SilverStone Micro-ATX Small Form Factor vs SilverStone Slim Mini-ITX Case Handle (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the silverstone tek micro atx vs technology mini itx slim small cases to decide which small form factor build fits your needs. Both units are compact SilverStone designs intended for space-constrained setups. The main difference lies in their physical profile and motherboard compatibility. The Tek model offers a taller, standard SFF footprint that accepts Micro-ATX boards and full-sized power supplies. The Slim model is a low-profile chassis limited to Mini-ITX and SFX power supplies.
Key differences
| Aspect | SilverStone Micro-ATX Small Form Factor Case | SilverStone Slim Mini-ITX Case with Handle |
|---|---|---|
| Motherboard Support | Micro-ATX, Mini-DTX, Mini-ITX | Mini-ITX |
| Power Supply | ATX PSU | SFX PSU |
| Max GPU Length | Any length | 13 inches |
| Height | 13 inches | 3.43 inches |
| Weight | 13.5 pounds | 7.72 pounds |
| Handle | Not listed | Removable carrying handle |
Which one should you choose?
Choose SilverStone Micro-ATX Small Form Factor Case if
- You need to install a Micro-ATX motherboard or a standard ATX power supply.
- You plan to use a graphics card that exceeds 13 inches in length.
- You prioritize maximum internal volume for cooling and storage over a low profile.
Choose SilverStone Slim Mini-ITX Case with Handle if
- You require the lowest possible case height to fit in tight spaces.
- You want a lightweight chassis that includes a removable handle for transport.
- You are building a Mini-ITX system with an SFX power supply.
Verdict: The SilverStone Tek case suits builders who need more room for standard components and larger graphics cards. The Slim Mini-ITX case is the better choice for ultra-compact builds where height and portability are the primary constraints.
SFF Case Specs Compared
motherboard support
The SilverStone Micro-ATX Small Form Factor Case supports Micro-ATX, Mini-DTX, and Mini-ITX motherboards. This gives you flexibility to use larger boards if your project grows. The SilverStone Slim Mini-ITX Case Handle only accepts Mini-ITX boards. This limits your component choices to the smallest standard size. If you need more room for RAM or expansion slots, the first option is better. The second is strictly for the tiniest builds. Choose based on your motherboard size needs.
gpu length
Graphics card compatibility differs significantly between these two cases. The Micro-ATX model supports graphics cards of any length. You can install full-size or long cards without worrying about clearance issues. The Slim Mini-ITX Case limits you to cards up to 13 inches. This restricts you to low-profile or short cards. If you plan to use a powerful discrete GPU, the first case is the only viable choice. The second is for integrated graphics or minimal cards.
physical profile
The physical dimensions define how each case fits in your space. The Micro-ATX case stands 13 inches tall and 19 inches long. It occupies more vertical and horizontal space. The Slim Mini-ITX Case is only 3.43 inches high. It is much flatter and easier to slide under desks or into tight shelves. The handle model is designed for portability and low profiles. If space is tight vertically, the slim case wins. Otherwise, the taller case offers more volume.
weight
Weight affects how easy the case is to move. The Micro-ATX case weighs 13.5 pounds. This is substantial for a small chassis. The Slim Mini-ITX Case with Handle weighs 7.72 pounds. It is significantly lighter. The included handle makes it even easier to carry. If you move your PC often, the lighter weight of the second option is a clear advantage. The heavier case is more stable when stationary but harder to transport.
cpu cooling
Cooling options vary due to internal volume. The Micro-ATX case allows for CPU coolers up to 82mm in height. This supports many standard air coolers. The Slim Mini-ITX Case data does not list specific cooler height limits. However, its slim profile generally restricts cooling to low-profile or small blower-style coolers. The first case gives you more freedom for effective cooling. The second requires careful selection of small coolers. Check your cooler dimensions against the case limits.
Which case fits your build
You need Micro-ATX flexibility
This case supports Micro-ATX and Mini-DTX boards, giving you room to upgrade later. You can install graphics cards of any length and use standard ATX power supplies. The internal height allows for CPU coolers up to 82mm tall. It is the better choice if you want a larger footprint for greater component compatibility.
You want a portable Mini-ITX setup
This slim case features a removable handle for easy transport. It weighs only 7.72 pounds and fits Mini-ITX motherboards with SFX power supplies. You can orient it horizontally or vertically to fit tight spaces. It supports graphics cards up to 13 inches long, making it ideal for compact, mobile builds.
You prioritize compact size and weight
The slim profile measures just 3.43 inches in height, allowing it to fit in tight spaces. It is significantly lighter than the Micro-ATX option at 7.72 pounds. The tool-less drive cage simplifies assembly. If you need a lightweight, ultra-slim chassis for Mini-ITX components, this model offers the most efficient footprint.
The products compared
SilverStone Micro-ATX Small Form Factor Case
Best for: Micro-ATX builds needing long GPUs
- Motherboard Support
- Micro-ATX, Mini-DTX, Mini-ITX
- Case Type
- SFF
- Max GPU Length
- Any length
- Tower Size
- Small Form Factor
- Dimensions
- 19 × 15 × 13 inches
- Weight
- 13.5 pounds
View on Amazon: SilverStone Micro-ATX Small Form Factor Case Affiliate link
The SilverStone SG11B is a small form factor case supporting Micro-ATX, Mini-DTX, and Mini-ITX motherboards. It accepts ATX power supplies and accommodates graphics cards of any length. You get 82mm of CPU cooler height and ample room for 2.5-inch drives. This chassis offers a modern layout for compact builds. It measures 19 by 15 by 13 inches and weighs 13.5 pounds.
Pros
- Supports Micro-ATX, Mini-DTX, and Mini-ITX motherboards
- Accepts graphics cards of any length
- Includes space for ATX power supplies
- Provides 82mm clearance for CPU coolers
Cons
- Heavier than Mini-ITX alternatives at 13.5 pounds
- Larger footprint than Slim Mini-ITX cases
- Limited to 82mm CPU cooler height
Good fit if
- You need Micro-ATX motherboard support
- You require an ATX power supply
- You want to install long graphics cards
Skip if
- You prefer Mini-ITX form factors
- You need a lighter case under 10 pounds
- You require more than 82mm cooler height
Verdict: SilverStone SG11B Micro-ATX SFF Case fits builders who need Micro-ATX support and long GPU clearance. It suits those prioritizing component compatibility over minimal size.
SilverStone Slim Mini-ITX Case with Handle
Best for: portable Mini-ITX builds
- Motherboard Support
- Mini-ITX
- Case Type
- Slim Small Form Factor
- Max GPU Length
- 13 inches
- Dimensions
- 14.6 × 15 × 3.43 inches
- Weight
- 7.72 pounds
View on Amazon: SilverStone Slim Mini-ITX Case with Handle Affiliate link
This SilverStone case is a slim small form factor build designed for Mini-ITX motherboards. It measures 3.43 inches in height and supports graphics cards up to 13 inches long. The model includes a removable carrying handle for portability. You can mount it horizontally or vertically to fit various environments. It is ideal for users who need a compact, transportable PC.
Pros
- Supports Mini-ITX motherboards
- Accepts GPUs up to 13 inches
- Includes removable carrying handle
- Allows horizontal or vertical mounting
Cons
- Slim 3.43-inch height limits component choices
- Only supports Mini-ITX board size
- 7.72-pound weight adds to portability effort
Good fit if
- You need a portable Mini-ITX build
- You want a slim profile for tight spaces
- You plan to carry the case occasionally
Skip if
- You require Micro-ATX or ATX support
- You need to install long graphics cards
- You prefer a standard tower form factor
Verdict: SilverStone ML08B-H Mini-ITX Slim Case is a specialized enclosure for users who prioritize portability and a low profile over expansion space. It suits those who need to move a compact Mini-ITX system without sacrificing basic GPU compatibility.
Specifications side by side
| Spec | SilverStone Micro-ATX Small Form Factor Case | SilverStone Slim Mini-ITX Case with Handle |
|---|---|---|
| Motherboard Support | Micro-ATX, Mini-DTX, Mini-ITX | Mini-ITX |
| Case Type | SFF | Slim Small Form Factor |
| Max GPU Length | Any length | 13 inches |
| Tower Size | Small Form Factor | Small Form Factor |
| Dimensions | 19 × 15 × 13 inches | 14.6 × 15 × 3.43 inches |
| Weight | 13.5 pounds | 7.72 pounds |
| Color | Black (SG11) | ML08B-H |
| Model | SG11B | ML08B-H |
Frequently asked questions
Which case is smaller and lighter?
The SilverStone Slim Mini-ITX Case Handle is the more compact option. It measures 15 inches wide, 3.43 inches high, and 14.6 inches long. It also weighs only 7.72 pounds. In contrast, the Micro-ATX model is taller at 13 inches and weighs 13.5 pounds. You should choose the Slim model if portability and a low profile are your top priorities for your build.
Can I use a Micro-ATX motherboard in the Slim case?
No, you cannot. The SilverStone Slim Mini-ITX Case Handle is designed exclusively for Mini-ITX motherboards. If you plan to use a Micro-ATX board, you must select the SilverStone Micro-ATX Small Form Factor Case. This larger enclosure supports Micro-ATX, Mini-DTX, and Mini-ITX boards, giving you the flexibility to use larger form factors.
Does the Slim case have a handle for carrying?
Yes, the second model includes a handle. It is specifically marketed as the SilverStone Slim Mini-ITX Case Handle. This feature supports its role as a portable build solution. You can easily transport your compact Mini-ITX system. The Micro-ATX model does not list a handle in its specifications, making it less suitable for frequent moving.
Which case is better for long graphics cards?
The Micro-ATX case is better for long GPUs. Its verdict notes it fits builders needing long GPU clearance. The Slim case is a low-profile unit, which typically restricts the length of installed components. If you require a large, high-end graphics card, the Micro-ATX Small Form Factor Case provides the necessary internal space and compatibility.
What are the exact dimensions of the Micro-ATX case?
The SilverStone Micro-ATX Small Form Factor Case measures 15 inches in width, 13 inches in height, and 19 inches in length. It weighs 13.5 pounds. These dimensions make it a Small Form Factor tower that is taller than the Slim alternative. You should verify your desk or shelf space can accommodate this vertical height.
Is the Slim case suitable for a stationary desktop setup?
It is suitable, but it is specialized for portability. The Slim Mini-ITX Case Handle prioritizes a low profile and ease of movement over expansion space. While it works as a desktop, its 3.43-inch height limits component choices. If you do not need to move the PC often, the Micro-ATX case offers more room for upgrades and standard parts.
What is the model number for the black Micro-ATX case?
The model number is SG11B. It is available in Black. This specific model supports Micro-ATX motherboards and is designed for builders who need component compatibility over minimal size. The Slim case uses the model number ML08B-H. Always check the model number to ensure you are purchasing the correct version for your motherboard size.