Looking Beyond the Thermalright ARGB Fan HUB X12? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Thermalright ARGB and Fan HUB X12 IR White manages twelve fans and ARGB lighting through a single SATA connection. It helps you keep cables neat and syncs lighting effects via a 5V 3-pin header. However, you might look for thermalright argb fan hub x12 alternatives if your build requires different dimensions or specific fan sizes. Some builders need slim fans for low-profile coolers, while others prefer pre-packaged fan arrays instead of a bare hub. The alternatives listed here were chosen because their specifications overlap with the original product’s core functions. They also support ARGB synchronization and offer solutions for limited motherboard headers. This guide compares seven options that address common needs such as vibration reduction, specific color themes, or compact form factors. Each entry focuses on published specs like fan size, connector type, and physical dimensions. You can decide which hub or fan pack fits your case layout and lighting requirements. The following selections provide practical variations for builders who want centralized control without relying solely on the Thermalright unit. These options cover different use cases while maintaining compatibility with standard 5V ARGB motherboards.
Comparing Alternatives to the Hub
EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
The EZDIY-FAB Moonlight 120mm ARGB Fans replace the hub with a complete six-pack solution. You get physical 120mm fans rather than just a controller. This product includes a slim X-5P hub for manual ARGB control. It reduces vibration through its design. You lose the ability to manage fan speeds centrally if you prefer the Thermalright model. This option suits builders who want hardware simplicity and consistent synchronization across a full array. It is a better choice when you need both airflow and lighting in one package. You do not need separate fan purchases. The setup focuses on manual lighting adjustment rather than automatic motherboard sync.
Cooler Master MF120 Halo 120mm ARGB Fan
The Toptekits MF120 Halo Duo-Ring ARGB Fan offers a different approach by providing a single fan with integrated lighting. It uses a 4-pin connector for speed control and 5V ARGB for lighting. You get targeted airflow and distinct lighting effects for 120mm bays. This product fits users who already have the necessary motherboard headers. You give up the central management of twelve fans. This alternative is ideal for silent, efficient cooling in standard builds. It does not require a separate hub for basic operation. The design prioritizes visual customization alongside reliable performance. You should pick this if you need individual fan control rather than a centralized hub.
Cooler Master MF120 Halo Dual-Ring ARGB Fan
The Cooler Master MF120 Halo Dual-Ring ARGB Fan provides vibrant lighting effects for 120mm bays. It features a dual-ring design for enhanced visual appeal. You get solid airflow and reliable performance. This product suits builders who prioritize visual customization over ultra-quiet operation. You lose the central hub functionality of the Thermalright X12. This alternative is better when you need specific lighting patterns for individual fans. It does not manage multiple fans from one point. The weight is slightly lower than the hub. You should choose this for builds where aesthetics are the primary concern. It requires existing motherboard headers for operation.
Vetroo 120mm Pink ARGB Fans 3-Pack
The Vetroo 120mm Pink ARGB Fans offer a specific color theme for your build. This three-pack provides hydraulic performance and long bearing life. You get reliable motherboard-synced lighting without a separate hub. This option suits builders seeking a pink-themed aesthetic. You give up the ability to manage fan speeds centrally. The product fits those who prioritize lighting synchronization over universal controller support. It is ideal for standard 120mm cases with 5V ARGB headers. You do not need additional cables for lighting control. The design focuses on visual consistency across the three fans. This is a good choice for themed builds requiring specific colors.
Ocypus Gamma F12 120mm ARGB Fan
The Ocypus Gamma F12 120mm ARGB Fan delivers distinctive dual-zone infinity mirror lighting. You get reliable airflow with quiet performance for standard 120mm bays. This product prioritizes aesthetics alongside cooling efficiency. You lose the central hub functionality of the Thermalright model. This alternative is better when you need specific lighting effects for individual fans. It does not manage multiple fans from one point. The design suits builders who value visual customization. You should pick this for builds where lighting patterns are important. It requires existing motherboard headers for operation. The weight is comparable to other 120mm fans. This option is ideal for those seeking premium lighting effects.
ID-COOLING 120mm Slim ARGB Fan
The ID-COOLING 120mm Slim ARGB Fan is designed for low-profile CPU coolers and ITX builds. You get airflow in tight spaces where standard fans do not fit. This product is ideal for compact cases. You lose the central hub functionality of the Thermalright X12. This alternative is better when you need specific fan dimensions. It does not manage multiple fans from one point. The slim design allows for installation in restricted areas. You should pick this for ITX builds requiring compact cooling. It requires existing motherboard headers for operation. The weight is lighter than the hub. This option is suitable for builders with space constraints.
Quick picks
Our 7 picks
Thermalright ARGB and Fan HUB X12 IR White
Best for: Centralized fan and ARGB control
- Lighting
- ARGB
- Dimensions
- 4.25 × 1.97 × 0.83 inches
View on Amazon: Thermalright ARGB and Fan HUB X12 IR White Affiliate link
This hub consolidates connections for up to 12 PC fans and their ARGB lighting into a single SATA power draw. It supports 5V 3-pin ARGB synchronization and PWM fan speed control via motherboard headers. The unit measures 108x50x21mm and includes a 500mm cable. It suits builders with limited motherboard headers who need centralized control for fans and addressable RGB lighting.
Pros
- Connects 12 fans and ARGB devices to one SATA power source
- Supports 5V 3-pin ARGB lighting synchronization
- Manages PWM fan speed control through motherboard headers
- Compact 108x50x21mm plastic housing
Cons
- Only recognizes fan speed for the single fan in the red interface
- Does not support 12V 4-pin RGB devices
- SATA cable is not included
Good fit if
- You need to connect more fans than your motherboard headers allow
- You use 5V ARGB fans and want synchronized lighting
- You want to reduce cable clutter with a single SATA power connection
Skip if
- You require 12V 4-pin RGB support
- You need speed monitoring for all connected fans simultaneously
- You prefer a hub that includes the SATA power cable
Verdict: Thermalright ARGB and Fan HUB X12 IR White is a practical solution for managing 12 fans and ARGB lighting with limited motherboard headers, provided you only need speed monitoring for one fan.
EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
Best for: Manual ARGB control and vibration reduction
- Fan Size
- 120 mm
- Max Airflow
- 26.16 CFM
- Bearing Type
- Self-lubricated
- Lighting Type
- ARGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
View on Amazon: EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack) Affiliate link
This 120mm ARGB fan pack delivers 26.16 CFM of airflow with self-lubricated bearings for efficiency. The design features tri-aperture lighting that syncs with 5V 3-pin motherboard headers like Asus Aura. You get a dedicated hub and 21-key remote for manual speed and color control. It includes eight anti-vibration pads to reduce noise. This set is ideal for builders wanting synchronized lighting and manual hardware control without software complexity.
Pros
- 26.16 CFM max airflow per fan
- Syncs with 5V 3-pin ARGB motherboard headers
- Includes hub and 21-key remote for manual control
- Eight anti-vibration rubber pads reduce noise
- Self-lubricated bearings for lower friction
Cons
- Requires a 5A power supply for the hub
- Hub supports only six fans maximum
- No wireless or app-based control available
Good fit if
- You want manual control via a physical remote
- You need six fans for a full case build
- You use a 5V 3-pin ARGB motherboard header
Skip if
- You prefer software-based RGB synchronization
- You need more than six fans in one chain
- You require a 12V 4-pin RGB connection
Verdict: EZDIY-FAB Moonlight 120mm ARGB Fan 6-Pack offers reliable airflow and manual lighting control for builders who prioritize hardware simplicity and consistent synchronization across a full fan array.
Cooler Master MF120 Halo 120mm ARGB Fan
Best for: 120mm cases with 5V ARGB headers
- Fan Size
- 120mm
- Max Fan Speed
- 1,800 rpm
- Lighting Type
- 5V 3-Pin ARGB
- Connector Type
- 4-Pin
- Dimensions
- 0.98 × 4.72 × 4.72 inches
- Weight
- 7.05 ounces
View on Amazon: Cooler Master MF120 Halo 120mm ARGB Fan Affiliate link
This 120mm fan uses a hybrid static pressure blade design to manage airflow through radiators or mesh grilles. It reaches 1,800 rpm via PWM control for dynamic speed adjustment. The 24 individually controlled ARGB LEDs create visual effects. You need a 5V 3-pin ARGB motherboard or controller. It does not work with standard 4-pin RGB headers. This fan suits builders who want quiet cooling with customizable lighting.
Pros
- 120mm hybrid static pressure blade design
- 24 individually controlled ARGB LEDs
- PWM speed range of 650 to 1,800 rpm
- Sound absorbing materials for quieter operation
Cons
- Requires separate 5V 3-pin ARGB controller or motherboard header
- Incompatible with standard 4-pin RGB or 12V headers
- May need a separate adapter cable for some Gigabyte motherboards
Good fit if
- You have a motherboard with a 5V 3-pin ARGB header
- You need fans for a CPU liquid radiator
- You want customizable lighting effects without extra hubs
Skip if
- You only have 4-pin RGB headers available
- You prefer fans with built-in lighting controllers
- You need compatibility with 12V standard RGB systems
Verdict: Toptekits MF120 Halo Duo-Ring ARGB Fan delivers targeted airflow and distinct lighting for 120mm builds. It fits users who already have the necessary 5V ARGB headers and want silent, efficient cooling.
Cooler Master MF120 Halo Dual-Ring ARGB Fan
Best for: 120 mm bays needing vibrant ARGB effects
- Fan Size
- 120 mm
- Max Airflow
- 47.2 CFM ± 10%
- Static Pressure
- 1.6 mmH2O ± 10%
- Noise Level
- 30 dBA
- Lighting Type
- Addressable RGB
- Dimensions
- 4.72 × 4.72 × 0.98 inches
View on Amazon: Cooler Master MF120 Halo Dual-Ring ARGB Fan Affiliate link
The Cooler Master MF120 Halo is a 120 mm case fan with dual-ring addressable RGB lighting. It delivers 47.2 CFM airflow and 1.6 mmH2O static pressure. Noise levels reach 30 dBA at maximum speed. It includes smart sensors to prevent jamming. This fan suits users who want strong air movement and vibrant, individually controlled lighting for their build.
Pros
- Dual-ring addressable RGB with 24 LEDs
- 47.2 CFM maximum airflow
- Smart fan sensor for jam protection
- Compatible with major ARGB motherboard software
Cons
- 30 dBA noise level is higher than quieter alternatives
- 120 mm size may not fit larger 200 mm slots
- Sold as single fan in this variation
Good fit if
- You want individually controllable dual-ring ARGB lighting
- You need strong airflow for case intakes or exhausts
- You use motherboards with ARGB headers
Skip if
- You require silent operation below 25 dBA
- You are building with 200 mm fan mounts
- You prefer non-addressable single-color lighting
Verdict: Cooler Master MF120 Halo ARGB Fan offers vibrant dual-ring lighting and solid airflow for 120 mm bays. It fits builders prioritizing visual customization and reliable performance over ultra-quiet operation.
Vetroo 120mm Pink ARGB Fans 3-Pack
Best for: Pink-themed builds with 5V ARGB motherboards
- Fan Size
- 120mm
- Connector Type
- PWM
- Bearing Type
- Hydraulic
- Lighting Type
- 5V 3-Pin ARGB
- Dimensions
- 2.8 × 5.7 × 10.5 inches
- Weight
- 5.29 ounces
View on Amazon: Vetroo 120mm Pink ARGB Fans 3-Pack Affiliate link
These Vetroo fans bring a distinct pink aesthetic to your build. They feature 120mm hydraulic bearings for a 50,000-hour lifespan. The 5V 3-pin ARGB syncs with motherboards, while PWM support adjusts speed based on temperature. Nine blades ensure strong airflow. The package includes three fans and vibration pads for quieter operation.
Pros
- 5V 3-pin ARGB syncs with motherboard lighting
- PWM support adjusts speed to temperature
- Hydraulic bearings rated for 50,000 hours
- Nine blades provide high volume airflow
- Includes vibration rubber pads for silence
Cons
- Only supports 5V 3-pin ARGB, not 12V
- Limited to 120mm size
- No included controller for standalone sync
Good fit if
- You want pink accents in your PC build
- You need reliable 120mm fans with ARGB
- You prefer hydraulic bearing longevity
Skip if
- You require 12V ARGB compatibility
- You need 140mm or larger fans
- You want standalone lighting control without a motherboard
Verdict: Vetroo 120mm ARGB Pink Case Fans suit builders seeking a specific color theme with reliable hydraulic performance. They fit those who prioritize motherboard-synced lighting and long bearing life over universal controller support.
Ocypus Gamma F12 120mm ARGB Fan
Best for: 120mm cases needing infinity mirror lighting
- Fan Size
- 120mm
- Max Fan Speed
- 1600RPM
- Connector Type
- 4-Pin PWM
- Bearing Type
- Hydraulic Bearing
- Lighting Type
- ARGB
- Blade Direction
- Forward
View on Amazon: Ocypus Gamma F12 120mm ARGB Fan Affiliate link
The Ocypus Gamma F12 is a 120mm case fan featuring a dual-zone infinity mirror design with 24 ARGB LEDs. It uses a 4-pin PWM connector for speed control and supports daisy-chaining up to three fans. The forward-blade design optimizes airflow while rubber pads reduce vibration. This fan suits users seeking synchronized lighting and quiet operation for standard 120mm mounting spaces.
Pros
- Dual-zone infinity mirror lighting with 24 ARGB LEDs
- 4-pin PWM connector for adjustable speed control
- Supports daisy-chaining for up to three fans
- Rubber damping pads reduce vibration and resonance
Cons
- Limited to forward blade direction in this variant
- Maximum daisy-chain count is only three fans
- Requires separate ARGB header for lighting control
Good fit if
- You want synchronized infinity mirror lighting effects
- You need quiet operation for daily office use
- You have standard 120mm case mounting slots
Skip if
- You require reverse blade airflow direction
- You need to daisy-chain more than three fans
- You prefer fans without complex lighting setups
Verdict: The Ocypus Gamma F12 120mm ARGB Fan delivers reliable airflow with distinctive dual-zone lighting for builders who prioritize aesthetics and quiet performance in standard 120mm bays.
ID-COOLING 120mm Slim ARGB Fan
Best for: low-profile CPU coolers and ITX builds
- Fan Size
- 120mm
- Max Fan Speed
- 2, 000 rpm
- Max Airflow
- 54.6CFM
- Noise Level
- 13.8~31.2dB(A)
- Connector Type
- PWM
- Lighting Type
- 5V 3PIN ARGB
View on Amazon: ID-COOLING 120mm Slim ARGB Fan Affiliate link
This is a 120mm case fan with a slim 15mm profile. It uses PWM for speed control between 500 and 2,000 rpm. The fan delivers up to 54.6 CFM of airflow. It features 5V 3-pin ARGB lighting for motherboard sync. You should use this fan in low-profile CPU coolers, HTPCs, or ITX builds where space is tight.
Pros
- Slim 15mm thickness saves space in compact builds
- PWM control adjusts speed from 500 to 2,000 rpm
- 5V 3-pin ARGB syncs with motherboard lighting
- Max airflow reaches 54.6 CFM
Cons
- Slim 15mm height limits use in standard 25mm fan slots
- Noise level reaches 31.2 dB(A) at maximum speed
- Requires 5V 3-pin ARGB header for lighting control
Good fit if
- You need a fan for a low-profile CPU cooler
- You are building a compact ITX or HTPC case
- You have limited depth for fan installation
Skip if
- You require a standard 25mm thick fan for maximum airflow
- Your motherboard only supports 12V 4-pin RGB
- You need silent operation below 13.8 dB(A)
Verdict: ID-COOLING 120mm Slim ARGB Fan fits builders who need airflow in tight spaces. It works well for ITX cases or low-profile coolers where standard fans do not fit.
Specifications side by side
| Spec | Thermalright ARGB and Fan HUB X12 IR White | EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack) | Cooler Master MF120 Halo 120mm ARGB Fan | Cooler Master MF120 Halo Dual-Ring ARGB Fan | Vetroo 120mm Pink ARGB Fans 3-Pack | Ocypus Gamma F12 120mm ARGB Fan | ID-COOLING 120mm Slim ARGB Fan |
|---|---|---|---|---|---|---|---|
| Fan Size | not stated | 120 mm | 120mm | 120 mm | 120mm | 120mm | 120mm |
| Max Fan Speed | not stated | not stated | 1,800 rpm | not stated | not stated | 1600RPM | 2, 000 rpm |
| Max Airflow | not stated | 26.16 CFM | not stated | 47.2 CFM ± 10% | not stated | not stated | 54.6CFM |
| Static Pressure | not stated | not stated | not stated | 1.6 mmH2O ± 10% | not stated | not stated | not stated |
| Noise Level | not stated | not stated | not stated | 30 dBA | not stated | not stated | 13.8~31.2dB(A) |
| Connector Type | not stated | not stated | not stated | not stated | PWM | 4-Pin PWM | PWM |
| Bearing Type | not stated | Self-lubricated | not stated | not stated | Hydraulic | Hydraulic Bearing | not stated |
| Lighting Type | not stated | ARGB | 5V 3-Pin ARGB | Addressable RGB | 5V 3-Pin ARGB | ARGB | 5V 3PIN ARGB |
| Blade Direction | not stated | not stated | not stated | not stated | not stated | Forward | not stated |
| Lighting | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Dimensions | 4.25 × 1.97 × 0.83 inches | 4.72 × 0.98 × 4.72 inches | 0.98 × 4.72 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 2.8 × 5.7 × 10.5 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.63 inches |
| Weight | not stated | not stated | 7.05 ounces | 6.35 ounces | 5.29 ounces | 6.7 ounces | 3.53 ounces |
| Color | White | not stated | MF120 HALO | ARGB | Pink | Black ARGB | black |
| Model | ARGB and Fan HUB X12 IR WHITE | US-rgb slim fan with hub X-5P | MFL-B2DN-18NPA-R1 | MFL-B2DN-18NPA-R1 | SA-120 | Gamma F12 Elite BK ARGB | NO-12015-XT-ARGB |
| Size | not stated | 6 Pack | 120mm MF120 | 120 | 120mm-HDB | Gamma F12 Infinity Mirror - Forward Blade - 1 Pack | not stated |
If you need liquid cooling, review thermalright mjolnir vision 360 argb alternatives for compatible radiator and pump dimensions.
Frequently asked questions
Does the Thermalright ARGB Fan HUB X12 support PWM fan speed control?
The hub manages fan speed monitoring for only one fan. You must connect other fans directly to your motherboard or a separate controller for individual speed control. It focuses on centralizing ARGB lighting and power for up to twelve fans via SATA.
What is the size of the Thermalright ARGB Fan HUB X12 IR White?
This hub measures 4.25 inches in length, 1.97 inches in width, and 0.83 inches in height. Its compact white chassis allows for discreet mounting inside your case. It is designed to fit in tight spaces while managing twelve fans and ARGB effects.
How do EZDIY-FAB Moonlight fans handle ARGB synchronization?
These fans use manual ARGB control through an included slim X-5P hub. You get reliable synchronization across the full six-pack array without needing complex software. The setup prioritizes hardware simplicity and consistent lighting effects for your build.
Are the Cooler Master MF120 Halo fans compatible with 5V ARGB headers?
Yes, these 120mm fans are designed for motherboards with 5V ARGB headers. They deliver targeted airflow and distinct dual-ring lighting. The 4-pin connector ensures proper fan speed control while the ARGB feature allows for visual customization in your case.
What makes the Vetroo Pink ARGB fans unique for themed builds?
These 120mm fans feature a specific pink color theme for aesthetic builds. They use hydraulic bearings for long life and rely on motherboard-synced lighting. You get reliable cooling performance with a distinct look that suits pink-themed PC cases.
Does the Ocypus Gamma F12 fan include an infinity mirror effect?
Yes, this 120mm fan offers distinctive dual-zone infinity mirror lighting. It provides reliable airflow and quiet performance for standard 120mm bays. The black ARGB design adds visual depth to your case while maintaining solid cooling capabilities for your components.
Can the ID-COOLING 120mm Slim ARGB Fan fit in tight spaces?
This fan is specifically designed for low-profile CPU coolers and ITX builds. It measures only 0.63 inches in height, allowing it to fit where standard fans do not. You get necessary airflow and ARGB lighting in compact chassis environments.