Looking Beyond the Cooler Master MasterFan Halo2 140mm ARGB? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Cooler Master MasterFan MF140 Halo2 140mm ARGB Gen2 PC case fan provides standard 140mm mounting with updated Gen2 addressable lighting. Its 5.51-inch frame width and standard 0.98-inch thickness fit common chassis locations without clearance issues. It performs reliably if you want a black 140mm cooling fan that matches standard case fan brackets and delivers customizable lighting.
However, your build may require different specifications. You might prefer a white color option, daisy-chain cabling to reduce wire clutter, a hydraulic bearing, or higher speeds reaching up to 2,500 rpm. You may also look for components from other brands like Thermaltake, Lian Li, or Be Quiet to match existing hardware in your setup. The 6 alternatives on this list were chosen because their specifications overlap with the original model. Each fan shares the 140mm form factor and ARGB capability, while offering variations in thickness, rotational speed, connector type, and frame style to suit your specific cooling requirements.
Our top pick: Cooler Master MasterFan Halo2 140mm ARGB Fan.
Comparing Cooler Master Halo2 Alternatives
Cooler Master MasterFan MF140 Halo Duo-Ring ARGB Fan
The Cooler Master MF140 Halo Duo-Ring from Toptekits uses model number MFL-B4DN-15NPA-R1 instead of the Halo2 MFL-B4DN-16NP2-R2 design. You get dual-ring illumination and a stated operating speed reaching up to 1,800 rpm over a 3-pin connector. It matches the original 5.51-inch by 5.51-inch square footprint and 0.98-inch thickness, while weighing 7.05 ounces. You give up the updated ARGB Gen2 protocol found on the Halo2, running standard 5V addressable RGB lighting instead. Choose this option if your PC case needs standard 140mm dimensions with dual-ring illumination and fan speeds up to 1,800 rpm.
Cooler Master MasterFan MF140 Halo ARGB Fan
This Cooler Master MF140 Halo features model MFL-B4DN-15NPA-R1 and provides dual-ring illumination powered by 24 LEDs. It runs across a defined PWM band from 650 rpm to 1,500 rpm with hybrid airflow blade geometry. Its dimensions remain 5.51 inches long, 5.51 inches wide, and 0.98 inches thick, matching the Halo2 frame, though it weighs 7.58 ounces. Compared to the original Halo2, you trade away ARGB Gen2 technology for standard ARGB control. You also operate within a 1,500 rpm maximum ceiling. Pick this model if you want verified 24-LED dual-loop lighting and a moderate 650 to 1,500 rpm speed range for standard 140mm mounts.
be quiet! Light Wings 140mm High-Speed ARGB Fan
The be quiet! Light Wings 140mm High-Speed fan shifts from Cooler Master's platform to model BL075. It delivers a fast 2,500 rpm maximum ceiling, dual-sided ARGB lighting using 18 LEDs, and a rifle bearing rated for 60,000 hours of operation. At 3.53 ounces, it is significantly lighter than the alternatives, while retaining the standard 5.51 by 5.51-inch footprint and 0.98-inch thickness. You give up the Halo2 Gen2 lighting protocol in favor of standard ARGB connectivity. Pick this be quiet! model if you need high rotational speeds up to 2,500 rpm for demanding gaming setups that benefit from increased airflow and dual-sided illumination.
Thermaltake CT140 ARGB White 140mm Fan 2-Pack
The Thermaltake CT140 ARGB comes as a two-fan pack in white rather than a single black fan. It features model CL-F154-PL14SW-A, daisy-chain cable connectors, and a hydraulic bearing. The dimensions are 5.51 inches by 5.51 inches with a 0.98-inch profile, and the package weighs 1 pound. While the original Halo2 provides Gen2 lighting in black, the CT140 uses standard 5V motherboard-synced ARGB and targets radiator installations where linked wiring keeps cable clutter low. You lose the Gen2 ARGB customization of the Halo2. Choose this pack if you are cooling a radiator and need two white 140mm fans with daisy-chain integration.
Lian Li UNI Fan SL-Infinity 140mm ARGB Fan
The Lian Li UNI Fan SL-Infinity 140mm specifies 2.88mmH2O static pressure and 72.7 CFM airflow, alongside zero-RPM operational support. It connects via a single-cable daisy-chain setup that reduces interior wiring. The frame measures 5.52 inches long, 5.59 inches high, and 0.99 inches wide, which is slightly larger than the Halo2 5.51 by 5.51 by 0.98-inch footprint, and it weighs 8.47 ounces. You give up the ARGB Gen2 standard of the Cooler Master unit, relying instead on Lian Li ARGB lighting. Choose this fan if you require 2.88mmH2O pressure, zero-RPM operation, and single-cable wire management.
Cooler Master MF140 Halo² 140mm ARGB Fan
This variant of the Cooler Master MF140 Halo2 carries model number MFL-B4DW-16NP2-R2 and increases speed performance up to 2,050 RPM with dual-loop lighting. It differs significantly in physical dimensions, measuring 7.9 inches wide, 5.8 inches long, and 1.3 inches thick, with a weight of 9.6 ounces. Compared to the baseline 0.98-inch thick Halo2 frame, this version requires extra clearance inside your chassis due to its 1.3-inch thickness and larger overall body. You give up compact clearance compatibility. You should pick this unit if your PC case has sufficient space for a 1.3-inch thick fan and you require fan speeds up to 2,050 RPM.
Quick picks
Our 7 picks
Cooler Master MasterFan Halo2 140mm ARGB Fan
Best for: 140mm builds wanting ARGB Gen2 lighting
- Fan Size
- 140mm
- Lighting Type
- ARGB Gen2
- Dimensions
- 5.51 × 5.51 × 0.98 inches
View on Amazon: Cooler Master MasterFan Halo2 140mm ARGB Fan
The Cooler Master MF140 Halo2 140mm ARGB Fan is a standard-sized 140mm case cooling fan finished in black. It features ARGB Gen2 illumination and measures 5.51 inches wide, 5.51 inches long, and 0.98 inches thick. This model suits you if you need a standard-depth 140mm fan mount with customizable second-generation addressable lighting to match your existing PC case setup.
Pros
- ARGB Gen2 customizable lighting
- Standard 140mm sizing (5.51 x 5.51 inches)
- Standard 0.98-inch mounting thickness
Cons
- Airflow and fan speed ratings not specified in data
- No alternate color options listed
Good fit if
- You need a 140mm black case fan.
- You want ARGB Gen2 lighting hardware for your chassis.
- You have mounts fitted for 0.98-inch fan depth.
Skip if
- You need documented airflow and noise ratings before selecting fans.
- You require a white fan frame for your build.
Verdict: Cooler Master MF140 Halo2 140mm ARGB Fan delivers standard 140mm mounting with updated ARGB Gen2 illumination. It fits PC cases configured for standard 0.98-inch fan depths.
Cooler Master MasterFan MF140 Halo Duo-Ring ARGB Fan
Best for: dual-ring ARGB lighting and wide PWM control
- Fan Size
- 140mm
- Max Fan Speed
- 1,800 rpm
- Lighting Type
- 5V 3-Pin ARGB
- Dimensions
- 5.51 × 5.51 × 0.98 inches
- Weight
- 7.05 ounces
View on Amazon: Cooler Master MasterFan MF140 Halo Duo-Ring ARGB Fan
This 140mm cooling fan features duo-ring addressable RGB illumination powered by 24 individually controlled LEDs. It delivers a dynamic PWM speed range between 650 rpm and 1,800 rpm with a hybrid static pressure blade design. Built-in sound absorbing rubber pads reduce vibration during operation. It suits your build if you want broad speed control and dual-zone lighting using standard 5V 3-pin headers.
Pros
- 24 individually controlled ARGB LEDs across duo-ring lighting
- PWM speed range of 650 rpm to 1,800 rpm
- Hybrid static pressure blade design for radiators or chassis
- Sound-absorbing rubber pads for vibration dampening
Cons
- ARGB controller is not included in the box
- Incompatible with standard 12V 4-pin RGB headers
- Certain Gigabyte motherboards require an adapter cable sold separately
Good fit if
- You have a motherboard with an available 5V 3-pin ARGB header.
- You need a 140mm fan with speeds up to 1,800 rpm for radiators or mesh cases.
- You want dual-ring lighting with 24 addressable LEDs.
Skip if
- You only have 12V 4-pin RGB headers on your motherboard.
- You need a bundled standalone hardware lighting controller.
Verdict: Cooler Master MF140 Halo 140mm ARGB Fan delivers dual-ring lighting and wide PWM performance up to 1,800 rpm. It is a capable cooling option if your setup supports standard 5V addressable headers.
Cooler Master MasterFan MF140 Halo ARGB Fan
Best for: dual-ring RGB lighting on 140mm mounts
- Fan Size
- 140mm
- Max Fan Speed
- 1500 rpm
- Lighting Type
- Addressable RGB
- Dimensions
- 5.51 × 5.51 × 0.98 inches
- Weight
- 7.58 ounces
The Cooler Master MF140 Halo 140mm ARGB Fan provides chassis and radiator cooling using a 140mm frame and hybrid static pressure blades. You get dual-ring illumination powered by 24 addressable RGB LEDs that connect via standard 3-pin headers. Operating across a PWM range of 650 rpm to 1,500 rpm, it lets you balance airflow and sound. It fits your build if you want balanced static pressure and broad motherboard lighting synchronization.
Pros
- Duo-ring lighting with 24 individually controlled 3-pin ARGB LEDs
- PWM speed range spanning 650 rpm to 1,500 rpm
- Hybrid static pressure blade design for radiators and mesh chassis
- Sound-absorbing materials and noise reduction design
Cons
- Maximum rotational speed tops out at 1,500 rpm
- Single-fan unit without an included dedicated hardware controller
Good fit if
- You need a 140mm PWM fan that runs between 650 and 1,500 rpm.
- You want 24-LED dual-ring ARGB lighting controlled via motherboard sync.
Skip if
- You require fan speeds exceeding 1,500 rpm for high-resistance cooling.
- You prefer a non-LED fan or a proprietary multi-fan connection system.
Verdict: Cooler Master MF140 Halo 140mm ARGB Fan delivers capable hybrid airflow and dual-ring 24-LED illumination across a 650 to 1,500 rpm PWM band. It is a solid pick for standard 140mm case mounts and radiators needing motherboard-synced lighting.
be quiet! Light Wings 140mm High-Speed ARGB Fan
Best for: high-speed cooling with dual-sided ARGB lighting
- Fan Size
- 140mm
- Max Fan Speed
- 2,500 rpm
- Noise Level
- 31dB(A)
- Connector Type
- PWM
- Bearing Type
- Rifle-bearing
- Lighting Type
- ARGB
View on Amazon: be quiet! Light Wings 140mm High-Speed ARGB Fan
This 140mm PWM high-speed fan from Be Quiet delivers rotational speeds up to 2,500 rpm with a maximum noise level of 31 dB(A). It features nine silence-optimized blades, a rifle bearing rated for 60,000 operating hours, and 18 ARGB LEDs spanning both front and rear rings. If you want high rotational speeds paired with dual-sided illumination in a standard case mount, this serves your setup.
Pros
- Maximum speed of 2,500 rpm with PWM control
- 18 ARGB LEDs on both front and rear rings
- Rifle-bearing rated for 60,000 operating hours
- Nine silence-optimized fan blades
Cons
- Reaches 31 dB(A) at maximum operating speed
- Sold as a single-fan pack
Good fit if
- You want a 140mm fan capable of speeds up to 2,500 rpm.
- You need dual-sided ARGB lighting visible from both front and rear.
- You prefer a fan with a rifle bearing rated for 60,000 hours.
Skip if
- You need multiple fans packaged together in a single kit.
- You want lower peak noise levels than 31 dB(A).
Verdict: Be Quiet Light Wings 140mm PWM High-Speed Fan combines a 2,500 rpm ceiling with dual-sided 18-LED ARGB lighting and a 60,000-hour rifle bearing. It provides high cooling throughput when your system requires strong airflow.
Thermaltake CT140 ARGB White 140mm Fan 2-Pack
Best for: radiator setups needing daisy-chain cable management
- Fan Size
- 140mm
- Max Fan Speed
- 1500 RPM
- Bearing Type
- Hydraulic Bearing
- Lighting Type
- ARGB
- Compatible Device
- Radiator
- Dimensions
- 5.51 × 0.98 × 5.51 inches
View on Amazon: Thermaltake CT140 ARGB White 140mm Fan 2-Pack
The Thermaltake CT140 ARGB is a white 140mm fan pack built for radiator cooling and case ventilation. You get a seven-blade design tuned for airflow and static pressure, paired with a hydraulic bearing that tops out at 1500 RPM under PWM control. Integrated daisy-chain cabling keeps wire clutter minimal across multi-fan radiator mounts. Each fan features nine addressable LEDs managed by 5V motherboard software, making this pair well suited for clean, coordinated white builds.
Pros
- Daisy-chain cable design minimizes wire runs and port usage
- PWM speed control reaching up to 1500 RPM
- Hydraulic bearing with integrated anti-vibration mounting
- Nine addressable LEDs supporting 5V motherboard sync
Cons
- Top rotational speed is limited to 1500 RPM
- No standalone hardware lighting controller included in the pack
- Packaged strictly as a two-fan bundle
Good fit if
- You need 140mm fans specifically designated for radiator installations.
- You want daisy-chain connections to reduce cable bulk along radiator brackets.
- You have a motherboard with an available 5V ARGB header.
Skip if
- You only require a single 140mm fan for your case.
- You need fan speeds exceeding 1500 RPM for high-airflow demands.
- You lack a 5V ARGB header and need an included manual RGB controller.
Verdict: Thermaltake CT140 ARGB 140mm Fan 2-Pack pairs radiator-oriented blade pressure with daisy-chain cabling and a quiet hydraulic bearing. It is a practical, clutter-free choice for builders synchronizing dual-fan radiator cooling through standard 5V motherboard headers.
Lian Li UNI Fan SL-Infinity 140mm ARGB Fan
Best for: clean cable management and high-pressure airflow
- Fan Size
- 140mm
- Max Airflow
- 72.7 CFM
- Static Pressure
- 2.88mmH2O
- Noise Level
- 28dB
- Bearing Type
- Magnetic Fluid Dynamic Bearing
- Lighting Type
- ARGB
The Lian Li UNI Fan SL-Infinity 140mm ARGB Fan is a 140mm case fan designed for high-airflow setups and streamlined cabling. It delivers up to 72.7 CFM of airflow and 2.88mmH2O static pressure with a top noise level of 28dB. Its interlocking daisy-chain system allows you to run up to four fans from a single cable. If you want strong cooling with 40 addressable LEDs, this fits your build.
Pros
- Delivers 72.7 CFM maximum airflow and 2.88mmH2O static pressure
- Daisy-chain pin-to-pad design links up to 4 fans on a single cable
- Features 40 ARGB LEDs with dual-zone lighting on blades and frame
- Magnetic Fluid Dynamic Bearing includes start/stop temperature mode
Cons
- Sold as a single pack without an included controller
- Reaches 28dB at maximum operating speed
Good fit if
- You want to minimize chassis cable clutter using pin-to-pad daisy-chaining.
- You need high static pressure of 2.88mmH2O for radiator or intake mounting.
- You prefer a fan that can stop completely during low-temperature operation.
Skip if
- You need a multi-fan bundle that includes a dedicated controller.
- You require an ultra-quiet fan rated below 28dB at full speed.
Verdict: Lian Li UNI Fan SL-Infinity 140mm ARGB Fan delivers solid 2.88mmH2O static pressure and 72.7 CFM airflow alongside a tidy single-cable daisy-chain connection. It provides extensive ARGB lighting and zero-RPM capability for builds requiring clean wire management.
Cooler Master MF140 Halo² 140mm ARGB Fan
Best for: high-speed 140mm dual-loop ARGB cooling
- Fan Size
- 140mm
- Max Fan Speed
- 2,050 RPM
- Lighting Type
- ARGB
- Dimensions
- 5.8 × 7.9 × 1.3 inches
- Weight
- 9.6 ounces
This is a 140mm PWM case fan designed for both air cooling and liquid cooling setups. It features dual-loop ARGB rings for lighting and operates at speeds up to 2,050 RPM via an upgraded driver IC. Its hybrid frame houses enlarged fan blades to move air efficiently. You will find this fan suitable if you need high-speed 140mm airflow combined with addressable RGB lighting for your chassis or radiator.
Pros
- Maximum rotational speed of 2,050 RPM
- Dual-loop ARGB lighting rings
- Enlarged fan blades on a hybrid frame design
- Upgraded driver IC designed to minimize noise
Cons
- Listed thickness of 1.3 inches exceeds standard 25mm fan depth
- Exact CFM airflow and decibel noise ratings are not listed
Good fit if
- You need a 140mm fan capable of speeds up to 2,050 RPM.
- You want dual-loop addressable RGB lighting rings.
- You have clearance for a 1.3-inch thick fan.
Skip if
- You require a multi-pack bundle in the 140mm size.
- You need a standard 25mm slim profile for tight clearances.
Verdict: Cooler Master MF140 Halo2 140mm ARGB Fan delivers up to 2,050 RPM with dual-loop lighting for cases that can accommodate its 1.3-inch thickness.
Specifications side by side
| Spec | Cooler Master MasterFan Halo2 140mm ARGB Fan | Cooler Master MasterFan MF140 Halo Duo-Ring ARGB Fan | Cooler Master MasterFan MF140 Halo ARGB Fan | be quiet! Light Wings 140mm High-Speed ARGB Fan | Thermaltake CT140 ARGB White 140mm Fan 2-Pack | Lian Li UNI Fan SL-Infinity 140mm ARGB Fan | Cooler Master MF140 Halo² 140mm ARGB Fan |
|---|---|---|---|---|---|---|---|
| Fan Size | 140mm | 140mm | 140mm | 140mm | 140mm | 140mm | 140mm |
| Max Fan Speed | not specified | 1,800 rpm | 1500 rpm | 2,500 rpm | 1500 RPM | not specified | 2,050 RPM |
| Max Airflow | not specified | not specified | not specified | not specified | not specified | 72.7 CFM | not specified |
| Static Pressure | not specified | not specified | not specified | not specified | not specified | 2.88mmH2O | not specified |
| Noise Level | not specified | not specified | not specified | 31dB(A) | not specified | 28dB | not specified |
| Connector Type | not specified | not specified | not specified | PWM | not specified | not specified | not specified |
| Bearing Type | not specified | not specified | not specified | Rifle-bearing | Hydraulic Bearing | Magnetic Fluid Dynamic Bearing | not specified |
| Lighting Type | ARGB Gen2 | 5V 3-Pin ARGB | Addressable RGB | ARGB | ARGB | ARGB | ARGB |
| Use | not specified | not specified | not specified | Gaming | not specified | not specified | not specified |
| Lighting | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Compatible Device | not specified | not specified | not specified | not specified | Radiator | not specified | not specified |
| Dimensions | 5.51 × 5.51 × 0.98 inches | 5.51 × 5.51 × 0.98 inches | 5.51 × 5.51 × 0.98 inches | 5.51 × 5.51 × 0.98 inches | 5.51 × 0.98 × 5.51 inches | 5.52 × 0.99 × 5.59 inches | 5.8 × 7.9 × 1.3 inches |
| Weight | not specified | 7.05 ounces | 7.58 ounces | 3.53 ounces | 1 pounds | 8.47 ounces | 9.6 ounces |
| Size | 140mm | 140mm MF140 Black | 140mm ARGB | 1 x 140mm | 140mm | 140mm | 140mm ARGB |
| Color | Black | Black | Black | Black | White | Black | Black |
| Model | MFL-B4DN-16NP2-R2 | MFL-B4DN-15NPA-R1 | MFL-B4DN-15NPA-R1 | BL075 | CL-F154-PL14SW-A | UF-SLIN140-1B | MFL-B4DW-16NP2-R2 |
Frequently asked questions
Which 140mm ARGB fan delivers the highest maximum rotational speed?
The be quiet! Light Wings 140mm High-Speed fan delivers the highest maximum rotational speed at 2,500 rpm. You get dual-sided ARGB lighting driven by 18 LEDs alongside a rifle bearing rated for 60,000 hours of operation. Its standard 0.98-inch thickness fits standard 140mm case locations when your PC build demands high-speed airflow.
How does the thickness of Cooler Master model MFL-B4DW-16NP2-R2 compare to standard fans?
Cooler Master model MFL-B4DW-16NP2-R2 measures 1.3 inches thick, which is deeper than standard 0.98-inch fans. You must verify clearance inside your PC case before mounting it. This model provides dual-loop ARGB illumination, operates at speeds up to 2,050 RPM, and weighs 9.6 ounces across its 7.9 by 5.8-inch frame dimensions.
Which alternative offers daisy-chain cabling designed for liquid cooling radiators?
The Thermaltake CT140 ARGB 2-Pack features daisy-chain cabling specifically configured for radiator setups. You can link both fans together to minimize cable clutter around radiator brackets and sync illumination via standard 5V motherboard headers. Each white fan uses a hydraulic bearing and measures 5.51 by 5.51 inches with a 0.98-inch profile.
What airflow and pressure specifications does the Lian Li UNI Fan SL-Infinity 140mm provide?
The Lian Li UNI Fan SL-Infinity 140mm produces 72.7 CFM of airflow and 2.88mmH2O of static pressure. You also get a single-cable daisy-chain setup to simplify cable routing, alongside zero-RPM mode support. The fan frame measures 5.59 inches tall, 5.52 inches long, and 0.99 inches wide, with a total weight of 8.47 ounces.
How many LEDs are integrated into the Cooler Master MF140 Halo fan?
The Cooler Master MasterFan MF140 Halo ARGB model MFL-B4DN-15NPA-R1 incorporates 24 addressable LEDs across its dual-ring lighting design. You can synchronize the lighting effects directly through compatible motherboard software. It operates across a PWM range between 650 and 1,500 rpm, delivering hybrid airflow while fitting into standard 5.51 by 5.51 by 0.98-inch fan mounts.
Which option should you consider if your build requires a white 140mm fan?
You should look at the Thermaltake CT140 ARGB 2-Pack if you need white PC case fans. This package includes two white fans engineered with hydraulic bearings for quieter operation on radiators and case mounts. Each unit fits standard chassis openings with dimensions of 5.51 by 5.51 by 0.98 inches and connects to 5V addressable headers.