Jungle Leopard 120mm ARGB Reverse Fan Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This jungle leopard galaxy se 120mm argb review covers the Galaxy SE reverse fan. It is a 120mm case fan designed for airflow and lighting. The unit reaches a maximum speed of 1600 RPM. This speed supports an airflow of 58.36 CFM. It maintains a noise level of 29 dBA. The fan uses a hydraulic bearing for stability. It features 5V 3-pin ARGB lighting. This setup suits builds needing balanced cooling. The reverse blade design fits specific mounting needs. You get three fans in this pack. The lighting creates a vibrant visual effect. Check your motherboard ports before buying.
What stands out
- 120mm size with 58.36 CFM max airflow
- 1600 RPM max speed for strong air movement
- 29 dBA noise level for quiet operation
- 5V 3-pin ARGB lighting for sync control
- Hydraulic bearing for reduced wear and noise
Who it fits
Good fit for
You should choose these fans if you need quiet cooling with visible lighting. The 29 dBA rating helps if you value silence. The 58.36 CFM airflow supports standard PC cases. The 5V 3-pin ARGB works with compatible motherboards. The reverse blade design fits cases with front-mounted intakes. You get three fans for a complete setup. The hydraulic bearing ensures long-term reliability. This option suits users wanting balanced performance and style.
Who should skip it
Skip this product if your motherboard lacks 5V 3-pin headers. You will need a separate control box for lighting sync. Do not buy if you need PWM fan control. These fans use a 4-pin power connector only. The speed is fixed to the 4-pin supply. You cannot adjust fan speed via software. If you need variable speed control, look elsewhere. This fan is not for silent-only builds seeking ultra-low RPMs.
Verdict: The Galaxy SE reverse fan offers solid airflow and quiet operation for compatible systems. It is a practical choice for users needing 5V ARGB sync and standard 120mm cooling.
Key specs explained
Max Fan Speed: 1600 RPM
This value indicates the highest rotational speed the motor can achieve. At this rate, the fan moves air quickly to clear heat from your components. You will notice stronger cooling when the system is under heavy load. However, higher speeds also generate more noise. If you prioritize silence, you may run the fan at lower speeds. This spec helps you compare cooling potential against other 120mm fans.
Max Airflow: 58.36 CFM
CFM stands for cubic feet per minute. This number measures the volume of air the fan pushes through the chassis. A higher CFM means better ventilation for your CPU and GPU. You can use this spec to judge if the fan fits your case size. Larger cases may need higher airflow to maintain stable temperatures. Compare this figure with other fans to find the best balance for your build.
Noise Level: 29 dBA
Decibels measure sound intensity. A rating of 29 dBA is considered quiet for a case fan. You will likely hear little to no noise during normal use. This level is suitable for bedrooms or quiet offices. If you plan to overclock, noise may increase. Check if this spec aligns with your tolerance for background hum. Lower dBA values generally indicate a more peaceful computing environment.
Lighting Type: 5V 3-pin ARGB
This specifies the electrical interface for the LED lights. The 5V 3-pin connector allows synchronization with compatible motherboards. You can control colors and effects via software. Ensure your motherboard has this specific header. If it lacks the port, you may need a separate controller. This standard is common for modern RGB builds. It ensures consistent lighting across multiple fans in your system.
Design and build details
According to the listing, the Jungle Leopard Galaxy SE fan measures 4.72 by 4.72 inches with a depth of 0.98 inches. The frame is white and weighs 15.9 ounces for the three-pack. This standard 120mm size fits most common chassis intake or exhaust slots. The reverse blade orientation is specific for mounting on the exterior side of a case panel. This allows the airflow to pull heat out while keeping the decorative side visible from the outside.
The unit uses a hydraulic bearing type. This design aims to reduce wear and lower operational noise during high-speed runs. The listing notes a maximum speed of 1600 RPM and a noise level of 29 dBA. You get 58.36 CFM of air volume at peak performance. The dual-track RGB LED strip provides vibrant lighting effects. It connects via a 5V 3-pin ARGB header for light synchronization. The power connector is a standard 4-pin fan plug.
Installation features include magnetic suction on the bottom and double-sided silicone shock pads. These pads reduce resonance noise when attached to the chassis. The magnetic feature helps align the fan with steel mounting points. You must verify your motherboard has a 5V 3-pin header. If it lacks this port, you will need a separate control box for the lighting sync. The white finish complements light-colored cases.
Setup and everyday use notes
Setting up these fans requires checking your motherboard connectors before installation. The listing specifies a 5V 3-pin ARGB interface for lighting control. This is distinct from the 4-pin power connector used for fan operation. You must verify that your system board includes a 5V 3-pin header. If your motherboard lacks this specific port, you will need to purchase a separate control box to synchronize the lighting effects. Without this adapter, the RGB features will not function correctly. The power connection is standard 4-pin, which typically draws speed control signals from your case fan hub or motherboard PWM header.
In daily use, the hydraulic bearing design aims to reduce wear and maintain quiet operation. The listed noise level is 29 dBA at maximum speed. This balance of airflow and acoustics suits users who want consistent cooling without excessive volume. The dual-track RGB LEDs provide a vibrant infinity mirror effect. This lighting is visible from both sides, which helps if you mount the fans in locations where the reverse blade orientation is visible. The silicone shock pads are included to minimize resonance noise against the chassis frame. These pads help maintain the low noise profile during high-speed operation. The magnetic suction feature on the fan bottom suggests it can attach to steel surfaces, offering flexible mounting options for custom builds. Ensure you confirm the 5V 3-pin requirement to avoid compatibility issues during setup.
Before you buy these fans
You need to verify your motherboard has a 5V 3-pin ARGB header before purchasing. The listing warns that standard 4-pin headers do not support the lighting sync. If your board lacks this specific connector, you will need to buy a separate control box. This adds complexity to your build and requires extra cable management. The hydraulic bearing design suggests low maintenance, but you should still keep dust filters clean to maintain the 29 dBA noise level. These fans fit well alongside other 120mm options in your case. They work best when paired with forward-flow fans for balanced airflow. Check your chassis depth to ensure the 0.98-inch profile clears nearby components. The magnetic suction feature helps with installation but does not replace standard mounting screws. Ensure you have enough free headers for both power and lighting signals. This product suits users who prioritize quiet operation and synchronized RGB effects over maximum static pressure.
Check before you buy
- Verify your motherboard has a 5V 3-pin ARGB header
- Check if you need a separate lighting control box
- Confirm your case supports 120mm fan mounting points
- Ensure sufficient free fan headers for power and lighting
The product at a glance
Jungle Leopard 120mm ARGB Reverse Fan 3-Pack
Best for: quiet reverse airflow builds with ARGB support
- Fan Size
- 120mm
- Max Fan Speed
- 1600 RPM
- Max Airflow
- 58.36 CFM
- Noise Level
- 29 dBA
- Connector Type
- 4-pin
- Bearing Type
- Hydraulic
View on Amazon: Jungle Leopard 120mm ARGB Reverse Fan 3-Pack Affiliate link
This 120mm reverse fan features a hydraulic bearing and 5V 3-pin ARGB connectivity. It delivers up to 58.36 CFM airflow at 1600 RPM with a max noise level of 29 dBA. The dual-track LED strip provides an infinity mirror effect. It suits builders needing quiet, high-pressure airflow for reverse mounting in their case.
Pros
- Hydraulic bearing for reduced wear and noise
- 5V 3-pin ARGB for motherboard sync
- 1600 RPM max speed with 2.07 in-H2O static pressure
- Silicone shock pads to minimize resonance
Cons
- Requires 5V 3-pin motherboard header for lighting
- No included controller if motherboard lacks ARGB header
- Hydraulic bearing may have shorter lifespan than fluid dynamic bearings
Good fit if
- You need reverse airflow for front intake or rear exhaust
- You want silent operation under 29 dBA
- You have a 5V 3-pin ARGB header on your motherboard
Skip if
- Your motherboard only supports 12V 4-pin RGB
- You require a fan with a built-in controller
- You need a fan with a 120mm forward rotation
Verdict: Jungle Leopard Galaxy SE 120mm ARGB Reverse Fan offers quiet, high-pressure cooling for reverse mounts. It fits users with compatible ARGB headers who prioritize low noise levels.
Specifications side by side
| Spec | Jungle Leopard 120mm ARGB Reverse Fan 3-Pack |
|---|---|
| Fan Size | 120mm |
| Max Fan Speed | 1600 RPM |
| Max Airflow | 58.36 CFM |
| Noise Level | 29 dBA |
| Connector Type | 4-pin |
| Bearing Type | Hydraulic |
| Lighting Type | 5V 3-pin ARGB |
| Blade Direction | Reverse |
| Lighting | ARGB |
| Dimensions | 4.72 × 0.98 × 4.72 inches |
| Weight | 15.9 ounces |
| Size | Galaxy SE_Reverse_3Pack |
| Color | White |
| Model | Galaxy SE |
Frequently asked questions
Is the Jungle Leopard Galaxy SE fan compatible with standard 4-pin PWM headers?
No, the listing specifies a 5V 3-pin ARGB interface for lighting control. This connector type is distinct from the 4-pin power connector used for standard fan operation. You must verify your motherboard has the specific 3-pin header to sync the lighting effects. Using incompatible headers will not activate the ARGB features.
What does the reverse airflow design mean for my case setup?
This fan is designed for reverse mounts, typically used on the top or rear of a PC case. It pushes air out of the chassis rather than pulling it in. This configuration helps create a consistent airflow path when paired with standard intake fans at the front. It is ideal for builds prioritizing exhaust efficiency.
How many fans come in the Jungle Leopard Galaxy SE package?
The product listing identifies this item as a 3-Pack. You will receive three individual 120mm fans in the box. This allows you to install multiple units simultaneously for balanced cooling and uniform lighting across your system. The total weight for the three-pack is listed as 15.9 ounces.
Can I control the ARGB lighting speed and brightness?
Yes, the fan includes ARGB capabilities that require a compatible motherboard header. The listing notes a 5V 3-pin connector for lighting control. This interface allows you to sync the white lighting effects with other compatible components in your build. Ensure your software supports this specific voltage and pin configuration.
What is the physical size of the Jungle Leopard Galaxy SE fan?
The fan measures 4.72 by 4.72 inches with a depth of 0.98 inches. This standard 120mm form factor fits most common chassis mounts. The white frame design is consistent with the listed color. These dimensions ensure compatibility with standard mounting holes found in most mid-tower and full-tower PC cases.
Is this fan suitable for quiet builds?
The verdict highlights quiet, high-pressure cooling for reverse mounts. It is described as suitable for users who prioritize low noise levels. While specific decibel ratings are not provided in the data, the design targets quiet operation alongside high airflow. This makes it a practical choice for users seeking a balanced acoustic experience.