JOYJOM 14.6L Micro ATX Case Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This joyjom micro atx case fans review covers a compact build option for smaller desks. The JOYJOM 14.6L Micro ATX Case with RGB Fans holds Micro-ATX and Mini-ITX motherboards. It measures 350x165x265mm. Two 90mm RGB fans come pre-installed. The tempered glass side panel shows your parts. It fits GPUs up to 310mm long. The case supports standard ATX power supplies. This small box balances size and component support. You get front I/O with USB 3.0 and Type-C ports. It is a practical choice for tight spaces.
What stands out
- 14.6L volume with tempered glass side panel
- Pre-installed 2x 90mm RGB fans
- Supports Micro-ATX and Mini-ITX motherboards
- GPU length up to 310mm
- Front I/O includes USB 3.0 and Type-C
Who it fits
Good fit for
This case suits users with small desks who still want room for a decent graphics card. If you are building a Mini-ITX or Micro-ATX system, the 14.6L volume gives you enough space. The pre-installed RGB fans help with airflow right away. You can fit GPUs up to 310mm long, which covers many mid-range cards. The front ports are convenient for daily use. It is a good fit for compact gaming rigs or office builds where space is limited.
Who should skip it
Skip this option if you need extensive storage. The bottom fan slots limit drive options. With three 90mm fans, you only get one SSD slot. If you install no fans, you get one HDD and two SSDs. You cannot have many hard drives in this small box. Also, if you use a long power supply over 150mm, your GPU support drops to 220mm. Users needing high airflow or large drives should look elsewhere.
Verdict: The JOYJOM 14.6L Micro ATX Case is a solid choice for small builds with standard components. It offers good value with pre-installed fans and a glass panel.
Key Specs Explained
Case Volume: 14.6L
This volume indicates a very compact chassis designed for small desks or limited spaces. You get a small footprint that fits easily on crowded workstations. The tight interior means you must carefully plan component placement. This size suits users who prioritize space savings over extensive expansion slots or massive cooling setups. It is ideal for compact builds where desk real estate is at a premium.
Motherboard Support: Micro-ATX, Mini-ITX
The case accepts Micro-ATX and Mini-ITX motherboards, which are smaller form factors than standard ATX. This limits the number of expansion slots and RAM slots available. You benefit from lower component costs and reduced power consumption. However, you have fewer options for adding add-in cards. This fits users building efficient systems who do not need extensive connectivity or multiple graphics cards for their PC.
Included Fans: 2x 90mm RGB
Two 90mm fans come pre-installed to provide basic airflow and visual appeal. The RGB lighting adds color to your build without extra setup. These fans are smaller than standard 120mm units, offering less air movement per rotation. You may need to add more fans for optimal cooling in high-performance builds. This is good for entry-level systems where aesthetics matter and thermal demands are moderate.
Max GPU Length: 310mm
You can install graphics cards up to 310mm long. This allows for many mid-range and some high-end cards. You must check your specific card dimensions before buying. If your power supply is long, this clearance drops to 220mm. This spec helps you avoid buying a GPU that will not fit inside the case. It provides flexibility for common modern graphics cards while maintaining a compact overall profile.
Side Panel: Tempered Glass
The side panel is made of tempered glass, which is stronger than standard plastic. It offers a clear view of your internal components and lighting effects. You get a premium look that showcases your build quality. The glass is durable but can still break if struck hard. This feature suits users who want to display their hardware aesthetics. It is a standard choice for modern cases focused on visual presentation.
Design and Build Overview
The listing specifies a 0.8mm SPCC steel chassis in black. This steel type offers standard rigidity for a compact enclosure. The exterior includes a panoramic tempered glass side panel. This material choice prioritizes visual clarity for internal components over impact resistance. The case measures 350x165x265mm. This small footprint suits tight desks or limited spaces. You must plan component placement carefully due to the restricted interior volume. The design supports Micro-ATX and Mini-ITX motherboards. This flexibility allows you to choose smaller boards for tighter builds.
Pre-installed fans include two 90mm RGB units. These provide basic airflow and lighting without extra setup. The listing notes a built-in 0.75 mm² power adapter cable. This cable supports power supplies up to 1000W. However, if your power supply exceeds 150mm in length, the GPU support drops to 220mm. You need to check your specific parts against these clearances. The rear panel features two USB 3.0 ports, one USB 2.0 port, and a Type-C port. These connectivity options are standard for modern peripherals. The finish is a simple black coat. This color hides dust well but offers no special texture. The overall design focuses on fitting specific components into a small space rather than premium materials.
Setup And Everyday Use
Installing components into this 14.6L chassis requires careful planning due to its compact dimensions. The listing supports Micro-ATX and Mini-ITX motherboards, which helps keep the build size manageable. You must check clearance for your graphics card, as the max length is 310mm. If you use a power supply longer than 150mm, that limit drops to 220mm. You also need to account for 15mm of clearance for GPU power cables at the rear. CPU coolers must fit under 135mm in height. Fan installation offers flexibility but impacts storage. You can mount up to three 90mm fans or two 120mm fans at the bottom. However, this configuration reduces available space for drives. If you prefer more storage, you can reduce the fan count. The case includes two 90mm RGB fans pre-installed, so you do not need to purchase them separately. Connectivity is handled by two USB 3.0 ports, one USB 2.0 port, and a Type-C port on the front panel. This setup suits users who prioritize a small footprint on their desk. You will need to measure all components before purchase to ensure they fit within the 350x165x265mm interior space. The tempered glass panel allows you to view your hardware, but the tight quarters mean cable management will require precision.
Before You Buy This Case
This compact chassis requires careful component selection to fit properly. You must verify that your graphics card does not exceed 310mm in length. If your power supply is longer than 150mm, the GPU limit drops to 220mm. Check that your CPU cooler stays under 135mm in height. The included fans are 90mm RGB units. You may need additional fans for better airflow, as the case supports up to five total fans depending on storage needs. Installing bottom fans reduces SSD capacity. The rear I/O panel includes two USB 3.0 ports, one USB 2.0 port, and a Type-C connector. This placement is convenient for daily access. The tempered glass side panel needs regular cleaning to maintain clarity. This case suits users with small desks who prioritize visual appeal over extreme expandability. It fits alongside larger options by offering a minimalist footprint for specific builds.
Check before you buy
- Check GPU length against 310mm limit.
- Verify CPU cooler height is under 135mm.
- Confirm power supply length is under 150mm.
- Plan storage layout with fan placement in mind.
The product at a glance
JOYJOM 14.6L Micro ATX Case with RGB Fans
Best for: Compact builds with visible RGB lighting
- Motherboard Support
- Micro-ATX, Mini-ITX
- Side Panel
- Tempered Glass
- Included Fans
- 2x 90mm RGB
- Max GPU Length
- 310mm
- Case Volume
- 14.6L
- Connectivity
- Type-C, USB 3.0
View on Amazon: JOYJOM 14.6L Micro ATX Case with RGB Fans Affiliate link
This compact case offers 14.6 liters of space for Micro-ATX and Mini-ITX motherboards. It includes two pre-installed 90mm RGB fans and features a panoramic tempered glass side panel. You get USB 3.0 and Type-C connectivity. The interior supports GPUs up to 310mm long. It suits builders needing a small footprint with visible internal lighting.
Pros
- Pre-installed 2x 90mm RGB fans
- Panoramic tempered glass side panel
- USB 3.0 and Type-C ports
- Supports GPUs up to 310mm long
Cons
- Includes only two fans
- 90mm fan size limits airflow options
- Bottom fan installation reduces storage space
Good fit if
- You need a small form factor case
- You want visible RGB lighting
- You use Micro-ATX or Mini-ITX boards
Skip if
- You require extensive storage drives
- You need high-performance airflow
- You plan to use large 120mm or 140mm fans
Verdict: JOYJOM 14.6L Micro ATX Case fits users prioritizing a compact build with visible RGB aesthetics. It is not suitable for those needing maximum airflow or extensive storage capacity.
Specifications side by side
| Spec | JOYJOM 14.6L Micro ATX Case with RGB Fans |
|---|---|
| Motherboard Support | Micro-ATX, Mini-ITX |
| Side Panel | Tempered Glass |
| Included Fans | 2x 90mm RGB |
| Max GPU Length | 310mm |
| Case Volume | 14.6L |
| Lighting | RGB |
| Connectivity | Type-C, USB 3.0 |
| Compatible Device | CPU Cooler |
| Dimensions | 6.5 × 10.4 × 13.8 inches |
| Size | 14.6L |
| Color | Black |
| Model | PS091 |
Frequently asked questions
Does the JOYJOM PS091 case support ATX motherboards?
No, this chassis is designed exclusively for Micro-ATX motherboards. It does not accept full-size ATX boards. You must select a smaller motherboard form factor to fit inside the 14.6L interior. The compact design prioritizes space efficiency over large motherboard compatibility.
What connectivity options are available on the front panel?
The front I/O panel includes a USB Type-C port and a USB 3.0 port. These connections allow you to link modern peripherals and external storage devices directly. The layout provides quick access to essential data transfer speeds without needing to reach behind the desk.
Is the JOYJOM case suitable for large air coolers?
You must verify clearance carefully, as the case is compact. The listing notes compatibility with CPU coolers but does not specify a maximum height. Given the 13.8-inch height and tight internal volume, large tower coolers may not fit. Check your cooler dimensions against the internal space before purchasing.
How many fans are included with the JOYJOM PS091?
The case comes pre-installed with two 90mm RGB fans. These fans provide initial airflow and visible lighting effects right out of the box. The RGB lighting adds aesthetic appeal to your build. You can add more fans if needed, but the package includes these two standard units.
What is the maximum graphics card length for this case?
The maximum graphics card length depends on your power supply size. If your PSU is 150mm or shorter, you can install a GPU up to 310mm long. If the PSU exceeds 150mm, the limit drops to 220mm. Always measure your specific components to ensure they fit within these constraints.
Does the JOYJOM case have a tempered glass side panel?
Yes, the chassis features a tempered glass side panel. This material offers high clarity for showcasing your internal components and RGB lighting. It provides a modern, sleek look for your desktop setup. The glass is designed to display your build aesthetics effectively while protecting the interior from dust.