Cooler Master NR200P MAX V2 Mini-ITX PC Case Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you evaluate cooler master nr200p max v2 mini itx PC case alternatives, you can find hardware layouts tailored to different build priorities. The original NR200P MAX V2 excels by integrating an 850W SFX ATX 3.1 power supply and a 280mm liquid cooler directly into an 18.25-liter chassis. It also accommodates vertical graphics cards up to 357.6mm using an included PCIe 4.0 riser cable.
You might want something else if you require a different enclosure size, feature set, or brand. You may need a smaller 15-liter footprint, an open-frame chassis with dual 360mm radiator support, or compatibility with standard ATX power supplies instead of SFX hardware. You might also prefer a case without bundled parts so you can install your own cooling system. The 6 alternatives on this list were chosen because their specifications overlap with the original, delivering Mini-ITX motherboard support, generous graphics card clearance, and compact thermal configurations.
Our top pick: Cooler Master NR200P MAX V2 Mini-ITX Case.
Comparing Cooler Master NR200P MAX Alternatives
FSP Open Frame Dual Chamber Case
The FSP Open Frame Dual Chamber Case trades compact small-form-factor sizing for an open showcase layout measuring 455mm wide and 530mm high. It expands cooling capability by supporting dual 360mm radiators, surpassing the original chassis with its single 280mm radiator bracket. However, you give up the space-saving 18.25-liter enclosure, the pre-installed 850W ATX 3.1 power supply, the custom 280mm liquid cooler, and the bundled vertical riser cable. You also get a distinct red aluminum frame instead of the subdued black and grey finish. You should pick this case if you want an open showcase gaming rig built around dual 360mm liquid cooling loops rather than an integrated compact system.
Cooler Master NCORE 100 MAX Mini-ITX Case
The Cooler Master NCORE 100 MAX reduces overall volume to a 15.7-liter expandable frame and cuts weight to 13.89 pounds. Like the original, it bundles an 850W power supply, but it uses an ATX 3.0 unit instead of ATX 3.1 with a 90-degree 12V-2x6 connector. You also step down from a 280mm liquid cooler to a 120mm AIO with a 120mm fan. Maximum graphics card clearance decreases slightly from 357.6mm to 356mm. Its exterior dimensions stand at 18.93 inches wide, 8.35 inches high, and 6.1 inches long. You should choose this model if you want a bundled power and cooling setup in a slimmer vertical footprint.
Cooler Master NR200P V2 Mini-ITX Case
The Cooler Master NR200P V2 provides the exact same 18.25-liter enclosure size and 280mm radiator support as the original. It features a tempered glass side panel and drops chassis weight to 10.85 pounds compared to the 16.98-pound original bundle. Graphics card clearance is nearly identical at 357mm versus 357.6mm. What you give up is the pre-installed 850W ATX 3.1 power supply, the custom-tubing 280mm liquid cooler, and short-length modular cabling. You must supply your own SFX power unit and cooling solution. You should pick this chassis if you like the physical layout of the original case but want the freedom to install your own power supply and hardware behind glass.
Thermaltake TR100 18.9L Mini-ITX Case
The Thermaltake TR100 offers a 360mm graphics card clearance, slightly edging out the 357.6mm clearance on the original case. It maintains 280mm radiator compatibility within an 18.9-liter footprint, which is marginally larger than the original 18.25-liter chassis. It comes in a distinct Matcha Green color option. What you give up is the all-in-one bundle convenience. There is no pre-fitted 850W ATX 3.1 SFX power supply, no integrated 280mm liquid cooler, and no bundled PCIe 4.0 riser cable. You should pick this alternative if you need clearance for long 360mm graphics cards, want support for your own 280mm radiator, and prefer a green small-form-factor exterior.
SSUPD Meshroom S V2 SFF Mini-ITX Case
The SSUPD Meshroom S V2 delivers a smaller 15-liter volume and a lighter 6.83-pound build compared to the 18.25-liter, 16.98-pound original. It upgrades the riser connection by including a PCIe 5.0 riser cable, surpassing the original PCIe 4.0 riser. It also features front Type-C connectivity, 200mm fan support, and preserves 280mm radiator capability. However, you give up the integrated components, as it lacks the original pre-mounted 280mm liquid cooler and 850W ATX 3.1 power unit with 90-degree 12V-2x6 cabling. You should pick this case if you want a smaller footprint with high ventilation, a PCIe 5.0 riser, and full flexibility to choose your own cooling and power parts.
SilverStone Small Form Factor Mini-ITX Case
The SilverStone Small Form Factor Case accepts full-size ATX power supplies and Mini-DTX motherboards, whereas the original case strictly requires SFX power units and Mini-ITX boards. At 6 pounds, it is significantly lighter than the original 16.98-pound chassis bundle. However, graphics card clearance drops sharply from 357.6mm down to 10.5 inches. You also lose 280mm radiator compatibility, the bundled 850W ATX 3.1 power unit, the 280mm AIO cooler, and the vertical GPU riser bracket. Its dimensions measure 12 inches wide, 10 inches high, and 14 inches long. You should choose this case if you plan to use standard ATX power hardware and have a compact graphics card under 10.5 inches.
Quick picks
Our 7 picks
Cooler Master NR200P MAX V2 Mini-ITX Case
Best for: bundled SFF builds with long graphics cards
- Motherboard Support
- Mini-ITX
- Case Type
- Small Form Factor
- Radiator Support
- 280mm
- Max GPU Length
- 357.6mm
- Case Volume
- 18.25L
- Dimensions
- 14.8 × 7.28 × 11.5 inches
The Cooler Master NR200P MAX V2 is an 18.25-liter Small Form Factor case designed exclusively for Mini-ITX motherboards. It includes an integrated 280mm liquid cooling radiator and an 850W SFX Gold ATX 3.1 power supply with custom short cables. It fits graphics cards up to 357.6mm in length using an included PCIe 4.0 riser cable. This unit suits you if you want factory-matched cooling and power in a compact footprint.
Pros
- Includes pre-installed 280mm liquid cooling radiator
- Comes with 850W SFX Gold ATX 3.1 power supply and custom cables
- Supports GPUs up to 357.6mm with included PCIe 4.0 riser cable
- Compact 18.25-liter footprint
Cons
- Supports only Mini-ITX motherboards
- Restricted to vertical GPU mounting setups
Good fit if
- You want an enclosure bundled with a matched 280mm cooler and 850W power supply.
- You plan to install a long graphics card up to 357.6mm in an 18.25-liter chassis.
- You need ATX 3.1 power delivery with a 90-degree 12V-2x6 connector.
Skip if
- You plan to use a motherboard larger than Mini-ITX.
- You want to choose your own standalone power supply or cooling setup.
- You prefer mounting your GPU directly to the motherboard without a riser cable.
Verdict: Cooler Master NR200P MAX V2 Mini-ITX Case streamlines compact building by combining an 18.25-liter chassis with a pre-fitted 280mm liquid cooler and 850W ATX 3.1 power supply. It accommodates large graphics cards up to 357.6mm through its dedicated vertical mount configuration.
FSP Open Frame Dual Chamber Case
Best for: dual-radiator open-frame showcase liquid cooling builds
- Motherboard Support
- EATX, ATX, Mini-ITX
- Case Type
- Open Frame
- Radiator Support
- 360 mm
- Use
- Gaming
- Width
- 455 millimeters
- Height
- 530 millimeters
The FSP Open Frame Dual Chamber Case accommodates Mini-ITX motherboards inside an open-air structure. It features dual chambers that support dual 360mm radiators for liquid cooling setups. Built with an aluminum frame and two tempered glass panels, this chassis measures 455 millimeters wide and 530 millimeters tall. It suits you if you want an open display case with high cooling capacity rather than a conventional compact small form factor build.
Pros
- Supports dual 360mm radiators across two water-cooling chambers
- Aluminum frame with two tempered glass panels
- Front panel includes USB Type-C connectivity
- Center compartment designed for cable management
Cons
- Large dimensions measuring 455 millimeters wide and 530 millimeters tall
- Open frame construction leaves internal components exposed
Good fit if
- You plan to install dual 360mm radiators for water cooling.
- You want an open-frame aluminum design with tempered glass panels.
Skip if
- You need a compact small form factor enclosure for limited desk space.
- You prefer an enclosed case that shields internal hardware from dust.
Verdict: FSP Open Frame Dual Chamber Case provides dual 360mm radiator support within an open aluminum and tempered glass chassis. Its 530-millimeter height and open design make it a spacious showcase rather than a compact enclosure.
Cooler Master NCORE 100 MAX Mini-ITX Case
Best for: compact builds needing bundled power and 120mm cooling
- Motherboard Support
- Mini-ITX
- Case Type
- SFF
- Radiator Support
- 120mm
- Max GPU Length
- 356mm
- Case Volume
- 15.7L
- Tower Size
- Small Form Factor
The Cooler Master NCORE 100 MAX Mini-ITX Case is a 15.7-liter vertical small form factor chassis bundled with pre-routed components. You get an integrated 120mm liquid cooling radiator measuring 38mm thick and an 850W SFX Gold ATX 3.0 power supply. Its expandable frame widens from 155mm to 172mm to fit vertical graphics cards up to 356mm long. It suits you if you want a complete, pre-configured Mini-ITX build setup.
Pros
- Includes 850W SFX ATX 3.0 Gold power supply with custom short cables
- Built-in 120mm liquid cooler with 38mm radiator
- Expandable frame increases width from 155mm to 172mm for larger GPUs
- Supports vertical graphics cards up to 356mm in length
Cons
- Supports only Mini-ITX motherboards
- Restricted to vertical GPU mounting
- Limited to 120mm radiator liquid cooling
Good fit if
- You want an integrated 850W power supply and 120mm liquid cooler in one bundle.
- You run a long graphics card up to 356mm and need an expandable frame.
Skip if
- You need support for larger 240mm or 280mm liquid cooling radiators.
- You plan to mount your graphics card horizontally.
Verdict: Cooler Master NCORE 100 MAX Mini-ITX Case pairs a 120mm AIO with an 850W ATX 3.0 power supply inside a compact 15.7-liter expandable frame. It gives you a clean vertical layout capable of housing graphics cards up to 356mm.
Cooler Master NR200P V2 Mini-ITX Case
Best for: compact builds with long graphics cards
- Motherboard Support
- Mini-ITX
- Side Panel
- Tempered Glass or Vented Steel
- Radiator Support
- 280mm
- Max GPU Length
- 357mm
- Case Volume
- 18.25L
- Dimensions
- 14.7 × 7.28 × 11.5 inches
This Cooler Master NR200P V2 is an 18.25-liter Mini-ITX chassis designed for compact high-end builds. You get dedicated support for top-mounted 240mm or 280mm liquid cooling radiators alongside vertical GPU mounting for cards up to 357mm in length. It accommodates strictly SFX power supplies and includes a PCIe 4.0 riser cable. It suits you if you want a compact footprint with full-size graphics clearance and dual panel options.
Pros
- Supports up to 357mm GPUs with included PCIe 4.0 riser
- Accommodates 240mm and 280mm top-mounted radiators
- Includes both tempered glass and vented steel side panels
- Equipped with front I/O USB Type-C port
Cons
- Supports SFX power supplies only, excluding ATX units
- Restricted exclusively to vertical GPU mounting
Good fit if
- You need clearance for graphics cards up to 357mm long.
- You plan to cool your processor with a 240mm or 280mm radiator.
- You use an SFX form-factor power supply.
Skip if
- You need to mount a standard ATX power supply.
- You prefer a traditional horizontal graphics card layout.
Verdict: Cooler Master NR200P V2 Mini-ITX Case delivers an 18.25-liter enclosure that fits 357mm graphics cards and 280mm liquid radiators. It provides an efficient layout if you strictly use SFX power supplies and Mini-ITX hardware.
Thermaltake TR100 18.9L Mini-ITX Case
Best for: 280mm liquid cooling in compact SFF builds
- Motherboard Support
- mITX
- Case Type
- SFF
- Radiator Support
- 280mm
- Max GPU Length
- 360mm
- Case Volume
- 18.9 Liters
- Tower Size
- Small Form Factor
The Thermaltake TR100 SFF Mini-ITX Case provides an 18.9-liter dual-chamber layout for compact desktop setups. It supports a 280mm radiator alongside graphics cards up to 360mm in length, making it suitable if you want liquid cooling in a small footprint. You also get clearance for SFX or SFX-L power supplies and 68mm CPU air coolers. It fits builders seeking high-end cooling compatibility and long graphics cards within portable small-form-factor dimensions.
Pros
- Supports 280mm liquid cooling radiators
- Clearance for graphics cards up to 360mm
- Includes a PCIe 4.0 riser cable
- Dual-chamber 18.9-liter layout fits SFX and SFX-L power supplies
Cons
- CPU cooler height is limited to 68mm
- Motherboard compatibility is restricted to Mini-ITX only
Good fit if
- You plan to run a 280mm radiator in an 18.9-liter chassis.
- You use a full-length graphics card measuring up to 360mm.
- You build with an SFX or SFX-L power supply.
Skip if
- You want to use a CPU air cooler taller than 68mm.
- You need compatibility with full-size ATX power supplies or motherboards.
Verdict: Thermaltake TR100 SFF Mini-ITX Case delivers 280mm radiator compatibility and 360mm graphics card clearance inside an 18.9-liter enclosure. It is a capable small-form-factor option if you prioritize liquid cooling and long GPU clearance.
SSUPD Meshroom S V2 SFF Mini-ITX Case
Best for: compact high-airflow builds with large graphics cards
- Motherboard Support
- ITX, MATX, ATX
- Case Type
- Mini-ITX, SFF
- Side Panel
- Mesh
- Radiator Support
- 240mm, 280mm
- Max GPU Length
- 353mm
- Case Volume
- 15L
The SSUPD Meshroom S V2 is a 15-liter small form factor case built with all-around breathable mesh panels. It includes a 200mm PCIe 5.0 riser cable and accommodates full-width four-slot graphics cards up to 152mm wide. You can mount a 240mm or 280mm radiator on the front bracket while running an SFX or ATX power supply. It suits builders who want high-end hardware support and flexible component sizing in a compact volume.
Pros
- Includes a 200mm PCIe 5.0 riser cable
- Supports ATX, MATX, and Mini-ITX motherboards
- Mounts 240mm or 280mm front radiators
- Accommodates four-slot graphics cards up to 152mm wide
- Fits ATX power supplies up to 170mm long
Cons
- Requires an extra-length PCIe riser cable for ATX and MATX motherboards
- CPU cooler height is limited to 74mm
- GPU lengths up to 353mm require optional 30mm to 50mm feet
Good fit if
- You want a 15-liter mesh chassis that fits a 280mm liquid cooling radiator.
- You need a PCIe 5.0 riser setup for a wide four-slot graphics card.
- You want to use a standard ATX power supply up to 170mm in an SFF build.
Skip if
- You plan to install an air cooler taller than 74mm.
- You want to mount an ATX motherboard without purchasing an additional longer riser cable.
Verdict: SSUPD Meshroom S V2 Mini-ITX Case packs broad component compatibility into a 15-liter mesh footprint with 280mm radiator support and an included PCIe 5.0 riser.
SilverStone Small Form Factor Mini-ITX Case
Best for: compact builds using standard ATX power supplies
- Motherboard Support
- Mini-DTX, Mini-ITX
- Case Type
- Small Form Factor
- Radiator Support
- 120mm, 140mm
- Max GPU Length
- 10.5 inches
- Dimensions
- 14 × 12 × 10 inches
- Weight
- 6 pounds
The SilverStone Mini-ITX Small Form Factor Case gives you a compact chassis that fits both Mini-ITX and Mini-DTX motherboards. It supports a full standard ATX power supply alongside graphics cards up to 10.5 inches long. You can install either a 120mm or 140mm single-fan liquid cooler up front and mount 2.5-inch or 3.5-inch drives. It suits you if you want a compact build using standard-sized power hardware.
Pros
- Supports standard ATX power supplies
- Fits Mini-ITX and Mini-DTX motherboards
- Accommodates 120mm or 140mm single-fan AIO liquid coolers
- Accepts expansion cards up to 10.5 inches long
- Mounts both 2.5-inch and 3.5-inch storage drives
Cons
- Maximum expansion card length is 10.5 inches
- Liquid cooling is limited to single-fan 120mm or 140mm sizes
Good fit if
- You want to use a standard ATX power supply in a compact footprint.
- You have an expansion card that measures 10.5 inches or shorter.
- You plan to cool your system with a 120mm or 140mm single-fan liquid cooler.
Skip if
- You need clearance for an expansion card longer than 10.5 inches.
- You plan to install a dual-fan 240mm or 280mm radiator.
Verdict: SilverStone Mini-ITX Small Form Factor Case provides a compact footprint with rare support for full-size ATX power supplies and Mini-DTX boards. It is a solid choice if your expansion card fits within the 10.5-inch clearance limit.
Specifications side by side
| Spec | Cooler Master NR200P MAX V2 Mini-ITX Case | FSP Open Frame Dual Chamber Case | Cooler Master NCORE 100 MAX Mini-ITX Case | Cooler Master NR200P V2 Mini-ITX Case | Thermaltake TR100 18.9L Mini-ITX Case | SSUPD Meshroom S V2 SFF Mini-ITX Case | SilverStone Small Form Factor Mini-ITX Case |
|---|---|---|---|---|---|---|---|
| Motherboard Support | Mini-ITX | EATX, ATX, Mini-ITX | Mini-ITX | Mini-ITX | mITX | ITX, MATX, ATX | Mini-DTX, Mini-ITX |
| Case Type | Small Form Factor | Open Frame | SFF | not specified | SFF | Mini-ITX, SFF | Small Form Factor |
| Side Panel | not specified | not specified | not specified | Tempered Glass or Vented Steel | not specified | Mesh | not specified |
| Radiator Support | 280mm | 360 mm | 120mm | 280mm | 280mm | 240mm, 280mm | 120mm, 140mm |
| Max GPU Length | 357.6mm | not specified | 356mm | 357mm | 360mm | 353mm | 10.5 inches |
| Case Volume | 18.25L | not specified | 15.7L | 18.25L | 18.9 Liters | 15L | not specified |
| Tower Size | not specified | not specified | Small Form Factor | not specified | Small Form Factor | Small Form Factor | Small Form Factor |
| Fan Size | not specified | not specified | 120mm | not specified | not specified | 200mm | not specified |
| Use | not specified | Gaming | not specified | not specified | not specified | Gaming | not specified |
| Connectivity | not specified | not specified | not specified | not specified | not specified | Type-C | not specified |
| Compatible Device | not specified | not specified | not specified | not specified | Radiator | not specified | not specified |
| Dimensions | 14.8 × 7.28 × 11.5 inches | not specified | 6.1 × 18.9 × 8.35 inches | 14.7 × 7.28 × 11.5 inches | not specified | 9.72 × 6.57 × 14.3 inches | 14 × 12 × 10 inches |
| Weight | 17 pounds | not specified | 13.9 pounds | 10.9 pounds | not specified | 6.83 pounds | 6 pounds |
| Width | not specified | 455 millimeters | not specified | not specified | not specified | not specified | not specified |
| Height | not specified | 530 millimeters | not specified | not specified | not specified | not specified | not specified |
| Size | Small Form Factor Mini-ITX Case | not specified | not specified | Mini-ITX | not specified | not specified | not specified |
| Color | Black/Grey | Red | Dark Grey | Black | Matcha Green | PCIE 5.0 200mm(Black) | SG13B-Q-V1 |
| Model | NR200PV2-MCNN85-SL0 | CMT710RED | NR100-MNNN85-SL0 | NR200PV2-KCNN-S00 | CA-11A-00SENN-00 | Meshroom S PCI5 BK | SG13B-Q |
Frequently asked questions
Which NR200P MAX V2 alternative includes a built-in power supply and liquid cooler?
The Cooler Master NCORE 100 MAX provides a bundled power supply and liquid cooler setup. It integrates an 850W ATX 3.0 power supply alongside a 120mm AIO cooler within an expandable 15.7-liter frame. This vertical enclosure supports graphics cards up to 356mm in length, offering an all-in-one alternative if you want integrated core components in a slim desktop footprint.
What is the main difference between the Cooler Master NR200P V2 and the NR200P MAX V2?
The standard Cooler Master NR200P V2 requires you to provide your own SFX power supply and cooling hardware. While it retains the 18.25-liter volume, tempered glass side panel, 280mm radiator support, and 357mm graphics card clearance, it weighs 10.85 pounds without pre-installed parts. In contrast, the MAX V2 arrives pre-configured with a 280mm liquid cooler and an 850W ATX 3.1 unit.
Which compact alternative supports the longest graphics card?
The Thermaltake TR100 offers the longest dedicated graphics card clearance among the compact alternatives, accommodating cards up to 360mm. It features an 18.9-liter chassis that also supports 280mm liquid cooling radiators. This gives you extra room for oversized triple-fan cards compared to the 357.6mm limit of the NR200P MAX V2 or the 356mm limit found on the NCORE 100 MAX.
Can any of these Mini-ITX cases fit a standard ATX power supply?
Yes, the SilverStone SG13B-Q Mini-ITX case accommodates standard full-size ATX power supplies. Most small-form-factor enclosures require dedicated SFX power supplies, but this chassis allows you to use standard hardware alongside Mini-ITX or Mini-DTX motherboards. However, your graphics card length is restricted to 10.5 inches, requiring a shorter GPU than cases like the NR200P MAX V2.
Which alternative offers the smallest volume while still supporting a 280mm radiator?
The SSUPD Meshroom S V2 is the most compact option with 280mm radiator support, measuring approximately 15 liters. Despite its small mesh footprint, it fits 280mm liquid cooling radiators and includes a PCIe 5.0 riser cable. It also features front Type-C connectivity and a lightweight 6.83-pound build, reducing total desktop volume compared to 18.25-liter or 18.9-liter options.
Which Mini-ITX alternative is suitable if you prefer a vertical tower layout?
The Cooler Master NCORE 100 MAX provides a vertical tower layout measuring 8.35 inches wide, 18.93 inches deep, and 6.1 inches long in an expandable 15.7-liter frame. It comes equipped with a 120mm AIO cooler and an 850W ATX 3.0 power supply. This upright orientation takes up minimal desk surface area while still accommodating full-length graphics cards up to 356mm.
What motherboard form factors do these alternative cases support?
All listed alternatives support standard Mini-ITX motherboards, while the SilverStone SG13B-Q adds compatibility for Mini-DTX boards. Mini-ITX measures 170mm by 170mm, fitting the dedicated mounting standoffs across every option. If you select the SilverStone chassis, the internal frame provides the extra vertical space necessary to install two-slot Mini-DTX motherboards alongside standard components.