Jungle Leopard Interstellar V2 120mm Triple vs Jungle Leopard Interstellar V3 120mm Fan (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison covers the jungle leopard interstellar v2 120mm PC case vs interstellar v3 120mm. Both models are 120mm fans with daisy-chain designs and similar airflow specs. They share a maximum noise level of 29 dBA and support 5V ARGB lighting. The main difference lies in their blade design and airflow control. The V2 uses bionic blades, while the V3 features straight blades with a reversible airflow button. This allows the V3 to switch between forward and reverse modes easily.
Key differences
| Aspect | Jungle Leopard Interstellar V2 120mm Triple Pack | Jungle Leopard Interstellar V3 120mm Fan 3-Pack |
|---|---|---|
| Blade Design | Bionic blade design | Straight blade design |
| Max Airflow | 68 CFM | 68.5 CFM |
| Airflow Control | Fixed direction | Reversible via cable button |
| Reverse Mode Speed | Not listed | 800 to 1850 RPM |
| Color Options | Black | White Forward, Black Forward |
Which one should you choose?
Choose Jungle Leopard Interstellar V2 120mm Triple Pack if
- You prefer a fixed airflow direction with a bionic blade design.
- You want a black color option for your build.
- You need standard 5V 3-Pin ARGB synchronization.
Choose Jungle Leopard Interstellar V3 120mm Fan 3-Pack if
- You want to easily switch between forward and reverse airflow.
- You prefer the slightly higher maximum airflow of 68.5 CFM.
- You want a white color option for your case.
Verdict: Choose the V2 if you prefer a fixed airflow direction and a black finish. Select the V3 if you need reversible airflow control or want a white color option. Both fans offer similar noise levels and lighting support.
V2 vs V3 Fan Specs
Airflow performance
Jungle Leopard Interstellar V2 fans deliver up to 68 CFM of airflow at their maximum speed. The Interstellar V3 fans offer a slightly higher maximum of 68.5 CFM in forward push button mode. Both models maintain a maximum noise level of 29 dBA. This means the V3 provides a marginal increase in air movement. You get more air volume with the newer design. The difference is small but measurable. If maximum airflow is your priority, the V3 has a slight advantage. The V2 remains a strong option with nearly identical performance.
Airflow direction
The Interstellar V3 includes a button on the cable to switch airflow direction between forward and reverse modes. This feature allows you to change the case airflow without moving the fans. The V2 data does not mention a direction switch button. The V2 uses a bionic blade design optimized for one direction. The V3 uses a straight blade design to equalize airflow in both directions. If you want flexible airflow management, the V3 is superior. The V2 requires physical reinstallation to change direction.
Lighting type
Both fans support 5V 3-Pin ARGB synchronization with major motherboard manufacturers. This allows for 16 million color customization. The V2 features an upgraded side infinity mirror splicing for a stronger lighting effect. The V3 also uses a surround infinity mirror for a 3D visual sense. Both models provide stunning aesthetics under ARGB light strips. The V2 highlights its improved lighting durability and softness. The V3 focuses on the mirror effect. Both offer similar lighting capabilities for your build.
Fan speed range
The Interstellar V2 operates between 800 and 2000 RPM using PWM intelligent temperature control. The Interstellar V3 operates between 800 and 2000 RPM in forward mode. In reverse mode, the V3 drops to 1850 RPM. Both models use a 4-Pin PWM connector for motherboard control. The V2 maintains a consistent upper speed limit. The V3 has a lower maximum speed in reverse mode. If you need consistent high-speed performance in both directions, the V2 is more stable. The V3 offers flexibility at the cost of reduced reverse speed.
Connector design
Both models feature a daisy-chain design with a slide-in pin-to-pin interlocking mechanism. This allows for quicker installation and cleaner chassis interiors. Only one cable is required for each fan cluster. The V2 mentions upgraded nylon mesh security for increased cable durability. The V3 data does not specify the cable material. Both designs solve installation line management efficiently. The V2 offers a specific durability upgrade for the cables. The V3 focuses on the ease of airflow switching. Both provide a clean and flexible wiring solution.
Which Interstellar V2 or V3 Fan
Users wanting simple forward airflow management
The V2 model is designed for standard forward airflow. It provides up to 68 CFM of air movement with a maximum speed of 2000 RPM. You get stable performance with a noise level of 29 dBA or less. The daisy-chain design simplifies cable management for a cleaner chassis interior without the need for directional switching.
Builders needing flexible forward and reverse airflow
The V3 model includes a button on the cable to switch between forward and reverse airflow directions. In forward mode, it delivers 68.5 CFM at 2000 RPM. In reverse mode, it provides 64 CFM at 1850 RPM. This feature allows you to adjust case airflow easily without changing fan placement, offering greater flexibility for your build.
Shoppers preferring white color options
The V3 is available in a White Forward configuration. This color option helps you match white PC components or chassis interiors. It retains the same 120mm size and daisy-chain connectivity as the black V2. The visual aesthetic of the infinity mirror lighting complements lighter builds effectively while maintaining the same 5V ARGB synchronization capabilities.
The products compared
Jungle Leopard Interstellar V2 120mm Triple Pack
Best for: builders needing strong airflow and RGB sync
- Fan Size
- 120mm
- Max Fan Speed
- 2000 RPM
- Max Airflow
- 68CFM
- Noise Level
- 29dBA
- Connector Type
- 4PIN PWM
- Lighting Type
- 5V 3PIN ARGB
View on Amazon: Jungle Leopard Interstellar V2 120mm Triple Pack Affiliate link
This triple-pack of 120mm case fans focuses on airflow and lighting. It delivers up to 68 CFM of air at speeds reaching 2000 RPM. The design uses bionic blades to maximize wind pressure while keeping noise at or below 29 dBA. You get 5V ARGB lighting that syncs with motherboard headers. The package includes daisy-chain cables for easier installation and cleaner cable management inside your chassis.
Pros
- High airflow of 68 CFM per fan
- Daisy-chain design simplifies wiring and installation
- 5V 3-Pin ARGB syncs with major motherboards
- Noise level stays at 29 dBA or less
Cons
- Noise level is higher than premium quiet fans
- Requires specific 5V 3-Pin ARGB motherboard header
- No included hub for fans without ARGB headers
Good fit if
- You need high airflow for active cooling
- You want synchronized RGB lighting effects
- You prefer cleaner cable management with daisy chains
Skip if
- You require ultra-quiet operation below 20 dBA
- Your motherboard only supports 12V 4-Pin RGB
- You prefer fans without lighting effects
Verdict: Jungle Leopard Interstellar V2 120mm Triple Fan is a solid choice for builders prioritizing airflow and RGB sync. It fits cases where you need strong cooling performance and visible lighting customization.
Jungle Leopard Interstellar V3 120mm Fan 3-Pack
Best for: Flexible airflow direction and clean daisy-chain wiring
- Fan Size
- 120mm
- Max Fan Speed
- 2000 RPM
- Max Airflow
- 68.5 CFM
- Noise Level
- ≤29 dBA
- Connector Type
- PWM
- Lighting Type
- ARGB
View on Amazon: Jungle Leopard Interstellar V3 120mm Fan 3-Pack Affiliate link
The Jungle Leopard Interstellar V3 120mm fan features a straight blade design for consistent airflow in both forward and reverse modes. It reaches 2000 RPM with 68.5 CFM in push mode, while reverse mode caps at 1850 RPM and 64 CFM. The daisy-chain cable simplifies installation, and the infinity mirror ARGB effect adds visual depth. It suits builders who value flexible airflow direction and clean cable management.
Pros
- Daisy-chain design simplifies installation and cable management
- Button on cable switches airflow direction for all connected fans
- Straight blade design equalizes airflow in forward and reverse modes
- Infinity mirror ARGB lighting creates a 3D visual effect
Cons
- Reverse mode reduces max speed to 1850 RPM
- Reverse mode lowers max airflow to 64 CFM
- No mention of software control for lighting or speed
Good fit if
- You want to easily switch between intake and exhaust
- You prefer a cleaner interior with daisy-chain wiring
- You like infinity mirror ARGB lighting effects
Skip if
- You need software-controlled RGB synchronization
- You require maximum airflow in both directions
- You prefer silent operation below 20 dBA
Verdict: Jungle Leopard Interstellar V3 120mm ARGB Fan is ideal for builders who want flexible airflow direction and clean daisy-chain wiring with visual flair. It fits those who value easy installation and aesthetic infinity mirror lighting over maximum performance in reverse mode.
Specifications side by side
| Spec | Jungle Leopard Interstellar V2 120mm Triple Pack | Jungle Leopard Interstellar V3 120mm Fan 3-Pack |
|---|---|---|
| Fan Size | 120mm | 120mm |
| Max Fan Speed | 2000 RPM | 2000 RPM |
| Max Airflow | 68CFM | 68.5 CFM |
| Noise Level | 29dBA | ≤29 dBA |
| Connector Type | 4PIN PWM | PWM |
| Lighting Type | 5V 3PIN ARGB | ARGB |
| Blade Direction | not stated | Forward / Reverse |
| Lighting | ARGB | RGB |
| Dimensions | 4.72 × 4.72 × 0.98 inches | 4.72 × 4.72 × 0.98 inches |
| Weight | not stated | 1.37 pounds |
| Size | 3 x 120mm | Interstellar V3-3Pack |
| Color | Black | White Forward |
| Model | JM-V2 3IN1 | JL-V3 3IN1 WH |
Frequently asked questions
Does the V2 pack come in white?
No, the Jungle Leopard Interstellar V2 120mm Triple Pack is available in black only. The data lists the color as black for this model. If you prefer white lighting or housing, you should look at the V3 series, which offers a white forward option.
What is the weight of the V3 fans?
The V3 120mm fan pack weighs 1.37 pounds. This weight applies to the entire three-pack unit. The V2 specifications do not list a weight, so you cannot compare the exact mass of the two packages using the provided data.
Are the V2 fans suitable for reverse airflow?
The V2 fans are best for builders needing strong airflow and RGB sync, typically in standard forward configurations. The V3 model is specifically highlighted for flexible airflow direction and clean daisy-chain wiring. If you need versatile reverse airflow management, the V3 is the better choice.
Do both fans support 5V ARGB?
Yes, both models support 5V ARGB lighting. The comparison section confirms they share this feature. The V3 also explicitly lists RGB in its attributes, ensuring you get visual customization with either the V2 or V3 packs for your case build.
Which model has the higher maximum airflow?
The V3 fans offer a slightly higher maximum airflow of 68.5 CFM in forward push button mode. The V2 fans deliver up to 68 CFM. This is a minimal difference, but the V3 holds the edge in raw air movement specifications.
What is the model number for the V3 white pack?
The model number for the white V3 pack is JL-V3 3IN1 WH. This identifies the specific variant with white housing and forward airflow. The V2 model number is JM-V2 3IN1, which corresponds to the black triple pack version.