Jonsbo or SilverStone? PC Cases Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking at a jonsbo vs SilverStone PC case comparison. Both options support Micro-ATX motherboards and fit ATX power supplies. The Jonsbo D31 is a mid-sized mesh case with high clearance for large graphics cards and radiators. The SilverStone SG11 is a compact small form factor chassis. You need to decide between standard airflow and space efficiency.
Key differences
| Aspect | Jonsbo Mesh Micro-ATX Case | SilverStone Micro-ATX Small Form Factor Case |
|---|---|---|
| Case Type | Micro ATX | Small Form Factor |
| Max GPU Length | 400mm | Any length |
| Radiator Support | 360mm | not listed |
| Dimensions | 8.07 x 14.3 x 17.3 inches | 15 x 13 x 19 inches |
Which one should you choose?
Choose Jonsbo Mesh Micro-ATX Case if
- You need to install a graphics card up to 400mm long.
- You want to use a 360mm liquid cooler.
- You prefer a mesh front panel for better airflow.
Choose SilverStone Micro-ATX Small Form Factor Case if
- You want a smaller footprint for your desk.
- You plan to use Mini-DTX or Mini-ITX motherboards.
- You need ample space for 2.5-inch drives.
Verdict: Choose the Jonsbo D31 if you prioritize high component compatibility and airflow. Pick the SilverStone SG11 if you need a compact chassis that fits smaller form factor boards. Your choice depends on whether you value size or expansion space.
Jonsbo vs SilverStone Case Specs
Motherboard support
Both cases support Micro-ATX motherboards, which is the primary form factor for each build. The Jonsbo D31 explicitly lists support for MATX and ITX boards in its specifications, giving you flexibility for smaller builds. The SilverStone SG11 also supports Micro-ATX, Mini-DTX, and Mini-ITX. This means you can use the smallest standard boards in either chassis. Since both options cover the essential Micro-ATX and ITX sizes, the difference here is minimal for most users looking for a compact setup.
Tower size
The physical footprint of these cases differs significantly. The Jonsbo D31 measures 8.07 inches in width, 14.3 inches in height, and 17.3 inches in length. This makes it a mid-sized tower that occupies more desk space. The SilverStone SG11 is labeled as a Small Form Factor case. It measures 15 inches in width, 13 inches in height, and 19 inches in length. While the SilverStone is taller and wider, the Jonsbo is more compact in overall volume. You should choose the Jonsbo if you need a smaller footprint on your desk.
Radiator support
Cooling options vary between the two models. The Jonsbo D31 supports radiators up to 360mm in length. It can mount a 360mm or 280mm AIO at the top, and a 360mm or 240mm AIO at the bottom. This provides excellent flexibility for liquid cooling setups. The SilverStone SG11 specifications do not list specific radiator support sizes or mounting locations. It mentions ample space for CPU cooling with an 82mm height limit for air coolers. If you plan to use large liquid coolers, the Jonsbo offers clear advantages with its explicit radiator mounts.
GPU compatibility
Graphics card length limits are a key factor for high-end builds. The Jonsbo D31 supports GPUs up to 400mm in length. This allows you to install large, modern graphics cards without fitting issues. The SilverStone SG11 features a unique design that supports graphics cards of any length. This is a significant advantage for users with exceptionally long cards that might exceed standard case limits. However, the Jonsbo still accommodates most high-end cards up to 400mm. If your card exceeds 400mm, the SilverStone is the safer choice.
Power supply fit
Both cases accept ATX power supplies, but the Jonsbo D31 offers additional flexibility. It supports ATX and SFX power supplies, with a maximum length of 220mm. The Jonsbo also includes a four-level height adjustment for the power supply position, allowing you to optimize airflow and cable management. The SilverStone SG11 supports ATX power supplies but does not mention SFX compatibility or adjustable mounting positions in the provided data. The Jonsbo provides more options for power supply selection and placement within the chassis.
Which Case Fits Your Build
You need high-end GPU clearance
The Jonsbo D31 supports graphics cards up to 400mm in length. This specification allows you to install large, modern video cards without fitting issues. Its mesh design aids airflow for these high-performance components, ensuring stable temperatures during heavy loads.
You want extreme component flexibility
This case offers adjustable power supply positioning with four height levels. You can accommodate various ATX or SFX power supplies with lengths from 100mm to 220mm. This adjustability helps you manage cable routing and fit different power supply models efficiently in the chassis.
You prefer a compact small form factor
The SilverStone SG11 is designed as a small form factor case. It supports Micro-ATX, Mini-DTX, and Mini-ITX motherboards in a compact footprint. This design suits builders who prioritize a smaller chassis size while maintaining compatibility with standard ATX power supplies for their system.
The products compared
Jonsbo Mesh Micro-ATX Case
Best for: Compact builds with long GPUs or 360mm AIOs
- Motherboard Support
- MATX, MicroATX, ITX
- Case Type
- Micro ATX
- Radiator Support
- 360mm
- Max GPU Length
- 400mm
- Dimensions
- 17.3 × 8.07 × 14.3 inches
View on Amazon: Jonsbo Mesh Micro-ATX Case Affiliate link
The Jonsbo D31 Mesh is a compact Micro ATX case designed for efficient airflow and broad hardware compatibility. It supports motherboards up to MATX and GPUs up to 400mm in length. The mesh front panel aids cooling, while the chassis accommodates up to a 360mm radiator. You get four levels of PSU height adjustment for flexible cable management. This build suits users who need a small footprint without sacrificing component support.
Pros
- Supports Micro ATX and Mini ITX motherboards
- Accommodates GPUs up to 400mm long
- Fits 360mm top or bottom radiators
- Four-level PSU height adjustment
- Mesh front panel for improved ventilation
Cons
- Limited to Micro ATX form factor
- Air cooler height limited to 168mm
- No mention of included case fans
Good fit if
- You need a small case that fits long graphics cards
- You plan to use a 360mm AIO cooler
- You want a mesh front for better airflow
Skip if
- You require support for full-size ATX motherboards
- You need a case with pre-installed fans
- You prefer a solid front panel for aesthetics
Verdict: Jonsbo D31 Mesh Micro ATX Case offers strong compatibility for long GPUs and large coolers in a compact Micro ATX footprint, making it a solid choice for small builds with high-end components.
SilverStone Micro-ATX Small Form Factor Case
Best for: Compact Micro-ATX builds with long GPUs
- Motherboard Support
- Micro-ATX, Mini-DTX, Mini-ITX
- Case Type
- SFF
- Max GPU Length
- Any length
- Tower Size
- Small Form Factor
- Dimensions
- 19 × 15 × 13 inches
- Weight
- 13.5 pounds
View on Amazon: SilverStone Micro-ATX Small Form Factor Case Affiliate link
The SilverStone SG11B is a small form factor case designed for Micro-ATX, Mini-DTX, and Mini-ITX motherboards. It supports ATX power supplies and graphics cards of any length. The chassis measures 19 by 15 by 13 inches and weighs 13.5 pounds. It offers 82mm of CPU cooler height clearance. This build suits users needing compact storage for multiple 2.5-inch drives.
Pros
- Supports Micro-ATX, Mini-DTX, and Mini-ITX motherboards
- Compatible with ATX power supplies
- Accepts graphics cards of any length
- Provides 82mm CPU cooler clearance
- High capacity for 2.5-inch drives
Cons
- Limited to Micro-ATX and smaller motherboard sizes
- No mention of front I/O ports in specifications
- Heavier build at 13.5 pounds
Good fit if
- You need a compact chassis for Micro-ATX or Mini-ITX builds
- You require support for long graphics cards
- You want to install multiple 2.5-inch drives
Skip if
- You require full ATX motherboard support
- You need a larger chassis for extensive airflow
- You prefer a lighter case under 10 pounds
Verdict: SilverStone SG11B Micro-ATX SFF Case fits builders who prioritize compact dimensions and flexible component lengths. It is ideal for small footprints that still need to accommodate long GPUs and ATX power supplies.
Specifications side by side
| Spec | Jonsbo Mesh Micro-ATX Case | SilverStone Micro-ATX Small Form Factor Case |
|---|---|---|
| Motherboard Support | MATX, MicroATX, ITX | Micro-ATX, Mini-DTX, Mini-ITX |
| Case Type | Micro ATX | SFF |
| Radiator Support | 360mm | not stated |
| Max GPU Length | 400mm | Any length |
| Tower Size | not stated | Small Form Factor |
| Dimensions | 17.3 × 8.07 × 14.3 inches | 19 × 15 × 13 inches |
| Weight | not stated | 13.5 pounds |
| Color | BLACK | Black (SG11) |
| Model | D31 | SG11B |
Frequently asked questions
Is the Jonsbo D31 too small for a 360mm radiator?
No, the Jonsbo D31 is designed to accommodate 360mm AIOs. It measures 17.3 inches in length, providing ample space for large coolers. This makes it suitable for compact builds that require high-end thermal solutions without compromising on component compatibility or airflow efficiency.
Does the SilverStone SG11 support standard ATX power supplies?
Yes, the SilverStone SG11 supports ATX power supplies. Despite its small form factor design, it allows for flexible component lengths. This ensures you can use standard power units while maintaining a compact footprint, making it ideal for builders prioritizing space efficiency.
Which case is better for long graphics cards?
The Jonsbo D31 offers strong compatibility for long GPUs. Its 17.3-inch length allows for large video cards in a Micro-ATX footprint. The SilverStone SG11 also fits long GPUs, but the D31 is specifically noted for high clearance, making it a solid choice for high-end components.
What are the exact dimensions of the Jonsbo D31?
The Jonsbo D31 measures 8.07 inches in width, 14.3 inches in height, and 17.3 inches in length. These dimensions define its mid-sized mesh case profile. The compact width and height help save desk space while the length accommodates larger internal components effectively.
How heavy is the SilverStone SG11 case?
The SilverStone SG11 weighs 13.5 pounds. This weight reflects its build quality and material choices. Knowing the weight helps you plan for transportation and desk support. It is a substantial unit for its small form factor, ensuring stability during operation.
Can I install an ITX motherboard in the Jonsbo D31?
Yes, the Jonsbo D31 supports Micro-ATX and ITX boards. This flexibility allows you to choose smaller motherboards if desired. It gives you the option to build even more compact systems while still utilizing the case's spacious interior for other components.
Is the SilverStone SG11 considered a small form factor case?
Yes, the SilverStone SG11 is classified as a Small Form Factor case. It measures 15 inches in width and 13 inches in height. This compact design is ideal for builders who prioritize a small footprint without sacrificing the ability to fit larger components like GPUs.