Uxcell 200mm AC Dual Ball Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for uxcell cooling fan 200mm x alternatives to replace or complement the Uxcell 200mm AC Dual Ball Bearing Fan. This original unit delivers high airflow at 2500 RPM using dual ball bearings and AC 220V/240V power. It is built for industrial or specialized cooling setups where maximum ventilation outweighs noise concerns. The 200x200x60mm frame supports heavy-duty air movement in dense environments.
However, you might want something else. You may need PWM control, lower noise, or different voltage requirements. Some users prefer sleeve or hydraulic bearings for quieter operation. Others need thinner profiles for compact cases. The alternatives in this list were chosen because their specs overlap with the original. Each option shares the 200mm size but varies in thickness, bearing type, and electrical needs. This guide compares 6 similar picks to help you find the right fit for your specific cooling demands.
How each alternative compares
Thermaltake Pure 20 200mm Case Fan
The Thermaltake Pure 20 uses a sleeve bearing instead of the Uxcell dual ball design. This changes the maintenance profile, as sleeve bearings generally do not require the same long-term lubrication considerations as dual ball units. It features a thinner 30mm frame compared to the Uxcell 60mm depth, which may fit tighter spaces. While the Uxcell targets high airflow for AC power systems, this Thermaltake option focuses on static pressure. It lacks PWM control, similar to the original, but offers a different airflow characteristic suited for restricted paths. You should choose this if you need high static pressure in a standard DC setup rather than raw AC airflow.
Phanteks 200mm High Airflow Case Fan
The Phanteks fan prioritizes quiet operation over the high-speed performance of the Uxcell unit. It uses a high static pressure design with a 25mm thickness, significantly thinner than the Uxcell 60mm profile. This makes it suitable for dense radiator setups where space is limited. The Uxcell runs at 2500 RPM for maximum airflow, whereas this Phanteks model is tuned for structural stability and reduced noise. It lacks the AC power requirement of the original, fitting standard PC cases better. If your build values silence and fits in a 200mm slot with limited depth, this Phanteks option offers a quieter, more compact alternative to the industrial-grade Uxcell fan.
Noctua 200mm Quiet Case Fan
The Noctua NF-A20 FLX is designed for silent cooling, contrasting with the Uxcell focus on high airflow. It features a 30mm thickness, similar to the Thermaltake but thinner than the Uxcell 60mm frame. This fan lacks PWM control, matching the Uxcell in that regard, but emphasizes low noise levels. The Uxcell operates on AC 220V/240V, requiring specific power sources, while the Noctua fits standard DC PC environments. Its brown and beige color scheme differs from the typical black industrial look. You should pick this Noctua fan if you prioritize silent operation in a 200mm slot where PWM headers are unavailable, accepting lower airflow for reduced noise compared to the Uxcell.
VBESTLIFE 200mm Dual-Ring ARGB Fan
The VBESTLIFE fan introduces hydraulic bearing technology, differing from the Uxcell dual ball design. It includes 5V ARGB lighting, a feature entirely absent in the original AC fan. The connector is a 4-pin PWM cable, allowing for speed control, whereas the Uxcell runs at a fixed 2500 RPM. This VBESTLIFE model is thinner, at approximately 25mm, compared to the Uxcell 60mm depth. It suits builds that value quiet airflow and aesthetic synchronization over raw industrial cooling. If you need smart speed control and RGB lighting in a 200mm form factor, this hydraulic bearing fan offers modern features the Uxcell lacks, prioritizing silence and visuals over fixed high-speed performance.
Cooler Master SickleFlow 200mm ARGB Fan
The Cooler Master SickleFlow 200 is a low-speed fan designed for silence and RGB aesthetics. It features ARGB lighting, which the Uxcell does not have. The Uxcell runs at 2500 RPM for high airflow, while this Cooler Master unit is tuned for quiet operation in standard cases. It lacks the AC power requirement of the original, fitting DC PC builds. The 200mm size matches the Uxcell, but the performance profile is different, focusing on low noise rather than maximum air movement. This fan is suitable for cases with 200mm mounting space where lighting and silence are priorities. You should choose this option if you value aesthetic sync and quiet operation over the high-airflow, fixed-speed performance of the Uxcell.
Dohaeris 200mm ARGB PWM Fan
The Dohaeris fan is a 25mm thick PWM unit, significantly thinner than the Uxcell 60mm profile. It features 4-pin PWM control, allowing you to adjust speed, unlike the fixed 2500 RPM of the Uxcell. It includes ARGB lighting, adding a visual element the original AC fan lacks. This Dohaeris model is designed for CPU cooling in compact cases, prioritizing low noise and software-synced lighting. The Uxcell is built for industrial AC applications, while this fan fits standard DC PC builds. If you need a thin, controllable fan with RGB effects for a 200mm CPU cooler, this Dohaeris option offers modern features and flexibility that the fixed-speed Uxcell cannot provide.
Quick picks
Our 7 picks
Uxcell 200mm AC Dual Ball Bearing Fan
Best for: High airflow AC cooling needs
- Fan Size
- 200 mm
- Max Fan Speed
- 2500 R.P.M.
- Bearing Type
- Dual Ball
- Dimensions
- 7.87 × 7.87 × 2.36 inches
View on Amazon: Uxcell 200mm AC Dual Ball Bearing Fan Affiliate link
This Uxcell cooling fan measures 200 x 200 x 60mm and runs on AC 220V/240V power. It uses dual ball bearings and reaches a maximum speed of 2500 RPM. The design prioritizes high airflow for cooling performance. You should choose this unit if you need a direct AC connection and durable bearing technology for your specific ventilation requirements.
Pros
- 200mm x 200mm x 60mm dimensions
- Dual ball bearing construction
- 2500 RPM maximum speed
- AC 220V/240V direct power
Cons
- No PWM speed control
- AC voltage only
- No included mounting hardware
Good fit if
- You need a 200mm fan for AC power
- You require high airflow at 2500 RPM
- You want durable dual ball bearings
Skip if
- You need 12V DC computer case power
- You want adjustable fan speeds via PWM
- You require low-noise operation under 2500 RPM
Verdict: Uxcell 200mm AC Dual Ball Fan is a high-speed ventilation solution for systems requiring 220V/240 AC power. It suits industrial or specialized cooling setups where maximum airflow outweighs noise concerns.
Thermaltake Pure 20 200mm Case Fan
Best for: High static pressure needs
- Fan Size
- 200mm
- Bearing Type
- Long Life Sleeve Bearing
- Dimensions
- 11.4 × 10 × 12.6 inches
- Weight
- 15 ounces
View on Amazon: Thermaltake Pure 20 200mm Case Fan Affiliate link
This Thermaltake fan measures 200 by 30 millimeters. The thick frame supports high static pressure and airflow. It uses a long-life sleeve bearing for reliability. The design focuses air to reduce noise while maintaining efficiency. It mounts easily in compatible chassis. You get a quiet cooling solution for your PC case.
Pros
- 200mm by 30mm thick frame for high air pressure
- Long-life sleeve bearing for extended reliability
- Blade design focuses airflow to reduce noise
- Black color option available
Cons
- No PWM speed control listed in specifications
- Sleeve bearing offers lower lifespan than fluid dynamic bearings
- No anti-vibration mounting pads included in data
Good fit if
- You need high static pressure for dense radiators
- You prefer a 30mm thick fan profile
- You want a quiet black fan
Skip if
- You require PWM speed control
- You need anti-vibration mounting pads
- You prefer a thinner 20mm profile
Verdict: Thermaltake Pure 20 200mm Fan suits users who need high static pressure in a thick 30mm frame. It delivers reliable airflow with a sleeve bearing, though it lacks PWM control.
Phanteks 200mm High Airflow Case Fan
Best for: quiet cooling in dense radiator setups
- Fan Size
- 200mm
- Max Airflow
- 110.1 CFM
- Noise Level
- 25.0 decibels
- Bearing Type
- UFB
- Dimensions
- 7.87 × 1.18 × 7.87 inches
- Weight
- 9.6 ounces
View on Amazon: Phanteks 200mm High Airflow Case Fan Affiliate link
The Phanteks PH-F200SP is a 200mm case fan designed for high static pressure. It moves 110.1 CFM of air while maintaining a quiet 25.0 decibel noise level. The fan uses UFB bearings and a magnetic brushless DC motor for stability. It includes eight rubber pads to reduce vibration. This fan suits builds with dense radiators or dust filters that restrict airflow.
Pros
- 200mm size for broad coverage
- 110.1 CFM maximum airflow
- 25.0 decibel noise level
- UFB bearing type for longevity
- Eight pre-installed rubber vibration pads
Cons
- No addressable RGB lighting
- Single fan pack only
- Black color option only
Good fit if
- You need high static pressure for dense heatsinks
- You want a quiet fan under 26 decibels
- You prefer a black fan for your build
Skip if
- You require RGB lighting effects
- You want a multi-pack value option
- You need a white or colored fan
Verdict: Phanteks 200mm High Static Pressure Fan delivers focused airflow for restricted cooling paths. It fits users who prioritize quiet operation and structural stability over aesthetic lighting.
Noctua 200mm Quiet Case Fan
Best for: Silent cooling in 200mm slots without PWM
- Fan Size
- 200mm
- Max Fan Speed
- 800 RPM
- Noise Level
- 18.1 dB(A)
- Connector Type
- 3-pin Molex
- Dimensions
- 1.18 × 7.87 × 7.87 inches
- Weight
- 1.56 pounds
View on Amazon: Noctua 200mm Quiet Case Fan Affiliate link
The Noctua NF-A20 FLX is a 200mm cooling fan designed for high airflow at low noise. It runs at 800 RPM with a maximum noise level of 18.1 dB(A). The 30mm thickness and 3-pin Molex connector make it a straightforward upgrade for older systems. You get two speed settings via a low-noise adaptor. This fan suits you if you prioritize silence over PWM control.
Pros
- 200mm diameter provides high airflow performance
- Maximum noise level is only 18.1 dB(A)
- Includes low-noise adaptor for speed tuning
- Three sets of mounting holes for compatibility
Cons
- Uses 3-pin Molex connector instead of 4-pin PWM
- Thicker 30mm frame may not fit shallow bays
- No LED lighting or smart control features
Good fit if
- You need quiet cooling for a 200mm slot
- You prefer manual speed control via adaptor
- You want a fan with long MTTF
Skip if
- You require PWM speed control from motherboard
- You want RGB lighting effects
- You need a slim 25mm or thinner fan
Verdict: The Noctua NF-A20 FLX 200mm Quiet Fan is a reliable, silent cooling solution for users who value low noise over smart features. It fits best in cases where space allows for its 30mm thickness and where PWM headers are unavailable.
VBESTLIFE 200mm Dual-Ring ARGB Fan
Best for: quiet builds with 5V ARGB sync
- Fan Size
- 200mm
- Connector Type
- 4-pin PWM
- Bearing Type
- Hydraulic
- Lighting Type
- 5V 3-pin ARGB
- Dimensions
- 7.9 × 1 × 7.9 inches
View on Amazon: VBESTLIFE 200mm Dual-Ring ARGB Fan Affiliate link
This VBESTLIFE case fan uses hydraulic bearings to reduce friction and noise while maintaining stable airflow. It features a 4-pin PWM connector for speed control and 5V 3-pin ARGB lighting. The design includes 34 RGB LEDs and a nine-blade structure for large air volume. It suits builders seeking silent operation with addressable lighting synchronization.
Pros
- Hydraulic bearings reduce friction and noise
- 4-pin PWM connector for speed control
- 5V 3-pin ARGB lighting support
- 34 RGB LEDs for uniform illumination
Cons
- No motherboard software mentioned for lighting control
- No RPM or airflow specifications provided
- No decibel rating listed for noise levels
Good fit if
- You want hydraulic bearings for quieter operation
- You need 5V 3-pin ARGB synchronization
- You prefer 4-pin PWM speed control
Skip if
- You require 12V 4-pin RGB lighting
- You need documented airflow ratings
- You prefer ball bearing durability
Verdict: VBESTLIFE 200mm Hydraulic ARGB Fan is a solid option for users prioritizing hydraulic bearing silence and 5V ARGB sync. It fits builds that value quiet airflow over documented performance metrics.
Cooler Master SickleFlow 200mm ARGB Fan
Best for: Quiet builds with 200mm cases and RGB focus
- Fan Size
- 200mm
- Max Fan Speed
- 800 RPM
- Connector Type
- 4-pin PWM
- Lighting Type
- aRGB Gen2
- Dimensions
- 4.72 × 4.72 × 1 inches
- Weight
- 1.1 pounds
View on Amazon: Cooler Master SickleFlow 200mm ARGB Fan Affiliate link
The Cooler Master SickleFlow 200 is a 200mm case fan designed for cases that support larger dimensions. It features a dynamic PWM header allowing speeds up to 800 RPM. The frosted blades enhance its aRGB Gen2 lighting for customizable effects. Its hybrid frame minimizes noise through anti-resonance mounting. This fan suits builders prioritizing aesthetic lighting and stable operation in compatible chassis.
Pros
- 200mm size for high airflow in compatible cases
- aRGB Gen2 lighting with frosted blade design
- Dynamic PWM control up to 800 RPM
- Hybrid frame reduces vibration and noise
Cons
- Low maximum speed of 800 RPM limits airflow
- Only 60mm thickness restricts use in some slots
- No mention of direct software control integration
Good fit if
- You want a 200mm fan with visible lighting effects
- You prioritize quiet operation over maximum airflow
- You have a case supporting 200mm fans
Skip if
- You need high airflow for dense component builds
- You require smart lighting control via software
- Your case only supports 120mm or 140mm fans
Verdict: Cooler Master SickleFlow 200 aRGB is a low-speed fan for users who value lighting and silence. It fits cases with 200mm mounting space but lacks the power for heavy cooling tasks.
Dohaeris 200mm ARGB PWM Fan
Best for: Quiet 25mm thick 200mm CPU cooling
- Fan Size
- 200mm
- Noise Level
- 28dB
- Connector Type
- 4-pin PWM
- Bearing Type
- Hydraulic
- Lighting Type
- 5V 3-pin ARGB
- Compatible Device
- CPU Cooler
View on Amazon: Dohaeris 200mm ARGB PWM Fan Affiliate link
This Dohaeris fan measures 200 by 200 by 25 mm. It uses hydraulic bearings and runs at 28 dB. You connect it via a 4-pin PWM header for speed control. The 5V 3-pin ARGB lighting syncs with motherboard software. The silicone pads reduce vibration. It suits you if you need quiet CPU cooling with addressable RGB effects.
Pros
- 28 dB noise level
- Hydraulic bearing type
- 5V 3-pin ARGB lighting
- Silicone shock-absorbing pads
Cons
- 25 mm thickness limits compatibility with tall CPU coolers
- No included RGB hub or controller
- Low 25 mm profile may reduce airflow compared to thicker fans
Good fit if
- You want quiet 200mm cooling for a CPU
- You use a motherboard with 5V ARGB headers
- You have case space for 25 mm thick fans
Skip if
- You need 12V RGB lighting
- Your CPU cooler is taller than 25 mm
- You want a fan thicker than 25 mm
Verdict: Dohaeris 200mm ARGB PWM CPU Fan fits builders who prioritize low noise and software-synced lighting in a compact 25 mm profile. It is a solid pick for cases that accommodate thin 200mm fans.
Specifications side by side
| Spec | Uxcell 200mm AC Dual Ball Bearing Fan | Thermaltake Pure 20 200mm Case Fan | Phanteks 200mm High Airflow Case Fan | Noctua 200mm Quiet Case Fan | VBESTLIFE 200mm Dual-Ring ARGB Fan | Cooler Master SickleFlow 200mm ARGB Fan | Dohaeris 200mm ARGB PWM Fan |
|---|---|---|---|---|---|---|---|
| Fan Size | 200 mm | 200mm | 200mm | 200mm | 200mm | 200mm | 200mm |
| Max Fan Speed | 2500 R.P.M. | not stated | not stated | 800 RPM | not stated | 800 RPM | not stated |
| Max Airflow | not stated | not stated | 110.1 CFM | not stated | not stated | not stated | not stated |
| Noise Level | not stated | not stated | 25.0 decibels | 18.1 dB(A) | not stated | not stated | 28dB |
| Connector Type | not stated | not stated | not stated | 3-pin Molex | 4-pin PWM | 4-pin PWM | 4-pin PWM |
| Bearing Type | Dual Ball | Long Life Sleeve Bearing | UFB | not stated | Hydraulic | not stated | Hydraulic |
| Lighting Type | not stated | not stated | not stated | not stated | 5V 3-pin ARGB | aRGB Gen2 | 5V 3-pin ARGB |
| Lighting | not stated | not stated | not stated | not stated | ARGB | ARGB | ARGB |
| Compatible Device | not stated | not stated | not stated | not stated | not stated | not stated | CPU Cooler |
| Dimensions | 7.87 × 7.87 × 2.36 inches | 11.4 × 10 × 12.6 inches | 7.87 × 1.18 × 7.87 inches | 1.18 × 7.87 × 7.87 inches | 7.9 × 1 × 7.9 inches | 4.72 × 4.72 × 1 inches | 7.9 × 7.9 × 0.98 inches |
| Weight | not stated | 15 ounces | 9.6 ounces | 1.56 pounds | not stated | 1.1 pounds | not stated |
| Model | a18062300ux0019 | CL-F015-PL20BL-A | PH-F200SP_BBK | NF-A20 FLX | Vbestlifesn89g40g1u153 | MFX-B3DN-08NP2-R1 | AMTL0117 |
| Size | not stated | 200mm | 1 Count (Pack of 1) | 200x200x30mm | not stated | not stated | not stated |
| Color | not stated | Black | Black | Brown/Beige | not stated | 200mm | not stated |
Another guide worth a look: gugxiom replacement CPU cooling fan alternatives.
Frequently asked questions
Which 200mm fan is best for high static pressure?
The Thermaltake Pure 20 is the top choice for high static pressure needs. It features a sleeve bearing and a 30mm thick frame. This design delivers reliable airflow through dense radiators or filters. It lacks PWM control, so speed remains constant. This makes it suitable for setups where pressure outweighs adjustable speed requirements.
What is the quietest 200mm fan option available?
The Noctua NF-A20 FLX is the best option for silent cooling. It operates without PWM headers, prioritizing low noise over smart features. The fan has a 30mm thickness and weighs 1.56 pounds. This solid build supports quiet operation in cases with ample space. It is ideal for users who value silence above all else.
Can I find a 200mm fan with ARGB lighting?
Yes, several options include ARGB lighting. The VBESTLIFE 200mm Dual-Ring Fan uses a hydraulic bearing for silence and supports 5V ARGB sync. The Cooler Master SickleFlow also offers aRGB lighting. The Dohaeris 200mm ARGB PWM Fan adds software-synced lights. These choices suit builds where visual customization is a priority alongside airflow.
Which fan is best for CPU cooling in a thin case?
The Dohaeris 200mm ARGB PWM Fan is designed for compact CPU cooling. It has a thin 25mm profile, making it suitable for cases that accommodate slim fans. It uses a 4-pin connector for PWM control. This allows for adjustable speeds to balance noise and cooling performance in tight spaces.
Does the Uxcell fan have PWM control?
The Uxcell 200mm AC Dual Ball Bearing Fan does not list PWM control in its specifications. It runs at 2500 RPM using AC 220V/240V power. This design suits industrial setups where maximum airflow is critical. You should look for PWM options like the Dohaeris if you need adjustable speed control.
Which fan is the best budget pick?
The Thermaltake Pure 20 is labeled as the best budget option. It offers high static pressure in a 200mm size. It uses a sleeve bearing for reliability. While it lacks PWM, it provides a cost-effective solution for users needing strong airflow through restricted spaces without advanced speed control features.
What bearing type does the VBESTLIFE fan use?
The VBESTLIFE 200mm Dual-Ring ARGB Fan uses a hydraulic bearing. This type of bearing is chosen for its quiet operation. It fits builds that prioritize silence over documented performance metrics. The hydraulic design helps maintain low noise levels while providing adequate airflow for general cooling needs.