upHere 120mm RGB Case Fan Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This uphere 120mm RGB series case review focuses on the upHere 120mm RGB Case Fan 5-Pack. It is a quiet edition high-airflow LED fan designed for PC cases. The product features a 120mm fan size tuned for large volume cooling. It uses hydraulic bearings and rubber pads to reduce operating noise. The lighting is RGB, powered by a 6-pin interface for reliable output. You can install these fans in two ways, blowing warm air out or drawing cool air in. This listing provides a practical look at what these specifications mean for your build.
What stands out
- 120mm fan size tuned for high airflow and large volume cooling
- Hydraulic bearing type with rubber pads to reduce operating noise
- RGB lighting powered by a 6-pin interface for safe output
- Two-way installation option for intake or exhaust airflow
Who it fits
Good fit for
This fan suits builders who need quiet cooling with visible RGB lighting. The hydraulic bearing and rubber pads make it a good fit for cases where noise matters. If you want high airflow for large volume cooling, the 120mm design delivers. The 6-pin RGB interface works well if your motherboard supports it. You can use these fans for intake or exhaust, making them flexible for various case layouts.
Who should skip it
Skip this option if you need PWM speed control, as the data only lists a 6-pin interface for power and lighting. It lacks explicit RPM or airflow CFM ratings, so you cannot verify performance numbers. If you prefer ARGB sync over standard RGB, this may not fit your motherboard. The hydraulic bearing is not sleeve or fluid dynamic, which some users prefer. Check your case compatibility for 120mm mounts before buying.
Verdict: This is a practical choice for quiet, high-airflow cooling with standard RGB lighting. It fits well in setups that do not require PWM control or advanced sync features.
upHere 120mm RGB Key Specs
Fan Size: 120mm
This dimension refers to the width and height of the fan frame. A 120mm size is the standard for most PC cases, ensuring compatibility with typical mounting holes. You can easily swap this fan for others in your chassis. It balances airflow volume and static pressure well for general case ventilation.
Bearing Type: Hydraulic
Hydraulic bearings use fluid to reduce friction between moving parts. This design helps lower operating noise compared to sleeve bearings. It also tends to last longer under continuous use. If you prioritize a quiet PC build, this bearing type is a practical choice for sustained cooling performance.
Lighting Type: RGB
RGB lighting allows the fan to display a wide spectrum of colors. This feature is primarily aesthetic, letting you match your case interior theme. It requires a compatible motherboard header or controller to change colors. If visual customization is important to your build, this spec adds visual flair.
Interface: 6Pin
The 6-pin interface provides power for the RGB lighting system. This specific connector ensures safe and reliable power delivery to the LEDs. It separates lighting control from fan speed control, which is common in budget designs. You need a compatible header to activate the light effects.
Design and build details
According to the listing, the fan frame measures 4.72 inches by 4.72 inches with a thickness of 0.98 inches. This standard 120mm footprint ensures it fits most common PC case mounting locations. The unit weighs just 0.32 ounces, making it lightweight for standard chassis setups. The hydraulic bearing type is noted for reducing operational noise and improving efficiency. You can expect quieter performance compared to fans without this bearing style.
The lighting system uses a 6-pin interface for RGB power. This connection provides safe and reliable output, resulting in bright and colorful LED effects. The design supports two-way installation. You can orient the fan to blow warm air out of the case or draw cool air into your system. This flexibility allows you to customize airflow direction based on your cooling needs.
Rubber pads are included to further reduce operating noise. These pads help dampen vibrations during operation. The quiet edition focus suggests a priority on low decibel levels. The hydraulic bearing and rubber pads work together to minimize sound. This build approach suits users who prioritize a silent PC environment. The simple mechanical design relies on these standard components for durability. You do not need complex tools for installation due to the straightforward frame design.
Setup and everyday use
Setting up these fans involves connecting the 6-pin interface to your motherboard or a compatible RGB controller. The listing notes this interface provides safe and reliable power output. This connection ensures the RGB lighting remains bright and colorful during operation. You do not need complex wiring for basic installation. The fan supports two-way airflow direction. You can mount it to blow warm air out of the case or draw cool air into the system. This flexibility allows you to configure your case airflow based on your specific cooling needs. In daily use, the hydraulic bearing type helps reduce operating noise. Rubber pads are included to further dampen vibration and improve efficiency. This combination supports a quiet environment while maintaining high airflow for large volume cooling. The 120mm size is standard, so it fits most common PC cases without modification. The lightweight design at 0.32 ounces makes handling and mounting straightforward. You can easily swap this fan for others in your build if needed. The quiet edition focus suggests it is suitable for users who prioritize low noise levels. The RGB lighting adds visual customization to your build. You can sync these lights with other compatible components for a unified look. The straightforward 6-pin connection keeps the setup process simple. You get five fans in the pack, allowing for comprehensive case coverage. This makes it easy to create consistent airflow across multiple intake or exhaust positions. The design supports efficient cooling without adding significant weight or complexity to your build.
Before you buy these fans
You need to verify your motherboard has an available 6-pin RGB header. If your board lacks this specific connector, you will require a separate RGB controller or hub to manage the lighting effects. The listing highlights a hydraulic bearing type, which typically offers a balance of silence and durability. You should check your case’s airflow direction needs. These fans support two-way installation, allowing you to push warm air out or pull cool air in. Ensure your case has the standard 120mm mounting holes. Since this is a 5-pack, consider your total fan count. Adding multiple fans increases airflow but also adds weight to the case frame. Keep the rubber pads clean to maintain the quiet operation the listing promises. This option suits users who want high airflow without complex setup. It fits well alongside other 120mm options if you prioritize volume cooling over extreme static pressure.
Check before you buy
- Check for an available 6-pin RGB header on your motherboard
- Verify your PC case has standard 120mm mounting holes
- Ensure you have space for a 0.98-inch thick fan
- Confirm your airflow needs match the two-way installation design
The product at a glance
upHere 120mm RGB Case Fan 5-Pack
Best for: Quiet high-airflow builds with 6-pin RGB support
- Fan Size
- 120mm
- Bearing Type
- Hydraulic
- Lighting Type
- RGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
- Weight
- 0.32 ounces
View on Amazon: upHere 120mm RGB Case Fan 5-Pack Affiliate link
The upHere 120mm RGB fan is a quiet edition designed for high airflow and volume cooling. It uses a hydraulic bearing and rubber pads to reduce operating noise. The 6-pin interface provides safe RGB power for bright lighting. You can install it to blow warm air out or draw cool air in. This 5-pack suits builders who want reliable airflow with visible LED effects in their PC case.
Pros
- 120mm size tuned for high airflow
- Hydraulic bearing reduces operating noise
- 6-pin interface for safe RGB power
- Two-way installation for intake or exhaust
Cons
- Requires 6-pin connection, not standard 4-pin PWM
- No software control mentioned for RGB customization
- Fixed lighting without speed adjustment specs
Good fit if
- You want high airflow with visible RGB lighting
- You prefer quiet operation from hydraulic bearings
- You need flexible intake or exhaust mounting
Skip if
- You require PWM speed control via motherboard
- You want software-based RGB color customization
- You need standard 4-pin fan headers
Verdict: upHere 120mm RGB Hydraulic Fan fits users who prioritize airflow and quiet operation with basic RGB lighting. It is ideal for builds that use 6-pin RGB headers and do not require advanced fan speed or lighting control.
Specifications side by side
| Spec | upHere 120mm RGB Case Fan 5-Pack |
|---|---|
| Fan Size | 120mm |
| Bearing Type | Hydraulic |
| Lighting Type | RGB |
| Lighting | RGB |
| Dimensions | 4.72 × 0.98 × 4.72 inches |
| Weight | 0.32 ounces |
| Model | ZC RGB12305-01 US |
Frequently asked questions
Is the upHere 120mm RGB fan suitable for quiet builds?
Yes, this fan is designed for quiet high-airflow builds. It uses hydraulic bearings to reduce mechanical noise during operation. The listing highlights it as a quiet edition, making it ideal for users who prioritize low sound levels while maintaining effective cooling performance for their PC components.
What type of RGB connector does this fan use?
This fan uses a 6-pin RGB interface. You must connect this specific connector to your motherboard or a compatible RGB controller. The listing notes that this interface provides safe and reliable power output for the lighting effects, ensuring the RGB colors remain bright during use.
Does this fan support advanced lighting control?
No, it does not support advanced control features. The product is best for builds that use basic 6-pin RGB headers. It lacks support for complex fan speed or lighting synchronization protocols, so you should skip it if you need detailed customization or integration with smart lighting ecosystems.
What are the physical dimensions of this fan?
The fan frame measures 4.72 inches by 4.72 inches with a thickness of 0.98 inches. This standard 120mm footprint ensures compatibility with most common PC case mounting locations. The unit weighs just 0.32 ounces, making it lightweight and easy to install in standard chassis without adding significant mass.
How many fans are included in this package?
This package contains a five-pack of fans. You get five individual 120mm RGB case fans in this single purchase. This quantity allows you to cover multiple intake or exhaust positions in your case without buying separate units, providing a consistent airflow and lighting setup across your build.
Who should buy this upHere 120mm RGB fan?
You should buy this fan if you prioritize airflow and quiet operation with basic RGB lighting. It fits users who have 6-pin RGB headers and do not require advanced control. It is ideal for standard builds where simple, reliable lighting and cooling performance are more important than smart features.
Who should skip this upHere 120mm RGB fan?
You should skip this fan if your motherboard lacks a 6-pin RGB header. You will need a separate controller if your board does not have this specific connector. Additionally, avoid it if you require advanced fan speed or lighting control, as this model only supports basic RGB functionality.