6 Best Alternatives to the Maxmoral Triple 80mm PCI Fan (2026)

How alternatives compare to Maxmoral

Maxmoral Dual Fan PCI Slot Mount Rack

The Maxmoral Dual Fan Mount Rack replaces the triple-fan setup with a dual-fan configuration. It holds two 80mm fans instead of three, reducing the total cooling surface area. This bracket is lighter at 3.53 ounces compared to the original’s 0.32 ounces, though the weight difference seems inverted in the data. It fits the same PCI slot width but sacrifices one fan position. You should choose this if you need less airflow volume or have space constraints that prevent installing three fans. It maintains the same metal construction and simple design philosophy, making it a straightforward swap for users who do not need the extra fan.

RIIEYOCA Multi-Size Dual Fan Radiator Bracket

The RIIEYOCA Multi-Size Dual Fan Bracket supports a wider range of fan sizes, from 80mm to 140mm. Unlike the original, which is fixed for 8cm and 9cm fans, this option allows you to use larger 120mm or 140mm fans in a single PCI slot. It holds two fans rather than three, so the total airflow potential depends on the fan size you select. This bracket is ideal for vertical GPU setups where space is limited but larger fans are preferred for efficiency. You gain flexibility in fan choice but lose the ability to mount three small fans simultaneously. It is a better fit if you want to upgrade to larger fans without changing your case layout.

DORHEA 80mm 2-Pin DC Fans (2-Pack)

The DORHEA 80mm 2-Pin DC Fans are individual fans rather than a mounting bracket. They connect directly to a 12V power source via a 2-pin connector, bypassing motherboard headers. The original Maxmoral bracket requires you to source fans separately, while this product provides the fans themselves. You get raw airflow without the need for a bracket or complex wiring. However, you lose the organized mounting solution and the ability to secure fans in a PCI slot. This option is best for older PCs or custom builds where you need direct 12V power and do not require a structured mounting rack. It is a utilitarian choice for direct replacement scenarios.

E-outstanding Dual 120mm/140mm PCI Fan Bracket

The E-outstanding Dual Fan Bracket mounts two 12cm or 14cm fans in a single PCI slot. It replaces the three 80mm fans with two larger fans, offering higher static pressure and airflow per fan. The bracket is black and weighs 0.32 ounces, matching the original’s weight but differing in capacity. You gain the ability to use standard case fans, which are often quieter and more efficient than 80mm fans. However, you sacrifice the triple-fan density for larger fan size. This option is suitable if you prefer larger fans for better performance or noise levels. It is a practical upgrade for builders who want to modernize their cooling setup with standard 120mm or 140mm fans.

Maxmoral Four Fan Mounting Rack 2-Pack

The Maxmoral Four Fan Mounting Rack 2-Pack provides a solution for larger 12cm and 14cm fans. It comes in a two-pack, offering more mounting hardware than the single original bracket. This option is designed for devices like routers or consoles, not just graphics cards. You gain the ability to mount multiple larger fans, which can provide significant cooling for various devices. However, it is not a direct PCI slot replacement for the original triple-fan bracket. It is best for users who need to cool multiple devices or require a more robust mounting solution. The weight is 3.53 ounces per pack, indicating a sturdy construction. It is a versatile choice for broader cooling needs beyond a single PCI slot.

Hilitand 80mm ARGB PWM Fan

The Hilitand 80mm ARGB PWM Fan is an individual fan with RGB lighting and PWM control. Unlike the original bracket, which is purely mechanical, this product includes aesthetic features and speed control. It connects via a 5V ARGB header and a PWM cable, requiring compatible motherboard headers. You gain customizable lighting and adjustable fan speeds, which the original bracket does not offer. However, you still need a separate mounting solution to install it in a PCI slot. This option is ideal for users who want visual appeal and precise fan control. It is a better fit for builds where aesthetics and performance tuning are priorities. You sacrifice the simplicity of the bracket for advanced fan features.

Quick picks

Our 7 picks

1 Best overall

Maxmoral Triple 80mm PCI Fan Mount Bracket

Best for: expanding airflow in one PCI slot

Fan Size

80mm

Compatible Device

Radiator, Graphics Card

Dimensions

0.98 × 3.15 × 0.98 inches

Weight

0.32 ounces

View on Amazon: Maxmoral Triple 80mm PCI Fan Mount Bracket Affiliate link

This Maxmoral bracket mounts three 80mm or 90mm fans into a single PCI slot. It includes one brace and four connectors for secure attachment. The metal construction features a black stoving varnish finish for rust resistance. It fits most graphics cards and radiators. You get a simple, durable solution for expanding case airflow without using multiple slots.

Pros

• Holds three 80mm or 90mm fans in one slot
• Includes four fan connectors for mounting
• Metal build with rust-resistant black finish
• Compatible with most graphics cards and radiators

Cons

• Requires DIY assembly with included screws
• Only supports 80mm and 90mm fan sizes
• No PWM or ARGB control features listed

Good fit if

• You need extra airflow in a single PCI slot
• You use 80mm or 90mm case fans
• You want a metal bracket for durability

Skip if

• You require 120mm or 140mm fan support
• You need plug-and-play installation without tools
• You want RGB lighting or fan speed control

Verdict: Maxmoral 3-Slot 80mm Fan Bracket offers a sturdy, space-saving way to add three fans to your build. It is ideal for builders who prioritize airflow expansion over smart features or larger fan compatibility.

2 Best budget

Maxmoral Dual Fan PCI Slot Mount Rack

Best for: adding dual fans to PCI slots

Fan Size

80mm

Compatible Device

Radiator, Graphics Card

Weight

3.53 ounces

View on Amazon: Maxmoral Dual Fan PCI Slot Mount Rack Affiliate link

This is a dual fan mounting rack designed for PCI slots. It supports 80mm, 90mm, 120mm, and 140mm fans. The bracket is made of metal with a black baked paint finish. It includes two brackets and necessary screws. You can use it to add cooling to graphics cards or radiators. It is a practical way to expand airflow options.

Pros

• Supports 80mm, 90mm, 120mm, and 140mm fans
• Metal construction with black baked paint
• Includes two brackets and mounting screws
• Designed for graphics card or radiator use

Cons

• Limited to dual fan configurations
• No RGB lighting included
• Basic metal design without aesthetic extras

Good fit if

• You need to add fans to a PCI slot
• You want a durable metal bracket
• You are using 80mm to 140mm fans

Skip if

• You need single fan mounting
• You want RGB lighting effects
• You prefer plastic brackets

Verdict: Maxmoral Dual Fan Mount Rack is a sturdy option for users who need to install dual fans in a PCI slot. It fits those who prioritize function over flashy designs.

3 Also great

RIIEYOCA Multi-Size Dual Fan Radiator Bracket

Best for: Adding cooling to vertical GPU setups

Fan Size

120mm, 140mm, 80mm

Compatible Device

Radiator, Graphics Card

View on Amazon: RIIEYOCA Multi-Size Dual Fan Radiator Bracket Affiliate link

The RIIEYOCA bracket holds two fans for GPU cooling. It supports 80mm, 90mm, 120mm, and 140mm sizes. The thickened metal body resists rust. It includes 16 screws for secure mounting. This design fits under a vertical video card stand. You get extra cooling without adding noise. It is a practical upgrade for DIY builds.

Pros

• Supports 80mm, 90mm, 120mm, and 140mm fans
• Thickened metal construction resists corrosion
• Includes 16 screws for stable installation
• Fits under vertical GPU stands

Cons

• Requires purchasing fans separately
• Limited to two fan mounts
• No RGB lighting included

Good fit if

• You need extra GPU cooling
• You use a vertical card stand
• You want a durable metal bracket

Skip if

• You want an all-in-one fan kit
• You need more than two fans
• You prefer plastic brackets

Verdict: RIIEYOCA Dual Fan Bracket 80-140mm is a sturdy metal holder for 80mm to 140mm fans. It fits users who want to add cooling to a vertical GPU setup.

4 Best 2-pin

DORHEA 80mm 2-Pin DC Fans (2-Pack)

Best for: Direct 12V replacement in older PCs

Fan Size

80mm

Max Fan Speed

4500RPM

Max Airflow

41CFM

Noise Level

37.9dBA

Connector Type

2pin-ph2.5

Compatible Device

Radiator, CPU Cooler

View on Amazon: DORHEA 80mm 2-Pin DC Fans (2-Pack) Affiliate link

This DORHEA unit is a pair of 80mm by 25mm fans designed for basic cooling tasks. It runs on 12V DC with a 2-pin connector. The motors spin at 4500 RPM, moving 41 CFM of air. You get 37.9 dBA of noise at full speed. The red and black wires connect directly to power. It fits CPU coolers or radiators. This is a simple solution for older systems needing direct voltage.

Pros

• 80mm x 25mm dimensions fit standard slots
• 2-pin connector for direct 12V power
• 4500 RPM speed for 41 CFM airflow
• 37.9 dBA noise level at max speed

Cons

• No PWM or speed control headers
• 37.9 dBA is loud for quiet builds
• Fixed speed cannot be adjusted via software

Good fit if

• You need a direct 12V replacement fan
• You are cooling a specific component like a CPU cooler
• You have available 2-pin power connectors

Skip if

• You require silent operation under 30 dBA
• You need variable speed control via motherboard
• You want RGB lighting or aesthetic features

Verdict: DORHEA 80mm 2-Pin 12V Fan is a utilitarian option for users who need raw airflow from a direct 12V source. It suits builders who prioritize function over noise reduction or smart control.

5 Also great

E-outstanding Dual 120mm/140mm PCI Fan Bracket

Best for: Dual 12cm or 14mm fan mounting

Compatible Device

Radiator, Graphics Card

Weight

0.32 ounces

View on Amazon: E-outstanding Dual 120mm/140mm PCI Fan Bracket Affiliate link

This bracket holds two 12cm or 14cm fans in a single PCI slot. The metal construction features a black painted surface for rust and corrosion resistance. It includes fixed screw fasteners for secure installation. You get one bracket and two fan connectors. This setup improves system heat dissipation and reduces case noise for DIY builds.

Pros

• Holds two 12cm or 14cm fans
• Metal construction with black paint
• Includes fixed screw fasteners
• Reduces PC case noise

Cons

• Does not include the fans themselves
• Limited to dual fan capacity
• Basic manual installation only

Good fit if

• You need to mount two larger fans in one slot
• You want a durable metal bracket
• You are building a custom PC cooling setup

Skip if

• You need to mount three or more fans
• You prefer plastic brackets for lighter weight
• You want an all-in-one fan and bracket kit

Verdict: E-outstanding Dual Fan Mount Rack provides a sturdy metal solution for dual 12cm or 14cm fans. It suits builders who need extra cooling capacity in a single PCI slot without buying separate brackets.

6 Also great

Maxmoral Four Fan Mounting Rack 2-Pack

Best for: Cooling routers or consoles with 12cm/14cm fans

Compatible Device

Radiator, Graphics Card

Weight

3.53 ounces

View on Amazon: Maxmoral Four Fan Mounting Rack 2-Pack Affiliate link

This Maxmoral bracket holds two 12cm or 14cm fans for cooling routers, game consoles, or laptops. It uses durable metal with a black baked paint finish to resist rust. The package includes two frames and all necessary screws for installation. A built-in speed control feature lets you adjust fan performance. It is a practical solution for DIY cooling setups that need extra airflow in tight spaces.

Pros

• Supports 12cm and 14cm fan sizes
• Includes speed control for fan adjustment
• Metal construction with rust-resistant black paint
• Includes mounting screws and fasteners

Cons

• Only accommodates two fans, not three
• No mention of included fan hardware
• Limited to specific fan dimensions

Good fit if

• You need to cool a router or console
• You want to adjust fan speed manually
• You prefer durable metal mounting brackets

Skip if

• You require support for 80mm fans
• You need to mount three or more fans
• You want pre-installed fans included

Verdict: Maxmoral 2-Pack 12cm/14cm Fan Mount Rack offers a sturdy, adjustable cooling solution for larger fans. It fits users who need to cool devices like routers or laptops with customizable airflow.

7 Best premium

Hilitand 80mm ARGB PWM Fan

Best for: 80mm slots with 5V ARGB motherboards

Fan Size

80mm

Max Fan Speed

2500 RPM

Max Airflow

26.5 CFM

Noise Level

25.5 dBA

Bearing Type

MFDB Fluid Dynamic

Lighting Type

5V ARGB

View on Amazon: Hilitand 80mm ARGB PWM Fan Affiliate link

This Hilitand 80mm fan uses 5V ARGB lighting and PWM control for precise speed management. It reaches 2500 RPM with 26.5 CFM airflow while staying quiet at 25.5 dBA. The MFDB bearing supports over 10,000 hours of use. You get eight silicone pads to reduce vibration. It fits standard 72mm hole spacing for easy installation in most chassis or radiators.

Pros

• 5V ARGB lighting for synchronized RGB effects
• PWM control allows speeds from 800 to 2500 RPM
• MFDB bearing rated for over 10,000 hours
• Low noise output of 25.5 dBA at max speed
• Eight silicone pads absorb vibration for stability

Cons

• Requires a 5V ARGB motherboard header
• Standard 72mm screw spacing may not fit all brackets
• Single fan unit requires separate mounting hardware

Good fit if

• You need 5V ARGB lighting for your build
• You want quiet operation under 26 dBA
• You are installing fans in an 80mm slot

Skip if

• Your motherboard only supports 12V RGB
• You require a 120mm or larger fan size
• You need a pre-assembled bracket with fans

Verdict: Hilitand 80mm 5V ARGB PWM Fan is a quiet, high-speed option for users with 5V ARGB headers. It delivers strong airflow for radiators while minimizing noise and vibration.

Specifications side by side

Frequently asked questions

See also

• superun 3 in 1 walking alternatives
• wgzixezn 3 in 1 crawling alternatives