Goodisory 3.8L Mini-ITX Case Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for goodisory a09 black mini itx 0 8mm alternatives because the original case has strict clearance limits. The Goodisory 3.8L Mini-ITX Case fits a 3.8-liter footprint and supports Flex PSUs. It measures 9 x 7.4 x 3.5 inches. However, you might need more room for your CPU cooler or graphics card. The original case allows no taller than 75mm for a CPU cooler with an M.2 drive. This tight limit excludes many standard air coolers. You may also want a different motherboard form factor or a larger internal volume for better airflow. The alternatives in this list were chosen because their specs overlap with the original. They all support Mini-ITX motherboards. Some offer open frames for easier access. Others accommodate standard ATX power supplies. This guide compares 6 similar picks to help you find a case that matches your component sizes. You will see options ranging from ultra-compact designs to slightly larger mid-towers. Each pick addresses a specific limitation of the original Goodisory case. We focus on volume, dimensions, and power supply support. This ensures you can build a system that fits without compromise.
How alternatives differ from Goodisory
DALAIBUKESI Mini-ITX Open Frame Chassis
The DALAIBUKESI chassis replaces the enclosed Goodisory design with an open aluminum frame. It removes the 3.8-liter volume constraint, offering a wider 9.4 x 9.4 x 7.9-inch footprint. This structure supports unlimited GPU length, whereas the Goodisory case restricts you to small form factor components. You gain full access for testing but lose dust protection and portability. The 4-pound weight makes it less suitable for backpack transport. If you prioritize component visibility and expansion over a compact footprint, this open frame is a practical alternative to the enclosed Goodisory unit.
T.F.SKYWINDINTL 3.5L Mini-ITX Case
The T.F.SKYWINDINTL case reduces volume to 3.5 liters, making it slightly smaller than the Goodisory 3.8L model. It shares the 0.8mm SPCC construction but adds specific features like screen-mount support and six COM ports. This makes it better suited for specialized office or POS builds rather than general desktop use. The 2.2-pound weight is lighter than the Goodisory case. You sacrifice standard consumer connectivity for industrial versatility. If you need a rigid, ultra-compact enclosure for integrated graphics and specialized ports, this model offers a tighter fit and more functional I/O options than the Goodisory alternative.
ASHATA Compact Acrylic Mini-ITX Case
The ASHATA case uses acrylic panels instead of the Goodisory metal construction. It supports short dedicated graphics cards up to 190mm and FLEX PSUs, similar to the Goodisory power requirements. The dimensions are 23x20.5x12cm, which may not fit all backpacks. It allows for two solid-state drives. You gain visibility and a white aesthetic option but lose the rugged metal durability. The design focuses on compact builds with visible internal components. If you want a ventilated, transparent case for short GPUs and prefer a lighter material build, the ASHATA model is a distinct alternative to the opaque Goodisory chassis.
SilverStone Small Form Factor Mini-ITX Case
The SilverStone SG13B-Q case supports standard ATX power supplies, unlike the Goodisory case which requires Flex PSUs. It accommodates 10.5-inch graphics cards and single 120mm or 140mm liquid radiators. The dimensions are 12 x 10 x 14 inches, significantly larger than the Goodisory 9 x 7.4 x 3.5-inch form factor. At 6 pounds, it is heavier and less portable. You gain flexibility in power supply choice and cooling options. If you need to use an ATX PSU or larger radiators and do not require extreme portability, this SilverStone model offers greater component compatibility than the tight Goodisory enclosure.
SilverStone Slim Mini-ITX Case with Handle
The SilverStone ML08B-H case features a handle and supports 13-inch graphics cards, exceeding the Goodisory clearance limits. It is a slim chassis with dual-orientation capability. Dimensions are 15 x 3.43 x 14.6 inches, and it weighs 7.72 pounds. It requires SFX power supplies, not Flex PSUs. You gain the ability to use longer GPUs and easier transport via the handle. The slim profile differs from the Goodisory boxy shape. If you build with SFX components and need longer GPU support with portability features, this SilverStone case is a robust alternative to the smaller Goodisory unit.
Zalman S3 Compact ATX Mid-Tower Case
The Zalman S3 is an ATX mid-tower case, fundamentally different from the Goodisory Mini-ITX form factor. It supports standard ATX motherboards and includes 120mm fans. Dimensions are 16.2 x 7.44 x 17.8 inches, and it weighs 8.38 pounds. It features a clear acrylic window. You gain significantly more space for components and airflow but lose the compact, portable nature of the Goodisory case. This model is for builders prioritizing capacity and included cooling over small footprint. If you do not need Mini-ITX constraints, the Zalman offers a practical, fan-included solution for larger builds.
Quick picks
Our 7 picks
Goodisory 3.8L Mini-ITX Case
Best for: ultra-compact Mini-ITX builds using Flex PSUs
- Motherboard Support
- Mini-ITX
- Case Volume
- 3.8L
- Dimensions
- 7.4 × 3.5 × 9 inches
- Weight
- 2.6 pounds
The Goodisory 3.8L Mini-ITX Case is an ultra-compact desktop chassis measuring 9 by 7.4 by 3.5 inches and weighing 2.6 pounds. It accommodates a standard Mini-ITX motherboard and a Flex PSU sized up to 5.9 by 3.2 by 1.6 inches. With clearance for CPU coolers up to 75mm and top mounting options for storage, you get a portable 3.8-liter enclosure tailored for minimal desk setups or travel-ready compact computer builds.
Pros
- Compact 3.8-liter volume weighing 2.6 pounds
- Front panel and chassis feature abundant ventilation holes
- Supports CPU coolers up to 75mm with M.2 storage
- Includes two USB 3.0 ports, HD audio, and two Wi-Fi antenna holes
Cons
- Requires a Flex PSU rather than a standard ATX or SFX power supply
- CPU cooler clearance drops to 45mm when using a 3.5-inch drive
- Restricted to a single PCIe expansion slot
Good fit if
- You want a 3.8-liter chassis light enough for travel at 2.6 pounds.
- You plan to build with a Mini-ITX motherboard and a Flex PSU.
- You use an M.2 drive and need up to 75mm of CPU cooler height.
Skip if
- You need a standard SFX or ATX power supply.
- You plan to install multiple PCIe expansion cards.
- You want to mount a 3.5-inch hard drive alongside a tall CPU cooler.
Verdict: Goodisory 3.8L Mini-ITX Case delivers an exceptionally small 3.8-liter footprint with dedicated Flex PSU support and ventilated panels. It provides a solid baseline for ultra-compact Mini-ITX builds if your components match its tight clearance requirements.
DALAIBUKESI Mini-ITX Open Frame Chassis
Best for: open-air test benches and oversized GPU setups
- Motherboard Support
- ITX, MATX, ATX, EATX
- Case Type
- Open Frame
- Max GPU Length
- Unlimited
- Connectivity
- Type-C
- Dimensions
- 7.9 × 9.4 × 9.4 inches
- Weight
- 4 pounds
This DALAIBUKESI model is a black aluminum open-frame chassis measuring 9.4 by 9.4 by 7.9 inches and weighing 4 pounds. Unlike enclosed small form factor cases, it provides an open layout with support for unlimited graphics card length. It accommodates Mini-ITX motherboards alongside ATX, SFX, or 1U power supplies. It also includes Type-C connectivity and mounts for air or water cooling. You will find it suits open-air test benches and custom compact setups.
Pros
- Accommodates unlimited graphics card length
- Compatible with ATX, SFX, and 1U power supplies
- Features integrated Type-C connectivity
- Supports both air and water cooling setups
Cons
- Open frame provides no dust filtration or panel enclosure
- Requires manual DIY chassis assembly
Good fit if
- You need an open-frame bench with unlimited GPU clearance.
- You want versatility to mount ATX, SFX, or 1U power supplies.
- You plan to run liquid cooling on an exposed Mini-ITX platform.
Skip if
- You need an enclosed case to protect components from dust and contact.
- You want a fully assembled chassis ready out of the box.
Verdict: DALAIBUKESI Mini-ITX Aluminum Open Frame Chassis delivers an open-air aluminum platform with unlimited GPU length and flexible power supply support. It works best if you want full component access and do not require enclosed panels.
T.F.SKYWINDINTL 3.5L Mini-ITX Case
Best for: space-saving integrated graphics and POS builds
- Motherboard Support
- Mini ITX, DTX
- Case Type
- SFF, Mini Tower
- Case Volume
- 3.5L
- Tower Size
- Small Form Factor
- Weight
- 2.2 pounds
This 3.5-liter small form factor chassis by T.F.SKYWINDINTL uses 0.8mm SPCC steel construction to house Mini-ITX or DTX motherboards. It relies on an external 12V adapter with a PICO PSU board, leaving space for compact CPU coolers and storage drives. You also get six COM ports and screen-mounting capability. It suits you if you need a robust, ultra-compact enclosure for an integrated-graphics desktop or HTPC.
Pros
- Constructed from durable 0.8mm SPCC steel
- Supports CPU coolers up to 58mm tall without a top drive
- Features six COM ports for specialized external peripherals
- Designed to mount directly behind a computer screen
Cons
- Does not support discrete graphics cards
- Front panel ports limited to USB 2.0 speeds
- Requires a PICO PSU and external 12V power adapter
Good fit if
- You build with integrated graphics on a Mini-ITX or DTX motherboard.
- You need serial COM connectivity for specialized hardware.
- You want to mount your system behind a display.
Skip if
- You require a dedicated graphics card for gaming or rendering.
- You intend to use a standard internal ATX power supply.
- You need high-speed USB 3.0 or USB-C front panel connectivity.
Verdict: T.F.SKYWINDINTL 3.5L Mini-ITX Case is a rigid 0.8mm SPCC enclosure built specifically for ultra-compact systems with integrated graphics. Its screen-mount support and six COM ports make it a versatile pick for minimalist desks and specialized office setups.
ASHATA Compact Acrylic Mini-ITX Case
Best for: compact builds requiring short dedicated graphics cards
- Motherboard Support
- ITX
- Side Panel
- Clear Acrylic
- Max GPU Length
- 190mm
- Compatible Device
- Graphics Card
The ASHATA Mini-ITX Case is a compact acrylic chassis measuring 23x20.5x12cm. If you want a small footprint with dedicated graphics capability, it accommodates a graphics card up to 190mm long alongside a 170x170mm Mini-ITX motherboard. It relies on a FLEX power supply, mounts up to two 2.5-inch SSDs, and supports one cooling fan. Its perforated clear acrylic build suits you if you need portable desktop gaming components on display.
Pros
- Supports graphics cards up to 190mm in length
- Clear acrylic panels with hand screw installation
- Mounts two 2.5-inch SSDs
- Perforated front, top, and bottom panels for airflow
Cons
- Requires a FLEX form factor power supply
- Limited to a single cooling fan mount
- Cannot fit motherboards larger than 170x170mm
Good fit if
- You want to install a dedicated graphics card up to 190mm long.
- You plan to use a compact FLEX power supply and up to two 2.5-inch drives.
- You prefer clear acrylic panels with tool-free hand screw assembly.
Skip if
- You need a standard ATX or SFX power supply.
- You plan to install a graphics card longer than 190mm.
- You require more than one case cooling fan.
Verdict: ASHATA Compact Acrylic Mini-ITX Case provides a visible, ventilated setup for small desktop builds using 190mm GPUs and FLEX power supplies. It balances compact 23x20.5x12cm dimensions with support for two solid-state drives.
SilverStone Small Form Factor Mini-ITX Case
Best for: ATX power supplies and 10.5-inch GPUs
- Motherboard Support
- Mini-DTX, Mini-ITX
- Case Type
- Small Form Factor
- Radiator Support
- 120mm, 140mm
- Max GPU Length
- 10.5 inches
- Dimensions
- 14 × 12 × 10 inches
- Weight
- 6 pounds
This SilverStone desktop enclosure is a small form factor chassis built for Mini-ITX and Mini-DTX motherboards. It supports full-size ATX power supplies and 10.5-inch graphics cards, giving you more component flexibility than ultra-compact alternatives. You also get mounting clearance for single 120mm or 140mm liquid cooling radiators alongside 2.5-inch and 3.5-inch storage drives. It suits you if you need standard desktop hardware clearance in a 6-pound footprint.
Pros
- Fits standard 10.5-inch expansion cards
- Supports full-size ATX power supplies
- Mounts single 120mm or 140mm liquid cooling radiators
- Accepts both Mini-ITX and Mini-DTX motherboards
- Supports both 2.5-inch and 3.5-inch drives
Cons
- Cannot fit graphics cards longer than 10.5 inches
- Radiator mounting limited to single-fan 120mm or 140mm sizes
- Measures 14 by 12 by 10 inches, larger than ultra-compact cases
Good fit if
- You want to use a standard ATX power supply in a compact chassis.
- You plan to install a graphics card up to 10.5 inches long.
- You need mounting space for a 120mm or 140mm liquid cooler.
Skip if
- You need a graphics card longer than 10.5 inches.
- You want to mount a dual-fan 240mm or 280mm radiator.
- You require a case that fits standard micro-ATX or ATX motherboards.
Verdict: SilverStone SFF Mini-ITX Desktop Case accommodates standard ATX power supplies and 10.5-inch graphics cards within a compact layout. It gives you flexible cooling options by supporting single 120mm or 140mm liquid radiators.
SilverStone Slim Mini-ITX Case with Handle
Best for: portable Mini-ITX builds with long graphics cards
- Motherboard Support
- Mini-ITX
- Case Type
- Slim Small Form Factor
- Max GPU Length
- 13 inches
- Dimensions
- 14.6 × 15 × 3.43 inches
- Weight
- 7.72 pounds
This SilverStone chassis is a slim small form factor case designed for Mini-ITX motherboards and SFX power supplies. Measuring 3.43 inches thick and weighing 7.72 pounds, it accommodates full-length graphics cards up to 13 inches long. You can set it up in either horizontal or vertical orientations using the removable carrying handle. It suits you if you need portable desktop performance with room for a dedicated graphics card.
Pros
- Supports graphics cards up to 13 inches long
- Includes a removable carrying handle
- Supports both horizontal and vertical orientation
- Features a tool-less drive cage design
Cons
- Restricted strictly to Mini-ITX motherboards
- Requires an SFX power supply instead of standard ATX
Good fit if
- You need to house a dedicated graphics card up to 13 inches long.
- You want a slim desktop enclosure with a removable transport handle.
- You require the option to position your PC either flat or upright.
Skip if
- You plan to build with a standard ATX power supply.
- You use a motherboard form factor larger than Mini-ITX.
Verdict: SilverStone Slim Mini-ITX Case with Handle delivers 13-inch graphics card clearance inside a portable, dual-orientation slim chassis. It is a capable choice if you build exclusively with Mini-ITX and SFX components.
Zalman S3 Compact ATX Mid-Tower Case
Best for: ATX builders needing included fans
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Acrylic
- Included Fans
- 3x 120mm
- Radiator Support
- 120mm
- Max GPU Length
- 330mm
This is a mid-tower case for ATX motherboards. It includes three 120mm fans and supports up to eight total. The side panel is clear acrylic, not tempered glass. Max GPU length is 330mm. It fits users who want standard ATX size and good airflow. The hairline front panel adds a metal finish look. You get USB 3.0 and 2.0 ports on the top.
Pros
- Supports ATX motherboards
- Includes three 120mm fans
- Clear acrylic side panel
- Supports up to eight fans
- Top I/O with USB 3.0
Cons
- Only supports 120mm radiators
- Acrylic panel is not tempered glass
- Max GPU length is 330mm
Good fit if
- You need an ATX case
- You want included fans
- You prefer acrylic over glass
Skip if
- You need tempered glass
- You require larger radiator support
- You want a Mini-ITX case
Verdict: Zalman S3 ATX Mid-Tower is a practical option for builders needing standard ATX support. It offers solid airflow with included fans and a clear acrylic window. It suits those who prioritize capacity over premium glass materials.
Specifications side by side
| Spec | Goodisory 3.8L Mini-ITX Case | DALAIBUKESI Mini-ITX Open Frame Chassis | T.F.SKYWINDINTL 3.5L Mini-ITX Case | ASHATA Compact Acrylic Mini-ITX Case | SilverStone Small Form Factor Mini-ITX Case | SilverStone Slim Mini-ITX Case with Handle | Zalman S3 Compact ATX Mid-Tower Case |
|---|---|---|---|---|---|---|---|
| Motherboard Support | Mini-ITX | ITX, MATX, ATX, EATX | Mini ITX, DTX | ITX | Mini-DTX, Mini-ITX | Mini-ITX | ATX |
| Case Type | not specified | Open Frame | SFF, Mini Tower | not specified | Small Form Factor | Slim Small Form Factor | Mid-Tower |
| Side Panel | not specified | not specified | not specified | Clear Acrylic | not specified | not specified | Acrylic |
| Included Fans | not specified | not specified | not specified | not specified | not specified | not specified | 3x 120mm |
| Radiator Support | not specified | not specified | not specified | not specified | 120mm, 140mm | not specified | 120mm |
| Max GPU Length | not specified | Unlimited | not specified | 190mm | 10.5 inches | 13 inches | 330mm |
| Case Volume | 3.8L | not specified | 3.5L | not specified | not specified | not specified | not specified |
| Tower Size | not specified | not specified | Small Form Factor | not specified | Small Form Factor | Small Form Factor | Mid-Tower |
| Fan Size | not specified | not specified | not specified | not specified | not specified | not specified | 120mm |
| Connectivity | not specified | Type-C | not specified | not specified | not specified | not specified | USB 3.0 |
| Compatible Device | not specified | not specified | not specified | Graphics Card | not specified | not specified | not specified |
| Dimensions | 7.4 × 3.5 × 9 inches | 7.9 × 9.4 × 9.4 inches | not specified | not specified | 14 × 12 × 10 inches | 14.6 × 15 × 3.43 inches | 16.2 × 7.44 × 17.8 inches |
| Weight | 2.6 pounds | 4 pounds | 2.2 pounds | not specified | 6 pounds | 7.72 pounds | 8.38 pounds |
| Color | Black | Black | black | White | SG13B-Q-V1 | ML08B-H | Acrylic |
| Size | not specified | 1.ITX | not specified | not specified | not specified | not specified | 16.22 x 7.44 x 17.76 inches |
| Model | not specified | not specified | MX02 | not specified | SG13B-Q | ML08B-H | not specified |
When pairing this chassis with a power supply, you can review fsp group mini itx solution flex alternatives.
Frequently asked questions
Which alternative supports the largest graphics cards?
The DALAIBUKESI Mini-ITX Open Frame Chassis allows for unlimited GPU length. This open-air design removes the physical constraints found in enclosed cases like the Goodisory 3.8L. If you need a long dedicated graphics card, this aluminum platform provides the necessary clearance and flexibility for your build.
Can I use an ATX power supply in these mini cases?
Most listed mini-ITX cases require Flex or SFX power supplies due to their small volume. However, the SilverStone SFF Mini-ITX Case explicitly accommodates standard ATX power supplies. This makes it a unique option if you want to avoid buying specialized small form factor power units.
What is the smallest volume option available?
The T.F.SKYWINDINTL 3.5L Mini-ITX Case offers the smallest footprint at 3.5 liters. It is a rigid 0.8mm SPCC enclosure designed for ultra-compact systems. This case is ideal for integrated graphics builds where space is the primary constraint, such as for minimalist desks or POS setups.
Do any cases include pre-installed cooling fans?
The Zalman S3 Compact ATX Mid-Tower Case includes fans to ensure immediate airflow. It supports 120mm fans and provides solid ventilation out of the box. This is a practical choice if you want to avoid sourcing additional cooling components separately for your standard ATX build.
Is there a portable option with a handle?
The SilverStone Slim Mini-ITX Case with Handle is designed for portability. It features a dual-orientation slim chassis that supports 13-inch graphics cards. This model is suitable if you frequently move your PC or need a compact, transportable solution for Mini-ITX and SFX components.
Which case is best for office or POS environments?
The T.F.SKYWINDINTL 3.5L Mini-ITX Case includes six COM ports and screen-mount support. These features make it highly versatile for specialized office setups and POS systems. Its compact size and dedicated connectivity options suit environments where space and serial communication are critical requirements.
Can I see my components with a white case?
The ASHATA Compact Acrylic Mini-ITX Case is available in white with visible acrylic panels. It provides a ventilated setup for small desktop builds using 190mm GPUs. This case balances compact dimensions with the ability to showcase your internal hardware through its transparent side panels.