Looking Beyond the ASUS TUF Gaming GT501 E-ATX Full-Tower PC Case? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are evaluating ASUS TUF Gaming GT501 E-ATX full tower PC case alternatives, you likely want spacious component layout and high cooling capacity. The original GT501 delivers solid fundamentals. It includes a metal chassis, a 4mm smoked tempered-glass side panel, and woven-cotton carry handles rated for up to 65 pounds. The case comes equipped with three 120mm Aura Sync RGB fans, a 140mm rear PWM fan, and room for front or top 360mm radiators alongside E-ATX motherboards and vertical GPU mounting.
You might look elsewhere if your build requires different specifications, dimensions, or aesthetics. You may prefer a chassis that accepts dual 420mm radiators, pre-installed 140mm intake fans, or a dual-chamber layout. Other builders might prefer an alternative brand, a lighter chassis than the 26.2-pound GT501, or a mid-tower footprint. The 6 alternatives below were selected because their core hardware specifications directly overlap with the original, offering robust motherboard support, multi-radiator cooling options, and pre-installed fans for your next system.
Our top pick: ASUS TUF Gaming E-ATX Full-Tower Case.
Comparing ASUS TUF GT501 Alternatives
Fractal Design North XL Mesh Full-Tower Case
The Fractal Design North XL Mesh provides three larger 140mm PWM intake fans compared to the three 120mm front fans on the ASUS TUF GT501. It also adds Type-C connectivity and weighs only 11 pounds, making it far lighter than the 26.2-pound GT501. However, you give up the integrated woven-cotton carry handles, pre-drilled water pump mounts, and smoked tempered-glass side panel found on the ASUS chassis. It also omits integrated RGB fan lighting. You should pick the North XL Mesh if you want higher-diameter 140mm airflow, modern Type-C port access, and a lightweight frame for your E-ATX motherboard without RGB lighting.
Anidees AI Crystal XL Full Tower
The Anidees AI Crystal XL offers a substantially larger internal space than the ASUS TUF GT501, accommodating oversized liquid cooling hardware and extensive radiator configurations. At 44.1 pounds and standing 23.4 inches tall, this chassis provides a much larger footprint than the 26.2-pound GT501. In exchange, you lose the GT501's convenient woven-cotton transport handles, making the heavier Anidees model strictly stationary. You also give up the GT501's bundled Aura Sync RGB fans and vertical GPU mounting slot. You should choose the AI Crystal XL if you need maximum room for expansive custom loops and large workstation motherboards rather than portable gaming features.
Lian Li LANCOOL III E-ATX Mid-Tower Case
The Lian Li LANCOOL III upgrades stock cooling by including four 140mm PWM fans, giving you larger intake fans than the three 120mm front units on the ASUS TUF GT501. It also provides integrated RGB lighting with hinged tempered glass panels for cleaner component access and cable concealment. However, it is a mid-tower rather than a full-tower chassis and weighs slightly more at 31.1 pounds versus 26.2 pounds. It lacks the GT501's woven-cotton carry handles and vertical GPU bracket. You should choose the LANCOOL III if you want larger 140mm fans and hinged panel access for an E-ATX build and do not need transport straps.
ASUS ROG Hyperion E-ATX Full-Tower Case
The ASUS ROG Hyperion steps far above the TUF GT501 in extreme cooling capability, accommodating dual 420mm radiators where the GT501 maxes out at 360mm radiators. It also features a heavy-duty aluminum structure. However, this extra capacity makes the case massive and substantially heavier, weighing 55 pounds dry compared to the 26.2-pound GT501. It also omits the GT501's woven carry handles, making it much harder to relocate. You should choose the ROG Hyperion if you are planning an extreme build that requires dual 420mm liquid cooling loops and rigid aluminum construction, and you have dedicated desk space that never requires moving the system.
Antec Flux Pro Full-Tower Case with 6 Fans
The Antec Flux Pro includes six pre-installed fans out of the box, outfitting your system with two more stock fans than the four included with the ASUS TUF GT501. It is designed for multi-radiator cooling setups with high internal airflow and includes integrated component monitoring. On the other hand, it weighs 29 pounds, lacks the GT501's woven-cotton carry handles, and skips the GT501's Aura Sync RGB front fans and smoked tempered-glass exterior aesthetic. You should choose the Flux Pro if your E-ATX build prioritizes out-of-the-box airflow from six fans and high ventilation over RGB lighting and portable transport handles.
darkFlash Full-Tower ATX Case with ARGB Fans
The darkFlash Full-Tower case features a dual-chamber design with pre-installed ARGB fans, 410mm graphics card clearance, and support for dual 360mm radiators. At 22 pounds, it is also lighter than the 26.2-pound ASUS TUF GT501. What you give up is motherboard size compatibility: this model supports standard ATX boards and omits the GT501's E-ATX support. You also lose the woven-cotton carry handles and 140mm rear PWM fan found on the GT501. You should pick this darkFlash chassis if you are building an ATX system that needs dual 360mm radiator clearance and ARGB illumination rather than wide E-ATX motherboard clearance.
Quick picks
Our 7 picks
ASUS TUF Gaming E-ATX Full-Tower Case
Best for: portable E-ATX liquid-cooled gaming setups
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Side Panel
- Tempered Glass
- Radiator Support
- 360mm
- Use
- Gaming
- Dimensions
- 215 × 98.8 × 217 inches
The ASUS TUF Gaming GT501 is a full-tower gaming chassis built for large builds and portability. It supports E-ATX motherboards and comes equipped with three 120mm RGB fans plus a 140mm rear PWM exhaust fan. You get mounting clearance for 360mm radiators at the top or front, alongside integrated woven-cotton carry handles rated up to 65 pounds. It suits builders seeking expansive component space with ready-to-use cooling and built-in transport straps.
Pros
- Includes three 120mm RGB fans and one 140mm rear PWM fan
- Supports 360mm radiators on both top and front mounts
- Woven-cotton carry handles rated for loads up to 65 pounds
- Pre-drilled mounting holes for custom liquid-cooling pumps and reservoirs
Cons
- Heavy bare chassis weight at 26.2 pounds
- Radiator compatibility tops out at 360mm without 420mm support
Good fit if
- You want integrated woven handles capable of carrying up to 65 pounds
- You plan to run an E-ATX motherboard with custom liquid cooling
- You need four pre-installed fans straight out of the box
Skip if
- You need a lightweight case below 26 pounds before installing components
- You plan to mount radiators larger than 360mm
Verdict: ASUS TUF Gaming GT501 Full-Tower Case delivers generous E-ATX space, four bundled fans, and rugged woven carry handles for easier transport. It remains a dependable choice for liquid cooling setups that fit within standard 360mm mounting footprints.
Fractal Design North XL Mesh Full-Tower Case
Best for: high-airflow builds needing large component clearance
- Motherboard Support
- E-ATX, ATX, mATX, mITX
- Case Type
- Full Tower
- Side Panel
- Mesh
- Radiator Support
- 420mm
- Max GPU Length
- 413mm
- Fan Size
- 140mm
View on Amazon: Fractal Design North XL Mesh Full-Tower Case
The Fractal Design North XL Mesh is a full-tower case supporting motherboards from Mini-ITX up to E-ATX. You get three 140 mm Aspect PWM fans right out of the box, a breathable mesh side panel, and wood exterior accents. With room for graphics cards up to 413 mm and front radiators up to 420 mm, it suits builders who want high airflow and large component clearance.
Pros
- Includes three 140 mm Aspect PWM fans
- Supports front radiators up to 420 mm
- Accommodates graphics cards up to 413 mm long
- Front I/O features Type-C connectivity
Cons
- GPU clearance drops to 380 mm when using a 420 mm front radiator
- Mesh side panel does not offer clear window visibility
- Top radiator support is limited to 360 mm
Good fit if
- You need room for large hardware like an E-ATX board or a 413 mm GPU.
- You want three pre-installed 140 mm PWM fans for airflow.
- You plan to mount a 420 mm liquid cooling radiator in the front.
Skip if
- You want a transparent tempered glass side panel to display your build.
- You plan to install a 420 mm radiator at the top of the case.
Verdict: Fractal Design North XL Mesh Full Tower delivers expansive hardware clearance and strong cooling potential with three included 140 mm PWM fans. It provides a capable, ventilated setup for large motherboards and long graphics cards.
Anidees AI Crystal XL Full Tower
Best for: extreme custom water cooling and HPTX builds
- Motherboard Support
- HPTX, XL-ATX, E-ATX, ATX, m-ATX
- Case Type
- Full Tower
- Radiator Support
- 480 mm
- Max GPU Length
- 530 mm
- Side Panel
- Tempered Glass
- Use
- Gaming
The Anidees AI Crystal XL Full Tower gives you an expansive chassis built for massive cooling setups and motherboards up to HPTX. You get support for up to twenty 120 mm fans, dual 480 mm radiators, and graphics cards measuring up to 530 mm. It includes interchangeable mesh and tempered glass front panels. This chassis suits you if you need maximum liquid cooling capacity or extensive drive storage.
Pros
- Supports up to twenty 120 mm fans and dual 480 mm radiators
- Accommodates extra-large motherboards including HPTX and XL-ATX
- Includes both mesh and tempered glass front panels
- Fits graphics cards up to 530 mm and CPU coolers up to 190 mm
Cons
- Heavy empty chassis weight of 44.1 pounds
- Vertical graphics card thickness limited to 49 mm
Good fit if
- You run an HPTX, XL-ATX, or E-ATX motherboard.
- You plan an extensive liquid cooling loop with 480 mm radiators.
- You need mounting space for up to 12 storage drives.
Skip if
- You want a lightweight case that is easy to move.
- You plan to mount a vertical graphics card thicker than 49 mm.
Verdict: Anidees AI Crystal XL Full Tower delivers immense internal room for oversized motherboards and extreme radiator configurations. It provides exceptional expansion flexibility if you build large liquid-cooled workstations or high-end systems.
Lian Li LANCOOL III E-ATX Mid-Tower Case
Best for: high-airflow builds needing pre-installed 140mm RGB fans
- Motherboard Support
- E-ATX, ATX, Micro-ATX, Mini-ITX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4 x 140mm PWM
- Use
- Gaming
- Lighting
- RGB
The Lian Li LANCOOL III RGB Mid-Tower Case provides extensive airflow and lighting features in a mid-tower format. You get four included 140mm PWM fans, built-in RGB lighting, and fine mesh panels to cool high-heat setups. It supports E-ATX motherboards up to 280mm wide and holds up to twelve 2.5-inch drives. This chassis suits you if you want factory-installed 140mm fans, hinged glass panels, and dedicated cable management doors without stepping up to a full tower.
Pros
- Includes four 140mm PWM fans out of the box
- Hinged 4.0mm tempered glass side panels with aluminum handles
- Supports up to twelve 2.5-inch solid-state drives
- Toolless magnetic cable cover doors on the wiring side
Cons
- E-ATX motherboard width is limited to under 280mm
- Empty chassis weighs 31.1 pounds
Good fit if
- You want four pre-installed 140mm PWM fans alongside integrated RGB lighting.
- You need high-density drive storage for up to 12 SSDs or mixed drive configurations.
- You prefer hinged tempered glass doors and magnetic covers for quick access and cable routing.
Skip if
- You plan to install an E-ATX motherboard wider than 280mm.
- You need a lightweight chassis that is easy to move.
Verdict: Lian Li LANCOOL III RGB Mid-Tower Case combines four 140mm PWM fans and integrated RGB lighting with hinged panels and deep drive capacity. It offers practical airflow and clean cable concealment for standard and compact E-ATX configurations.
ASUS ROG Hyperion E-ATX Full-Tower Case
Best for: dual-420mm liquid cooling and heavy hardware builds
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Radiator Support
- 420mm
- Use
- Gaming
- Dimensions
- 25.9 × 10.6 × 25.2 inches
- Weight
- 55 pounds
The ASUS ROG Full-Tower E-ATX PC Case is a heavy-duty chassis built for large components and extensive liquid cooling. It accommodates E-ATX motherboards and up to two 420mm radiators simultaneously. You get a diecast aluminum-alloy frame with integrated 80kg-rated carry handles, dual front USB Type-C ports supporting 60W charging, and a built-in graphics card holder. This setup suits you if you plan an oversized custom cooling loop or a multi-radiator build.
Pros
- Supports up to two 420mm radiators
- Diecast aluminum handles support up to 80kg
- Two front USB Type-C ports with 60W fast charging
- Built-in GPU holder supports vertical and horizontal mounting
- Hinged tool-free side panel and integrated storage drawer
Cons
- Weighs 55 pounds unpopulated
- Large 25.9-inch length requires substantial desk clearance
- No pre-installed fans listed in specifications
Good fit if
- You plan to mount dual 420mm liquid cooling radiators.
- You need heavy-duty integrated carry handles rated up to 80kg.
- You require front-panel USB Type-C ports with 60W power delivery.
Skip if
- You need a lightweight chassis that weighs under 55 pounds.
- You have a compact desk space unable to fit a 25.9-inch depth.
Verdict: ASUS ROG Full-Tower E-ATX PC Case provides massive dual 420mm cooling capacity and a rigid aluminum structure for extreme setups. Its 55-pound dry weight requires substantial desk space and careful placement.
Antec Flux Pro Full-Tower Case with 6 Fans
Best for: high-airflow multi-radiator E-ATX PC builds
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Included Fans
- 6 PWM fans
- Radiator Support
- 420mm
- Dimensions
- 20.9 × 9.64 × 21.5 inches
- Weight
- 29 pounds
The Antec Flux Pro is a full-tower E-ATX chassis built from metal, glass, and wood accents. It comes with six pre-installed PWM fans, a built-in CPU and GPU dual temperature display, and support for up to twelve total fans. It accommodates simultaneous 420mm and 360mm radiators via removable cooling brackets. This case suits you if you need extensive liquid cooling capacity, out-of-the-box airflow, and integrated hardware temperature monitoring.
Pros
- Includes six pre-installed PWM fans across the front, PSU shroud, and rear
- Supports simultaneous installation of a 420mm radiator and a 360mm radiator
- Features an integrated dual temperature display for CPU and GPU readouts
- Provides removable cooling brackets on the top, front, and PSU shroud
Cons
- Heavy empty chassis weight at 29 pounds
- Large physical footprint measuring 21.5 inches high and 20.9 inches long
Good fit if
- You run large liquid cooling setups requiring dual 420mm and 360mm radiators.
- You want ample stock airflow provided by six pre-installed PWM fans.
- You want built-in hardware temperature monitoring visible on the case.
Skip if
- You need a lightweight chassis that is easy to relocate.
- You have limited desk clearance for a 21.5-inch tall tower.
Verdict: Antec Flux Pro E-ATX Full-Tower Case provides heavy-duty cooling support with capacity for simultaneous massive radiators and six included fans. It is a capable choice for expansive E-ATX systems requiring high ventilation and integrated component monitoring.
darkFlash Full-Tower ATX Case with ARGB Fans
Best for: ATX builds needing dual 360mm radiators
- Motherboard Support
- ATX
- Case Type
- Full-Tower
- Included Fans
- 4x PWM ARGB
- Radiator Support
- 360mm
- Max GPU Length
- 410mm
- Use
- Gaming
View on Amazon: darkFlash Full-Tower ATX Case with ARGB Fans
The darkFlash Full-Tower ATX Case with ARGB Fans provides a dual-chamber layout with top-angled glass for viewing your build. Unlike larger alternatives that take E-ATX boards, this chassis focuses on standard ATX and back-connect ATX motherboards. It includes four PWM ARGB fans, houses graphics cards up to 410mm long, and fits dual 360mm radiators. It suits you if you want a display-oriented build with high GPU and radiator clearance without needing E-ATX support.
Pros
- Includes four PWM ARGB fans
- Supports graphics cards up to 410mm long
- Fits dual 360mm radiators
- Supports back-mounted ATX motherboards
Cons
- RGB hub controller is not included
- Motherboard support limited to standard ATX rather than E-ATX
Good fit if
- You use an ATX or back-connect ATX motherboard
- You need clearance for graphics cards up to 410mm long
- You plan to mount dual 360mm radiators
Skip if
- You require an E-ATX motherboard tray
- You want an included RGB hub controller
Verdict: darkFlash Full-Tower ATX Case with ARGB Fans delivers generous 410mm GPU clearance and dual 360mm radiator support in a dual-chamber ATX footprint.
Specifications side by side
| Spec | ASUS TUF Gaming E-ATX Full-Tower Case | Fractal Design North XL Mesh Full-Tower Case | Anidees AI Crystal XL Full Tower | Lian Li LANCOOL III E-ATX Mid-Tower Case | ASUS ROG Hyperion E-ATX Full-Tower Case | Antec Flux Pro Full-Tower Case with 6 Fans | darkFlash Full-Tower ATX Case with ARGB Fans |
|---|---|---|---|---|---|---|---|
| Motherboard Support | E-ATX | E-ATX, ATX, mATX, mITX | HPTX, XL-ATX, E-ATX, ATX, m-ATX | E-ATX, ATX, Micro-ATX, Mini-ITX | E-ATX | E-ATX | ATX |
| Case Type | Full-Tower | Full Tower | Full Tower | Mid-Tower | Full-Tower | Full-Tower | Full-Tower |
| Side Panel | Tempered Glass | Mesh | not specified | Tempered Glass | not specified | not specified | not specified |
| Included Fans | not specified | not specified | not specified | 4 x 140mm PWM | not specified | 6 PWM fans | 4x PWM ARGB |
| Radiator Support | 360mm | 420mm | 480 mm | not specified | 420mm | 420mm | 360mm |
| Max GPU Length | not specified | 413mm | 530 mm | not specified | not specified | not specified | 410mm |
| Tower Size | Full-Tower | Full-Tower | Full-Tower | not specified | Full-Tower | Full-Tower | Full-Tower |
| Fan Size | not specified | 140mm | not specified | not specified | not specified | not specified | not specified |
| Use | Gaming | Gaming | Gaming | Gaming | Gaming | not specified | Gaming |
| Lighting | not specified | not specified | not specified | RGB | not specified | not specified | ARGB |
| Connectivity | not specified | Type-C | not specified | not specified | not specified | not specified | not specified |
| Compatible Device | not specified | not specified | Radiator | not specified | not specified | not specified | not specified |
| Dimensions | 215 × 98.8 × 217 inches | 19.8 × 9.4 × 20 inches | 24.4 × 9.25 × 23.4 inches | 25.9 × 23 × 12.9 inches | 25.9 × 10.6 × 25.2 inches | 20.9 × 9.64 × 21.5 inches | 18.7 × 11.8 × 19.6 inches |
| Weight | 26.2 pounds | 11 pounds | 44.1 pounds | 31.1 pounds | 55 pounds | 29 pounds | 22 pounds |
| Size | EATX | XL | not specified | Mid-tower Case | GR701|Black | not specified | 18.66''L x 11.77''W x 19.6''H |
| Color | GT501|Grey | Chalk White | Black | Black | Hyperion GR701|Black | White | Black |
| Model | GT501/GRY/WITH HANDLE | FD-C-NOR1X-03 | AI-XL-PRO-LITE | PC-LAN3RX | GR701 ROG HYPERION | FLUX PRO WHITE | DY470 |
If you decide against a full tower build, you can compare hardware specs across the best ASUS gaming laptops.
Frequently asked questions
Which ASUS TUF GT501 alternative supports dual 420mm radiators?
The ASUS ROG Hyperion E-ATX Full-Tower Case supports dual 420mm radiators. It accommodates heavy hardware builds and provides an aluminum structure for extreme cooling configurations. At 55 pounds dry weight, it measures 10.6 inches wide, 25.2 inches high, and 25.9 inches long, demanding significantly more room than standard full towers.
Are all full-tower alternatives compatible with E-ATX motherboards?
No, not all full-tower alternatives accommodate E-ATX motherboards. While models like the Antec Flux Pro and Anidees AI Crystal XL support E-ATX, the darkFlash Full-Tower ATX Case only supports standard ATX boards. You must verify motherboard specifications carefully if you plan to install wider enthusiast motherboards in a full-tower chassis.
Which alternative comes with the most pre-installed cooling fans?
The Antec Flux Pro Full-Tower Case includes the most pre-installed cooling fans on this list. It comes equipped with six factory fans to maximize case ventilation right out of the box. In comparison, the Lian Li LANCOOL III provides four 140mm PWM fans, while the Fractal Design North XL Mesh includes three 140mm PWM fans.
Which GT501 alternative offers built-in RGB lighting right out of the box?
Both the Lian Li LANCOOL III and the darkFlash Full-Tower case include integrated lighting. The Lian Li LANCOOL III features four pre-installed 140mm PWM RGB fans with tempered glass panels to display your build. The darkFlash full-tower model includes pre-installed ARGB fans alongside a dual-chamber chassis layout for displaying internal hardware.
Can you install an E-ATX motherboard in a mid-tower case?
Yes, you can fit an E-ATX motherboard into select mid-tower models like the Lian Li LANCOOL III. Although classified as a mid-tower, the LANCOOL III specifically provides E-ATX motherboard support. It measures 23 inches wide, 12.9 inches high, and 25.9 inches long, allowing you to run wider boards without stepping up to a full-tower footprint.
What is the best alternative for extreme water cooling and oversized motherboards?
The Anidees AI Crystal XL Full Tower is engineered specifically for extreme water cooling and oversized motherboards. It features tempered glass side panels and provides expansion flexibility for HPTX platforms alongside extensive custom liquid cooling setups. Weighing 44.1 pounds, its chassis measures 9.25 inches wide, 23.4 inches high, and 24.4 inches long.
What maximum graphics card clearance does the darkFlash full-tower case provide?
The darkFlash Full-Tower ATX Case provides up to 410mm of graphics card clearance. This chassis also supports dual 360mm radiators within its dual-chamber layout. Its exterior dimensions measure 11.8 inches wide, 19.6 inches high, and 18.7 inches long, giving you ample room for long modern GPUs in an ATX gaming configuration.