LRONG 10-Port PWM SATA Fan Alternatives: 6 Similar Picks Compared

How these alternatives compare

Kingwin 80mm Black Cooling Fan

The Kingwin 80mm fan replaces a hub with a single cooling unit. It measures 3.15 by 0.98 inches and weighs 2.43 ounces. You get direct airflow rather than port expansion. This model targets quiet operation in compact spaces. It lacks the ten-port capacity of the LRONG hub. You cannot connect multiple fans to this single unit. It fits users who need a small, durable fan for a specific spot. The black color matches most chassis interiors. It is a budget choice for simple cooling needs. You trade hub versatility for a dedicated, silent airflow source. This pick is best for builders who prioritize low noise over high fan counts.

GDSTIME 70mm 3-Pin Cooling Fan 2-Pack

The GDSTIME 70mm fan offers a smaller footprint than the LRONG hub. It measures 2.76 by 0.59 inches and weighs 1.29 ounces. It uses a 3-pin connector for direct motherboard control. You get two fans in this pack instead of a hub. This option suits tight spaces where a hub would be too large. It lacks PWM speed control, relying on DC voltage instead. You lose the ability to manage ten fans from one point. This pick is ideal for basic cooling where smart control is not required. The small size allows installation in areas with limited clearance. It is a practical solution for older systems or compact builds.

DS leddess 120mm 6-Pack RGB Fans

The DS leddess 120mm RGB fans provide visual appeal over port expansion. Each fan measures 4.72 by 0.98 inches. You get six fans in this pack with full RGB lighting. This model suits builders who want synchronized lighting across their case. It lacks the hub’s ability to add ten ports from one SATA connection. You trade hub convenience for aesthetic consistency and vibration dampening. The fans are designed for quiet operation with remote control. This pick is best for enthusiasts who prioritize looks over simple expansion. It fits users who have enough headers and want enhanced visuals. The ring design adds a modern touch to any build.

DORHEA 80mm 2-Pin DC Fans (2-Pack)

The DORHEA 80mm 2-pin fans target legacy systems instead of modern hubs. Each fan measures 3.15 by 0.98 inches. You get two fans with a 2-pin connector for direct power. This model suits builders with older motherboards lacking modern headers. It lacks PWM control and the ten-port capacity of the LRONG hub. You trade smart speed adjustment for high airflow from legacy connections. This pick is ideal for CPU cooling where speed matters more than noise. The 2-pin design ensures compatibility with older systems. It is a functional choice for users who need reliable airflow without advanced features. The simple design fits older cases and builds.

Thermalright 92mm Slim PWM Fan

The Thermalright 92mm Slim PWM fan offers precise cooling in a slim package. It measures 3.62 by 0.59 inches and weighs 1.6 ounces. It uses a 4-pin connector for PWM speed control. You get a single fan instead of a hub for multiple connections. This model suits tight CPU cooler mounts where space is limited. It lacks the ten-port expansion capability of the LRONG hub. You trade hub versatility for efficient airflow in constrained areas. The slim design fits radiators and coolers with low clearance. This pick is ideal for builders who need quiet, precise cooling. It is a practical solution for high-performance builds with space constraints.

Thermalright 120mm Slim ARGB Fan

The Thermalright 120mm Slim ARGB fan combines low profile with synced lighting. It measures 4.72 by 0.59 inches and weighs 3.53 ounces. It uses a 4-pin connector for PWM control and ARGB lighting. You get a single fan with motherboard-synced effects. This model suits slim cases and radiators with limited depth. It lacks the ten-port expansion capability of the LRONG hub. You trade hub versatility for synchronized lighting and low profile. This pick is ideal for builders who want visual consistency in tight spaces. The ARGB feature allows integration with motherboard software. It is a practical choice for modern builds with aesthetic priorities.

Quick picks

Our 7 picks

1 Best overall

LRONG 10-Port PWM SATA Fan Hub

Best for: expanding fan count from limited motherboard headers

Compatible Device

CPU Cooler

Weight

2.08 ounces

View on Amazon: LRONG 10-Port PWM SATA Fan Hub Affiliate link

This LRONG hub expands your case cooling options by adding ten fan ports via a single SATA power connection. It accepts both 3-pin and 4-pin PWM fans, allowing you to connect up to ten chassis or CPU fans. The included 40cm PWM cable links to your motherboard for automatic speed control based on temperature. It is a practical solution for users with limited motherboard headers who need to manage multiple fans efficiently.

Pros

• Expands capacity to ten 4-pin fan ports from one SATA connection
• Supports both 3-pin and 4-pin fan types
• Includes a 40cm PWM cable for motherboard speed control
• Uses 3M adhesive for secure chassis mounting

Cons

• Requires a free SATA power connector from your power supply
• Relies on 3M adhesive rather than standard screw mounting
• Does not include a separate manual speed controller

Good fit if

• You have exhausted your motherboard fan headers
• You need to connect multiple fans to a single power source
• You want automatic temperature-based fan speed control

Skip if

• You prefer screw-mounted hardware over adhesive
• Your power supply lacks available SATA connectors
• You need a dedicated hardware knob for manual speed adjustment

Verdict: LRONG 10-Port PWM SATA Fan Hub is a straightforward expansion tool for builders who need to add more fans than their motherboard supports. It fits users who prioritize automated temperature control and have available SATA power lines.

2 Best budget

Kingwin 80mm Black Cooling Fan

Best for: quiet, compact PC cooling

Fan Size

80mm

Bearing Type

Long Life Bearing

Compatible Device

CPU Cooler

Dimensions

0.98 × 3.15 × 3.15 inches

Weight

2.43 ounces

View on Amazon: Kingwin 80mm Black Cooling Fan Affiliate link

The Kingwin 80mm Silent Fan is a compact cooling solution for tight spaces. It measures 3.15 x 3.15 x 0.98 inches and weighs 2.43 ounces. The black frame houses a long life bearing for durability. It provides quiet operation and optimized airflow for CPU coolers or mining rigs. This fan suits users needing small, reliable ventilation without noise distractions.

Pros

• Compact 80mm size fits tight spaces
• Low noise profile for quiet builds
• Long life bearing ensures durability
• Optimized blade design for good airflow

Cons

• No PWM or RGB control options
• Single fan pack only
• Basic black design lacks aesthetics

Good fit if

• You need a small fan for a CPU cooler
• You prioritize silence over flashy lighting
• You are building a mining rig

Skip if

• You require ARGB lighting effects
• You need PWM speed control
• You want a larger 120mm fan

Verdict: Kingwin 80mm Silent Fan delivers reliable, quiet airflow in a small package. It fits users who value durability and low noise over advanced features like RGB lighting.

3 Best 3-pin

GDSTIME 70mm 3-Pin Cooling Fan 2-Pack

Best for: small, quiet 3-pin cooling needs

Fan Size

70mm

Max Fan Speed

2500 RPM

Max Airflow

18.7CFM

Noise Level

25.8dBA

Connector Type

3-Pin

Bearing Type

Sleeve Bearing

View on Amazon: GDSTIME 70mm 3-Pin Cooling Fan 2-Pack Affiliate link

This GDSTIME 70mm fan uses a 3-pin connector for direct motherboard control. It delivers 18.7 CFM of airflow at 2500 RPM. The sleeve bearing supports up to 35,000 hours of operation. You get two fans in the pack. The 70x15mm frame fits tight spaces. It suits you if you need quiet, small fans for specific cooling spots.

Pros

• 3-pin connector for direct speed control
• Low 25.8 dBA noise level
• 18.7 CFM airflow at 2500 RPM
• 35,000-hour sleeve bearing lifespan

Cons

• 70mm size is smaller than standard 80mm or 120mm fans
• Sleeve bearing may not last as long as fluid dynamic bearings
• No PWM speed control via motherboard header

Good fit if

• You need small 70mm fans for tight spaces
• You want quiet operation under 26 dBA
• You prefer 3-pin direct control

Skip if

• You require PWM fan control
• You need larger 120mm or 140mm fans
• You want RGB lighting effects

Verdict: GDSTIME 70mm 3-Pin DC Fan fits you if you need small, quiet fans for tight spaces. It works well for basic cooling where PWM control is not required.

4 Best premium

DS leddess 120mm 6-Pack RGB Fans

Best for: Full case RGB lighting setups

Fan Size

120mm

Connector Type

6-pin

Lighting Type

RGB

Compatible Device

Radiator, CPU Cooler

Dimensions

4.72 × 4.72 × 0.98 inches

View on Amazon: DS leddess 120mm 6-Pack RGB Fans Affiliate link

This 120mm RGB fan pack includes six units designed for case or radiator cooling. It uses a 6-pin connector and comes with an RF remote for color and speed changes. Silicone pads reduce vibration. You get consistent lighting across all fans. The kit requires a specific 6-fan setup or a 3-fan plus 2-LED strip configuration to function. It fits standard cases and CPU coolers.

Pros

• Includes six 120mm fans for uniform airflow and lighting
• RF remote control adjusts color patterns and speed
• Silicone pads minimize motor vibration noise
• Standard 120mm size fits most cases and radiators

Cons

• Requires a 6-pin connector and specific kit configuration
• Cannot be used as a single independent fan
• No PWM support for motherboard fan header control

Good fit if

• You want a matched set of six RGB fans
• You prefer remote control over software management
• You have a case with space for multiple 120mm units

Skip if

• You need a single fan for a specific spot
• You want to control fans via motherboard headers
• You only need one or two fans for your build

Verdict: DS leddess 120mm RGB Fan 6-Pack is a solid choice for builders who want a full set of quiet, remotely controlled RGB fans. It suits those prioritizing visual consistency and vibration dampening over individual fan control.

5 Best 2-pin

DORHEA 80mm 2-Pin DC Fans (2-Pack)

Best for: Legacy 2-pin CPU cooling

Fan Size

80mm

Max Fan Speed

4500RPM

Max Airflow

41CFM

Noise Level

37.9dBA

Connector Type

2pin-ph2.5

Compatible Device

Radiator, CPU Cooler

View on Amazon: DORHEA 80mm 2-Pin DC Fans (2-Pack) Affiliate link

This DORHEA fan offers an 80mm x 80mm x 25mm footprint with a 2-pin connector. It runs at 4500 RPM, delivering 41 CFM of airflow. The unit operates at 37.9 dBA on DC 12V power. You should use this for CPU or radiator cooling in systems that rely on legacy 2-pin headers. It provides a straightforward, brushless cooling solution without PWM control.

Pros

• 2-pin connector for legacy motherboard headers
• High 4500 RPM maximum fan speed
• 41 CFM airflow capacity
• Brushless motor design for durability

Cons

• Lacks PWM speed control via motherboard
• No LED lighting included
• 37.9 dBA noise level is moderate

Good fit if

• You need a 2-pin replacement fan
• You require high RPM for airflow
• You are cooling a CPU or radiator

Skip if

• You need PWM fan control
• You want silent operation below 30 dBA
• You prefer RGB lighting effects

Verdict: DORHEA 80mm 2-Pin PC Fan suits builders needing high airflow from legacy 2-pin headers. It is a functional choice for CPU cooling where speed matters more than noise or smart control.

6 Also great

Thermalright 92mm Slim PWM Fan

Best for: tight 92mm CPU cooler mounts

Fan Size

92mm

Max Fan Speed

2700RPM

Max Airflow

42.58CFM

Static Pressure

1.33mm H2O

Noise Level

≤22.4dBA

Connector Type

4-pin PWM

View on Amazon: Thermalright 92mm Slim PWM Fan Affiliate link

This 92mm fan features a 15mm ultra-thin profile for tight spaces. It uses a 4-pin PWM connector for automatic speed control based on motherboard temperature. The liquid bearing supports a max speed of 2700RPM while maintaining noise levels at or below 22.4dBA. You get 42.58CFM airflow and 1.33mm H2O static pressure. It suits CPU coolers and compact cases where space is limited.

Pros

• 15mm ultra-thin depth fits tight spaces
• 4-pin PWM for automatic temperature-based speed control
• Liquid bearing for low noise and longevity
• Max speed of 2700RPM for strong cooling

Cons

• Smaller 92mm size limits total airflow compared to 120mm fans
• Grey color only available in base model
• No RGB lighting included

Good fit if

• You need a fan for a 92mm CPU cooler slot
• You want quiet operation under 22.4dBA
• You have limited depth for case fan installation

Skip if

• You require 120mm or larger fan dimensions
• You want customizable RGB lighting effects
• You prefer 80mm fans for smaller chassis

Verdict: The Thermalright TL-9015 92mm 15mm Fan delivers efficient cooling in a slim package. It is ideal for builders who need precise airflow in tight CPU cooler mounts without excessive noise.

7 Best argb

Thermalright 120mm Slim ARGB Fan

Best for: Slim cases and motherboard-synced lighting

Fan Size

120mm

Max Fan Speed

1500RPM

Max Airflow

52CFM

Static Pressure

1.24mm H2O

Noise Level

≤24.1dBA

Connector Type

4-pin PWM

View on Amazon: Thermalright 120mm Slim ARGB Fan Affiliate link

This 120mm fan offers quiet cooling with a maximum speed of 1500 RPM and noise levels at or below 24.1 dBA. It features a slim 15mm profile and delivers 52 CFM of airflow. The unit includes ARGB lighting that syncs with your motherboard. You get a 4-pin PWM connector for automatic speed control. This fan suits builds where space is tight and lighting is a priority.

Pros

• Slim 15mm height fits tight spaces
• ARGB lighting syncs with motherboard
• Quiet operation at 24.1 dBA
• 4-pin PWM for speed control

Cons

• Lower static pressure than bulkier fans
• No remote control included
• Single fan sold individually

Good fit if

• You need a slim 15mm fan for tight cases
• You want ARGB lighting that syncs with your motherboard
• You prioritize quiet operation under 25 dBA

Skip if

• You need high static pressure for thick radiators
• You prefer fans with included remote controls
• You are buying in bulk packs for multiple slots

Verdict: Thermalright C12015W-S ARGB 120mm Fan fits builders who need a low-profile fan with synchronized lighting. It works well for cases with limited depth or for mounting on slim radiators.

Specifications side by side

Frequently asked questions

See also

• rowenta pedestal fan alternatives
• thfklxt PC motherboard alternatives