Semetall 2-Pack GPU Fan Mounting Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This semetall 2pcs computer case graphics review covers the Semetall 2-Pack GPU Fan Mounting Brackets. These black metal supports are designed to stabilize heavy graphics cards while improving airflow. Each bracket measures 8.27 inches in length and 1.97 inches in width, with a thin 1.5mm profile. The set includes two brackets, six mounting screws, and eight fan fixing screws. You can attach 80mm, 90mm, 120mm, or 140mm fans to the side. This configuration helps direct air across the card, reducing heat buildup and enhancing system stability for compatible setups.
What stands out
- Supports multiple fan sizes including 80mm, 90mm, 120mm, and 140mm
- Compact dimensions of 8.27 x 1.97 inches for tight fits
- Includes six screws and eight fan fixing screws for installation
- Side-blown design improves local heat dissipation
- Black finish matches most modern PC builds
Who it fits
Good fit for
You should consider these brackets if you own a heavy graphics card that sags or if your case lacks adequate side airflow. The ability to mount various fan sizes, from 80mm to 140mm, makes them versatile for different chassis layouts. Users with basic computer knowledge and installation skills will find the included hardware sufficient for setup. They are ideal for builders who want to improve thermal performance without replacing their entire cooling solution.
Who should skip it
You should look elsewhere if you lack confidence in handling small screws and precise mounting. The product note explicitly states that users require high computer knowledge and installation operation ability. If you are a beginner, the risk of improper installation is higher. Additionally, if you prefer plug-and-play solutions without manual fan mounting, these passive brackets will not suit your needs. They are purely mechanical supports requiring additional fan purchases.
Verdict: These brackets offer a practical, spec-driven way to stabilize GPUs and improve airflow. They suit experienced builders who need versatile fan mounting options.
Key specs explained
Size: 2pcs
The package includes two brackets, allowing you to support a single graphics card with dual mounting points. This setup provides better stability for heavy cards than a single bracket. You get enough hardware to secure the card firmly without sagging. It is a standard quantity for this type of accessory. Check if your card needs one or two points of support before buying.
Length: 8.27 inches
This length determines how far the bracket extends from the graphics card. It must fit within your case's internal space. Longer brackets may reach further into the case, potentially interfering with other components. Measure your case clearance before installation. This dimension ensures the bracket covers the necessary area of the card for proper support and airflow management.
Width: 1.97 inches
The narrow width allows the bracket to fit between the graphics card and the case wall. It minimizes obstruction of airflow paths. A slim profile helps prevent the bracket from touching nearby components like RAM or VRMs. This dimension is critical for ensuring the bracket does not cause physical interference inside a crowded PC case.
Thickness: 1.5mm
This metal thickness provides rigidity without adding excessive weight. It is thin enough to avoid significant heat retention but strong enough to hold the card. Compare this to thicker supports which may add bulk. The 1.5mm gauge offers a balance of strength and minimal intrusion into your case's internal environment.
Design and build quality
According to the listing, these brackets are made of metal with a black finish. The material choice suggests durability for supporting heavy graphics cards. Each bracket measures 8.27 inches in length and 1.97 inches in width. The thickness is specified as 1.5mm, which provides a slim profile that fits into tight chassis spaces without obstructing other components. The total weight for the two-pack is 3.53 ounces, keeping the added mass minimal.
The layout is designed for versatility. You can install two 80mm fans, two 90mm fans, or even two 120mm or 140mm fans on each bracket. This flexibility allows you to match the airflow needs of your specific graphics card and case configuration. The side-blowing design aims to improve air ducts within the chassis, strengthening local heat dissipation. This approach helps solve overheating issues while potentially extending hardware life.
The package includes the two brackets, six screws, and eight fan-fixing screws. This hardware set provides everything needed for initial installation. However, the listing notes that users should have high computer knowledge and installation operation ability. This implies the mounting process requires precision and understanding of your system’s internal layout. The design prioritizes functional stability and airflow enhancement over aesthetic customization, making it a practical tool for serious builders.
Setup and everyday use
Installing these brackets requires a solid understanding of PC hardware. The listing explicitly notes that users need high computer knowledge and installation operation ability. You are not simply snapping a plastic clip into place. You must handle the provided hardware with care. The package includes two side-blown cooling brackets, six screws for the main structure, and eight fan fixing screws. You will need to align the bracket with your graphics card’s mounting holes. The bracket is designed to hold two fans simultaneously. You can choose from 80mm, 90mm, 120mm, or 140mm fans. This flexibility lets you match your existing case airflow setup. The side-blowing design directs air along the length of the card. This improves the chassis air duct and strengthens local heat dissipation. You are not just preventing sag. You are actively managing thermal output. The 1.5mm thickness provides a rigid base. This rigidity helps maintain the bracket’s position under the weight of the GPU. In daily use, the bracket remains static. It does not move or vibrate. Its primary role is structural support and airflow management. The black finish blends with most internal components. You do not need to adjust the bracket after installation. It sits fixed in place. The eight fan screws allow you to secure your chosen fans to the bracket. This creates a stable cooling module attached to your graphics card. The system stability improves because the card is supported and cooled. This setup extends the life of your hardware by reducing thermal stress. You benefit from a more consistent operating temperature for your GPU.
Check compatibility and fans
Before you buy, verify your graphics card dimensions. The listing states these brackets support 80mm, 90mm, 120mm, or 140mm fans. You must confirm your specific card has enough clearance for these fan sizes. The brackets measure 8.27 inches long. This length may not fit all chassis designs. Check your case interior space carefully. You need to own the fans yourself. The package includes six screws for mounting and eight for the fans. You must provide the fans separately. Installation requires high computer knowledge. You should understand airflow dynamics and hardware stability. These brackets improve local heat dissipation and system stability. They extend hardware life by reducing thermal stress. Consider these alongside other case fans and cooling solutions. They are a specialized add-on. They do not replace your primary cooling system. They stabilize and assist. Ensure your PC build can handle the additional airflow requirements. This product suits users who want precise control over their GPU cooling environment.
Check before you buy
- Verify your graphics card fits the 8.27-inch length.
- Confirm you own compatible 80mm to 140mm fans.
- Ensure your case has space for side-blown airflow.
- Check if you have the required installation skills.
The product at a glance
Semetall 2-Pack GPU Fan Mounting Brackets
Best for: Experienced builders adding dedicated GPU side airflow
- Fan Size
- 140mm, 80mm
- Compatible Device
- Graphics Card
- Dimensions
- 8.27 × 1.97 × 1.97 inches
- Weight
- 3.53 ounces
View on Amazon: Semetall 2-Pack GPU Fan Mounting Brackets Affiliate link
This two-pack contains metal brackets designed to mount auxiliary cooling fans alongside your graphics card. Each unit measures 8.3 by 1.97 inches with a 1.5 mm thickness, weighing 3.53 ounces. The brackets accommodate two 80 mm, two 90 mm, 120 mm, or 140 mm fans to direct airflow across your chassis. It suits experienced builders needing targeted expansion cooling.
Pros
- Supports dual 80 mm, dual 90 mm, 120 mm, or 140 mm fan setups
- Includes two brackets, six chassis screws, and eight fan fixing screws
- Slim 1.5 mm thickness keeps overall bracket height at 1.97 inches
Cons
- Requires high computer knowledge and advanced installation ability
- Fixed 8.3-inch length limits mounting options inside compact enclosures
Good fit if
- You need auxiliary side-blowing airflow directed at your graphics card.
- You plan to mount 80 mm, 90 mm, 120 mm, or 140 mm fans.
Skip if
- You lack the technical installation ability required for custom hardware mounting.
- You use a compact chassis that cannot fit an 8.3-inch bracket.
Verdict: Semetall 2-Pack Graphics Card Cooling Bracket provides dedicated mounting hardware for PC builders seeking supplemental GPU side ventilation.
Specifications side by side
| Spec | Semetall 2-Pack GPU Fan Mounting Brackets |
|---|---|
| Fan Size | 140mm, 80mm |
| Compatible Device | Graphics Card |
| Dimensions | 8.27 × 1.97 × 1.97 inches |
| Weight | 3.53 ounces |
| Size | 2pcs |
| Color | Black |
| Model | LW1992 |
Frequently asked questions
What are the exact dimensions of the Semetall GPU brackets?
Each bracket measures 8.27 inches in length, 1.97 inches in width, and 1.97 inches in height. The total package weighs 3.53 ounces. These compact dimensions allow them to fit within standard PC case layouts without taking up excessive internal space. You can verify that the length accommodates your specific graphics card model before installation.
Which fan sizes do these mounting brackets support?
The listing states that these brackets support 80mm, 90mm, 120mm, and 140mm fans. This flexibility allows you to choose the airflow volume that best matches your cooling needs. Ensure your graphics card has sufficient clearance for the chosen fan size to avoid physical interference with surrounding components or the case walls.
Are these brackets suitable for beginners?
No, the listing explicitly notes that users need high computer knowledge and installation operation ability. These are not plug-and-play clips for novices. You must handle the hardware with care and understand PC assembly. If you are unfamiliar with installing GPU supports or managing internal cabling, this product may not be the right choice for your build.
What material are the Semetall GPU mounts made from?
The brackets are constructed from metal with a black finish. This material choice suggests durability and stability for supporting heavy graphics cards. The metal construction helps prevent sagging over time. The black color helps them blend into most PC cases, maintaining a clean aesthetic inside your computer chassis.
How many brackets come in the package?
The package includes two brackets. This allows you to support a single graphics card with dual mounting points. Using two brackets provides better stability for heavy cards than a single bracket. This setup secures the card firmly at multiple points, reducing the risk of sagging or strain on the PCIe slot.
What is the model number for these GPU fans?
The model number for these brackets is LW1992. This identifier helps you locate the correct product on retail sites or verify compatibility with other hardware. The product is branded as Semetall and is designed specifically for DIY builders adding side-blown GPU cooling to their existing systems.