Looking Beyond the Cooler Master MasterFan MF120 Halo ARGB? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you want different cooling features or frame sizes, evaluating cooler master masterfan mf120 halo argb alternatives makes practical sense. The original Cooler Master MF120 Halo provides 47.2 CFM airflow, 1.6 mmH2O static pressure, and 24 dual-ring addressable RGB LEDs. It also features sound-absorbing materials rated between 6 and 30 dBA, along with a smart jam protection sensor. Even so, your build might demand different specifications. You may need a slimmer 15mm frame for tight clearance, alternative colors like white or pink, or multi-fan packs that include dedicated hardware controller hubs.
This guide highlights 6 options selected because their specifications directly overlap with the baseline MF120 Halo design. Every fan on this list features a standard 120mm mount format and addressable RGB illumination. Some alternatives match the original duo-ring layout and PWM speed regulation, while others supply specialized attributes like hydraulic bearings, remote controllers, or compact low-profile depths. Comparing these published airflow ratings, noise levels, and dimensions helps you select the proper cooling unit for your specific PC chassis requirements.
Our top pick: Cooler Master MF120 Halo Dual-Ring ARGB Fan.
How Each Alternative Compares
EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
The EZDIY-FAB Moonlight kit provides six 120mm fans along with an included control hub and remote, giving you immediate multi-fan coverage for your chassis. In contrast, the Cooler Master MF120 Halo comes as a single unit or smaller pack and relies on direct motherboard software headers. The trade-off comes down to airflow volume. The EZDIY-FAB fans push 26.16 CFM, which is notably lower than the 47.2 CFM produced by the MF120 Halo hybrid blades. The EZDIY-FAB also does not list jam protection sensors. You should pick this pack if you need to fill several fan mounts at once with dedicated hardware controls and do not need higher CFM output.
Cooler Master MF120 Halo 120mm ARGB Fan
This Toptekits listing shares the same MFL-B2DN-18NPA-R1 model designation as the base Cooler Master MF120 Halo, but it highlights specific operational parameters. You get a 4-pin PWM connector paired with 1,800 RPM rotational speed and 24 duo-ring LEDs compatible with 5V 3-pin motherboard headers. The physical specifications note a weight of 7.05 ounces, slightly heavier than the 6.35 ounces listed on the primary baseline model. Cooling pressure and noise damping remain aligned with the core Halo platform. You should pick this specific listing if you want confirmed 4-pin PWM control and 1,800 RPM operation tailored for standard 5V addressable RGB motherboard pinouts.
Vetroo 120mm Pink ARGB Fans 3-Pack
The Vetroo 3-pack sets itself apart immediately with an all-pink frame and blades, whereas the Cooler Master MF120 Halo uses a standard dark housing. Vetroo includes three fans featuring hydraulic bearings and PWM speed regulation, weighing 5.29 ounces per unit. It syncs lighting directly to your motherboard, matching the addressable RGB capability of the original. However, Vetroo does not provide published static pressure or airflow figures like the MF120 Halo's 1.6 mmH2O and 47.2 CFM ratings, nor does it list jam protection sensors. You should pick this set if you are assembling a color-coordinated pink build that needs three PWM-controlled fans with hydraulic bearings.
Ocypus Gamma F12 120mm ARGB Fan
The Ocypus Gamma F12 replaces the dual-ring LED design of the MF120 Halo with a dual-zone infinity mirror aesthetic across the center hub and outer frame. It includes cable daisy-chaining support, allowing you to link fans together cleanly, which the standard Halo wiring does not emphasize. Both fans share standard 120mm by 25mm dimensions, though the Ocypus is slightly heavier at 6.7 ounces compared to 6.35 ounces. The Gamma F12 omits published CFM and static pressure measurements, leaving the MF120 Halo as the verified option for 47.2 CFM output. Pick the Gamma F12 if you prioritize infinity mirror visuals and streamlined cable chaining.
ID-COOLING 120mm Slim ARGB Fan
The ID-COOLING NO-12015-XT-ARGB is built specifically for compact clearances, measuring just 0.63 inches (15mm) thick and weighing 3.53 ounces. In comparison, the Cooler Master MF120 Halo has a standard 0.98-inch (25mm) profile and weighs 6.35 ounces. While both provide addressable RGB lighting, the slimmer profile of the ID-COOLING fan gives up the specialized dual-ring 24-LED layout and the hybrid blade design of the Halo. Specific airflow and pressure ratings are not detailed for the ID-COOLING unit. You should choose this slim alternative if you are assembling a small-form-factor or ITX system where a standard 25mm-thick fan cannot physically clear your motherboard or GPU.
upHere 120mm White Hydraulic Bearing ARGB Fan
The upHere NT1206 fan comes in an all-white color scheme, contrasting with the dark frame of the Cooler Master MF120 Halo. It features a hydraulic bearing with a 40,000-hour operational rating and includes a dedicated control hub and wireless remote that handles both lighting and fan speeds up to 1,800 RPM. The MF120 Halo relies instead on direct motherboard software synchronization and includes a jam-protection sensor. While the MF120 Halo specifies 47.2 CFM airflow and 1.6 mmH2O pressure, upHere does not list precise CFM figures. Choose the upHere fan if you want a white aesthetic with a bundled hardware controller and remote.
Quick picks
Our 7 picks
Cooler Master MF120 Halo Dual-Ring ARGB Fan
Best for: dual-ring ARGB lighting and balanced airflow
- Fan Size
- 120 mm
- Max Airflow
- 47.2 CFM ± 10%
- Static Pressure
- 1.6 mmH2O ± 10%
- Noise Level
- 30 dBA
- Lighting Type
- Addressable RGB
- Dimensions
- 4.72 × 4.72 × 0.98 inches
This 120mm case fan features dual-loop addressable RGB lighting powered by 24 individual LEDs across two rings. It pushes up to 47.2 CFM of airflow and provides 1.6 mmH2O static pressure via a hybrid blade design. Operating noise ranges between 6 and 30 dBA. If you want balanced case airflow alongside dual-zone lighting compatible with major motherboard software, this standard 25mm thick fan fits your standard mounts.
Pros
- Dual-loop lighting with 24 individually controlled ARGB LEDs
- Smart fan sensor stops operation to prevent cable jam damage
- Delivers 47.2 CFM airflow and 1.6 mmH2O static pressure
- Includes addressable RGB connector clips for secure connections
Cons
- Maximum noise level reaches 30 dBA at full speed
- Standard 0.98-inch thickness does not fit slim-clearance locations
Good fit if
- You need dual-ring ARGB lighting that syncs with ASUS, ASRock, or MSI motherboard software.
- You want built-in jam protection sensors to prevent blade damage from stray cables.
- You require a hybrid blade design that provides both airflow and static pressure.
Skip if
- You need a low-profile fan thinner than standard 0.98-inch depth.
- You require maximum sound levels strictly below 30 dBA.
Verdict: Cooler Master MF120 Halo 120mm ARGB Fan delivers a reliable balance of 47.2 CFM airflow and 1.6 mmH2O pressure with dual-ring lighting. It is a dependable baseline choice for standard mounts requiring motherboard-controlled illumination.
EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
Best for: Multi-fan case setups wanting included hub controls
- Fan Size
- 120 mm
- Max Airflow
- 26.16 CFM
- Bearing Type
- Self-lubricated
- Lighting Type
- ARGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
View on Amazon: EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
This six-pack of 120mm case fans provides tri-aperture addressable RGB lighting alongside dedicated speed and light management. Each fan delivers up to 26.16 CFM of airflow using a self-lubricated bearing and eight anti-vibration pads. The included Fan Hub X and 21-key remote control fan speed and lighting modes directly, or you can synchronize effects through standard 5V three-pin motherboard ARGB headers. It suits you if you need a full set of synced lighting.
Pros
- Includes 21-key remote and Fan Hub X for lighting and speed adjustments
- Compatible with 5V 3-pin motherboard ARGB headers
- Eight anti-vibration rubber pads fitted to each fan frame
- Self-lubricated bearing construction
Cons
- Airflow tops out at 26.16 CFM
- Included Fan Hub X strictly limits capacity to six fans and 5A current
Good fit if
- You need six 120mm ARGB fans in one bundle.
- You want handheld remote control alongside motherboard ARGB synchronization.
Skip if
- You need high airflow exceeding 26.16 CFM.
- You plan to connect more than six fans to a single hub.
Verdict: EZDIY-FAB Moonlight 120mm ARGB Fan 6-Pack delivers multi-fan lighting coverage with an included remote and hub, though its 26.16 CFM airflow is modest.
Cooler Master MF120 Halo 120mm ARGB Fan
Best for: systems with 5V 3-pin ARGB headers
- Fan Size
- 120mm
- Max Fan Speed
- 1,800 rpm
- Lighting Type
- 5V 3-Pin ARGB
- Connector Type
- 4-Pin
- Dimensions
- 0.98 × 4.72 × 4.72 inches
- Weight
- 7.05 ounces
This 120mm case fan features duo-ring addressable RGB lighting powered by 24 individually controlled LEDs. It uses a 4-pin PWM connection to adjust speeds between 650 rpm and 1,800 rpm, paired with sound-absorbing rubber pads and a hybrid static pressure blade design. If you need targeted airflow or radiator cooling alongside 5V 3-pin motherboard synchronization, this standalone unit fits setups requiring precise thermal control without bundled accessories.
Pros
- PWM dynamic speed adjustment from 650 rpm to 1,800 rpm
- Duo-ring ARGB lighting with 24 individually controlled LEDs
- Hybrid static pressure blade design for radiators and mesh panels
- Sound-absorbing rubber pads installed for vibration damping
Cons
- Incompatible with 12V 4-pin standard RGB headers
- Does not include an ARGB controller
- Adapter cable for 3-position Gigabyte headers sold separately
Good fit if
- You have an available 5V 3-pin ARGB header on your motherboard.
- You want PWM fan control spanning from 650 rpm to 1,800 rpm.
- You need a hybrid static pressure fan for radiators or low-noise mesh cases.
Skip if
- You only have 12V 4-pin RGB headers on your motherboard.
- You require an included ARGB controller to manage lighting.
- You use a Gigabyte motherboard requiring a 3-position adapter out of the box.
Verdict: Toptekits 120mm MF120 Halo ARGB Fan delivers PWM speeds up to 1,800 rpm and 24 duo-ring LEDs for 5V ARGB setups. It provides targeted static pressure cooling if your motherboard already supports 3-pin addressable lighting.
Vetroo 120mm Pink ARGB Fans 3-Pack
Best for: Pink-themed chassis builds needing ARGB synchronization
- Fan Size
- 120mm
- Connector Type
- PWM
- Bearing Type
- Hydraulic
- Lighting Type
- 5V 3-Pin ARGB
- Dimensions
- 2.8 × 5.7 × 10.5 inches
- Weight
- 5.29 ounces
This Vetroo pack gives you three 120mm pink case fans with addressable RGB lighting. You get PWM speed control to regulate airflow based on internal chassis temperatures. Each unit features nine blades, hydraulic bearings rated for 50,000 hours, and eight rubber vibration pads to reduce turbulence. It suits you if you need color-matched pink hardware with standard 5V 3-pin motherboard lighting control.
Pros
- 5V 3-pin motherboard ARGB synchronization
- PWM automatic fan speed adjustment
- Hydraulic bearings with 50,000-hour service life
- Eight vibration-damping rubber pads per fan
Cons
- No CFM airflow or dBA noise ratings listed
- Requires 5V 3-pin ARGB header; no standalone controller listed
Good fit if
- You build a pink-themed PC chassis.
- You have a motherboard with a 5V 3-pin ARGB header.
- You need PWM temperature-managed fan speeds across three mounts.
Skip if
- You lack 5V 3-pin addressable RGB headers on your motherboard.
- You prefer neutral black or white case fans.
Verdict: Vetroo 120mm Pink ARGB Case Fans 3-Pack provides PWM speed regulation, hydraulic bearings, and motherboard-synced lighting in a distinct pink aesthetic.
Ocypus Gamma F12 120mm ARGB Fan
Best for: Dual-zone infinity mirror setups using PWM control
- Fan Size
- 120mm
- Connector Type
- 4-Pin PWM
- Lighting Type
- ARGB
- Blade Direction
- Forward
- Dimensions
- 4.72 × 0.98 × 4.72 inches
- Weight
- 6.7 ounces
The Ocypus Gamma F12 is a 120mm PWM case fan with 24 ARGB LEDs arranged across a central infinity mirror and side frame lighting. It uses a 9-blade forward-flow layout, 4-pin speed control, and corner rubber pads to control vibration. You can daisy-chain up to three fans per connection. This single fan suits your build if you want direct motherboard lighting synchronization with dual-zone illumination.
Pros
- Dual-zone lighting with center infinity mirror and synchronized side accents
- Supports cable daisy-chaining for up to 3 fans
- 4-pin PWM control for dynamic speed adjustment
- Corner rubber damping pads reduce vibration and resonance
Cons
- Daisy-chain support is limited to a maximum of 3 fans
- Pack includes only a single fan rather than a multi-unit bundle
Good fit if
- You want an infinity mirror hub paired with side frame illumination.
- You need 4-pin PWM speed control on a standard 120mm forward-blade fan.
- You plan to daisy-chain up to three fans on a single header line.
Skip if
- You need an all-in-one multi-pack to fill out your entire PC case.
- You intend to daisy-chain more than three fans together on one cable run.
Verdict: Ocypus Gamma F12 120mm Infinity Mirror Fan combines 4-pin PWM speed control with dual-zone ARGB lighting across its center mirror and frame. It gives you cable daisy-chaining and corner rubber damping in a single 120mm form factor.
ID-COOLING 120mm Slim ARGB Fan
Best for: space-constrained ITX and low-profile PC builds
- Fan Size
- 120mm
- Max Fan Speed
- 2, 000 rpm
- Max Airflow
- 54.6CFM
- Noise Level
- 13.8~31.2dB(A)
- Connector Type
- PWM
- Lighting Type
- 5V 3PIN ARGB
This ID-COOLING 120mm fan features a slim 15mm profile designed for compact enclosures and low-clearance coolers. You get 5V 3-pin addressable RGB motherboard synchronization alongside PWM speed control. Operating speeds range from 500 rpm to 2,000 rpm, delivering up to 54.6 CFM of airflow at noise levels between 13.8 and 31.2 dB(A). It suits you if you need illuminated cooling inside tight small-form-factor cases.
Pros
- Slim 15mm thickness fits tight clearances
- PWM speed control ranges from 500 to 2,000 rpm
- Delivers up to 54.6 CFM of airflow
- Standard 5V 3-pin ARGB motherboard synchronization
Cons
- Peak noise reaches 31.2 dB(A) at maximum speed
- Requires a 5V 3-pin ARGB header with no dedicated controller listed
Good fit if
- You build in space-restricted ITX or HTPC cases requiring a 15mm fan thickness.
- You want dynamic PWM fan speeds between 500 and 2,000 rpm.
- You have an open 5V 3-pin ARGB header on your motherboard.
Skip if
- You want sub-30 dB(A) sound levels at full speed.
- You lack a compatible 5V 3-pin ARGB connection on your motherboard.
Verdict: ID-COOLING 120mm Slim ARGB Case Fan provides controllable airflow and addressable lighting within a compact 15mm frame. It is an effective option when standard 25mm fans exceed your clearance limits.
upHere 120mm White Hydraulic Bearing ARGB Fan
Best for: white builds needing remote-controlled hydraulic cooling
- Fan Size
- 120mm
- Max Fan Speed
- 1800RPM
- Connector Type
- 4-Pin PWM
- Bearing Type
- Hydraulic
- Lighting Type
- 5V 3PIN ARGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
View on Amazon: upHere 120mm White Hydraulic Bearing ARGB Fan
The upHere 120mm White ARGB Case Fan provides up to 1800 RPM of rotational speed using a nine-blade layout and a hydraulic bearing rated for 40,000 hours. It connects via standard 5V 3-pin ARGB headers for motherboard synchronization and includes a dedicated hub and remote. You will find it suits white PC builds requiring manual speed adjustments without relying solely on motherboard software.
Pros
- Hydraulic bearing with an operational lifespan up to 40,000 hours
- Reaches rotational speeds up to 1800 RPM via a nine-blade design
- Supports standard 5V 3-pin ARGB motherboard synchronization
- Bundled with a dedicated hub and handheld remote control
Cons
- Fan speed is controlled exclusively through the included remote
- Incompatible with 12V 4-pin RGB motherboard headers
Good fit if
- You are assembling an all-white computer chassis.
- You prefer using a physical remote and hub to regulate lighting and fan speeds.
- You want a hydraulic bearing fan with up to 1800 RPM maximum output.
Skip if
- You need your motherboard to manage fan curves dynamically via software.
- Your setup only offers legacy 12V 4-pin RGB headers.
Verdict: upHere 120mm White ARGB Case Fan pairs a 40,000-hour hydraulic bearing with remote-based speed and lighting control for white-themed builds. It delivers up to 1800 RPM of cooling through an included control hub.
Specifications side by side
| Spec | Cooler Master MF120 Halo Dual-Ring ARGB Fan | EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack) | Cooler Master MF120 Halo 120mm ARGB Fan | Vetroo 120mm Pink ARGB Fans 3-Pack | Ocypus Gamma F12 120mm ARGB Fan | ID-COOLING 120mm Slim ARGB Fan | upHere 120mm White Hydraulic Bearing ARGB Fan |
|---|---|---|---|---|---|---|---|
| Fan Size | 120 mm | 120 mm | 120mm | 120mm | 120mm | 120mm | 120mm |
| Max Fan Speed | not specified | not specified | 1,800 rpm | not specified | not specified | 2, 000 rpm | 1800RPM |
| Max Airflow | 47.2 CFM ± 10% | 26.16 CFM | not specified | not specified | not specified | 54.6CFM | not specified |
| Static Pressure | 1.6 mmH2O ± 10% | not specified | not specified | not specified | not specified | not specified | not specified |
| Noise Level | 30 dBA | not specified | not specified | not specified | not specified | 13.8~31.2dB(A) | not specified |
| Connector Type | not specified | not specified | not specified | PWM | 4-Pin PWM | PWM | 4-Pin PWM |
| Bearing Type | not specified | Self-lubricated | not specified | Hydraulic | not specified | not specified | Hydraulic |
| Lighting Type | Addressable RGB | ARGB | 5V 3-Pin ARGB | 5V 3-Pin ARGB | ARGB | 5V 3PIN ARGB | 5V 3PIN ARGB |
| Blade Direction | not specified | not specified | not specified | not specified | Forward | not specified | not specified |
| Lighting | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Dimensions | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 0.98 × 4.72 × 4.72 inches | 2.8 × 5.7 × 10.5 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.63 inches | 4.72 × 0.98 × 4.72 inches |
| Weight | 6.35 ounces | not specified | 7.05 ounces | 5.29 ounces | 6.7 ounces | 3.53 ounces | not specified |
| Size | 120 | 6 Pack | 120mm MF120 | 120mm-HDB | Gamma F12 Infinity Mirror - Forward Blade - 1 Pack | not specified | NT1206 SERIES |
| Color | ARGB | not specified | MF120 HALO | Pink | Black ARGB | black | WHITE |
| Model | MFL-B2DN-18NPA-R1 | US-rgb slim fan with hub X-5P | MFL-B2DN-18NPA-R1 | SA-120 | Gamma F12 Elite BK ARGB | NO-12015-XT-ARGB | NT1206-6-US |
Frequently asked questions
Which alternative fits inside low-clearance small form factor cases?
The ID-COOLING NO-12015-XT-ARGB fits best when you have minimal chassis clearance. While standard 120mm fans measure roughly 25mm in thickness, this model features a slim 15mm frame height. That lower profile gives you extra clearance next to tight Mini-ITX components, power supplies, or compact radiators while maintaining addressable RGB lighting.
Are there themed color alternatives to the standard black MF120 Halo?
Yes, you can choose models designed for specific color themes. The Vetroo 3-Pack provides a distinct pink frame and blades with hydraulic bearings and PWM speed control. If you are assembling an all-white build, the upHere NT1206 model features a white frame paired with a 40,000-hour hydraulic bearing and an included control hub.
Which alternative offers an infinity mirror effect instead of halo rings?
The Ocypus Gamma F12 offers an infinity mirror aesthetic instead of outer dual-ring lighting. It incorporates dual-zone addressable RGB lighting across both the center mirror and outer frame. The fan also utilizes 4-pin PWM speed control, cable daisy-chaining capability to streamline wiring, and built-in corner rubber damping to reduce chassis vibration.
What motherboard headers are required to run these ARGB alternatives?
Most of these alternatives require a standard 5V 3-pin addressable RGB motherboard header for synchronized lighting. For fan rotation, models such as the Toptekits MF120 Halo and Ocypus Gamma F12 utilize 4-pin PWM connectors to manage motor speeds. Options with standalone hubs, like the upHere kit, allow control via dedicated remotes as well.
Do these alternatives come in multi-packs with fan hubs?
Several options come in multi-packs bundled with hardware controls. The EZDIY-FAB Moonlight provides a 6-pack setup complete with an included hub and remote control. Similarly, the upHere NT1206 series comes with its own control hub to operate speeds up to 1,800 RPM, whereas single units like the Ocypus Gamma F12 connect individually.
What bearing types are used in these alternative case fans?
Several alternatives in this selection feature hydraulic bearings for reliable operation. Both the Vetroo 3-Pack and the upHere NT1206 utilize hydraulic bearing assemblies, with the upHere model rated for a 40,000-hour operational lifespan. Hydraulic bearings reduce internal friction compared to basic sleeve designs, ensuring steady rotation across speeds reaching up to 1,800 RPM.
How do you reduce cable clutter when installing these alternatives?
You can reduce cable clutter by choosing fans that support daisy-chaining or bundled control hubs. The Ocypus Gamma F12 features cable daisy-chaining, letting you connect fans sequentially before routing one line to your motherboard. Alternatively, multi-packs from EZDIY-FAB and upHere use centralized control hubs so you route fan connections to a single rear-mounted unit.