SGPC 8.3L Portable Mini-ITX Case Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This sgpc k49bl 8 3l mini itx review covers a compact SFF chassis designed for portability and efficiency. Measuring just 8.3 liters, it fits easily into backpacks thanks to its included handles. The case supports standard Mini-ITX motherboards and SFX power supplies, keeping your build small. You get a choice of steel or ventilated acrylic side panels. It also accommodates GPUs up to 300mm long. This listing details the specs that matter for small form factor builders who need a lightweight, efficient case without excess bulk.
What stands out
- 8.3L volume with dual carrying handles for easy transport
- Supports Mini-ITX motherboards up to 170x170mm
- Accepts SFX PSUs, but not SFX-L models
- Includes an extra 3mm acrylic ventilated side panel
- Handles GPUs up to 300mm in length
Who it fits
Good fit for
This case suits portable builds and users with limited desk space. If you need a chassis that fits in a backpack, the handles and 8.3L size help. It works well with SFX power supplies and short GPUs. The ventilated acrylic panel aids cooling without extra fans. You should buy this if you want a small, sturdy steel case that prioritizes mobility and basic SFF compatibility over high-end expansion.
Who should skip it
Skip this case if you use SFX-L power supplies, as they are not compatible. You also need to buy the 18.5cm riser cable separately, which adds to your setup time and cost. If you need multiple storage drives, this unit only holds one 2.5-inch drive. Avoid it if you plan to use large air coolers taller than 69mm. It is not for users who want pre-installed cables or extensive PCIe expansion options.
Verdict: The SGPC K49BL is a practical, lightweight option for portable Mini-ITX builds. It offers solid SFF compatibility and cooling potential for its small size.
Key specs explained
Case Volume: 8.3L
This small volume means the chassis is highly compact. You can easily fit it into a backpack using the included handles. This size is ideal for users who travel or need a small footprint. It is much smaller than standard mid-tower cases, which often exceed 40 liters. The compact design saves desk space while still housing essential components.
Motherboard Support: Mini-ITX
This case only accepts Mini-ITX motherboards. These boards are square and measure up to 170x170mm. You cannot install larger ATX or Micro-ATX boards. This restriction limits component choices but allows for a smaller build. You must select a motherboard that fits this specific standard to ensure compatibility with the chassis layout.
Max GPU Length: 300mm
You can install graphics cards up to 300mm long. This limit excludes many high-end, triple-fan cards that often exceed 320mm. You must check your specific GPU dimensions before buying. This length is sufficient for most mid-range cards. It ensures the card fits without blocking other ports or components inside the small case.
Side Panel: SPCC Steel, Acrylic
The case includes steel panels for strength and an acrylic panel for visibility. The acrylic side is ventilated, which helps airflow. You can choose between durability and seeing your components. The steel provides structural rigidity, while the acrylic adds a modern look. This combination offers both protection and aesthetic flexibility for your build.
Design and build quality
The SGPC K49BL chassis measures 151 by 306 by 179 mm. It holds 8.3 liters of volume, making it a compact small form factor build. The listing states it weighs 7.28 pounds. You can move it easily using the two included handles. One handle is plastic, and the other is PU leather. This design allows you to fit the case into a standard backpack for travel.
The body uses 1.5mm SPCC steel for durability. It features an upgraded surface painting process compared to previous models. You get two SPCC side panels and an extra 3mm acrylic ventilated panel. The steel provides structural strength, while the acrylic adds airflow options. The finish is black for a standard look. This material choice supports a portable yet sturdy build.
Front I/O includes one USB port and one Type-C port. The USB connects to a 19-pin motherboard header, and the Type-C uses a Type-E header. These ports allow for fast data transfer and device charging. The layout keeps controls accessible without taking up extra space. This setup suits users who need quick access to peripherals. The design prioritizes portability and efficient component integration within a tight footprint.
Setup and daily use guide
Setting up this chassis requires careful component selection. You must use a standard Mini-ITX motherboard measuring up to 170 by 170 mm. The power supply must be an SFX unit, with a maximum size of 125 by 100 by 64 mm. SFX-L models are not compatible. You also need a graphics card no longer than 300 mm and no taller than 60 mm. The GPU shoulder height is limited to 27 mm. You must purchase an 18.5 cm dual reverse connector riser cable separately, as it is not included. This cable is essential for connecting the GPU in this vertical orientation. For cooling, you can install a CPU air cooler up to 69 mm in height. The case includes a highly ventilated 3 mm acrylic side panel. This design allows for effective airflow even if you do not install additional case fans. You can add one 2.5-inch SSD or HDD for storage. Daily use involves connecting peripherals to the front panel. It features a USB port linked to the motherboard’s 19-pin header and a Type-C port connected to the Type-E header. These ports support high-speed data transfer and charging. The two included handles, one plastic and one PU leather, allow you to move the unit easily. You can fit the 8.3-liter chassis into a backpack for transport. The build uses 1.5 mm SPCC steel, providing a sturdy frame for your components.
Check compatibility and accessories
Before you finalize your purchase, verify your component compatibility carefully. This chassis only accepts standard Mini-ITX motherboards up to 170 by 170 mm. You must also use an SFX power supply, as SFX-L units do not fit. GPU selection is critical. The case supports cards up to 300 mm in length, but the shoulder height is strictly limited to 27 mm. You will need to buy an 18.5 cm dual reverse connector riser cable separately, as it is not included. Ensure your CPU air cooler is under 69 mm in height to fit. Storage is limited to a single 2.5-inch drive. Keep the ventilated acrylic panel clean to maintain airflow. This option suits users prioritizing portability and compactness over high-end GPU support. It fits well alongside other small form factor choices if you value easy transport.
Check before you buy
- Confirm your GPU fits within 300mm length and 27mm height limits.
- Buy an 18.5cm dual reverse connector riser cable separately.
- Ensure your CPU cooler is under 69mm in height.
- Verify your power supply is standard SFX, not SFX-L.
The product at a glance
SGPC 8.3L Portable Mini-ITX Case
Best for: Portable Mini-ITX builds with acrylic panels
- Motherboard Support
- Mini-ITX
- Case Type
- SFF
- Side Panel
- SPCC Steel, Acrylic
- Max GPU Length
- 300mm
- Case Volume
- 8.3 L
- Tower Size
- Small Form Factor
View on Amazon: SGPC 8.3L Portable Mini-ITX Case Affiliate link
The SGPC K49BL is an 8.3L portable Mini-ITX chassis built from 1.5mm SPCC steel. It includes a ventilated 3mm acrylic side panel for passive cooling support. The case features two carrying handles and front USB Type-C and USB ports. It fits GPUs up to 300mm long and supports SFX power supplies. You get a compact build with strong structural integrity and easy transport options.
Pros
- Includes two carrying handles for portability
- Supports GPUs up to 300mm in length
- Features a ventilated 3mm acrylic side panel
- Front USB Type-C and USB ports available
Cons
- Requires purchasing a separate 18.5cm riser cable
- SFX-L power supplies are not compatible
- Limited to one 2.5-inch storage drive
Good fit if
- You need a portable Mini-ITX build
- You want to use a ventilated acrylic side panel
- You have an SFX power supply
Skip if
- You already own a riser cable
- You require SFX-L power supply support
- You need multiple storage bays
Verdict: SGPC K49BL 8.3L Mini-ITX Case is a sturdy, portable option for users who prioritize transportability and acrylic visibility. It suits builders who already have the necessary riser cable and SFX PSU.
Specifications side by side
| Spec | SGPC 8.3L Portable Mini-ITX Case |
|---|---|
| Motherboard Support | Mini-ITX |
| Case Type | SFF |
| Side Panel | SPCC Steel, Acrylic |
| Max GPU Length | 300mm |
| Case Volume | 8.3 L |
| Tower Size | Small Form Factor |
| Use | Gaming |
| Compatible Device | CPU Cooler |
| Dimensions | 12 × 5.94 × 7.05 inches |
| Weight | 7.28 pounds |
| Size | 8.3L |
| Color | black |
| Model | K49BL&No Riser Cable |
Frequently asked questions
What motherboard size does the SGPC K49BL support?
This case supports standard Mini-ITX motherboards. The maximum dimensions for the board are 170 by 170 mm. You cannot fit larger ATX or Micro-ATX boards in this chassis. Ensure your selected motherboard adheres to these specific size constraints for proper installation.
Does the SGPC case come with a riser cable?
No, the listed model does not include a riser cable. The specific product title indicates it is sold without one. You will need to purchase a compatible Mini-ITX riser cable separately. This is necessary for connecting the graphics card in this compact configuration.
What type of power supply fits in this case?
The chassis requires an SFX power supply unit. SFX-L units will not fit inside the designated space. You must verify that your chosen power supply matches the standard SFX form factor. This ensures the PSU fits correctly within the 8.3-liter volume.
How heavy is the SGPC K49BL case?
The case weighs 7.28 pounds. This weight reflects the build materials used for the chassis structure. It is designed to be portable, especially when combined with the included carrying handles. You can transport it easily despite the solid construction.
What are the exact dimensions of the SGPC case?
The dimensions are 12 inches in length, 5.94 inches in width, and 7.05 inches in height. These measurements result in the stated 8.3-liter volume. The compact footprint allows it to fit into standard backpacks for travel or small desk setups.
Is the SGPC case suitable for gaming?
It is suitable for small form factor builds, including gaming rigs. However, you must carefully select components that fit within the size limits. Graphics card length and CPU cooler height are critical factors. The acrylic panels provide visibility for your hardware during use.
Can I use this case for a portable PC setup?
Yes, it is designed for portability. The 8.3-liter volume and included handles make it easy to carry. You can fit it into a backpack for travel. Just ensure all internal components are securely mounted to prevent damage during transport.