Jonsbo Mesh Micro-ATX Case vs Jonsbo Mini-ITX SFF Case Walnut (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison looks at the jonsbo d31 mesh black micro vs nv10 black mini itx PC case. Both units offer compact builds from Jonsbo, but they serve different goals. The D31 focuses on micro-ATX compatibility with strong airflow and high-end hardware support. The NV10 prioritizes extreme portability with a walnut-accented aluminum design. You need to decide if you value expandability or a small footprint.
Key differences
| Aspect | Jonsbo Mesh Micro-ATX Case | Jonsbo Mini-ITX SFF Case with Walnut Trim |
|---|---|---|
| Motherboard Support | Micro-ATX, ITX | Mini-ITX |
| Case Volume | Not listed | 4.5L |
| Max GPU Length | 400mm | 190mm |
| Radiator Support | 360mm | Not listed |
| Air Cooler Height | 168mm | 38mm |
| Material | Mesh steel | Aluminum alloy with walnut trim |
Which one should you choose?
Choose Jonsbo Mesh Micro-ATX Case if
- You need to install large graphics cards up to 400mm long.
- You want to use a micro-ATX motherboard for more expansion slots.
- You prefer strong airflow from a mesh panel design.
Choose Jonsbo Mini-ITX SFF Case with Walnut Trim if
- You require a very small form factor under 5 liters.
- You want a portable case that fits in tight spaces.
- You prefer a premium look with aluminum and walnut accents.
Verdict: Choose the D31 if you need room for standard components and better cooling performance. Pick the NV10 if your priority is minimizing physical footprint and aesthetics. The D31 is the practical choice for most builders, while the NV10 suits specific space constraints.
Jonsbo D31 Mesh vs NV10 SFF
Motherboard Support
The Jonsbo D31 Mesh supports Micro-ATX and Mini-ITX motherboards, offering flexibility for standard mid-range builds. This allows you to use more expansion slots and larger components. The Jonsbo NV10 is strictly for Mini-ITX boards. This limits your choices to the smallest form factor. If you need extra PCIe slots or a larger PCB, the D31 is the only option. The NV10 forces a compact, single-board design. Choose the D31 for versatility. Pick the NV10 only if you are committed to Mini-ITX specifically.
Tower Size
Size differences are stark between these two cases. The D31 measures 17.3 inches in length, 14.3 inches in height, and 8.07 inches in width. It occupies significant desk or floor space. The NV10 is a tiny 4.5-liter box. It measures 8.07 inches wide, 4.25 inches high, and 8.07 inches deep. You can place it in many spots. The D31 is a traditional tower. The NV10 is a small form factor cube. Your desk space dictates the choice here. Large builds need the D31. Minimal setups fit the NV10.
Radiator Support
Cooling options vary greatly. The D31 supports up to a 360mm radiator on the top and bottom. It also handles 280mm and 240mm sizes. This allows for strong liquid cooling solutions. The NV10 does not list radiator support. It relies on air cooling. You must use an air cooler under 38mm in height. This restricts you to small, low-profile coolers. The D31 wins for thermal headroom. You can run hotter components with the D31. The NV10 is limited to passive or mild active cooling.
GPU Compatibility
Graphics card length is a major differentiator. The D31 accepts GPUs up to 400mm long. You can install high-end cards like the RTX 4090. The NV10 only supports low-profile cards up to 190mm. This excludes most standard desktop graphics cards. You are limited to small, low-power GPUs in the NV10. The D31 allows for serious gaming or workstation performance. The NV10 is for office or light media tasks. If you need a powerful GPU, the D31 is required. The NV10 is too small for standard cards.
Power Supply
Power supply types differ significantly. The D31 supports both ATX and SFX power supplies. The length can reach 220mm. This gives you many PSU options. The NV10 requires a 1U Flex power supply. The maximum length is 150mm. Flex PSUs are less common and often more expensive. The D31 offers broader compatibility. You can use standard ATX units. The NV10 restricts you to specific small form factor units. The D31 is easier to build with regarding power.
Which Jonsbo Case Fits Your Build
You want high-end GPU support in a compact size
The Jonsbo D31 Mesh supports graphics cards up to 400mm long. This allows you to install large, high-performance GPUs without fitting issues. It also accepts up to a 360mm radiator, ensuring your powerful components stay cool. The mesh front panel improves airflow for demanding workloads.
You prefer a small, stylish desktop with walnut accents
The Jonsbo NV10 offers a 4.5L volume with a black aluminum alloy shell and North American walnut trim. It measures just 108mm in height, making it easy to place in tight spaces. The handle on the cover simplifies disassembly and maintenance for a clean, portable setup.
You need flexible motherboard options and tool-free assembly
The D31 Mesh supports both Micro-ATX and Mini-ITX motherboards, giving you more choices for expansion slots. It features a four-level height adjustment for the power supply. This flexibility helps you optimize cable management and component placement. The mesh design ensures consistent ventilation for various hardware configurations.
The products compared
Jonsbo Mesh Micro-ATX Case
Best for: Micro-ATX builds needing large GPU clearance
- Motherboard Support
- MATX, MicroATX, ITX
- Case Type
- Micro ATX
- Radiator Support
- 360mm
- Max GPU Length
- 400mm
- Dimensions
- 17.3 × 8.07 × 14.3 inches
View on Amazon: Jonsbo Mesh Micro-ATX Case Affiliate link
The Jonsbo D31 Mesh is a Micro-ATX case with a ventilated front panel. It supports motherboards up to Micro-ATX and graphics cards up to 400mm in length. You can install 360mm radiators on the top or bottom. The power supply height adjusts in four levels. This setup suits builders who need high compatibility in a compact footprint.
Pros
- Mesh front panel for improved airflow
- Supports GPUs up to 400mm long
- Accepts 360mm radiators on top or bottom
- Four-level PSU height adjustment
Cons
- Limited to Micro-ATX motherboards
- No mention of side panel material
- No included case fans listed
Good fit if
- You are building a Micro-ATX system
- You need to fit a large GPU
- You prefer active front airflow
Skip if
- You require full ATX motherboard support
- You need a pre-installed fan setup
- You want a tempered glass side panel
Verdict: Jonsbo D31 Mesh Black Micro-ATX Case fits users who prioritize GPU length and airflow in a Micro-ATX form factor.
Jonsbo Mini-ITX SFF Case with Walnut Trim
Best for: Mini-ITX builds with low-profile parts
- Motherboard Support
- Mini-ITX
- Case Type
- SFF
- Max GPU Length
- 190mm
- Case Volume
- 4.5 L
- Dimensions
- 8.07 × 8.07 × 4.25 inches
View on Amazon: Jonsbo Mini-ITX SFF Case with Walnut Trim Affiliate link
The Jonsbo NV10 is a 4.5L Mini-ITX case built from aluminum alloy with North American walnut trim. It supports 1U Flex PSUs up to 150mm and low-profile GPUs up to 190mm. The perforated design aids airflow, while the tool-free cover allows easy access. You can place it standing or lying down. This compact build suits users prioritizing small form factor aesthetics and efficient heat dissipation in tight spaces.
Pros
- Aluminum alloy shell with walnut trim
- 4.5L compact SFF volume
- Supports 1U Flex PSU up to 150mm
- Tool-free upper cover with handle
- Perforated design for improved airflow
Cons
- Limited to Mini-ITX motherboards only
- Max GPU length restricted to 190mm
- Air cooler height limited to 38mm
Good fit if
- You need a Mini-ITX build under 5L
- You want a case with wood accents
- You use low-profile components
Skip if
- You require Micro-ATX support
- You plan to install standard GPUs
- You need high-end air cooling
Verdict: Jonsbo NV10 Mini-ITX Walnut Case is a compact option for Mini-ITX builders who value a small footprint and unique materials over expansion space.
Specifications side by side
| Spec | Jonsbo Mesh Micro-ATX Case | Jonsbo Mini-ITX SFF Case with Walnut Trim |
|---|---|---|
| Motherboard Support | MATX, MicroATX, ITX | Mini-ITX |
| Case Type | Micro ATX | SFF |
| Radiator Support | 360mm | not stated |
| Max GPU Length | 400mm | 190mm |
| Case Volume | not stated | 4.5 L |
| Dimensions | 17.3 × 8.07 × 14.3 inches | 8.07 × 8.07 × 4.25 inches |
| Color | BLACK | Black |
| Model | D31 | NV10 |
Frequently asked questions
Is the Jonsbo D31 Mesh case larger than the NV10?
Yes, the D31 is significantly larger. It measures 17.3 inches in length, 14.3 inches in height, and 8.07 inches in width. The NV10 is much smaller, with a square footprint of 8.07 inches by 8.07 inches and a height of only 4.25 inches. You will need more desk space for the D31.
Can I use a Mini-ITX board in the D31?
Yes, the Jonsbo D31 Mesh supports both Micro-ATX and Mini-ITX motherboards. This gives you flexibility if you plan to upgrade your motherboard later. The NV10 is strictly limited to Mini-ITX boards, so you cannot install larger Micro-ATX or ATX boards in that chassis.
Which case has a better footprint for small desks?
The Jonsbo NV10 has a much smaller footprint. Its base is a compact 8.07 inches by 8.07 inches. The D31 requires a base area of 8.07 inches by 17.3 inches. If you have limited desk space, the NV10 fits more easily into tight corners or smaller setups.
Does the NV10 support Micro-ATX motherboards?
No, the Jonsbo NV10 only supports Mini-ITX motherboards. It is designed specifically for small form factor builds. If you need to use a Micro-ATX board, you must choose the D31 Mesh, which is built to accommodate that larger motherboard size and its associated expansion slots.
What is the main size difference between these two cases?
The primary difference is vertical height and overall volume. The D31 stands 14.3 inches tall and is 17.3 inches long. The NV10 is very short at 4.25 inches tall and matches the D31 width at 8.07 inches. The D31 offers more internal volume for larger components.
Which case is better for a low-profile setup?
The Jonsbo NV10 is better for low-profile setups. Its height is only 4.25 inches, making it suitable for desks where height is restricted. The D31 is 14.3 inches tall, which requires more vertical clearance. Choose the NV10 if you want a compact, horizontal-looking build.