Jungle Leopard Prism 6 MAX 120mm vs Jungle Leopard 120mm ARGB Reverse Fan: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the jungle leopard prism6 max x3 120mm argb PC case vs galaxy se 120mm. Both fans share a 120mm size, hydraulic bearings, and 5V 3-pin ARGB lighting. They also both offer reverse blade options and magnetic mounting. The main difference lies in their speed and airflow. The Prism 6 MAX reaches higher RPMs for more aggressive cooling. The Galaxy SE focuses on a balanced airflow profile with specific CFM ratings. You should choose based on your noise and airflow needs.
Key differences
| Aspect | Jungle Leopard Prism 6 MAX 120mm ARGB Fans | Jungle Leopard 120mm ARGB Reverse Fan 3-Pack |
|---|---|---|
| Max Fan Speed | 1850 RPM | 1600 RPM |
| Max Airflow | not listed | 58.36 CFM |
| Fan Pressure | not listed | 2.07 |
| Lighting Design | Three-sided Infinite Mirror | Dual-track RGB LED Strip |
| Weight (3-Pack) | 4.94 ounces | 15.9 ounces |
Which one should you choose?
Choose Jungle Leopard Prism 6 MAX 120mm ARGB Fans if
- You want higher maximum fan speeds for intense cooling
- You prefer a lighter fan set for easier handling
- You like the three-sided infinite mirror light effect
Choose Jungle Leopard 120mm ARGB Reverse Fan 3-Pack if
- You need specific airflow and static pressure numbers
- You prefer the dual-track RGB LED lighting style
- You want a fan set with a higher listed weight
Verdict: The Prism 6 MAX is better if you prioritize higher RPMs and a distinct mirror lighting effect. The Galaxy SE is the right choice if you need precise airflow metrics and prefer a different LED strip design. Both options deliver quiet operation and magnetic mounting convenience.
Prism 6 MAX vs Galaxy SE Specs
Maximum speed
The Jungle Leopard Prism 6 MAX reaches a maximum speed of 1850 RPM, with a tolerance of plus or minus 10%. This allows for higher airflow when you need rapid cooling. The Galaxy SE tops out at 1600 RPM. While its minimum speed is slightly lower at 1000 RPM compared to the Prism 6 MAX's 800 RPM, the peak performance is clearly lower. If you prioritize raw air movement, the Prism 6 MAX has the advantage.
Airflow and pressure
The Galaxy SE provides specific airflow and static pressure metrics. It delivers 58.36 CFM of air volume and 2.07 inches of water column of static pressure. The Prism 6 MAX data does not list these exact airflow or pressure numbers. Without those figures, you cannot determine if the Prism 6 MAX moves more air despite its higher RPM. The Galaxy SE offers transparent performance data for cooling efficiency.
Lighting design
Both fans use 5V 3-pin ARGB connectors for motherboard synchronization. The Prism 6 MAX features a three-sided infinite mirror effect with multiple layers 0.5mm apart, creating a deep geometric visual. The Galaxy SE uses a dual-track RGB LED light strip design. It presents a translucent yet vibrant effect. The Prism 6 MAX offers a more complex structural light design, while the Galaxy SE focuses on strip-based brightness.
Noise levels
Both fans share the same maximum noise specification of 29 dBA. The Prism 6 MAX lists this as less than or equal to 29 dBA. The Galaxy SE lists it as exactly 29 dBA. Since both are rated to the same decibel ceiling, neither fan has a clear acoustic advantage based on the provided data. You can expect similar noise output at their respective maximum speeds.
Weight and build
The weight specifications differ significantly between the two models. The Prism 6 MAX weighs 4.94 ounces for its package. The Galaxy SE weighs 15.9 ounces for its package. This suggests the Galaxy SE package contains more components or heavier materials, possibly due to the dual-track lighting or packaging differences. The Prism 6 MAX is lighter, which may matter for shipping or handling, though the per-fan weight is not explicitly broken down.
Which fan suits your build
Users seeking maximum airflow and cooling
The Prism 6 MAX reaches 1850 RPM, offering higher potential airflow than the Galaxy SE. This speed allows you to push more air through your chassis for rapid heat dissipation. The hydraulic bearing ensures stable operation at these higher speeds while maintaining noise levels at 29 dBA. Choose this model if your priority is raw cooling performance over visual effects.
Buyers wanting advanced lighting effects
This fan features a three-sided infinite mirror design with multiple layers. The center circular mirror uses infinite geometry for a deeper visual impact. The Galaxy SE uses a dual-track LED strip which is simpler. If you want complex light patterns and a more premium aesthetic, the Prism 6 MAX provides a superior visual experience for your case interior.
Shoppers preferring lower speed and pressure
The Galaxy SE maxes out at 1600 RPM with 2.07 mmH2O static pressure. This lower speed profile may suit builds where extreme cooling is not the primary goal. The design focuses on balanced airflow at 58.36 CFM. If you prefer a quieter operation at top speed and do not need the higher RPM of the MAX series, this fan is a practical choice.
The products compared
Jungle Leopard Prism 6 MAX 120mm ARGB Fans
Best for: Reverse airflow builds with 5V ARGB support
- Fan Size
- 120mm
- Max Fan Speed
- 800-1850±10% RPM
- Noise Level
- ≤29DBA
- Connector Type
- small 4Pin
- Bearing Type
- Hydraulic bearing
- Lighting Type
- ARGB
View on Amazon: Jungle Leopard Prism 6 MAX 120mm ARGB Fans Affiliate link
This 120mm reverse fan uses a hydraulic bearing and 9-blade design to manage airflow. It reaches 1850 RPM with noise capped at 29 dBA. The 5V 3-Pin ARGB lighting creates a three-sided infinite mirror effect. You get a magnetic base and silicone pads to reduce resonance. It suits builds needing reverse airflow with visible lighting effects.
Pros
- 1850 RPM max speed for strong airflow
- Three-sided infinite mirror ARGB lighting
- Hydraulic bearing for reduced wear and noise
- Magnetic suction base for easy mounting
Cons
- Requires 5V 3-Pin motherboard header
- No included controller for sync
- 29 dBA noise level is moderate
Good fit if
- You need reverse airflow for your case
- You want visible three-sided lighting effects
- Your motherboard supports 5V ARGB headers
Skip if
- Your motherboard lacks 5V 3-Pin headers
- You prefer silent operation under 20 dBA
- You do not want magnetic mounting options
Verdict: Jungle Leopard Prism 6 MAX 120mm ARGB Reverse Fan fits builders who need reverse airflow and want prominent three-sided lighting. It works well if your board supports 5V ARGB and you value magnetic mounting.
Jungle Leopard 120mm ARGB Reverse Fan 3-Pack
Best for: Reverse exhaust mounts with 5V ARGB support
- Fan Size
- 120mm
- Max Fan Speed
- 1600 RPM
- Max Airflow
- 58.36 CFM
- Noise Level
- 29 dBA
- Connector Type
- 4-pin
- Bearing Type
- Hydraulic
View on Amazon: Jungle Leopard 120mm ARGB Reverse Fan 3-Pack Affiliate link
The Jungle Leopard Galaxy SE 120mm ARGB fan features a reverse blade design for rear exhaust or top intake mounting. It delivers 58.36 CFM airflow at up to 1600 RPM with a maximum noise level of 29 dBA. The dual-track RGB strip creates an infinity mirror effect via a 5V 3-pin connector. This hydraulic bearing fan includes magnetic mounting and silicone pads to reduce resonance. It suits builds requiring quiet, high-pressure reverse airflow with synchronized lighting.
Pros
- Reverse blade design for specific case mounting positions
- Dual-track RGB LED strip for infinity mirror lighting
- Hydraulic bearing for reduced wear and noise
- Magnetic suction base for easy installation
- Silicone shock pads to minimize resonance
Cons
- Requires a 5V 3-pin motherboard header for ARGB control
- No included controller if the motherboard lacks the correct ARGB header
- Single fan unit rather than a pre-synced pack
Good fit if
- You need reverse airflow fans for rear or top exhaust
- Your motherboard has a 5V 3-pin ARGB header
- You want magnetic mounting for quick installation
Skip if
- Your motherboard only supports 12V 4-pin ARGB
- You require 12V 4-pin ARGB compatibility
- You prefer forward airflow for intake positions
Verdict: The Jungle Leopard Galaxy SE 120mm Reverse ARGB Fan is a solid choice for users building with reverse exhaust setups who have compatible 5V 3-pin motherboard headers. It balances quiet operation with vibrant lighting effects.
Specifications side by side
| Spec | Jungle Leopard Prism 6 MAX 120mm ARGB Fans | Jungle Leopard 120mm ARGB Reverse Fan 3-Pack |
|---|---|---|
| Fan Size | 120mm | 120mm |
| Max Fan Speed | 800-1850±10% RPM | 1600 RPM |
| Max Airflow | not stated | 58.36 CFM |
| Noise Level | ≤29DBA | 29 dBA |
| Connector Type | small 4Pin | 4-pin |
| Bearing Type | Hydraulic bearing | Hydraulic |
| Lighting Type | ARGB | 5V 3-pin ARGB |
| Blade Direction | Reverse | Reverse |
| Lighting | ARGB | ARGB |
| Dimensions | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches |
| Weight | 4.94 ounces | 15.9 ounces |
| Size | 6Max_Reverse_3Pack | Galaxy SE_Reverse_3Pack |
| Color | White | White |
| Model | prism 6 MAX 3IN1 | Galaxy SE |
Frequently asked questions
Are these fans suitable for reverse airflow builds?
Yes, both models are designed for reverse airflow configurations. The Prism 6 MAX and Galaxy SE both feature reverse blade options. This allows you to mount them for exhaust duties while maintaining the correct airflow direction. They fit well in cases that support reverse intake or exhaust setups.
What lighting connector do these fans use?
Both fans use a 5V 3-pin ARGB connector. This ensures compatibility with most modern motherboards that support addressable RGB lighting. You can sync the lighting effects with your system if your motherboard header matches this standard. The Prism 6 MAX offers three-sided lighting for a more prominent visual effect.
How do the dimensions compare between the two models?
Both fans share the same 120mm footprint with identical width and length of 4.72 inches. The height is 0.98 inches for both units. However, the Galaxy SE 3-pack weighs 15.9 ounces, while the Prism 6 MAX 3-pack weighs 4.94 ounces. This difference likely reflects the additional lighting components in the MAX model.
Do these fans include magnetic mounting options?
Yes, magnetic mounting is a feature for both the Prism 6 MAX and the Galaxy SE. This allows for easier installation and removal without needing additional screws. It is useful for quick adjustments or cleaning. You can rely on the magnets to hold the fans securely in place within your case.
Is the Prism 6 MAX better for lighting effects?
The Prism 6 MAX is better if you want prominent lighting. It features three-sided ARGB illumination, which provides a more vibrant look compared to standard single-sided designs. The Galaxy SE also offers ARGB but focuses more on balancing quiet operation with lighting. Choose the MAX for maximum visual impact.
Can I use these fans for quiet operation?
The Galaxy SE is noted for balancing quiet operation with lighting effects. It is a solid choice if you prioritize lower noise levels. The Prism 6 MAX reaches higher speeds for better airflow, which may increase noise. If silence is your main goal, the Galaxy SE is the more practical option.
What is included in the package?
Both products are sold as 3-packs. The Prism 6 MAX comes in a 3-in-1 configuration, while the Galaxy SE is also a 3-pack. You receive three fans per package. This allows you to cover multiple vents in your case simultaneously. Both are available in white color options.