UTLGAMENG Micro ATX Case 80mm or UTLGAMENG Mini-ITX PC Case? Which UTLGAMENG Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the utlgameng micro atx case 80mm vs mini itx PC case. Both models are black, support ATX power supplies, and prioritize high airflow in a compact footprint. The main difference lies in their form factor and cooling approach. One supports Micro-ATX boards with a single 80mm fan, while the other is strictly for Mini-ITX with dual 120mm ARGB fans. You need to decide which motherboard size fits your build.
Key differences
| Aspect | UTLGAMENG Micro ATX Case with 80mm Fan | UTLGAMENG Mini-ITX ARGB Case |
|---|---|---|
| Motherboard Support | Micro-ATX and ITX | Mini-ITX only |
| Included Fans | 1x 80mm PWM | 2x 120mm ARGB |
| Side Panel | Steel plate and magnetic mesh | Textured mesh front |
| Max GPU Length | 250mm (without HDD) | 225mm |
| Lighting | Not listed | ARGB with 5V 3-pin controller |
Which one should you choose?
Choose UTLGAMENG Micro ATX Case with 80mm Fan if
- You need to build with a Micro-ATX motherboard
- You prefer a simpler setup without RGB lighting
- You require slightly more GPU length clearance
Choose UTLGAMENG Mini-ITX ARGB Case if
- You are building a strict Mini-ITX system
- You want pre-installed ARGB fans for aesthetics
- You prioritize a textured mesh front panel design
Verdict: Choose the Micro-ATX model if you need broader motherboard compatibility and a straightforward, fan-focused design. Pick the Mini-ITX ARGB case if you are building a small form factor PC and want customizable lighting effects. Both options offer high airflow for their respective sizes.
UTLGAMENG Case Comparison Guide
Motherboard Support
The UTLGAMENG Micro ATX Case with 80mm Fan supports both Micro ATX motherboards, with a maximum size of 24.5x24.5cm, and Mini-ITX boards measuring 17x17cm. This dual compatibility allows you to choose between a slightly larger Micro ATX board or a compact ITX option. The UTLGAMENG Mini-ITX ARGB Case is designed exclusively for Mini-ITX motherboards. If you prefer the flexibility of using a Micro ATX board for additional expansion slots, the first model offers that choice. The second model restricts you to the smaller Mini-ITX format, which is ideal for minimal desktop footprints.
Fan Size and Quantity
Cooling configurations differ significantly between these two cases. The Micro ATX model comes pre-installed with a single 80mm PWM fan that features intelligent temperature control. The packaging notes that only one fan can be installed in this chassis. In contrast, the Mini-ITX ARGB Case includes two 120mm ARGB fans. These larger fans provide a greater surface area for airflow and include customizable lighting effects via a 5V 3-pin controller. For pure airflow capacity and visual customization, the Mini-ITX case with its dual 120mm fans holds an advantage over the single 80mm unit in the other model.
GPU Compatibility
Graphics card length limits vary based on storage configuration in the Micro ATX case. It supports a maximum GPU length of 220mm when a hard drive is installed on the front panel. If you do not install an HDD, the maximum length increases to 250mm. The Mini-ITX ARGB Case supports GPUs up to 225mm in length. If you plan to use a large graphics card without a front-mounted hard drive, the Micro ATX case allows for a slightly longer card at 250mm. However, if you use a front HDD, the Mini-ITX case offers a more consistent 225mm clearance without needing to remove storage components.
Side Panel Design
The side panel construction impacts both aesthetics and maintenance. The Micro ATX case includes two distinct side panels: a cold-pressed steel plate panel and a large magnetic mesh pad. The magnetic design allows for quick removal without tools. The Mini-ITX ARGB Case features a finely textured mesh front panel to reduce dust intake and enhance RGB visibility, but the data does not specify the material or type of the side panel. The Micro ATX case provides a clear advantage here by offering both a solid steel option for a clean look and a mesh option for airflow, all managed via a convenient magnetic attachment system.
Storage and Dimensions
Storage options and physical footprint differ between the models. The Mini-ITX case explicitly supports both 3.5-inch HDDs and 2.5-inch SSDs, providing versatile storage solutions within its compact dimensions of 6.3 x 10.43 x 13.9 inches. The Micro ATX case mentions HDD installation on the front panel, which affects GPU clearance, but does not detail SSD support or specific external dimensions. The Mini-ITX case offers clearer storage versatility for both drive types in a defined small form factor, making it a stronger choice if you need to house multiple storage devices in a tight space.
Which UTLGAMENG Case Fits Your Build
You need Micro ATX flexibility
This case supports both Micro ATX and Mini-ITX motherboards. You get a larger footprint for better component spacing. It includes one 80mm PWM fan for temperature-controlled airflow. The side panel offers steel and magnetic mesh options. This dual support helps you choose the right board size for your specific needs.
You want Mini-ITX and ARGB lighting
This model is designed strictly for Mini-ITX motherboards. It comes with two 120mm ARGB fans for enhanced cooling and visual customization. The textured mesh front panel improves airflow while showcasing the lights. Its compact dimensions save desktop space. You get dedicated RGB control for a personalized aesthetic in a smaller chassis.
You need maximum GPU clearance
If you do not install a front hard drive, this case allows graphics cards up to 250mm in length. The other model limits GPU length to 225mm regardless of storage configuration. This extra 25mm of space provides better compatibility with longer high-end graphics cards. It offers more room for larger components in the same general form factor.
The products compared
UTLGAMENG Micro ATX Case with 80mm Fan
Best for: Small builds with short GPUs
- Motherboard Support
- Micro ATX, ITX
- Case Type
- Micro ATX
- Side Panel
- Steel plate, magnetic mesh pad
- Included Fans
- 1x 80mm PWM
- Max GPU Length
- 220mm (with HDD), 250mm (without HDD)
View on Amazon: UTLGAMENG Micro ATX Case with 80mm Fan Affiliate link
This UTLGAMENG case supports Micro ATX and Mini-ITX motherboards. It includes one 80mm PWM fan for airflow. The design uses a steel plate and magnetic mesh side panel. You can install an ATX power supply. Graphics card length is limited to 250mm without a hard drive. The I/O panel offers USB 3.0 and audio ports. It suits small builds with modest component sizes.
Pros
- Supports Micro ATX and ITX motherboards
- Includes 80mm PWM intelligent temperature control fan
- Features magnetic mesh side panel for airflow
- Compatible with ATX power supplies
Cons
- Only one fan is included
- 80mm fan size limits airflow compared to 120mm options
- Graphics card length restricted to 250mm max
Good fit if
- You need a case for Micro ATX or ITX boards
- You plan to use a short graphics card under 250mm
- You want a budget-friendly option with basic airflow
Skip if
- You require high airflow with multiple large fans
- You have a long graphics card over 250mm
- You want to install more than one fan
Verdict: UTLGAMENG Micro ATX Case with 80mm Fan fits users with small motherboards and short GPUs who need basic cooling. It is not suitable for high-airflow builds.
UTLGAMENG Mini-ITX ARGB Case
Best for: Compact ATX PSU builds with ARGB fans
- Motherboard Support
- Mini-ITX
- Case Type
- Small Form Factor
- Included Fans
- 2x 120mm ARGB
- Max GPU Length
- 225mm
- Connectivity
- USB 3.0
View on Amazon: UTLGAMENG Mini-ITX ARGB Case Affiliate link
This Mini-ITX case supports ATX power supplies and GPUs up to 225mm long. It includes two 120mm ARGB fans with a 5V 3-pin controller for lighting effects. The textured mesh front aids airflow while limiting dust. You get USB 3.0 ports and audio jacks on the I/O panel. Its compact dimensions save desktop space. It suits small builds needing high compatibility.
Pros
- Supports ATX power supplies in a Mini-ITX chassis
- Includes 2x 120mm ARGB fans with controller
- Accepts GPUs up to 225mm in length
- Textured mesh front panel for airflow
- USB 3.0 port on I/O panel
Cons
- Maximum GPU length is 225mm
- Only supports Mini-ITX motherboards
- No mention of included storage drives
Good fit if
- You need ATX PSU support in a small case
- You want pre-installed ARGB lighting
- You have a GPU under 225mm long
Skip if
- You require Micro-ATX or ATX motherboard support
- Your GPU exceeds 225mm in length
- You need USB-C connectivity
Verdict: UTLGAMENG Mini-ITX Case fits users who want ATX PSU support and ARGB fans in a compact form factor. It is ideal for builds with GPUs under 225mm long.
Specifications side by side
| Spec | UTLGAMENG Micro ATX Case with 80mm Fan | UTLGAMENG Mini-ITX ARGB Case |
|---|---|---|
| Motherboard Support | Micro ATX, ITX | Mini-ITX |
| Case Type | Micro ATX | Small Form Factor |
| Side Panel | Steel plate, magnetic mesh pad | not stated |
| Included Fans | 1x 80mm PWM | 2x 120mm ARGB |
| Max GPU Length | 220mm (with HDD), 250mm (without HDD) | 225mm |
| Tower Size | not stated | Small Form Factor |
| Fan Size | 80mm | not stated |
| Lighting | not stated | ARGB |
| Connectivity | not stated | USB 3.0 |
| Color | Black | Black |
Frequently asked questions
Does the UTLGAMENG Micro ATX Case fit a Mini-ITX motherboard?
Yes, the UTLGAMENG Micro ATX Case with 80mm Fan supports Mini-ITX motherboards in addition to Micro-ATX boards. This dual compatibility allows you to use smaller boards if you prefer a tighter layout. It is a practical choice for builds that need flexibility in motherboard size while maintaining a compact footprint.
What is the maximum graphics card length for the Mini-ITX ARGB Case?
The UTLGAMENG Mini-ITX ARGB Case is ideal for builds with GPUs under 225mm long. You should verify your specific graphics card dimensions against this limit. This constraint ensures proper fitment within the small form factor chassis without obstructing airflow or preventing the side panel from closing.
Does the Mini-ITX case support standard ATX power supplies?
Yes, the UTLGAMENG Mini-ITX ARGB Case supports ATX power supplies. This is notable because many small form factor cases require smaller SFX power units. Having ATX PSU support gives you more options for power supply selection, allowing you to use common, readily available components in your compact build.
How does the cooling differ between the two cases?
The Micro ATX model relies on an 80mm fan for cooling, which provides basic airflow suitable for low-power builds. The Mini-ITX ARGB model features ARGB fans, which often imply active cooling solutions with lighting effects. The Micro ATX version is not suitable for high-airflow requirements, whereas the Mini-ITX option focuses on compact efficiency with visual customization.
Can I use the Micro ATX case for a high-performance gaming PC?
No, the UTLGAMENG Micro ATX Case with 80mm Fan is not suitable for high-airflow builds. It is designed for users with small motherboards and short GPUs who need basic cooling. If you plan to run high-end components that generate significant heat, this case may not provide adequate thermal performance for sustained performance.
What connectivity options are available on the Mini-ITX case?
The UTLGAMENG Mini-ITX ARGB Case includes USB 3.0 connectivity. This port allows for faster data transfer speeds compared to older USB standards. You can connect external storage devices or peripherals directly to the front panel for convenient access without needing to reach behind the computer tower.
Which case is better for a build with a short GPU?
The UTLGAMENG Micro ATX Case with 80mm Fan is best for small builds with short GPUs. Its compact design accommodates limited graphics card lengths effectively. If your GPU is under the length limits of the Mini-ITX case, this Micro ATX option offers a straightforward fit for basic cooling needs without unnecessary complexity.