Cooler Master NCORE 100 MAX Mini-ITX PC Case Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you want compact Small Form Factor enclosures, exploring cooler master ncore 100 max mini itx PC case alternatives helps you evaluate different layout configurations. The Cooler Master NCORE 100 MAX streamlines high-power Mini-ITX builds by bundling a custom 120mm liquid cooler and an 850W SFX Gold power supply into a 15.7-liter chassis. Its extendable frame accommodates graphics cards up to 356mm in length, providing clearance for large hardware without requiring separate cooling or power purchases.
You might prefer a different option if you want to reuse a standard ATX power supply, need an integrated carry handle, or prioritize an ultra-dense volume under ten liters. Other builds require horizontal desktop layouts, traditional air cooling clearance, or standard Flex-1U power supplies rather than integrated bundles. The 6 alternatives below were chosen because their specifications overlap with the original, covering Mini-ITX motherboard support, compact footprints, and dedicated expansion card clearance.
Our top pick: Cooler Master NCORE 100 MAX Mini-ITX Case.
Comparing Mini-ITX Alternatives to NCORE 100
SilverStone Small Form Factor Mini-ITX Case
The SilverStone Small Form Factor Mini-ITX Case supports standard ATX power supplies and radiator sizes up to 140mm, giving you component flexibility that the Cooler Master NCORE 100 MAX lacks. At 6 pounds, it is also much lighter than the 13.9-pound NCORE chassis. However, it gives up the bundled 850W power supply and factory-fitted 120mm liquid cooler. Graphics card clearance also drops from 356mm down to 10.5 inches, ruling out oversized cards. You should pick this chassis if you want to reuse a standard ATX power supply or mount a 140mm radiator without paying for pre-installed power and cooling gear.
SilverStone Slim Mini-ITX Case with Handle
The SilverStone Slim Mini-ITX Case with Handle features a slim, low-profile design measuring 3.43 inches thick, complete with an integrated carrying handle for transport. It accommodates full-size 13-inch graphics cards while weighing only 7.72 pounds, compared to the 13.9-pound NCORE 100 MAX. In exchange for this console-style profile, you give up the pre-installed 850W power supply and the custom 120mm liquid cooler. GPU clearance is also lower than the 356mm maximum supported by the expandable NCORE frame. You should choose this model if you need a slim, handle-equipped case that fits standard SFX power supplies and long graphics cards.
SGPC 5L Portable Mini-ITX Case
The SGPC 5L Portable Mini-ITX Case offers an ultra-compact 5.1-liter volume that occupies a fraction of the 15.7-liter NCORE 100 MAX footprint. Its steel frame weighs 4.14 pounds, making it significantly easier to carry than the 13.9-pound Cooler Master unit. To reach this dense size, it gives up standard SFX power supply support in favor of Flex-1U units and restricts graphics cards to 185mm instead of 356mm. It also lacks an integrated liquid cooling system and bundled power supply. Pick this case if you want an ultra-portable desktop build and plan to run short graphics hardware with a Flex-1U supply.
HYTE Revolt 3 Mini-ITX Case with Handle
The HYTE Revolt 3 Mini-ITX Case delivers 360-degree hardware access through removable panels and includes an integrated handle for convenient transport. At 11 pounds, it is lighter than the 13.9-pound NCORE 100 MAX while maintaining a vertical tower layout. However, it does not include a power supply or CPU cooling solution, whereas the NCORE comes ready with an 850W power supply and a 120mm liquid cooler. You must also supply all cables yourself. You should pick the Revolt 3 if you already have dedicated components, want high-speed front USB-C, and value straightforward panel removal for maintenance.
JOYJOM 4.3L Aluminum Mini-ITX Case
The JOYJOM Aluminum Mini-ITX Case provides a tiny 4.3-liter aluminum enclosure weighing just 2.51 pounds, dramatically undercutting the 15.7-liter volume and 13.9-pound weight of the NCORE 100 MAX. It includes a PCIe 3.0 riser cable right in the box. The trade-off is component space: it restricts graphics card length to 17 centimeters and relies on Flex 1U power supplies. It completely excludes the integrated 850W ATX 3.0 power supply and 38mm-thick liquid radiator found in the Cooler Master model. Choose this enclosure if your priority is minimal desktop footprint with a compact 17cm card.
Jonsbo Mini-ITX Handled Mesh Case
The Jonsbo Mini-ITX Handled Mesh Case accommodates tall air coolers up to 170mm and supports standard ATX power supplies, offering cooling and power flexibility absent in the NCORE 100 MAX. It also features a carrying handle and weighs 6.65 pounds, less than half the 13.9-pound Cooler Master build. In return, GPU clearance decreases from 356mm to 255mm, and the case lacks an integrated power supply or pre-installed liquid cooler. You should pick this chassis if you prefer using a large tower air cooler with standard ATX power components rather than an integrated closed-loop liquid setup.
Quick picks
Our 7 picks
Cooler Master NCORE 100 MAX Mini-ITX Case
Best for: Turnkey high-end Mini-ITX builds
- Motherboard Support
- Mini-ITX
- Case Type
- Mini-ITX
- Radiator Support
- 120mm
- Max GPU Length
- 356mm
- Case Volume
- 15.7L
- Compatible Device
- Graphics Card
The Cooler Master NCORE 100 MAX is a 15.7-liter Mini-ITX chassis built for compact performance setups. It includes a built-in 850W ATX 3.0 Gold power supply and a custom 120mm liquid cooler with a 38mm radiator. The frame extends from 155mm to 172mm in width to fit vertical graphics cards up to 356mm long. This design suits you if you want high-end hardware integration without sourcing separate power and liquid cooling units.
Pros
- Includes custom 850W ATX 3.0 Gold SFX power supply
- Pre-installed 120mm liquid cooler with 38mm radiator
- Accommodates vertical GPUs up to 356mm in length
- Expandable frame extends width from 155mm to 172mm
Cons
- Exclusively supports Mini-ITX motherboards
- Radiator support limited to 120mm size
Good fit if
- You want a bundled 850W power supply and liquid cooler tailored to the chassis
- You plan to install a long vertical graphics card up to 356mm
- You need a small 15.7-liter desktop footprint
Skip if
- You need a motherboard larger than Mini-ITX
- You plan to use a 240mm or larger liquid cooling radiator
Verdict: Cooler Master NCORE 100 MAX Mini-ITX Case delivers an all-in-one small-form-factor foundation with its integrated 850W power supply and custom liquid cooling. Its extendable frame accommodates full-length graphics cards up to 356mm within a tight 15.7-liter footprint.
SilverStone Small Form Factor Mini-ITX Case
Best for: compact builds using standard ATX power supplies
- Motherboard Support
- Mini-DTX, Mini-ITX
- Case Type
- Small Form Factor
- Radiator Support
- 120mm, 140mm
- Max GPU Length
- 10.5 inches
- Dimensions
- 14 × 12 × 10 inches
- Weight
- 6 pounds
This compact chassis houses small form factor setups using Mini-ITX or Mini-DTX motherboards. You get room for a standard ATX power supply, one 120mm or 140mm all-in-one liquid cooler, and both 2.5-inch and 3.5-inch drives. Expansion card clearance maxes out at 10.5 inches. It suits you if you want a compact footprint while reusing standard full-size hardware.
Pros
- Fits standard Mini-ITX and Mini-DTX motherboards
- Accommodates full ATX power supplies
- Mounts 120mm or 140mm single-fan liquid coolers
- Accepts standard-length 10.5-inch expansion cards
Cons
- GPU length capped at 10.5 inches
- Liquid cooling limited to 120mm or 140mm single-fan sizes
- Front panel uses faux aluminum finish
Good fit if
- You build with a Mini-ITX or Mini-DTX motherboard.
- You want to use a standard ATX power supply.
- You use a graphics card 10.5 inches or shorter.
Skip if
- You have a graphics card longer than 10.5 inches.
- You need a dual-fan 240mm or 280mm liquid cooler.
Verdict: SilverStone Mini-ITX Small Form Factor Case delivers compact hardware housing with support for standard ATX power supplies and 10.5-inch expansion cards. It provides practical cooling space for a single 120mm or 140mm radiator.
SilverStone Slim Mini-ITX Case with Handle
Best for: portable setups requiring long GPU support
- Motherboard Support
- Mini-ITX
- Case Type
- Slim Small Form Factor
- Max GPU Length
- 13 inches
- Dimensions
- 14.6 × 15 × 3.43 inches
- Weight
- 7.72 pounds
This SilverStone slim small form factor chassis accommodates a Mini-ITX motherboard and graphics cards up to 13 inches. At 3.43 inches tall, it fits compact areas and features a removable carrying handle for mobile setups. You can position the frame vertically or horizontally to match your desk. Tool-less drive cages and dedicated expansion slots streamline assembly with SFX power supplies.
Pros
- Supports graphics cards up to 13 inches long
- Removable carrying handle included for transport
- Supports both horizontal and vertical positioning
- Tool-less drive cage design speeds up drive installation
- Ultra-slim 3.43-inch height profile
Cons
- Restricted to SFX power supplies
- Supports only Mini-ITX motherboards
Good fit if
- You want a portable SFF PC that includes a top handle.
- You plan to run a full-length GPU up to 13 inches long.
- You require the option to lay your case flat or stand it upright.
Skip if
- You plan to use a standard ATX power supply.
- You are building with a Micro-ATX or ATX motherboard.
Verdict: SilverStone Slim Mini-ITX Case with Handle offers a dual-orientation, low-profile chassis engineered for full-size 13-inch graphics cards. It is an efficient choice when your setup requires portable dimensions and standard SFX power supply support.
SGPC 5L Portable Mini-ITX Case
Best for: ultra-compact portable Mini-ITX desktop builds
- Motherboard Support
- Mini ITX
- Case Type
- SFF
- Side Panel
- Ventilated Steel
- Max GPU Length
- 185mm
- Case Volume
- 5.1L
- Tower Size
- Small Form Factor
The SGPC 5L Portable Mini-ITX Case offers an ultra-compact 5.1-liter volume designed for tight desk spaces and travel setups. Built with 1.5-millimeter ventilated steel panels, it supports Mini-ITX motherboards and Flex-1U power supplies. You get front-panel USB 3.2 and Type-C connectivity alongside two 2.5-inch drive mounts. If you plan to install a dedicated graphics card up to 185 millimeters long, you must provide a compatible dual-reverse PCIe riser cable.
Pros
- Compact 5.1L volume fits small desks and backpacks
- Front I/O features both USB 3.2 and Type-C ports
- Vented 1.5mm steel panels support system airflow
- Two 2.5-inch drive mounts with anti-vibration padding
Cons
- Requires a Flex-1U power supply instead of standard SFX or ATX units
- Limits graphics card length to 185mm and thickness to 43mm
- Requires a separate dual reverse PCIe riser cable for GPU installation
Good fit if
- You need a compact 5.1L chassis that fits into a backpack
- You plan to use a Mini-ITX motherboard and a Flex-1U power supply
- You have a compact graphics card measuring 185mm or less
Skip if
- You want to install a standard SFX or ATX power supply
- You have a full-size graphics card longer than 185mm or thicker than 43mm
- You prefer an enclosure that includes an integrated PCIe riser cable
Verdict: SGPC 5L Portable Mini-ITX Case delivers an ultra-dense 5.1-liter steel layout for builders who need maximum portability. Its compact footprint requires careful component selection around its Flex-1U power supply layout and 185mm GPU limit.
HYTE Revolt 3 Mini-ITX Case with Handle
Best for: portable Mini-ITX builds requiring fast 360-degree component access
- Motherboard Support
- ITX
- Case Type
- Small Form Factor
- Use
- Gaming
- Dimensions
- 9.9 × 7 × 16.1 inches
- Weight
- 11 pounds
The HYTE Revolt 3 is a vertical small form factor enclosure measuring 7 inches wide, 9.9 inches long, and 16.1 inches tall. Built from metal and weighing 11 pounds, it supports standard layout Mini-ITX motherboards. You get an integrated carrying handle for transport, removable panels on all sides for 360-degree component access, and a front USB-C port. This suits builders wanting a portable vertical Mini-ITX layout.
Pros
- Integrated carrying handle for portability
- Removable external panels on all sides for 360-degree access
- Front I/O with USB 3.2 Gen 2 Type-C and dual USB 3.2 Gen 1 Type-A ports
- Includes a 3-year warranty
Cons
- Limited exclusively to standard Mini-ITX motherboards
- Power supply is not included with this case-only model
- Stands 16.1 inches tall and weighs 11 pounds empty
Good fit if
- You need an integrated handle to move your Mini-ITX setup.
- You want 360-degree interior access via removable side panels.
- You require front-panel USB 3.2 Gen 2 Type-C connectivity.
Skip if
- You plan to use a motherboard larger than Mini-ITX.
- You want a case that includes a power supply out of the box.
Verdict: HYTE Revolt 3 Mini-ITX Case delivers 360-degree hardware access and portable handling within a compact vertical metal chassis. It is a solid pick if you already have a power supply and want dedicated high-speed USB-C I/O.
JOYJOM 4.3L Aluminum Mini-ITX Case
Best for: ultra-compact builds with short graphics cards
- Motherboard Support
- Standard ITX
- Case Type
- SFF
- Case Volume
- 4.3L
- Tower Size
- Small Form Factor
- Use
- Gaming
- Compatible Device
- Graphics Card
This compact SFF chassis from JOYJOM features a 4.3-liter aluminum alloy frame built for ultra-small Mini-ITX setups. It supports standard 17x17-centimeter motherboards, graphics cards up to 17 centimeters long, and dual 2.5-inch drives. You also get an included PCIe 3.0 riser cable in the box. It suits you if you need a lightweight, desk-friendly chassis built around a low-profile CPU cooler and a dedicated compact graphics card.
Pros
- Includes an 18.5 cm PCIe 3.0 riser cable
- Compact 4.3L volume with a 2.0 mm aluminum alloy body
- Mounts two 2.5-inch solid-state drives up to 9 mm thick
- Weighs 2.51 pounds for easy desk placement
Cons
- Restricts CPU cooler clearance to 36 mm
- Limits graphics card dimensions to 17 x 10 x 4 cm
- Requires a compact Flex 1U power supply
Good fit if
- You have a mini graphics card measuring 17 x 10 x 4 cm or less.
- You use a Flex 1U power supply and a CPU cooler under 36 mm.
- You want an ultra-compact 4.3L aluminum case that includes a riser cable.
Skip if
- You plan to install a full-length graphics card over 17 cm.
- You need space for standard SFX or ATX power supplies.
- You require a CPU cooler taller than 36 mm.
Verdict: JOYJOM 4.3L Aluminum Mini-ITX Case provides an ultra-compact footprint for builds centered on small 17-centimeter graphics cards and Flex 1U power supplies. It delivers clean aluminum construction and comes ready with a dedicated PCIe 3.0 riser cable.
Jonsbo Mini-ITX Handled Mesh Case
Best for: portable builds with tall air coolers
- Motherboard Support
- ITX, Mini-DTX
- Case Type
- SFF
- Side Panel
- Mesh
- Max GPU Length
- 255mm
- Tower Size
- Small Form Factor
- Dimensions
- 10.5 × 8 × 11.6 inches
This SFF chassis from Jonsbo features all-mesh exterior panels and an integrated top carry handle. It accommodates Mini-ITX or Mini-DTX motherboards alongside full-height CPU coolers up to 170mm tall. You also get clearance for standard ATX or SFX power supplies up to 140mm long, though graphics card length stays capped at 255mm. This layout suits portable desktop builds using standard-sized air coolers.
Pros
- Accommodates tall CPU coolers up to 170mm
- Supports standard ATX power supplies up to 140mm
- All-mesh panels for direct ventilation
- Integrated top carry handle with Velcro fastener
- Four expansion slots for multi-slot cards
Cons
- Limits graphics card length to 255mm
- Bottom 120mm fan mount shared with the 3.5-inch drive bay
- Power supply length capped at 140mm
Good fit if
- You want to install a standard air cooler up to 170mm tall.
- You need a portable Mini-ITX chassis with a built-in handle.
- You plan to use an ATX power supply under 140mm long.
Skip if
- You own a graphics card longer than 255mm.
- You need dedicated space for both a bottom fan and a 3.5-inch drive.
Verdict: Jonsbo Handled Mesh Mini-ITX Case provides generous 170mm cooler clearance and standard ATX power supply support in a portable chassis. Choose it if your graphics card measures under 255mm and you prioritize air cooling.
Specifications side by side
| Spec | Cooler Master NCORE 100 MAX Mini-ITX Case | SilverStone Small Form Factor Mini-ITX Case | SilverStone Slim Mini-ITX Case with Handle | SGPC 5L Portable Mini-ITX Case | HYTE Revolt 3 Mini-ITX Case with Handle | JOYJOM 4.3L Aluminum Mini-ITX Case | Jonsbo Mini-ITX Handled Mesh Case |
|---|---|---|---|---|---|---|---|
| Motherboard Support | Mini-ITX | Mini-DTX, Mini-ITX | Mini-ITX | Mini ITX | ITX | Standard ITX | ITX, Mini-DTX |
| Case Type | Mini-ITX | Small Form Factor | Slim Small Form Factor | SFF | Small Form Factor | SFF | SFF |
| Side Panel | not specified | not specified | not specified | Ventilated Steel | not specified | not specified | Mesh |
| Radiator Support | 120mm | 120mm, 140mm | not specified | not specified | not specified | not specified | not specified |
| Max GPU Length | 356mm | 10.5 inches | 13 inches | 185mm | not specified | not specified | 255mm |
| Case Volume | 15.7L | not specified | not specified | 5.1L | not specified | 4.3L | not specified |
| Tower Size | not specified | Small Form Factor | Small Form Factor | Small Form Factor | Small Form Factor | Small Form Factor | Small Form Factor |
| Fan Size | 120mm | not specified | not specified | not specified | not specified | not specified | not specified |
| Use | not specified | not specified | not specified | Gaming | Gaming | Gaming | not specified |
| Compatible Device | Graphics Card | not specified | not specified | not specified | not specified | Graphics Card | not specified |
| Dimensions | 6.1 × 18.9 × 8.35 inches | 14 × 12 × 10 inches | 14.6 × 15 × 3.43 inches | 7.7 × 4.7 × 8.7 inches | 9.9 × 7 × 16.1 inches | 7.24 × 4.09 × 8.78 inches | 10.5 × 8 × 11.6 inches |
| Weight | 13.9 pounds | 6 pounds | 7.72 pounds | 4.14 pounds | 11 pounds | 2.51 pounds | 6.65 pounds |
| Color | Dark Grey | SG13B-Q-V1 | ML08B-H | WHITE | Black | Black | White |
| Model | NR100-MNNN85-SL0 | SG13B-Q | ML08B-H | K39 | CS-HYTE-REVOLT3-B | not specified | C6-ITX White |
If you prefer a prebuilt system over an ITX enclosure, evaluate beelink mini PC alternatives for smaller chassis dimensions.
Frequently asked questions
Which Cooler Master NCORE 100 MAX alternative fits the longest graphics card?
The SilverStone Slim Mini-ITX Case with Handle supports up to 13-inch graphics cards, making it suitable for long GPUs. The NCORE 100 MAX accommodates cards up to 356mm with its extendable frame. If you want a slim chassis that still houses full-length cards, the SilverStone model uses an SFX power supply and dual-orientation design.
What is the smallest alternative to the Cooler Master NCORE 100 MAX?
The JOYJOM 4.3L Aluminum Mini-ITX Case is the smallest option on the list with a volume of just 4.3 liters. It weighs 2.51 pounds and measures 4.09 by 8.78 by 7.24 inches. It limits graphics card length to 17 centimeters and relies on a Flex 1U power supply, making it significantly more compact than the 15.7-liter NCORE 100 MAX.
Can you use a standard ATX power supply in any of these Mini-ITX cases?
Yes, the Jonsbo Handled Mesh Mini-ITX Case and the SilverStone Small Form Factor Case both accommodate standard ATX power supplies. This allows you to install existing full-sized units without buying compact SFX or Flex-1U power supplies. In contrast, the Cooler Master NCORE 100 MAX comes with a built-in 850W unit, restricting your choice of power hardware.
Which alternative is best if you want a vertical chassis with an integrated handle?
The HYTE Revolt 3 Mini-ITX Case provides a vertical form factor with an integrated carrying handle, similar to the upright footprint of the NCORE 100 MAX. It features 360-degree component access for easier hardware installation and dedicated high-speed USB-C connectivity. Unlike the NCORE, it does not include a power supply, making it ideal if you already own one.
Which Mini-ITX alternative offers the most clearance for large CPU air coolers?
The Jonsbo Mini-ITX Handled Mesh Case accommodates CPU air coolers up to 170mm tall. This gives you space for large air coolers, whereas the NCORE 100 MAX relies on its custom liquid cooling setup. The Jonsbo case also features mesh panels and a handle for portability, while restricting your graphics card length to under 255mm.
What power supply type is required for ultra-compact cases like SGPC and JOYJOM?
Both the SGPC 5L Portable Mini-ITX Case and the JOYJOM 4.3L Aluminum Mini-ITX Case require a Flex 1U power supply. These compact cases reduce overall enclosure size by using this smaller power supply format instead of full-sized hardware. Due to their compact profiles, you must pair them with short graphics cards measuring 185mm for the SGPC or 17cm for the JOYJOM.
Does any alternative include a PCIe riser cable in the package?
Yes, the JOYJOM 4.3L Aluminum Mini-ITX Case includes a dedicated PCIe 3.0 riser cable. This component lets you connect your graphics card inside the 4.09-inch-wide aluminum chassis. The included riser accommodates compact graphics cards up to 17 centimeters in length, providing an out-of-the-box mounting solution for miniature desktop gaming setups.