360 mm
- Accommodates graphics cards up to 355 mm
- Two dedicated 2.5-inch and two combo 3.5/2.5-inch drive mounts
Cons
- GPU clearance drops to 300 mm when installing a 360 mm front radiator
- Includes only two front fans without a rear exhaust fan
Good fit if
- You want genuine walnut accents paired with an open mesh side panel.
- You use a standard ATX, micro-ATX, or Mini-ITX motherboard.
- You need mounting space for up to four storage drives out of the box.
Skip if
- You run a graphics card longer than 300 mm alongside a front-mounted 360 mm radiator.
- You need pre-installed rear or top exhaust fans.
Verdict: Fractal Design North ATX Mid-Tower Case pairs real walnut front styling with mesh ventilation and room for 355 mm graphics cards. It delivers practical hardware compatibility for standard ATX configurations.
MUSETEX ATX Mid-Tower Dual Glass Case
Best for: panoramic builds with top 360mm radiators
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3x 120mm
- Radiator Support
- 360mm
- Max GPU Length
- 400mm
This MUSETEX dual-chamber ATX mid-tower case features dual tempered glass panels for an open 270-degree view of your components. It supports a top-mounted 360mm liquid cooling radiator, graphics cards up to 400mm long, and CPU air coolers up to 176mm tall. You get three pre-installed 120mm fans, tool-free snap-on panels, and front USB-C connectivity. It suits builders wanting panoramic hardware visibility alongside room for full-sized liquid cooling setups.
Pros
- Supports up to a 360mm radiator on the top mount
- Accommodates graphics cards up to 400mm and CPU coolers up to 176mm
- Includes three pre-installed 120mm fans
- Front I/O features a USB 3.2 Type-C port
- Tool-free snap-on panels enable quick hardware access
Cons
- Dual glass panels eliminate front mesh intake options
- Includes three fans with no pre-installed rear exhaust fan listed
Good fit if
- You plan to mount a 360mm radiator at the top of your chassis.
- You need room for an extra-long graphics card up to 400mm.
- You want a dual-chamber layout with seamless corner glass visibility.
Skip if
- You require a traditional perforated mesh front intake panel.
- You build with motherboards larger than standard ATX.
Verdict: MUSETEX Dual-Glass ATX Mid-Tower delivers generous 400mm GPU clearance and dedicated top 360mm radiator support inside a panoramic dual-chamber chassis.
NZXT H7 Flow RGB Mid-Tower Case
Best for: Large liquid radiators and direct GPU airflow
- Motherboard Support
- ATX
- Tower Size
- Mid-Tower
- Lighting
- RGB
- Dimensions
- 18.4 × 9.6 × 21.4 inches
- Weight
- 24.8 pounds
The NZXT H7 Flow RGB is an ATX mid-tower chassis built for high-demand cooling setups. You get support for up to a 420mm front radiator, a 360mm top radiator, and three bottom-mounted 120mm fans aimed directly at your graphics card. It includes three front 120mm fans and mesh ventilation panels, making it suitable for hardware requiring substantial airflow.
Pros
- Supports radiators up to 420mm in front and 360mm on top
- Three 120mm front intake fans included out of the box
- Base accepts three 120mm fans dedicated to graphics card intake
- Routing channels with built-in hooks and straps for cable management
Cons
- Weighs 24.8 pounds without installed components
- Stands 21.4 inches tall, requiring significant vertical space
Good fit if
- You plan to install a 420mm front liquid cooling radiator.
- You want direct graphics card airflow from three bottom fan mounts.
- You prefer pre-installed RGB intake fans.
Skip if
- You need a lightweight case under 20 pounds.
- You have limited vertical desk clearance under 22 inches.
Verdict: NZXT H7 Flow RGB Mid-Tower Case suits builders who want high-volume airflow, direct base GPU cooling, and 420mm radiator capability in a spacious ATX chassis.
Corsair iCUE Link 3500X RGB Mid-Tower
Best for: wraparound panoramic views and reverse-connection builds
- Motherboard Support
- Mini-ITX to EATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3x RX120 RGB
- Dimensions
- 19.9 × 9.45 × 18.1 inches
- Weight
- 20.3 pounds
The Corsair iCUE Link 3500X is a mid-tower case featuring wraparound panoramic tempered glass panels. You get three pre-installed RX120 RGB fans, an included iCUE LINK System Hub, and support for up to 10 120mm fans. It accommodates motherboards from Mini-ITX up to EATX, including reverse-connection models. This chassis suits you if you want an unobstructed component view with streamlined cabling.
Pros
- Wraparound removable front and side tempered glass panels
- Includes three RX120 RGB fans and an iCUE LINK System Hub
- Supports ASUS BTF and MSI Project Zero reverse-connection motherboards
- Mounting points for up to 10 120mm fans across side, roof, and PSU shroud
Cons
- Includes three fans out of the 10 total supported mounts
- Specifications only state support for 120mm fan sizes
Good fit if
- You want panoramic tempered glass along both the front and side.
- You build with reverse-connection motherboards like ASUS BTF or MSI Project Zero.
- You plan to build within the Corsair iCUE LINK cable ecosystem.
Skip if
- You need more than three pre-installed fans out of the box.
- You want a chassis lighter than 20.3 pounds.
Verdict: Corsair iCUE Link 3500X Panoramic ATX Case delivers unobstructed interior viewing for builders deploying reverse-connection motherboards and iCUE LINK cooling hardware. It eliminates front corner pillars while accommodating large EATX boards and up to 10 fans.
darkFlash Curved Glass ATX Mid-Tower
Best for: BTF builds needing panoramic ARGB cooling
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4x ARGB
- Radiator Support
- 360mm
- Motherboard Support
- ATX
- Use
- Gaming
This mid-tower chassis features 270-degree curved tempered glass and includes four ARGB fans out of the box. It supports ATX back-connect BTF motherboards, graphics cards up to 4090 size, and dual 360mm radiators. The interior accommodates up to 10 cooling fans and provides a Type-C port. You gain uninterrupted component visibility alongside hidden motherboard cable routing.
Pros
- Includes four pre-installed ARGB fans
- Single-piece 270-degree curved tempered glass view
- Compatible with back-plug BTF motherboards
- Supports dual 360mm radiators and up to 10 fans
Cons
- Does not include an RGB hub controller
- Leaves six of ten fan slots unpopulated out of the box
Good fit if
- You want panoramic curved glass with included ARGB fans.
- You build with a back-connecting BTF ATX motherboard.
- You plan to mount up to dual 360mm radiators.
Skip if
- You need an included RGB controller hub to run lighting.
- You prefer standard mesh airflow front panels.
Verdict: darkFlash Curved Glass ATX Mid-Tower Case suits builders prioritizing curved panoramic glass and pre-installed ARGB lighting for back-connect motherboard setups.
Jonsbo TK-3 Curved Glass Mid-Tower
Best for: BTF motherboard panoramic showcase builds
- Motherboard Support
- ATX
- Tower Size
- Mid-Tower
- Dimensions
- 17.2 × 11.3 × 16.3 inches
- Weight
- 16.1 pounds
The Jonsbo TK-3 Curved Glass Mid-Tower is an ATX chassis featuring a seamless 270-degree curved glass panel and a dual-chamber layout. It accommodates back-connect BTF motherboards, graphics cards up to 420mm, and dual 360mm radiators at the top and bottom. It suits you if you want a pillarless panoramic view for high-clearance hardware.
Pros
- One-piece curved glass panel provides a 270-degree view without corner pillars
- Supports back-connect BTF motherboards across ATX, Micro-ATX, and ITX sizes
- Fits graphics cards up to 420mm and dual 360mm radiators simultaneously
- Front I/O features a 10Gbps USB 3.2 Gen2 Type-C port and two USB 3.0 ports
Cons
- Does not include pre-installed cooling fans despite ten mounting positions
- Dual-chamber design results in a wide 11.3-inch desktop footprint
- Internal drive capacity is limited to three total storage drives
Good fit if
- You want a pillarless 270-degree panoramic glass display for your components.
- You build with a back-connect BTF motherboard to route wiring behind the tray.
- You run a high-end graphics card up to 420mm with dual 360mm liquid cooling radiators.
Skip if
- You want a chassis that includes cooling fans out of the box.
- You have limited desk width for an 11.3-inch wide enclosure.
- You need more than three dedicated drive bays for mass storage.
Verdict: Jonsbo TK-3 Curved Glass Mid-Tower gives you a pillarless 270-degree showcase with dedicated support for back-connect BTF motherboards. It fits builders who plan to supply their own cooling fans and want dual 360mm radiator positions.
Specifications side by side
| Spec | Lian Li LANCOOL 217 Mid-Tower Case with Wood Accents | Fractal Design North ATX Mid-Tower Case | MUSETEX ATX Mid-Tower Dual Glass Case | NZXT H7 Flow RGB Mid-Tower Case | Corsair iCUE Link 3500X RGB Mid-Tower | darkFlash Curved Glass ATX Mid-Tower | Jonsbo TK-3 Curved Glass Mid-Tower |
|---|---|---|---|---|---|---|---|
| Motherboard Support | ATX | ATX, mATX, ITX | ATX | not specified | Mini-ITX to EATX | not specified | not specified |
| Case Type | Mid-Tower | Mid Tower | Mid Tower | not specified | Mid-Tower | Mid-Tower | not specified |
| Side Panel | not specified | Mesh | Tempered Glass | not specified | Tempered Glass | Tempered Glass | not specified |
| Included Fans | not specified | 2x 140 mm Aspect PWM | 3x 120mm | not specified | 3x RX120 RGB | 4x ARGB | not specified |
| Radiator Support | not specified | 360 mm | 360mm | not specified | not specified | 360mm | not specified |
| Max GPU Length | not specified | 355 mm | 400mm | not specified | not specified | not specified | not specified |
| Tower Size | Mid-Tower | Mid-Tower | Mid-Tower | Mid-Tower | Mid-Tower | Mid-Tower | Mid-Tower |
| Fan Size | not specified | 140mm | 120mm | not specified | not specified | not specified | not specified |
| Use | not specified | Gaming | Gaming | not specified | not specified | Gaming | not specified |
| Lighting | not specified | not specified | not specified | RGB | RGB | ARGB | not specified |
| Connectivity | not specified | Type-C | Type-C | not specified | not specified | Type-C | not specified |
| Dimensions | 19 × 9.37 × 19.8 inches | 17.6 × 8.46 × 18.5 inches | 16.5 × 11.6 × 14.5 inches | 18.4 × 9.6 × 21.4 inches | 19.9 × 9.45 × 18.1 inches | 11.2 × 18.1 × 15.6 inches | 17.2 × 11.3 × 16.3 inches |
| Weight | 23.1 pounds | 20.9 pounds | 16.9 pounds | 24.8 pounds | 20.3 pounds | 18.9 pounds | 16.1 pounds |
| Color | LAN217W - White | Charcoal Black | Black | Black | Black | White | WHITE |
| Model | LAN217W | FD-C-NOR1C-01 | Y6 | CM-H72FB-R1 | CC-9011280-WW | DPW90 | TK-3 white |
| Size | not specified | ATX | 16.54"D x 11.61"W x 14.49"H | H7 Flow RGB 2024 | iCUE LINK 3500X RGB | not specified | not specified |
If you need compatible power hardware, you can evaluate the best lian li PC power supplies for clearance and wattage.
Frequently asked questions
Which alternative matches the wood accent design of the Lian Li LANCOOL 217?
The Fractal Design North matches this aesthetic directly with real walnut front accents. You get an ATX mid-tower layout featuring mesh ventilation and support for 140mm fans. It accommodates graphics cards up to 355 mm in length while offering USB Type-C front connectivity.
Which option provides back-connect motherboard support like the LANCOOL 217?
The JONSBO TK-3 supports BTF back-connect motherboards directly. This mid-tower chassis features a one-piece curved glass exterior alongside dual 360mm radiator support. If you plan a clean interior build with hidden rear motherboard connectors, it accommodates your hardware within a compact 16.1-pound footprint.
Which alternative offers the greatest graphics card clearance?
The MUSETEX ATX Mid-Tower Dual Glass Case delivers 400mm of graphics card clearance. This dual-chamber chassis accommodates large components alongside a top 360mm radiator and 120mm fans. You also get front USB Type-C connectivity and tempered glass panels to display your gaming configuration clearly.
What is the lightest mid-tower alternative on this list?
The JONSBO TK-3 is the lightest option listed, weighing 16.1 pounds. By comparison, the Lian Li LANCOOL 217 weighs 23.1 pounds, and the NZXT H7 Flow RGB reaches 24.8 pounds. The JONSBO chassis pairs this lighter build with curved glass and standard ATX motherboard compatibility.
Which cases provide panoramic or curved glass views?
Several alternatives feature panoramic viewing panels. The Corsair iCUE Link 3500X RGB provides panoramic tempered glass panels with built-in RGB lighting. If you prefer curved aesthetics, both the darkFlash DPW90 and JONSBO TK-3 feature curved glass constructions that wrap around your ATX gaming components.
Which alternatives include integrated front USB Type-C ports?
The Fractal Design North, MUSETEX Dual Glass, and darkFlash DPW90 all feature front Type-C connectivity. Front Type-C ports allow convenient attachment of modern peripherals, external solid-state drives, and mobile devices directly to your PC case without reaching behind your standard ATX motherboard.