6 Best Alternatives to the RIIEYOCA Multi-Size Dual Fan Radiator (2026)

How these alternatives compare

Maxmoral Triple 80mm PCI Fan Mount Bracket

The Maxmoral Triple 80mm PCI Fan Mount Bracket differs significantly from the RIIEYOCA by supporting only 80mm fans. It replaces the multi-size versatility of the RIIEYOCA with a dedicated three-slot PCI form factor. This bracket measures 3.15 inches in width and weighs just 0.32 ounces. You gain a simpler, smaller footprint that fits into standard PCI slots. You lose the ability to use larger 120mm or 140mm fans for higher static pressure. This option suits builders who have space in their case and need targeted cooling for their GPU without complex setups. It is ideal for DIY GPU cooling with small fans where space is tight.

Maxmoral Dual Fan PCI Slot Mount Rack

The Maxmoral Dual Fan PCI Slot Mount Rack offers a dual-fan configuration similar to the RIIEYOCA but restricts you to 80mm fans. It weighs 3.53 ounces and provides a sturdy, versatile solution for adding dual fans to your PC case. Unlike the RIIEYOCA, which supports up to 140mm fans, this bracket limits airflow potential due to smaller fan size. It fits users who need reliable, no-frills cooling expansion for their graphics card. You give up the flexibility of mixing fan sizes but gain a dedicated dual-slot mounting solution. This is best for adding dual fans to PCI slots where 80mm fans are preferred or already owned.

Semetall 80-140mm GPU Bracket

The Semetall 80-140mm GPU Bracket matches the RIIEYOCA in fan size support, covering 80mm to 140mm options. It comes in a pack of two, whereas the RIIEYOCA is a single unit. This bracket measures 8.27 inches in length and weighs 7.05 ounces, making it heavier and more substantial. It is designed for custom GPU airflow modification, allowing you to direct air across the GPU side. You get more mounting hardware with the two-pack but may need to handle custom installation. It fits builders who want to direct air across their GPU side for better thermal performance. This is the best premium option for those needing robust, custom airflow solutions.

SUNGOOYUE Steel Fan Mounting Bracket

The SUNGOOYUE Steel Fan Mounting Bracket supports 80mm to 120mm fans, excluding the 140mm size offered by the RIIEYOCA. It is made of stainless steel, providing structural rigidity and rust resistance similar to the RIIEYOCA. This bracket measures 4.72 inches in length and weighs more than the plastic or thin metal alternatives. You gain a sturdy, rust-resistant mounting solution but lose the ability to use 140mm fans. It is ideal for builders who prioritize structural rigidity and rust resistance over integrated lighting or electronic controls. This option is also great for those who need a reliable mount for 80-120mm fans without the complexity of multi-size compatibility.

DS leddess 120mm 6-Pack RGB Fans

The DS leddess 120mm 6-Pack RGB Fans are not a bracket but a fan set. They support 120mm fans, matching one of the RIIEYOCA's compatible sizes. These fans include RGB lighting and a wireless remote, features the RIIEYOCA bracket lacks. They weigh 0.98 inches in height and measure 4.72 inches in width. You gain uniform lighting and remote convenience but lose the mounting hardware itself. This option is best for users who value remote convenience over software integration. It fits those who already have a bracket and need fans with wireless remote RGB lighting setups. It is a lighting-focused alternative rather than a direct mounting replacement.

DORHEA 80mm 2-Pin DC Fans (2-Pack)

The DORHEA 80mm 2-Pin DC Fans are a fan set, not a bracket. They support 80mm fans, compatible with the RIIEYOCA's smallest size. These fans use a 2-pin connector and deliver 41 CFM airflow at 4500 RPM. They measure 0.98 inches in width and 3.15 inches in height. You gain 2-pin connectivity for older systems but lose PWM control and the mounting bracket. This option is best for 80mm 2-pin radiator bracket setups. It fits your dual fan bracket if you do not need PWM control. It is a solid choice for builders needing 2-pin connections for 80mm slots who already have a mounting solution.

Quick picks

Our 7 picks

1 Best overall

RIIEYOCA Multi-Size Dual Fan Radiator Bracket

Best for: quiet vertical GPU cooling setups

Fan Size

120mm, 140mm, 80mm

Compatible Device

Radiator, Graphics Card

View on Amazon: RIIEYOCA Multi-Size Dual Fan Radiator Bracket Affiliate link

The RIIEYOCA bracket holds dual fans under a video card stand. It supports 80mm, 90mm, 120mm, and 140mm fans. The thickened metal construction resists rust and corrosion. You get four brackets and 16 screws for installation. This setup cools your graphics card quietly without adding bulk. It fits vertical GPU mounts well.

Pros

• Supports 80mm, 90mm, 120mm, and 140mm fans
• Thickened metal resists rust and corrosion
• Includes four brackets and 16 screws
• Mounts under vertical video card stands

Cons

• Fans are not included in the package
• Only supports up to 140mm fan size
• No RGB lighting or control features listed

Good fit if

• You use a vertical GPU mount
• You need quiet cooling for your graphics card
• You have 80mm to 140mm fans to install

Skip if

• You want pre-installed fans included
• You require RGB lighting effects
• You need to mount larger 200mm fans

Verdict: RIIEYOCA Dual Fan Bracket 80-140mm provides a sturdy, rust-resistant mount for vertical GPU setups. It is ideal for builders who already own compatible fans and want quiet, stable cooling.

2 Also great

Maxmoral Triple 80mm PCI Fan Mount Bracket

Best for: DIY GPU cooling with small fans

Fan Size

80mm

Compatible Device

Radiator, Graphics Card

Dimensions

0.98 × 3.15 × 0.98 inches

Weight

0.32 ounces

View on Amazon: Maxmoral Triple 80mm PCI Fan Mount Bracket Affiliate link

This bracket mounts three 80mm or 90mm fans into a single PCI slot. It includes one brace and four connectors for secure installation. The metal construction features a black varnish finish for rust resistance. You get matching screws for easy setup. It helps improve heat dissipation and reduce case noise for DIY graphics card cooling projects.

Pros

• Holds three 80mm or 90mm fans in one slot
• Metal build with rust-resistant black varnish finish
• Includes mounting screws and connectors for easy installation
• Compact 3.15-inch width fits standard PCI slots

Cons

• Limited to 80mm and 90mm fan sizes
• Only mounts three fans total
• No RGB lighting or speed control features

Good fit if

• You need extra cooling for a specific graphics card
• You have unused PCI slots available
• You prefer standard 80mm or 90mm fans

Skip if

• You require 120mm or larger fan support
• You want RGB lighting effects
• You need to mount more than three fans

Verdict: Maxmoral 3-Slot PCI Fan Mount for 80mm Fans offers a simple, durable way to add airflow using standard small fans. It fits users who have space in their case and need targeted cooling for their GPU without complex setups.

3 Best budget

Maxmoral Dual Fan PCI Slot Mount Rack

Best for: Adding dual fans to PCI slots

Fan Size

80mm

Compatible Device

Radiator, Graphics Card

Weight

3.53 ounces

View on Amazon: Maxmoral Dual Fan PCI Slot Mount Rack Affiliate link

This Maxmoral bracket lets you mount two fans to a PCI slot, expanding your cooling options. It supports 80mm, 90mm, 120mm, and 140mm fans. The metal construction features a black baked paint finish for rust resistance. It includes the necessary screws for installation. This setup is ideal for users needing extra airflow for their graphics card or radiator.

Pros

• Supports 80mm, 90mm, 120mm, and 140mm fan sizes
• Dual fan capacity for increased heat dissipation
• Durable metal build with rust-resistant black paint
• Includes mounting screws for easy installation

Cons

• Only supports up to 140mm fans
• No RGB lighting or remote control
• Requires manual installation without tool-free design

Good fit if

• You need extra cooling for a high-performance graphics card
• You want to add fans to a PCI slot
• You prefer a durable metal bracket over plastic

Skip if

• You require RGB lighting effects
• You need support for fans larger than 140mm
• You want a tool-free installation process

Verdict: Maxmoral Dual Fan Mount Rack for Graphics Cards offers a sturdy, versatile solution for adding dual fans to your PC case. It is best for builders seeking reliable, no-frills cooling expansion for their graphics card.

4 Also great

Semetall 80-140mm GPU Bracket

Best for: Custom GPU airflow modification

Fan Size

140mm, 80mm

Compatible Device

Graphics Card

Dimensions

8.27 × 1.97 × 1.97 inches

Weight

7.05 ounces

View on Amazon: Semetall 80-140mm GPU Bracket Affiliate link

This Semetall bracket helps cool your graphics card by directing air across its side. It fits two fans ranging from 80mm to 140mm. The metal plate measures 8.27 inches long and 1.97 inches wide. You get two brackets with screws for installation. This setup improves airflow and helps keep your hardware stable during heavy use.

Pros

• Accommodates 80mm, 90mm, 120mm, or 140mm fans
• Includes two brackets and mounting hardware
• 1.5mm thick steel construction
• Side-blown design improves chassis airflow

Cons

• Requires advanced computer knowledge to install
• Fans are not included in the package
• Limited to 140mm maximum fan size

Good fit if

• You need to cool a vertical graphics card
• You want to use larger 140mm fans
• You have the skills to mount brackets safely

Skip if

• You prefer plug-and-play cooling solutions
• You lack experience with PC hardware assembly
• You only have 80mm fans available

Verdict: Semetall 8-140mm GPU Cooling Bracket is a sturdy option for users who can handle custom installation. It fits builders who want to direct air across their GPU side for better thermal performance.

5 Also great

SUNGOOYUE Steel Fan Mounting Bracket

Best for: Sturdy, rust-resistant mounting of 80-120mm fans

Fan Size

120mm, 80mm

Dimensions

4.72 × 1.97 × 1.97 inches

View on Amazon: SUNGOOYUE Steel Fan Mounting Bracket Affiliate link

This SUNGOOYUE bracket holds 80mm, 92mm, or 120mm case fans using thickened stainless steel. The design includes multiple screw holes for flexible positioning and comes with long, short, and hex screws for secure installation. The baked paint finish resists rust. It fits well if you need to mount additional fans in tight spaces or repurpose PCI slots for cooling.

Pros

• Thickened stainless steel construction for structural integrity
• Compatible with 80mm, 92mm, and 120mm fans
• Includes four long, four short, and four hex screws
• Baked paint finish prevents rust

Cons

• No RGB lighting or fan speed control included
• Requires manual screw installation for each fan
• Limited to mounting fans only, not radiators

Good fit if

• You need to mount 120mm fans in tight spaces
• You want a rust-resistant bracket for your case
• You have extra screws and want a sturdy hold

Skip if

• You need integrated fan speed controllers
• You want pre-installed RGB lighting effects
• You prefer plastic brackets for lighter builds

Verdict: SUNGOOYUE Stainless Steel Fan Mount Bracket offers a sturdy, versatile solution for mounting 80mm to 120mm fans. It is ideal for builders who prioritize structural rigidity and rust resistance over integrated lighting or electronic controls.

6 Best premium

DS leddess 120mm 6-Pack RGB Fans

Best for: Wireless remote RGB lighting setups

Fan Size

120mm

Connector Type

6-pin

Lighting Type

RGB

Compatible Device

Radiator, CPU Cooler

Dimensions

4.72 × 4.72 × 0.98 inches

View on Amazon: DS leddess 120mm 6-Pack RGB Fans Affiliate link

This 120mm RGB fan kit requires a dedicated 6-pin controller hub to function. It includes a wireless remote for adjusting color patterns and speed. The design uses silicone pads to reduce vibration noise. It fits standard cases, radiators, and CPU coolers. You get six fans per pack. This setup suits builders who want synchronized lighting effects across multiple fans without complex wiring.

Pros

• 120mm standard size for broad compatibility
• RF wireless remote for color and speed control
• Silicone pads reduce motor vibration noise
• Six-pack value for full case lighting

Cons

• Requires a 6-pin hub; cannot run standalone
• No motherboard sync or software control listed
• Remote control only, no mobile app

Good fit if

• You want synchronized RGB on multiple fans
• You prefer wireless remote adjustments
• You are building a full case lighting setup

Skip if

• You need motherboard RGB sync
• You want to run fans independently
• You prefer app-based control

Verdict: DS leddess 120mm RGB Fans provide a straightforward way to add uniform lighting to your build. They are ideal for users who value remote convenience over software integration.

7 Best 2-pin

DORHEA 80mm 2-Pin DC Fans (2-Pack)

Best for: 80mm 2-pin radiator bracket setups

Fan Size

80mm

Max Fan Speed

4500RPM

Max Airflow

41CFM

Noise Level

37.9dBA

Connector Type

2pin-ph2.5

Compatible Device

Radiator, CPU Cooler

View on Amazon: DORHEA 80mm 2-Pin DC Fans (2-Pack) Affiliate link

This is a pair of 80mm x 80mm x 25mm DC fans designed for PC case and CPU cooling. They run at 4500 RPM with an airflow of 41 CFM. The connector is a 2-pin PH2.5 type. They operate on 12V power. This option suits you if you need specific 2-pin connections for your dual fan radiator bracket setup.

Pros

• 80mm x 80mm x 25mm size fits standard brackets
• 2-pin PH2.5 connector for direct power
• 4500 RPM max speed for strong airflow
• 41 CFM air flow rating
• 50,000 hour working life

Cons

• No PWM speed control support
• 37.9 dBA noise level is moderate
• No RGB lighting included

Good fit if

• You need 2-pin fans for a specific bracket
• You require 80mm size for your radiator mount
• You want simple 12V direct connection

Skip if

• You need PWM speed control
• You want RGB lighting effects
• You require 120mm or 140mm fans

Verdict: DORHEA 80mm 2-Pin 12V Fan is a solid choice for builders needing 2-pin connections for 80mm slots. It delivers 41 CFM airflow at 4500 RPM. It fits your dual fan bracket if you do not need PWM control.

Specifications side by side

Frequently asked questions

See also

• rowenta pedestal fan alternatives
• gymax fan bike alternatives