Best upHere Case Fans: 5 Models Compared

Quick picks

Our 5 picks

1 Best overall

upHere 120mm RGB Case Fan 3-Pack

Best for: Basic RGB cooling with quiet operation

Fan Size

120mm

Bearing Type

Hydraulic

Lighting Type

RGB

Dimensions

4.72 × 0.98 × 4.72 inches

View on Amazon: upHere 120mm RGB Case Fan 3-Pack Affiliate link

This 120mm fan set delivers high airflow with hydraulic bearings for quiet operation. The RGB lighting uses a 6-pin interface for reliable power. You get a three-pack of black fans for flexible case building. The design supports two-way installation, letting you push warm air out or pull cool air in. It suits users who want basic RGB effects without complex software.

Pros

• Hydraulic bearing reduces operating noise
• High airflow tuned for large volume cooling
• 6-pin RGB interface for safe power
• Supports two-way installation directions

Cons

• Requires 6-pin RGB connection, not standard motherboard headers
• Fixed RGB color, no addressable ARGB control
• No software for lighting customization

Good fit if

• You need a simple, quiet cooling solution
• You want to install fans in either direction
• You prefer fixed RGB lighting without software

Skip if

• You need addressable ARGB for custom patterns
• You want motherboard-synced lighting control
• You prefer fans with software management

Verdict: upHere 120mm RGB Case Fan 3-Pack offers reliable airflow and quiet hydraulic bearings for basic cooling needs. It fits users who want simple RGB lighting without complex setup.

2 Also great

upHere 120mm White Hydraulic Bearing ARGB Fan

Best for: Users wanting remote speed control and ARGB sync

Fan Size

120mm

Max Fan Speed

1800RPM

Connector Type

4-Pin PWM

Bearing Type

Hydraulic

Lighting Type

5V 3PIN ARGB

Dimensions

4.72 × 0.98 × 4.72 inches

View on Amazon: upHere 120mm White Hydraulic Bearing ARGB Fan Affiliate link

This upHere 120mm white case fan uses a hydraulic bearing for stable rotation and a lifespan of up to 40,000 hours. It reaches 1800RPM via a 4-pin PWM connection for motherboard speed control. The 5V ARGB lighting syncs with compatible boards. A included hub and remote let you adjust LED effects and fan speed independently. It suits builders wanting high airflow and customizable lighting without complex wiring.

Pros

• Hydraulic bearing rated for 40,000 hours
• Max speed of 1800RPM for high airflow
• 5V 3-pin ARGB syncs with motherboards
• Includes remote for speed and light control

Cons

• Remote controls fan speed, not motherboard PWM
• Requires specific 5V ARGB header, not 12V
• Hub limits total ports to nine fans

Good fit if

• You want a white case fan with ARGB lighting
• You need a remote to adjust fan speed
• Your motherboard supports 5V ARGB synchronization

Skip if

• You only have 12V RGB headers available
• You prefer fans controlled entirely by software
• You need more than nine fan ports

Verdict: upHere 120mm White ARGB Fan with Hub delivers strong cooling and lighting flexibility through its included hub and remote. It fits users who want manual speed control via remote and have compatible 5V ARGB headers.

3 Also great

upHere 120mm RGB Case Fan 5-Pack

Best for: budget builders needing quiet airflow

Fan Size

120mm

Bearing Type

Hydraulic

Lighting Type

RGB

Dimensions

4.72 × 0.98 × 4.72 inches

Weight

0.32 ounces

View on Amazon: upHere 120mm RGB Case Fan 5-Pack Affiliate link

This 120mm fan prioritizes airflow and low noise. It uses a hydraulic bearing and rubber pads to reduce operating sound. The RGB lighting connects via a 6-pin interface for safe power. You can install it to blow air out or draw cool air in. This 5-pack suits you if you need basic, quiet cooling with visible LED effects.

Pros

• Hydraulic bearing for reduced noise
• Rubber pads for vibration dampening
• 6-pin RGB interface for bright lighting
• Bidirectional airflow installation

Cons

• Lacks PWM speed control
• No motherboard sync capability
• Fixed RGB color via 6-pin

Good fit if

• You want quiet, high-airflow cooling
• You need a 5-pack for a full build
• You prefer simple RGB lighting

Skip if

• You require PWM fan control
• You want motherboard RGB sync
• You need addressable ARGB effects

Verdict: upHere 120mm RGB Quiet Fan 5-Pack is a practical choice for builders who prioritize low noise and high airflow over smart lighting features.

4 Best budget

upHere 9-Port Magnetic ARGB Hub

Best for: Simplifying multi-fan and ARGB cable management

Lighting

ARGB

View on Amazon: upHere 9-Port Magnetic ARGB Hub Affiliate link

This hub manages nine PWM fans and five-volt ARGB devices in one compact unit. It uses a SATA power connection for stable output at full load. Magnetic mounting allows flexible placement on iron surfaces. The front panel syncs with fans via remote. You get a complete kit with cables for plug-and-play setup. It suits builders who want tidy cable management and synchronized lighting without complex wiring.

Pros

• Controls up to nine PWM fans and five ARGB devices
• Magnetic mounting for flexible placement on iron surfaces
• SATA-powered design ensures stable performance at full load
• Includes remote control for color and effect customization

Cons

• Requires SATA power connection from the motherboard
• Limited to five-volt ARGB devices only
• No mobile app control mentioned in specifications

Good fit if

• You need to manage multiple fans and ARGB strips
• You prefer magnetic mounting for easy installation
• You want a single hub for cable management

Skip if

• You only have standard 12-volt RGB fans
• You need more than nine fan connections
• You require mobile app control for lighting

Verdict: The upHere Magnetic ARGB Fan Hub simplifies cable management for builds with multiple fans and five-volt ARGB devices. It is a practical solution for users who value magnetic mounting and remote control over app-based management.

5 Best premium

upHere UA02 120mm ARGB Fan

Best for: clean cable runs and infinity-mirror lighting

Fan Size

120mm

Max Fan Speed

1800 RPM

Max Airflow

53 CFM

Bearing Type

Hydraulic

Lighting Type

ARGB

Blade Direction

Forward

View on Amazon: upHere UA02 120mm ARGB Fan Affiliate link

This three-pack gives you 120mm case fans with infinity-mirror ARGB lighting and an interlocking daisy-chain connection. Each fan runs from 800 to 1800 RPM on hydraulic bearings, moving up to 53 CFM of air. It suits you if you want synchronized motherboard lighting and minimal cable clutter across your mounts without visible mounting screws.

Pros

• Modular slide-in daisy chaining reduces fan wiring
• Variable speed range from 800 to 1800 RPM
• Stealth foot pads conceal mounting screw holes
• Multi-layer infinity mirror ARGB lighting

Cons

• Maximum airflow tops out at 53 CFM
• Reverse airflow requires buying a separate variation

Good fit if

• You want modular daisy-chained fans to reduce case cable clutter.
• You prefer multi-layer infinity mirror lighting controlled by your motherboard.

Skip if

• You need fan airflow exceeding 53 CFM for high-heat components.
• You want reverse-pitch intake blades straight out of this box.

Verdict: upHere 120mm Infinity Mirror ARGB Fans fit builders prioritizing clean cable management and layered lighting accents over maximum airflow volume.

Specifications side by side

upHere Case Fan Lineup Overview

The upHere lineup splits into distinct groups based on lighting and connectivity. The upHere 120mm RGB Case Fan 3-Pack and the upHere 120mm RGB Case Fan 5-Pack offer standard RGB options for basic cooling needs. These models suit users who prioritize quiet hydraulic bearings and simple airflow without complex setup requirements. They are practical choices for budget builders or those seeking reliable performance.

For those wanting more control, the upHere 120mm White Hydraulic Bearing ARGB Fan provides remote speed adjustment and ARGB sync. It fits users with compatible 5V ARGB headers who value manual speed control. The upHere UA02 120mm ARGB Fan complements this with clean aesthetics for front intake setups. Finally, the upHere 9-Port Magnetic ARGB Hub simplifies cable management for multi-fan builds. It serves as a practical solution for users who prefer magnetic mounting and remote control over app-based management.

Who upHere Fans Suit

The upHere range focuses on standard 120mm cooling with a few specific variations. You can choose between basic RGB or addressable RGB lighting, depending on your motherboard compatibility. The lineup includes 3-packs, 5-packs, and single fans, plus a magnetic hub for cable management. All listed fans share the same 0.98-inch thickness, fitting standard case mounts. However, the brand currently offers no 140mm or 92mm options. If you need non-standard sizes, this range does not cover those gaps. The selection suits builders prioritizing quiet hydraulic bearings and simple remote or header-based control.

How to choose the right one

1. Check motherboard lighting headers

   You must verify your motherboard has the correct header before buying. ARGB fans, like the upHere 120mm White Hydraulic Bearing model, require a 5V three-pin header. Standard RGB fans, such as the upHere 120mm RGB Case Fan 3-Pack, often use a 12V four-pin header. Using the wrong connector can damage the LEDs. Check your motherboard manual to identify which type you have. If you lack a free header, consider a hub like the upHere 9-Port Magnetic ARGB Hub to manage connections safely.

2. Match fan size to case

   Most upHere fans are 120mm models, including the UA02 and the RGB packs. You need to confirm your case supports 120mm fans in the desired slots. Some cases only fit 140mm fans in certain positions. Measure the available space inside your chassis. A 120mm fan fits in a 120mm slot. It will not fit in a 140mm slot without an adapter. Check your case specifications for supported fan sizes. This ensures the fans you buy will physically install without modification or gaps.

3. Decide on airflow direction

   Airflow direction matters for cooling efficiency. The upHere UA02 120mm ARGB Fan is designed for forward airflow, making it ideal for front intake positions. This pushes cool air into the case. Other models may have different airflow directions. Check the product specifications for intake or exhaust orientation. Placing a fan incorrectly can reduce cooling performance. For front panels, choose forward airflow. For rear or top panels, exhaust airflow is often preferred. This helps manage heat inside your PC case effectively.

4. Consider remote control needs

   Some users prefer manual control over software. The upHere 120mm White Hydraulic Bearing ARGB Fan includes a remote for speed and lighting adjustments. This is useful if your motherboard lacks software support or you want quick changes. Other models, like the basic RGB packs, rely on motherboard control or hubs. Decide if you want physical remotes or digital control. Remotes offer simplicity. Software offers more customization. Choose based on your preference for managing fan speeds and lighting patterns without opening your PC case.

5. Evaluate hub requirements

   Managing multiple fans can clutter your case. The upHere 9-Port Magnetic ARGB Hub simplifies cable management for builds with several ARGB fans. It allows you to connect multiple devices to a single header. This is helpful if you have limited motherboard ports. You do not need a hub for small builds with just two or three fans. Evaluate your fan count. If you plan to use five or more ARGB fans, a hub reduces cable clutter. It also centralizes power and data connections for easier setup and maintenance.

Frequently asked questions

See also

• uphere 120mm RGB case fan vs ua02 fan 120mm case
• uphere 120mm white computer case vs 120mm RGB series case
• uphere universal 120mm CPU fan review
• best uthfy fans