15 Best Thermalright Case Fans with 120mm, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Selecting the right Thermalright case fan with 120mm dimensions depends on your case layout and airflow requirements. We evaluated 15 models using the specifications published on each product listing. The top pick is the Thermalright 120mm Slim ARGB Fan, which leads because its 15mm profile and 4-pin PWM control provide cooling in tight spaces where standard fans will not fit.
This guide helps you decide whether you need standard 25mm frames, reverse airflow blades for visible intakes, or low-profile designs to match your chassis clearance and cable routing.
Quick picks
The best fit for you
- You build in compact cases with tight component clearance Thermalright 120mm Slim ARGB Fan Its 15mm slim frame clears restricted spaces where standard 25mm fans cannot fit.
- You want effective PWM cooling without any RGB lighting Thermalright 120mm PWM Case Fan It delivers 66.17 CFM airflow using a 4-pin PWM connector without integrated lighting components.
- You want illuminated fans for visible chassis intake mounts Thermalright 120mm Reverse ARGB Case Fan The reverse airflow configuration displays the addressable RGB lighting toward the front while intaking air.
- You want to outfit an all-white case completely Thermalright 120mm White ARGB Case Fan 5-Pack This bundle supplies five matching white 120mm fans rated for 66.17 CFM of airflow.
Our 15 picks
Thermalright 120mm Slim ARGB Fan
Best for: compact PC cases with tight component clearance
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500RPM
- Max Airflow
- 52CFM
- Static Pressure
- 1.24mm H2O
- Noise Level
- ≤24.1dBA
- Connector Type
- 4-pin PWM
This 120mm fan features a slim 15mm thickness designed for tight spaces where standard 25mm fans cannot clear components. You get 4-pin PWM speed control reaching up to 1500 RPM, delivering 52 CFM of airflow and 1.24 mm H2O static pressure. Integrated addressable RGB lighting connects directly to your motherboard header. It suits your build if you need reliable cooling in compact enclosures with low clearance.
Pros
- Slim 15mm profile fits restricted clearance areas
- 4-pin PWM control supports variable speeds up to 1500 RPM
- Rated noise level stays at or below 24.1 dBA
- Includes four integrated corner vibration damping pads
Cons
- Lower maximum airflow at 52 CFM compared to thicker standard fans
- Single fan pack rather than a multi-fan bundle
Good fit if
- You need a low-profile 15mm fan to fit tight clearance spaces.
- You want addressable RGB lighting synchronized with your motherboard.
- You require PWM speed regulation with noise capped at 24.1 dBA.
Skip if
- You need high static pressure exceeding 1.24 mm H2O for thick radiators.
- You want a multi-pack of fans to fill an entire case at once.
Verdict: Thermalright 120mm Slim ARGB Case Fan delivers balanced cooling and lighting inside compact builds where standard fan depths will not fit. Its 15mm profile and 4-pin PWM operation make it a versatile choice for space-constrained setups.
Thermalright 120mm White ARGB Fan 3-Pack
Best for: white PC builds needing ARGB airflow
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1550RPM
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- 25.6dBA
- Connector Type
- 4pin PWM
This Thermalright 120mm white cooling fan delivers up to 66.17 CFM airflow and 1.53 mm H2O static pressure at 1550 RPM. Built with an S-FDB fluid dynamic bearing, it operates at a maximum noise level of 25.6 dBA. A 4-pin PWM interface allows motherboard speed management, accompanied by 55cm of series control cabling. This model suits you if you want addressable RGB illumination and balanced thermal performance for white computer cases or radiators.
Pros
- Maximum airflow of 66.17 CFM at 1550 RPM
- S-FDB fluid dynamic bearing reduces blade vibration
- 4-pin PWM connection with 55cm cable for series control
- Addressable RGB lighting with 17 selectable modes
Cons
- Maximum noise level reaches 25.6 dBA at full speed
- Static pressure limited to 1.53 mm H2O
Good fit if
- You want a white 120mm fan with motherboard-synced ARGB lighting.
- You need 4-pin PWM automatic speed adjustment up to 1550 RPM.
- You require up to 55cm of cable length for running fans in series.
Skip if
- You prefer an all-black fan without lighting.
- You require static pressure higher than 1.53 mm H2O for dense cooling setups.
Verdict: Thermalright 120mm White ARGB Case Fan provides reliable 66.17 CFM airflow, PWM series cabling, and addressable lighting for white PC builds. Its fluid dynamic bearing keeps operation stable up to 1550 RPM.
Thermalright 120mm ARGB Case Fan
Best for: balanced airflow and daisy-chained ARGB setups
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1550RPM
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- ≤ 25.6dBA
- Connector Type
- 4pin PWM
This three-pack provides 120mm cooling fans equipped with addressable RGB lighting and fluid dynamic bearings. You get an airflow rating of 66.17 CFM and a static pressure of 1.53 mm H2O at a top speed of 1550 RPM. Sound levels remain at or below 25.6 dBA. You will find these fans suit your build if you need balanced case ventilation with synchronized motherboard lighting and daisy-chain PWM cable connections.
Pros
- Delivers up to 66.17 CFM airflow at 1550 RPM
- Fluid dynamic bearing design minimizes blade vibration
- Includes 55cm cable supporting PWM series daisy-chaining
- Supports 17 lighting modes synchronized via motherboard ARGB
Cons
- Static pressure reaches a maximum of 1.53 mm H2O
- Requires a motherboard ARGB port for lighting control
Good fit if
- You want 4-pin PWM fans that can connect in series across up to 55cm.
- You have a motherboard header capable of managing ARGB illumination.
- You need 120mm chassis fans operating at or below 25.6 dBA.
Skip if
- You need high static pressure exceeding 1.53 mm H2O for thick radiators.
- You lack a compatible 5V ARGB motherboard connection.
Verdict: Thermalright 120mm ARGB Case Fans deliver 66.17 CFM of airflow with quiet fluid dynamic bearings. They provide dependable 4-pin PWM speed regulation and synchronized addressable illumination for standard chassis mounts.
Thermalright 120mm PWM Case Fan
Best for: clean, non-RGB builds needing PWM cooling
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1550RPM
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- ≤ 25.6dBA
- Connector Type
- 4pin PWM
This Thermalright 120mm PWM Case Fan is a standard 120mm cooling fan built for chassis ventilation or heatsinks. It delivers up to 66.17 CFM of airflow and 1.53 mm H2O static pressure at a maximum speed of 1550 RPM. Operating at noise levels up to 25.6 dBA, it uses an S-FDB fluid dynamic bearing and silicone corner pads. You will appreciate this model if you want steady chassis cooling without integrated lighting.
Pros
- Airflow rating of 66.17 CFM at 1550 RPM
- S-FDB fluid dynamic bearing reduces blade shake
- 55cm cable length supports PWM series daisy-chaining
- Four silicone corner pads isolate vibration
Cons
- No integrated RGB or ARGB lighting
- Single fan pack rather than a multi-fan bundle
Good fit if
- You need a 120mm fan with up to 66.17 CFM airflow for cases or CPU coolers.
- You want PWM series daisy-chaining using an included 55cm cable.
- You prefer a PC build without lighting.
Skip if
- You want built-in ARGB lighting effects.
- You need fan speeds exceeding 1550 RPM.
Verdict: Thermalright 120mm PWM Case Fan provides 66.17 CFM airflow and reduced vibration via silicone pads and a fluid dynamic bearing. It serves as a straightforward, light-free option for chassis cooling.
Thermalright 120mm ARGB PWM Fan
Best for: quiet ARGB case airflow and heatsink cooling
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500RPM
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- ≤ 25.6dBA
- Connector Type
- 4PIN PWM
This Thermalright 120mm fan provides balanced airflow and lighting for your PC chassis or heatsink. It delivers up to 66.17 CFM of airflow at 1500 RPM while keeping noise at or below 25.6 dBA. The unit includes an S-FDB bearing to reduce blade wobble and a 55 cm daisy-chainable PWM cable. It suits your build if you want standard 120mm fan slots filled with motherboard-synced ARGB lighting and quiet cooling.
Pros
- Airflow rating of 66.17 CFM at 1500 RPM
- Maximum noise level rated at 25.6 dBA
- S-FDB fluid dynamic bearing reduces blade vibration
- Configured with 55 cm cable for PWM series daisy-chaining
Cons
- Static pressure reaches a maximum of 1.53 mm H2O
- Top rotational speed is limited to 1500 RPM
- Requires a 3-pin ARGB header on your motherboard for lighting
Good fit if
- You need balanced 120mm airflow fans running under 26 dBA.
- You want 55 cm PWM daisy-chain cables to simplify wiring.
- You have a compatible 3-pin ARGB header on your motherboard.
Skip if
- You require static pressure higher than 1.53 mm H2O for dense radiators.
- You need fan speeds exceeding 1500 RPM for extreme cooling demands.
- You lack a 3-pin ARGB header on your motherboard.
Verdict: Thermalright 120mm ARGB PWM Case Fan balances 66.17 CFM airflow with low noise levels up to 25.6 dBA. It delivers dependable case cooling and synchronized addressable RGB lighting for any standard 120mm mount.
Thermalright 120mm Reverse Airflow ARGB Fan
Best for: visible intake mounts needing reverse airflow
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500 RPM
- Max Airflow
- 47.6 CFM
- Static Pressure
- 1.31mm H2O
- Noise Level
- ≤ 23.2dBA
- Connector Type
- 4-pin PWM
The Thermalright 120mm Reverse ARGB Fan provides reversed airflow to keep the lighted side facing inward during intake duty. It spins up to 1500 RPM via a 4-pin PWM header, generating 47.6 CFM airflow and 1.31 mm H2O static pressure. Fluid dynamic bearings keep operational noise at or below 23.2 dBA. This fan suits you if you want clean intake aesthetics and motherboard-synchronized ARGB lighting.
Pros
- Reverse airflow design maintains visible ARGB lighting when used as an intake
- Fluid dynamic bearing keeps noise levels at or below 23.2 dBA
- 4-pin PWM connection with up to 55 cm series cable
- Motherboard-synchronized ARGB lighting supporting 17 light modes
Cons
- Maximum airflow reaches 47.6 CFM
- Static pressure tops out at 1.31 mm H2O
Good fit if
- You mount intake fans where the front of the fan hub faces inside the case.
- You need 4-pin PWM motherboard control with speeds up to 1500 RPM.
- You run a 55 cm series cable setup to link fan headers.
Skip if
- You need higher static pressure than 1.31 mm H2O for thick cooling radiators.
- You require airflow rates exceeding 47.6 CFM for high-heat enclosures.
Verdict: Thermalright 120mm Reverse ARGB Fan delivers reverse airflow to display front-facing ARGB lighting during intake mounting while maintaining quiet fluid dynamic bearing operation at 1500 RPM.
Thermalright 120mm Reverse ARGB Case Fan
Best for: visible intake mounting in showcase PC cases
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500 RPM
- Connector Type
- 4-pin PWM
- Bearing Type
- S-FDB
- Lighting Type
- ARGB
- Blade Direction
- Reverse
The Thermalright 120mm Reverse Airflow ARGB Fan provides intake cooling without hiding the front of the fan blades. Running at up to 1500 RPM via a 4-pin PWM connection, it uses an S-FDB bearing to reduce blade wobble. You also get a 55cm daisy-chain PWM cable and integrated ARGB aperture lighting, making it suitable if you want intake airflow while keeping illumination visible inside your PC case.
Pros
- Reverse airflow design displays blade face during intake
- Up to 1500 RPM PWM speed control
- S-FDB bearing designed to reduce blade vibration
- 55cm cable supports PWM series daisy-chaining
Cons
- Top speed capped at 1500 RPM
- Single-fan package rather than a multi-pack
Good fit if
- You need an intake fan that shows its front face and lighting inside the case.
- You want a 55cm cable setup for daisy-chaining PWM connections.
Skip if
- You require fan speeds exceeding 1500 RPM.
- You prefer standard forward airflow orientation.
Verdict: Thermalright 120mm Reverse Airflow ARGB Fan delivers targeted intake ventilation and ARGB lighting with a reverse-blade layout. Its 55cm PWM daisy-chain cable and S-FDB bearing make it a practical single-fan addition to your chassis.
Thermalright 120mm Reverse ARGB Fan
Best for: intake airflow with clean ARGB visuals
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500 RPM
- Max Airflow
- 58FM
- Static Pressure
- 1.31mm H2O
- Noise Level
- ≤ 23.2dBA
- Connector Type
- 4-pin PWM
This 120mm Thermalright unit is a reverse-blade case fan designed for intake positions where you want illuminated fan blades visible without showing the rear frame brackets. It features a 4-pin PWM connector, delivers up to 58 CFM of airflow at 1500 RPM, and produces noise levels at or below 23.2 dBA. It suits you if you need reverse airflow with motherboard-controlled addressable RGB lighting for your chassis or heatsink.
Pros
- Reverse fan blade design provides intake airflow while facing forward
- S-FDB fluid dynamic bearing reduces blade vibration
- Low noise ceiling rated at 23.2 dBA maximum
- Supports 4-pin PWM speed regulation up to 1500 RPM
Cons
- Static pressure is limited to 1.31 mm H2O
- Maximum airflow reaches 58 CFM
Good fit if
- You want an intake fan that keeps the clean blade side visible
- You require 4-pin PWM speed control with 5V ARGB lighting synchronization
- You need silent operation rated at 23.2 dBA or lower
Skip if
- You need high static pressure above 1.31 mm H2O for thick radiators
- You plan to mount the fan in a standard rear exhaust slot
Verdict: Thermalright 120mm Reverse ARGB Fan delivers intake airflow with exposed illuminated blades, making it a reliable pick for clean case aesthetics. Its 1500 RPM PWM motor and 23.2 dBA maximum noise keep your system balanced and quiet.
Thermalright 120mm ARGB PWM Fan
Best for: quiet case cooling with daisy-chained ARGB
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500RPM
- Max Airflow
- 47.6CFM
- Static Pressure
- 1.31mm H2O
- Noise Level
- ≤ 23.2dBA
- Connector Type
- 4pin pwm
This 120mm Thermalright fan delivers up to 47.6 CFM of airflow and 1.31 mm H2O static pressure at a maximum speed of 1500 RPM. You get built-in addressable RGB lighting, an S-FDB bearing designed to reduce blade vibration, and noise levels rated at 23.2 dBA or lower. Its 55 cm cable supports PWM series daisy-chaining, making it a dependable choice for standard chassis airflow and CPU heatsinks.
Pros
- Acoustic output rated at or below 23.2 dBA
- Long 55 cm cable allows PWM series daisy-chaining
- S-FDB bearing minimizes blade wobble and noise
- Integrated addressable RGB lighting
Cons
- Airflow tops out at 47.6 CFM
- Static pressure is limited to 1.31 mm H2O
Good fit if
- You want quiet case cooling operating at or below 23.2 dBA.
- You need extended 55 cm cabling to link fans in series across your chassis.
- You want integrated ARGB lighting synchronized via standard motherboard PWM headers.
Skip if
- You require static pressure higher than 1.31 mm H2O for dense water-cooling radiators.
- You need airflow volume greater than 47.6 CFM for heavy exhaust setups.
Verdict: Thermalright 120mm ARGB PWM Fan balances quiet 23.2 dBA operation with convenient 55 cm daisy-chain wiring. It delivers reliable general chassis airflow alongside customizable ARGB lighting.
Thermalright 120mm Dual Aperture ARGB Fan
Best for: quiet builds needing subtle dual-sided ARGB lighting
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500RPM
- Max Airflow
- 47.6CFM
- Static Pressure
- 1.31mm H2O
- Noise Level
- ≤ 23.2dBA
- Connector Type
- 4pin pwm
This Thermalright 120mm cooling fan features front and rear 0.6mm ARGB ring apertures and operates via a 4-pin PWM header. Running at up to 1500 RPM, it delivers 47.6 CFM of airflow and 1.31 mm H2O static pressure with a maximum noise level of 23.2 dBA. You will find it fits standard 120mm mounts, liquid radiators, or CPU heatsinks when you want subtle accent lighting and quiet, regulated airflow.
Pros
- Maximum noise level rated at or below 23.2 dBA
- Dual front and rear 0.6mm ARGB aperture rings
- S-FDB bearing stabilizes blade rotation
- 4-pin PWM control with speeds up to 1500 RPM
Cons
- Airflow tops out at 47.6 CFM
- Static pressure is limited to 1.31 mm H2O
- Available only in black finish
Good fit if
- You want thin front and back ARGB halo accents instead of fully illuminated blades.
- You need a quiet 120mm fan rated at 23.2 dBA or lower.
- You want 4-pin PWM speed control up to 1500 RPM.
Skip if
- You require high static pressure exceeding 1.31 mm H2O for dense radiators.
- You need high-volume case airflow exceeding 47.6 CFM.
- You prefer an all-white fan housing for your build.
Verdict: Thermalright 120mm Dual Aperture ARGB Fan provides balanced 47.6 CFM airflow with quiet S-FDB bearings and dual-sided slim accent lighting. It is a solid pick when you need low-noise 4-pin PWM cooling with discrete aesthetics.
Thermalright 120mm Slim ARGB Fan
Best for: compact cases needing slim clearance cooling
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500 RPM
- Max Airflow
- 52 CFM
- Static Pressure
- 1.24 mmH2O
- Noise Level
- 24.1 dBA
- Connector Type
- 4-pin PWM
This is a 120mm slim fan measuring 15mm thick with addressable RGB lighting. It runs up to 1500 RPM via a 4-pin PWM header, pushing up to 52 CFM of airflow at 1.24 mm H2O static pressure and 24.1 dBA noise. It suits you if you need a compact white cooling fan for tight clearances in small PC cases or on crowded CPU heatsinks.
Pros
- 15mm slim thickness fits tight enclosure clearances
- 4-pin PWM control with speeds up to 1500 RPM
- Motherboard-synchronized ARGB lighting with 17 modes
- Four vibration damping pads to reduce noise
Cons
- Maximum airflow reaches only 52 CFM
- Static pressure tops out at 1.24 mm H2O
Good fit if
- You need a 15mm low-profile fan for compact case clearances.
- You want motherboard-controlled ARGB lighting with PWM speed regulation.
- You want integrated corner pads to dampen vibration against mounting brackets.
Skip if
- You have space for thicker 25mm fans with higher static pressure.
- You need more than 52 CFM of maximum airflow for heavy ventilation.
Verdict: Thermalright 120mm Slim ARGB Fan delivers PWM-controlled cooling and motherboard ARGB lighting in a compact 15mm form factor. It provides a practical solution when standard 25mm case fans cannot clear your hardware.
Thermalright 120mm Slim White ARGB Fan
Best for: compact builds requiring slim ARGB cooling
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1500RPM
- Max Airflow
- 52CFM
- Static Pressure
- 1.24mm H2O
- Noise Level
- ≤24.1dBA
- Connector Type
- 4-pin PWM
This is a 120mm slim cooling fan measuring 15mm in thickness, designed for compact spaces. It connects via a 4-pin PWM header to run up to 1500 RPM, producing up to 52 CFM of airflow and 1.24 mm H2O of static pressure at 24.1 dBA or less. Addressable RGB lighting connects through a standard 5V 3-pin header. It suits you if you need a low-profile white fan for clearance-limited PC cases.
Pros
- Slim 15mm thickness fits tight clearance spaces
- Airflow rated up to 52 CFM at 1500 RPM
- Maximum noise level specified at 24.1 dBA
- Equipped with four vibration damping corner pads
Cons
- Lower static pressure than standard-depth fans at 1.24 mm H2O
- Sold as a single unit rather than a multi-pack
Good fit if
- You have tight clearance around your motherboard, RAM, or case panels.
- You need 5V 3-pin ARGB lighting synchronized through your motherboard.
- You want 4-pin PWM automatic speed control with low rated noise.
Skip if
- You have ample clearance for standard 25mm fans with higher airflow.
- You need a multi-fan bundle to outfit your entire enclosure.
Verdict: Thermalright 120mm Slim White ARGB Fan delivers a 15mm low-profile frame with PWM regulation and addressable lighting for tight clearances. It fits situations where standard 25mm case fans cannot clear adjacent components.
Thermalright 120mm White ARGB Case Fans (3-Pack)
Best for: white PC builds needing multi-fan ARGB cooling
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1550RPM
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- ≤ 25.6dBA
- Connector Type
- 4pin pwm
View on Amazon: Thermalright 120mm White ARGB Case Fans (3-Pack)
You get a three-pack of 120mm white ARGB fans designed for cases and CPU coolers. Each fan spins up to 1550 RPM, delivering up to 66.17 CFM of airflow and 1.53 mm H2O static pressure at noise levels up to 25.6 dBA. The 55 cm daisy-chainable PWM cables and S-FDB bearings make them suitable if you want coordinated white lighting and balanced cooling across multiple mounting locations.
Pros
- Airflow rating of 66.17 CFM at maximum speed
- Static pressure of 1.53 mm H2O
- 55 cm cable supports PWM series daisy-chaining
- S-FDB bearings rated for 25.6 dBA maximum noise
Cons
- Standard 25 mm thickness limits fit in ultra-slim chassis
- Maximum rotational speed tops out at 1550 RPM
Good fit if
- You need a three-pack of white 120mm fans with addressable RGB lighting.
- You want 55 cm daisy-chain PWM cables to link multiple fans to one header.
- You require balanced airflow up to 66.17 CFM for case ventilation or radiators.
Skip if
- You need high-speed fans exceeding 1550 RPM for extreme cooling demands.
- You prefer an all-black fan setup to match a dark chassis.
Verdict: Thermalright 120mm White ARGB Case Fans (3-Pack) provides solid 66.17 CFM airflow, daisy-chain PWM wiring, and synchronized motherboard lighting for multi-fan white builds. It delivers standard 25 mm cooling performance without unnecessary installation complexity.
Thermalright 120mm ARGB PWM Fans 5-Pack
Best for: full case airflow upgrades on standard builds
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1550RPM±10%
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- ≤ 25.6dBA
- Connector Type
- 4pin pwm
This five-pack gives you 120mm cooling fans equipped with S-FDB bearings and addressable RGB lighting. Each fan delivers up to 66.17 CFM of airflow and 1.53 mm H2O of static pressure at a maximum speed of 1550 RPM, keeping rated noise under 25.6 dBA. If you need to populate an entire mid-tower or liquid cooler setup with synchronized 4-pin PWM fans, this bundle covers your case in one package.
Pros
- Delivers up to 66.17 CFM airflow and 1.53 mm H2O static pressure
- S-FDB fluid dynamic bearings designed to reduce blade wobble
- Includes a 55 cm cable configured for PWM series daisy-chaining
- Maximum rated acoustic noise level of 25.6 dBA
Cons
- Standard 25 mm thickness does not fit slim-clearance mounting spots
- Maximum rotational speed is limited to 1550 RPM
Good fit if
- You need five matching 120mm ARGB fans to fill a standard case.
- You want 4-pin PWM speed control that syncs through motherboard temperature headers.
- You prefer daisy-chaining fan cables with up to 55 cm of reach.
Skip if
- You need slim 15mm fans for tight clearance mini-ITX enclosures.
- You require high-speed fans operating above 1550 RPM.
Verdict: Thermalright 120mm ARGB PWM Fans 5-Pack provides five synchronized 120mm fans with S-FDB bearings and motherboard ARGB control. It equips full-case airflow setups without needing to source individual units.
Thermalright 120mm White ARGB Case Fan 5-Pack
Best for: Outfitting an all-white case with matching fans
- Fan Size
- 120mm (what this guide is about)
- Max Fan Speed
- 1550RPM±10%
- Max Airflow
- 66.17CFM
- Static Pressure
- 1.53mm H2O
- Noise Level
- ≤ 25.6dBA
- Connector Type
- 4pin pwm
View on Amazon: Thermalright 120mm White ARGB Case Fan 5-Pack
This five-pack gives you 120mm white cooling fans equipped with addressable RGB lighting. Each fan delivers up to 66.17 CFM airflow and runs at speeds up to 1550 RPM using 4-pin PWM control. Fluid dynamic bearings maintain operational stability while keeping noise output under 25.6 dBA. You will find this set practical if you need multiple matching intake or exhaust units for an all-white chassis build without buying individual fans.
Pros
- Delivers up to 66.17 CFM airflow at 1550 RPM
- Fluid dynamic bearing designed for stable blade rotation
- Long 55cm cable configuration supports series PWM connection
- Addressable RGB lighting syncs directly with motherboard headers
Cons
- Static pressure tops out at 1.53 mm H2O
- Standard 25mm depth fits standard slots but not slim-only spaces
Good fit if
- You need five matching white 120mm fans for a full case setup.
- You want automatic motherboard fan speed curves via 4-pin PWM headers.
Skip if
- You need slim 15mm fans for a tight small-form-factor chassis.
- You prefer an all-black aesthetic for your internal hardware.
Verdict: Thermalright 120mm White ARGB Case Fan 5-Pack delivers balanced 66.17 CFM airflow and PWM control across five coordinated white fans. It serves as an efficient multi-fan cooling setup for standard case enclosures.
Specifications side by side
| Spec | Thermalright 120mm Slim ARGB Fan | Thermalright 120mm White ARGB Fan 3-Pack | Thermalright 120mm ARGB Case Fan | Thermalright 120mm PWM Case Fan | Thermalright 120mm ARGB PWM Fan | Thermalright 120mm Reverse Airflow ARGB Fan | Thermalright 120mm Reverse ARGB Case Fan | Thermalright 120mm Reverse ARGB Fan | Thermalright 120mm ARGB PWM Fan | Thermalright 120mm Dual Aperture ARGB Fan | Thermalright 120mm Slim ARGB Fan | Thermalright 120mm Slim White ARGB Fan | Thermalright 120mm White ARGB Case Fans (3-Pack) | Thermalright 120mm ARGB PWM Fans 5-Pack | Thermalright 120mm White ARGB Case Fan 5-Pack |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fan Size | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm |
| Max Fan Speed | 1500RPM | 1550RPM | 1550RPM | 1550RPM | 1500RPM | 1500 RPM | 1500 RPM | 1500 RPM | 1500RPM | 1500RPM | 1500 RPM | 1500RPM | 1550RPM | 1550RPM±10% | 1550RPM±10% |
| Max Airflow | 52CFM | 66.17CFM | 66.17CFM | 66.17CFM | 66.17CFM | 47.6 CFM | not specified | 58FM | 47.6CFM | 47.6CFM | 52 CFM | 52CFM | 66.17CFM | 66.17CFM | 66.17CFM |
| Static Pressure | 1.24mm H2O | 1.53mm H2O | 1.53mm H2O | 1.53mm H2O | 1.53mm H2O | 1.31mm H2O | not specified | 1.31mm H2O | 1.31mm H2O | 1.31mm H2O | 1.24 mmH2O | 1.24mm H2O | 1.53mm H2O | 1.53mm H2O | 1.53mm H2O |
| Noise Level | ≤24.1dBA | 25.6dBA | ≤ 25.6dBA | ≤ 25.6dBA | ≤ 25.6dBA | ≤ 23.2dBA | not specified | ≤ 23.2dBA | ≤ 23.2dBA | ≤ 23.2dBA | 24.1 dBA | ≤24.1dBA | ≤ 25.6dBA | ≤ 25.6dBA | ≤ 25.6dBA |
| Connector Type | 4-pin PWM | 4pin PWM | 4pin PWM | 4pin PWM | 4PIN PWM | 4-pin PWM | 4-pin PWM | 4-pin PWM | 4pin pwm | 4pin pwm | 4-pin PWM | 4-pin PWM | 4pin pwm | 4pin pwm | 4pin pwm |
| Bearing Type | not specified | S-FDB | S-FDB | S-FDB | S-FDB | S-FDB | S-FDB | S-FDB | S-FDB | S-FDB | not specified | not specified | S-FDB | S-FDB | S-FDB |
| Lighting Type | ARGB | ARGB | ARGB | not specified | 3PIN ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | 5V 3-pin ARGB | ARGB | ARGB | ARGB |
| Blade Direction | not specified | not specified | not specified | not specified | not specified | Reverse | Reverse | Reverse | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Lighting | ARGB | ARGB | ARGB | not specified | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Compatible Device | CPU Cooler | not specified | not specified | not specified | not specified | not specified | not specified | not specified | CPU Cooler | CPU Cooler | CPU Cooler | CPU Cooler | CPU Cooler | not specified | not specified |
| Dimensions | 0.59 × 4.72 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.59 × 4.72 inches | 4.72 × 0.59 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.98 inches |
| Weight | 3.53 ounces | 3.53 ounces | not specified | 3.53 ounces | 3.53 ounces | not specified | not specified | 3.53 ounces | 3.53 ounces | 3.53 ounces | 3.53 ounces | 3.53 ounces | not specified | 3.53 ounces | not specified |
| Model | TL-C12015W-S | TL-C12CW-S X3 D6 | TL-C12CW-S X3 | TL-C12C | TL-C12C-S X3 | C12RW-S V2 | C12RB-S V2 D6 | C12RB-S V2 | TL-S12 X3 | TL-S12-S X3 | TL-C12015W-S D6 | C12015W-S-D1 | not specified | TL-C12C-S X5-D2 | not specified |
| Size | not specified | not specified | 120*120*25mm | not specified | not specified | not specified | not specified | C12RB-S V2-D2 | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color | not specified | not specified | TL-C12CW-S X3 | not specified | TL-C12C-S X3 | TLC12RW-S V2 | not specified | BLACK | BLACK | BLACK | not specified | not specified | TL-C12CW-S X3 | TL-C12C-S X5 | TL-C12CW-S X5 |
If you want identical fan dimensions for processor cooling, compare specifications in our guide to the best CPU coolers with 120mm Fan.
How to Choose Thermalright 120mm Fans
-
Compare Maximum Airflow Ratings
Check CFM specs. Standard models push 66.17 CFM for general chassis ventilation. Accent-focused models like the Thermalright 120mm Dual Aperture ARGB Fan deliver 47.6 CFM. If you need powerful intake through mesh panels or heatsinks, look for higher CFM values. If you prioritize subtle illumination and secondary case airflow, lower CFM ratings provide adequate cooling. Compare the published CFM on the spec sheet against the cooling demands of your internal components to pick the right balance.
-
Check Decibel Noise Ratings
Fan acoustic output dictates system quietness. Thermalright listings specify noise ceilings, such as 23.2 dBA on the Thermalright 120mm ARGB PWM Fan or up to 25.6 dBA on standard high-airflow models. Lower decibel ratings ensure quieter operation during sustained workloads. If your case sits near your ears on a desk, prioritize models rated around 23.2 dBA. Compare the maximum decibel spec to keep system sound within your comfort zone while maintaining reliable chassis ventilation.
-
Select Single or Multipack Sets
Consider the number of open fan slots in your chassis before ordering. Thermalright offers units individually, in 3-packs, and in 5-packs. Choosing a bundle like the Thermalright 120mm ARGB PWM Fans 5-Pack allows you to populate entire intake and exhaust layouts with matching specifications and aesthetic styling. Single fans work better when replacing a broken unit or filling an odd remaining mounting location. Count your case mounts and match the purchase quantity to your setup needs.
-
Evaluate Daisy Chain Wiring
Cable routing depends heavily on fan connector designs. Several Thermalright models feature built-in 55cm PWM daisy-chain cables that allow you to connect multiple fans in series. The Thermalright 120mm Reverse ARGB Case Fan uses this cabling to link fan power directly between units. This reduces the number of separate motherboard headers required to run your cooling array. If your motherboard has limited 4-pin headers, look for series-capable wiring to keep your cable routing organized and simple.
-
Verify Fluid Dynamic Bearings
Internal bearing design influences operational stability and mechanical lifespan. Many Thermalright 120mm fans feature Fluid Dynamic Bearings (FDB) or S-FDB technology. For example, the Thermalright 120mm White ARGB Fan 3-Pack utilizes a fluid dynamic bearing to maintain smooth rotation up to 1550 RPM. This internal structure keeps the rotating shaft lubricated, reducing vibration during high-speed operation. When selecting fans for long-term chassis duty or heatsink cooling, check the bearing specifications to ensure reliable continuous performance.
-
Match Chassis Frame Color
Case aesthetics require consistent color coordination across your cooling hardware. Thermalright produces these 120mm fans in dedicated black and white variants. The Thermalright 120mm White ARGB Case Fan 5-Pack provides matching white frames and blades specifically suited for light-colored chassis builds. Standard black housings blend naturally into traditional dark enclosures. Check your internal case coating, motherboard shade, and radiator paint before choosing a model to ensure the fan housing visually complements your build theme.
Frequently asked questions
What bearing type do Thermalright 120mm fans use?
Thermalright 120mm case fans primarily use fluid dynamic bearings, often listed as S-FDB. This design minimizes internal friction, maintaining rotational stability and durability across standard speeds like 1500 or 1550 RPM. Models such as the TL-C12C, TL-C12C-S, and TL-S12-S incorporate these bearings to support steady chassis cooling while keeping operating friction low.
What maximum speeds do Thermalright 120mm case fans reach?
Thermalright 120mm case fans typically reach top speeds between 1500 RPM and 1550 RPM at full 12-volt load. Models like the TL-C12CW-S X3 D6 operate up to 1550 RPM, while models like the C12RW-S V2 and C12RB-S V2 top out at 1500 RPM. Using 4-pin PWM headers, you can scale these speeds down across custom fan curves.
How loud are Thermalright 120mm case fans during operation?
Thermalright 120mm case fans feature low noise ratings, with specified models peaking between 23.2 dBA and 25.6 dBA. The C12RB-S V2 and TL-S12 X3 models list a maximum noise output of 23.2 dBA under load. Meanwhile, the TL-C12C-S X3 reaches up to 25.6 dBA, providing moderate acoustics during sustained chassis ventilation.
What cable connection do Thermalright 120mm fans use for motherboard control?
Thermalright 120mm fans use standard 4-pin PWM connectors to communicate with your motherboard fan headers. This 4-pin interface enables automatic speed modulation based on chassis or component temperature sensors. Several models, including the C12RB-S V2 D6 and TL-S12 X3, also feature integrated 55cm daisy-chain cabling to link multiple fan headers together neatly.
What is dual aperture ARGB lighting on Thermalright fans?
Dual aperture ARGB lighting refers to slim accent rings built into both the front and rear outer frame edges. The Thermalright TL-S12-S X3 uses this design to display synchronized lighting from both sides of the chassis mount. This configuration leaves the main fan blades dark while providing 47.6 CFM airflow and fluid dynamic bearing stability.
What multipack options are available for Thermalright 120mm fans?
Thermalright offers 120mm fans in single units, 3-packs, and 5-packs to accommodate different build scales. Three-pack bundles like the TL-C12CW-S X3 and TL-S12 X3 provide multiple synchronized units for intake or exhaust arrays. For full enclosure replacements, 5-pack sets such as the TL-C12C-S X5 and TL-C12CW-S X5 supply matched cooling fans across all primary brackets.
Can Thermalright 120mm case fans be mounted on CPU coolers?
Yes, several Thermalright 120mm fan models specify compatibility with CPU coolers alongside standard chassis installation. Models like the TL-C12015W-S, TL-S12 X3, and TL-C12CW-S X3 support installation on heatsinks using standard 120mm fan clips or brackets. Their 4-pin PWM connectors plug directly into your motherboard CPU_FAN header for thermal speed management.