Jonsbo Mesh Micro-ATX Case vs Jonsbo Compact Micro-ATX Mesh Case: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide compares the jonsbo d31 mesh black micro vs c6 black mini matx mesh PC case. Both are black micro ATX chassis with mesh panels for airflow. The D31 is a mid-sized tower that supports large GPUs and coolers. The C6 is a compact desktop unit with a much smaller footprint. You need to choose based on your hardware size and desk space.
Key differences
| Aspect | Jonsbo Mesh Micro-ATX Case | Jonsbo Compact Micro-ATX Mesh Case |
|---|---|---|
| Motherboard Support | Micro-ATX | ITX, Micro-ATX |
| Max GPU Length | 400mm | 200-255mm |
| Radiator Support | 360mm | not listed |
| Case Dimensions | 8.07 x 14.3 x 17.3 inches | 8 x 11.6 x 10.5 inches |
| Side Panel | not listed | Mesh |
Which one should you choose?
Choose Jonsbo Mesh Micro-ATX Case if
- You need to fit a GPU up to 400mm long.
- You want to install a 360mm radiator.
- You prefer a taller tower case with more expansion room.
Choose Jonsbo Compact Micro-ATX Mesh Case if
- You have limited desk space and need a compact footprint.
- You want a tool-free design for quick assembly.
- You are building with smaller components like ITX boards.
Verdict: The D31 is the better choice if you plan to use high-end graphics cards or large coolers. The C6 is ideal for small builds where space is tight. Your decision depends on whether you prioritize component compatibility or physical size.
D31 vs C6 Spec Comparison
Motherboard support
Both cases support Micro ATX motherboards. The Jonsbo D31 also lists ITX support in its key specs, though the attributes specify Micro-ATX. The Jonsbo C6 explicitly supports both ITX and M-ATX. If you need ITX compatibility, the C6 data is clearer. Both fit standard Micro ATX boards. The D31 is a larger Micro ATX case, while the C6 is a compact Mini MATX chassis. For pure Micro ATX, either works. For ITX, check the C6. The D31 focuses on Micro ATX and larger components. The C6 offers flexibility for smaller ITX builds as well. Both are black.
GPU length
The Jonsbo D31 supports GPUs up to 400mm in length. This allows you to install high-end graphics cards, including the RTX 4090, which can be quite long. The Jonsbo C6 supports GPUs between 200mm and 255mm. This is a significant difference. If you plan to use a large graphics card, the D31 is the only viable option. The C6 is limited to shorter cards. You must check your specific GPU dimensions before buying the C6. The D31 offers much more room for modern, bulky video cards. This is a major advantage for performance builds.
Radiator support
The Jonsbo D31 supports 360mm and 280mm radiators on the top or bottom. This gives you flexibility for liquid cooling setups. The Jonsbo C6 supports a 120mm or 140mm fan on the top plate. It does not list support for large AIO radiators. The D31 is clearly better for water cooling. You can install a 360mm radiator in the D31. The C6 is limited to smaller air coolers or single-fan setups. If you need liquid cooling, the D31 is the choice. The C6 is designed for air cooling or small radiators. The D31 offers superior cooling options.
Case size
The Jonsbo D31 measures 8.07 inches in width, 14.3 inches in height, and 17.3 inches in length. The Jonsbo C6 is smaller, measuring 8 inches in width, 11.6 inches in height, and 10.5 inches in length. The C6 is a compact desktop chassis. The D31 is a mid-sized tower. If you have limited desk space, the C6 is easier to fit. The D31 requires more room. The C6 is more portable. The D31 is better for larger builds. The C6 is better for small spaces. Choose based on your desk size.
Cooler height
The Jonsbo D31 supports air coolers up to 168mm in height. This allows you to use larger air coolers. The Jonsbo C6 supports coolers up to 75mm in height. This is a major limitation. You must use a low-profile air cooler in the C6. The D31 offers much more flexibility for air cooling. If you want a quiet, large air cooler, the D31 is the only option. The C6 restricts you to small coolers. This affects cooling performance and noise. The D31 is better for air cooling enthusiasts.
Connectivity
The Jonsbo C6 includes a front panel with USB 3.0, Type-C, and audio ports. This is convenient for daily use. The Jonsbo D31 data does not list front panel connectivity. You cannot confirm if it has USB or audio ports. If front connectivity is important, the C6 is the safer choice. The D31 might have ports, but the data does not say. The C6 clearly offers modern connectivity. This is a practical advantage for the C6. You can easily connect devices without reaching behind the desk.
Which Jonsbo Case Fits Your Build
High-end GPU builders needing space
The D31 supports GPUs up to 400mm long. This allows you to install large graphics cards, including RTX 4090 models, without clearance issues. The C6 limits GPU length to 255mm, which restricts your hardware choices significantly. Choose the D31 if your build relies on high-performance, oversized components.
Small footprint enthusiasts preferring compact size
The C6 measures 202mm by 266mm by 295.2mm. It sits comfortably on a desk or under a monitor. The D31 is much larger at 452mm in height. If you prioritize a minimal desk footprint and do not need extreme component lengths, the C6 offers a tighter, more portable form factor for your setup.
Air cooler users wanting flexibility
The D31 accepts air coolers up to 168mm in height. The C6 restricts air coolers to 75mm. If you plan to use a standard tower cooler for better thermal performance, the D31 provides the necessary clearance. The C6 forces you into low-profile coolers, which may limit your thermal headroom for demanding processors.
The products compared
Jonsbo Mesh Micro-ATX Case
Best for: compact high-performance Micro ATX builds
- Motherboard Support
- MATX, MicroATX, ITX
- Case Type
- Micro ATX
- Radiator Support
- 360mm
- Max GPU Length
- 400mm
- Dimensions
- 17.3 × 8.07 × 14.3 inches
View on Amazon: Jonsbo Mesh Micro-ATX Case Affiliate link
The Jonsbo D31 Mesh is a black Micro ATX case with a mesh front for better airflow. It supports motherboards up to Micro ATX size. You can install GPUs up to 400mm long. The case handles air coolers up to 168mm high. It also fits 360mm radiators on the top or bottom. This compact build fits small workstations or esports PCs.
Pros
- Mesh front panel improves ventilation
- Supports GPUs up to 400mm long
- Fits 360mm radiators on top or bottom
- Adjustable PSU height for better cable management
Cons
- Limited to Micro ATX motherboards only
- No mention of included case fans
- Smaller internal volume than full ATX cases
Good fit if
- You need a compact Micro ATX build
- You plan to use large GPUs
- You want mesh airflow in a small form factor
Skip if
- You require Full ATX motherboard support
- You need extensive fan inclusion pre-installed
- You prefer a solid front panel design
Verdict: Jonsbo D31 Mesh Black Micro ATX Case offers strong GPU compatibility in a small footprint, making it ideal for users building compact high-performance systems.
Jonsbo Compact Micro-ATX Mesh Case
Best for: Compact micro-ATX builds with standard components
- Motherboard Support
- ITX, M-ATX
- Side Panel
- Mesh
- Max GPU Length
- 200-255mm
- Compatible Device
- CPU Cooler
- Dimensions
- 10.5 × 8 × 11.6 inches
View on Amazon: Jonsbo Compact Micro-ATX Mesh Case Affiliate link
The Jonsbo C6 is a compact micro-ATX case with mesh on all sides. It supports ITX and micro-ATX motherboards. The design allows for tool-free assembly of the upper cover and side panel. You can install up to three fans. The case fits CPUs up to 75mm tall and GPUs up to 255mm long. It includes a USB 3.0 and Type-C front port.
Pros
- Mesh panels on front, top, and bottom for airflow
- Tool-free access to upper cover and side panel
- Supports ITX and micro-ATX motherboards
- Front I/O includes USB 3.0 and Type-C
Cons
- Limited GPU clearance of 200 to 255mm
- CPU cooler height limit of 75mm
- No mention of a side window
Good fit if
- You need a small footprint for a micro-ATX build
- You want tool-free case access for easier building
- You prioritize airflow with mesh panels
Skip if
- You require a large graphics card over 255mm
- You use a tall CPU cooler over 75mm
- You want a full tower ATX case
Verdict: Jonsbo C6 Black Mesh Micro ATX Case fits users who need a compact, well-ventilated chassis for micro-ATX builds with standard-sized components.
Specifications side by side
| Spec | Jonsbo Mesh Micro-ATX Case | Jonsbo Compact Micro-ATX Mesh Case |
|---|---|---|
| Motherboard Support | MATX, MicroATX, ITX | ITX, M-ATX |
| Case Type | Micro ATX | not stated |
| Side Panel | not stated | Mesh |
| Radiator Support | 360mm | not stated |
| Max GPU Length | 400mm | 200-255mm |
| Compatible Device | not stated | CPU Cooler |
| Dimensions | 17.3 × 8.07 × 14.3 inches | 10.5 × 8 × 11.6 inches |
| Color | BLACK | BLACK |
| Model | D31 | not stated |
Frequently asked questions
Which case is better for a compact build?
The Jonsbo C6 is the better choice for compact builds. Its dimensions are 8 x 11.6 x 10.5 inches, making it significantly smaller than the D31. This smaller footprint is ideal for users who need a chassis that fits in tight spaces while still supporting micro-ATX motherboards and standard components.
How much space does the D31 take up?
The Jonsbo D31 has dimensions of 8.07 x 14.3 x 17.3 inches. This larger size provides more internal room for components compared to the C6. The extra height and length allow for better airflow and compatibility with larger graphics cards and cooling solutions in a micro-ATX form factor.
Does the C6 support ITX motherboards?
Yes, the Jonsbo C6 explicitly supports both ITX and micro-ATX motherboards. This flexibility allows you to build smaller systems using mini-ITX boards if desired. The D31 is primarily listed for micro-ATX support, so the C6 offers more versatility if you plan to use smaller form factor motherboards.
What is the main difference in size between the two?
The primary difference is the internal volume. The D31 is a mid-sized tower with a length of 17.3 inches. The C6 is a compact chassis with a length of only 10.5 inches. This makes the C6 much smaller, while the D31 offers more space for larger components.
Can I use a standard CPU cooler in the C6?
Yes, the Jonsbo C6 lists compatible devices including CPU coolers. Its compact design is intended for builds with standard-sized components. You should check your specific cooler height against the case's internal clearance to ensure it fits, but the case is designed to accommodate standard micro-ATX cooling solutions.
Which case is better for high-performance components?
The Jonsbo D31 is better for high-performance components. It offers a larger footprint to accommodate larger graphics cards and coolers. The D31 is designed for compact high-performance builds, providing the necessary space for powerful hardware that might not fit in the tighter confines of the smaller C6 chassis.
Are both cases available in black?
Yes, both cases are available in black. The Jonsbo D31 is listed as black, and the Jonsbo C6 is also listed as black. Both feature mesh panels for airflow, maintaining a consistent aesthetic while offering different sizes and internal layouts for your micro-ATX build.