Phanteks Enthoo Pro Non-Window Full or Phanteks Enthoo Pro Full Tower? Which Phanteks Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking at the phanteks enthoo pro non window full vs enthoo pro full tower. Both are full tower cases from Phanteks designed for extensive cooling and cable management. They share a similar internal layout with hidden power supplies and drive bays. The main difference is the side panel material. One model uses solid metal, while the other features tempered glass. This choice affects airflow visibility and structural weight.
Key differences
| Aspect | Phanteks Enthoo Pro Non-Window Full Tower | Phanteks Enthoo Pro Full Tower Tempered Glass |
|---|---|---|
| Side Panel | Solid metal (no window) | Tempered glass |
| Weight | 2.2 pounds | 24.3 pounds |
| Lighting | Not listed | Integrated RGB lighting |
| Front I/O | 2x USB 3.0, USB-C, Mic, Headphone | 2x USB 3.0, USB-C, Mic, Headphone, Reset, RGB Switch |
Which one should you choose?
Choose Phanteks Enthoo Pro Non-Window Full Tower if
- You prefer a lighter chassis that is easier to move.
- You want to hide your components behind a solid panel.
- You do not need built-in RGB lighting controls.
Choose Phanteks Enthoo Pro Full Tower Tempered Glass if
- You want to display your internal hardware through glass.
- You need front panel controls for RGB lighting.
- You do not mind the extra weight of the glass panel.
Verdict: Choose the non-window model if you prioritize a lighter build and want to conceal your components. Pick the tempered glass version if you want to showcase your hardware and need dedicated RGB controls on the front panel.
Phanteks Enthoo Pro Side by Side
side panel visibility
You get a clear choice in how you display your hardware. The Phanteks Enthoo Pro Non-Window Full Tower features a solid black side panel with no glass. This design hides your components completely, offering a stealth interior look. In contrast, the Phanteks Enthoo Pro Full Tower Tempered Glass includes a tempered glass side panel. This allows you to showcase your internal build and lighting. If you want to show off your rig, the glass model is the better option. If you prefer a clean, hidden aesthetic, the non-window version suits you better.
included cooling fans
Both cases come with premium Phanteks SP series fans to ensure good airflow. The Non-Window model includes one 200mm fan in the front and one 140mm fan in the rear. It also features a PWM hub to control all connected fans through a single connector. The Tempered Glass model does not list specific included fan sizes in its key specs. It mentions easy accessibility to fans and dust filters, but does not specify the quantity or size of pre-installed units. The Non-Window model provides more explicit cooling hardware out of the box.
physical dimensions
These full tower cases have slightly different physical footprints. The Non-Window model measures 10 inches in width, 21 inches in height, and 22 inches in length. The Tempered Glass model is slightly narrower at 9.25 inches wide, 21.1 inches tall, and 21.7 inches long. The Non-Window version is also significantly lighter, weighing just 2.2 pounds compared to the 24.3 pounds of the glass model. The glass model is much heavier, likely due to the tempered glass panel. Consider your desk space and weight capacity when choosing between these two.
front connectivity
The front ports on both cases are quite similar. The Non-Window model offers two USB 3.0 ports, a USB-C Gen 2 port, and combined Mic and Headphone jacks. The Tempered Glass model includes two USB 3.0 ports, a USB-C Gen 2 port, Mic and Headphone jacks, plus a Reset button and an RGB Switch. The Tempered Glass version adds physical controls for resetting the system and managing RGB lighting. If you want direct control over your lighting and easy reset access, the glass model has a slight edge in connectivity.
lighting support
Lighting capabilities differ between the two models. The Tempered Glass model explicitly supports RGB lighting. It is compatible with Phanteks RGB LED strips and RGB motherboards, allowing for synchronized effects. It also includes an RGB Switch on the front panel for manual control. The Non-Window model does not mention any RGB support or lighting compatibility in its features. It focuses on stealth and cooling rather than illumination. If you plan to use RGB strips or motherboard-synced lighting, the Tempered Glass model is the necessary choice.
storage mounting
Both cases prioritize a clean interior with hidden power supplies and drive bays. The Non-Window model features a closed HDD panel that strengthens chassis rigidity, even without cages. It includes a removable Drop-n-Lock SSD bracket that can be installed in two different locations. The Tempered Glass model mentions an optical drive bay and reservoir mounts for water cooling. It does not specify the type of SSD brackets or HDD cage removal details. The Non-Window model provides more specific details on its flexible SSD mounting options.
Choose your Phanteks Enthoo Pro model
Users wanting to show off internal RGB lighting
The tempered glass side panel lets you see your components clearly. It supports RGB strips and connects to RGB motherboards. You also get an RGB switch on the front panel. This model highlights your build aesthetics while keeping the clean interior layout that Phanteks is known for.
Users preferring a stealth look with no glass
This version features a solid black side panel with no window. It offers a stealth interior that hides your power supply and hard drives completely. The brushed plastic and aluminum appearance provide a professional look. You get the same extensive cooling support without the visual exposure of tempered glass.
Users prioritizing maximum included fan cooling performance
This model includes a 200mm fan in the front and a 140mm fan in the rear. Both are Phanteks SP series fans designed for better performance. The PWM hub allows you to control all connected fans through a single connector. This setup provides strong airflow capacity right out of the box.
The products compared
Phanteks Enthoo Pro Non-Window Full Tower
Best for: water cooling enthusiasts needing hidden aesthetics
- Case Type
- Full Tower
- Included Fans
- 1x 200mm, 1x 140mm
- Dimensions
- 22 × 10 × 21 inches
- Weight
- 2.2 pounds
View on Amazon: Phanteks Enthoo Pro Non-Window Full Tower Affiliate link
This Phanteks Enthoo Pro is a full tower chassis without a window. It comes with a 200mm front fan and a 140mm rear fan. The design hides the power supply and hard drives for a clean look. You get USB 3.0, USB-C, and audio ports on the front. It supports extensive water cooling with space for multiple radiators. This model suits builders who prefer a solid exterior and strong airflow over glass visibility.
Pros
- Includes a 200mm front fan and 140mm rear fan
- Supports up to four radiator installations for water cooling
- Features a PWM hub for centralized fan control
- Hidden PSU and HDD design for clean aesthetics
- Front panel includes USB-C Gen 2 and USB 3.0
Cons
- No tempered glass window for side visibility
- Larger footprint at 21 inches high and 22 inches long
- Only one SSD bracket included with the case
Good fit if
- You want maximum airflow without glass obstruction
- You plan to install extensive custom water cooling loops
- You prefer a stealth interior with hidden components
Skip if
- You need a tempered glass window to showcase parts
- You require a compact case for small spaces
- You want multiple pre-installed SSD brackets included
Verdict: Phanteks Enthoo Pro Full Tower Non-Window is a robust option for builders prioritizing cooling capacity and a clean, hidden interior over visual transparency. It fits users who value extensive water cooling support and a solid, non-transparent side panel.
Phanteks Enthoo Pro Full Tower Tempered Glass
Best for: Full tower builds with glass side visibility
- Case Type
- Full Tower
- Side Panel
- Tempered Glass
- Motherboard Support
- ATX
- Lighting
- RGB
- Dimensions
- 21.7 × 9.25 × 21.1 inches
- Weight
- 24.3 pounds
View on Amazon: Phanteks Enthoo Pro Full Tower Tempered Glass Affiliate link
The Phanteks Enthoo Pro is a full tower ATX chassis featuring a tempered glass side panel and integrated RGB lighting. It measures 21.7 inches in length and weighs 24.3 pounds. You get front USB 3.0, USB-C Gen 2, and audio ports. The design includes hidden PSU and HDD areas for a clean interior. This model suits builders who want high visibility for their components and extensive connectivity options.
Pros
- Tempered glass side panel for component visibility
- Integrated RGB lighting compatible with RGB motherboards
- Front USB-C Gen 2 and dual USB 3.0 ports
- Hidden PSU and HDD bays for clean cable management
Cons
- Heavy at 24.3 pounds, making it difficult to move
- Large full tower footprint requires ample desk space
- No mention of wireless connectivity or smart app control
Good fit if
- You want a full tower with a glass side panel
- You need USB-C Gen 2 connectivity on the front
- You prefer a clean interior with hidden drive bays
Skip if
- You need a compact or mid-tower chassis
- You want a case without a window
- You prefer a lightweight build under 15 pounds
Verdict: Phanteks Enthoo Pro Full Tower with Tempered Glass fits users who prioritize component visibility and modern front I/O in a large chassis.
Specifications side by side
| Spec | Phanteks Enthoo Pro Non-Window Full Tower | Phanteks Enthoo Pro Full Tower Tempered Glass |
|---|---|---|
| Case Type | Full Tower | Full Tower |
| Side Panel | not stated | Tempered Glass |
| Included Fans | 1x 200mm, 1x 140mm | not stated |
| Motherboard Support | not stated | ATX |
| Tower Size | Full-Tower | not stated |
| Lighting | not stated | RGB |
| Dimensions | 22 × 10 × 21 inches | 21.7 × 9.25 × 21.1 inches |
| Weight | 2.2 pounds | 24.3 pounds |
| Color | BLACK NO WINDOW | Black |
| Model | PH-ES614PC_BK | PH-ES614PTG_BK |
| Size | not stated | Full Tower" |
Frequently asked questions
Which Phanteks Enthoo Pro model is heavier?
The tempered glass version weighs significantly more. The B078K32G27 model tips the scales at 24.3 pounds. In contrast, the non-window B00KFAG6DA variant weighs only 2.2 pounds. This large difference comes from the heavy glass panel. You should consider this if you plan to move the case often.
Does the non-window model have RGB lighting?
The provided data does not list RGB lighting for the non-window model. It is described as having a solid black side panel. The tempered glass version, however, explicitly supports RGB lighting and includes a front panel switch. If you want visible lighting effects, the glass model is the better choice.
Are both cases full tower size?
Yes, both models are classified as full tower cases. The non-window version has dimensions of 21 inches in height and 22 inches in length. The tempered glass model measures 21.1 inches high and 21.7 inches long. Both offer ample space for large components and extensive cooling setups.
What is the main difference in side panels?
The key difference is the side panel material. The non-window model features a solid black panel that hides internal components. The other model uses a tempered glass side panel for visibility. This allows you to see your hardware and any RGB lighting you install inside the chassis.
Which model is better for hidden aesthetics?
The non-window model is best for hidden aesthetics. Its solid black side panel conceals all internal hardware. This creates a clean, stealthy look for your build. The tempered glass version is designed for visibility instead, showcasing your components rather than hiding them behind a solid wall.
Do both models support ATX motherboards?
The data confirms ATX motherboard support for the tempered glass model. It does not explicitly list motherboard support for the non-window version. However, both are full tower cases with similar internal layouts. You can likely fit standard ATX boards in both, but the glass model explicitly guarantees this support.