Corsair RS120-R ARGB 120mm Reverse Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for corsair rs120 r argb 120mm pwm alternatives to find a fan that matches your specific build requirements. The Corsair RS120-R ARGB fan offers a reverse rotor design for visible intake lighting and strong static pressure for radiators. It uses a magnetic dome bearing and supports +5V ARGB control. These specs make it a reliable choice for builders who prioritize aesthetics and cooling performance through dense filters.
However, you might need different specifications, such as a different blade direction, color, or included accessories. Some users prefer standard forward airflow, while others need slim profiles for tight ITX cases. Others may want a complete kit with a remote or a distinct color scheme like pink. This list of 6 similar picks compares products whose specs overlap with the original. Each alternative addresses a specific need, from budget-friendly options to premium kits, ensuring you find the right fit for your case and motherboard setup.
Our top pick: Corsair RS120-R ARGB 120mm Reverse Fan.
How these fans compare to the RS120-R
EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
The EZDIY-FAB Moonlight fan kit offers a complete 6-pack solution, which is a significant difference from the single-unit Corsair RS120-R. While the Corsair focuses on reverse rotor design for intake visibility, the EZDIY-FAB provides a slim profile and includes a remote for manual control. This makes it a practical choice if you value included accessories and bulk lighting over high airflow performance. The Corsair delivers stronger static pressure for radiator cooling, whereas the EZDIY-FAB prioritizes aesthetic completeness and ease of setup for users who want a full case lighting kit without complex software integration.
Cooler Master MF120 Halo 120mm ARGB Fan
The Cooler Master MF120 Halo is a strong alternative for builders who need reliable static pressure for radiators, similar to the Corsair RS120-R. However, it uses a standard forward blade design rather than the reverse rotor found in the Corsair. This means the lighting is optimized for exhaust rather than intake visibility. Both fans support 5V ARGB and PWM control for adjustable speeds. The Cooler Master is a better pick if you do not require the specific reverse-rotor aesthetic, as it provides comparable airflow performance and customizable lighting for mesh chassis ventilation or standard cooling setups.
Cooler Master MF120 Halo Dual-Ring ARGB Fan
The Cooler Master MF120 Halo Dual-Ring fan distinguishes itself with a vibrant dual-ring ARGB lighting setup, offering a different visual style compared to the Corsair RS120-R's eight-LED configuration. Like the Corsair, it is a 120mm fan with ARGB support, but it lacks the reverse rotor design. This makes it less suitable for intake mounting if you want the lighting fully visible from the front. It is a solid choice for builders who prioritize visual impact and cable management over the specific intake lighting benefits and high static pressure performance of the Corsair RS120-R.
Vetroo 120mm Pink ARGB Fans 3-Pack
The Vetroo 120mm Pink ARGB fans cater to users seeking a distinct aesthetic, offering a pink color option that the white Corsair RS120-R does not provide. These fans come in a 3-pack, providing more units for the same form factor compared to the single Corsair fan. While the Vetroo fans offer basic ARGB sync, they lack the reverse rotor design and the high static pressure rating of the Corsair. This makes them a suitable choice for builds that prioritize color themes and value over advanced lighting customization and radiator cooling performance.
Ocypus Gamma F12 120mm ARGB Fan
The Ocypus Gamma F12 fan features a standard forward airflow design, contrasting with the reverse rotor of the Corsair RS120-R. This makes it better suited for exhaust mounting or cases where intake lighting visibility is not a priority. Both fans are 120mm ARGB models, but the Ocypus focuses on synchronized RGB effects and manageable cable chaining. The Corsair offers higher static pressure for radiators, while the Ocypus provides stable performance for users who value aesthetic lighting and standard airflow direction over the specific intake benefits of the Corsair design.
ID-COOLING 120mm Slim ARGB Fan
The ID-COOLING 120mm Slim ARGB fan is designed for tight spaces, with a height of 0.63 inches compared to the Corsair RS120-R's 0.98 inches. This slim profile makes it ideal for low-profile coolers or ITX builds where space is constrained. While the Corsair offers higher airflow and static pressure for standard case ventilation, the ID-COOLING fan sacrifices some performance for fit. It provides adequate lighting and airflow for general ventilation in tight cases, making it the better choice when height is the primary constraint rather than maximum cooling performance.
Quick picks
Our 7 picks
Corsair RS120-R ARGB 120mm Reverse Fan
Best for: Visible intake RGB and radiator cooling
- Fan Size
- 120mm
- Max Fan Speed
- 2100 RPM
- Max Airflow
- 65.8 CFM
- Static Pressure
- 2.81 mmH2O
- Connector Type
- PWM
- Bearing Type
- Magnetic Dome
View on Amazon: Corsair RS120-R ARGB 120mm Reverse Fan Affiliate link
The Corsair RS120-R is a 120mm reverse-rotor fan designed for clean intake aesthetics. It reaches 2,100 RPM with 65.8 CFM airflow and 2.81 mm H2O static pressure. The magnetic dome bearing supports long-term use. Eight +5V ARGB LEDs allow motherboard-controlled lighting. This fan suits builders who want visible RGB on intake mounts without sacrificing cooling performance.
Pros
- Reverse rotor design keeps lighting visible on intake mounts
- High static pressure of 2.81 mm H2O for radiators
- Magnetic dome bearing for durability
- Eight +5V ARGB LEDs per fan
Cons
- Requires compatible motherboard for ARGB control
- Sold as a single fan, not a multi-pack
- Limited to standard 120mm mounting size
Good fit if
- You want RGB visible on intake fans
- You need high static pressure for radiators
- You have a motherboard with +5V ARGB headers
Skip if
- You need a multi-pack of fans
- Your motherboard only supports 12V RGB
- You prefer non-RGB silent operation
Verdict: Corsair RS120-R ARGB 120mm PWM fits builders who need visible intake lighting and strong static pressure for radiators. It delivers reliable performance with a magnetic bearing and customizable eight-LED ARGB setup.
EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack)
Best for: complete 6-fan ARGB kits with remote
- Fan Size
- 120 mm
- Max Airflow
- 26.16 CFM
- Bearing Type
- Self-lubricated
- Lighting Type
- ARGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
View on Amazon: EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack) Affiliate link
This 6-pack of 120mm ARGB fans offers 26.16 CFM airflow with a slim 0.98-inch profile. You get a dedicated hub and 21-key remote for manual speed and lighting control. It syncs with 5V motherboard headers for ASUS, ASRock, Gigabyte, and MSI. The self-lubricated bearing and anti-vibration pads aim to keep noise low. This set suits builders who want a complete lighting solution with manual control.
Pros
- Includes 6 fans for comprehensive case coverage
- Comes with a fan hub and 21-key remote
- Syncs with 5V ARGB motherboard headers
- Slim 0.98-inch thickness fits tight spaces
Cons
- No software app for automated lighting effects
- Manual control only via remote and hub
- Lower airflow than many high-performance alternatives
Good fit if
- You want a complete 6-fan kit with remote
- You prefer manual control over software apps
- You need slim fans for tight cases
Skip if
- You require high airflow for heavy cooling
- You want automated lighting via software
- You need a single fan rather than a pack
Verdict: EZDIY-FAB Moonlight 120mm ARGB Fan 6 Pack provides a complete lighting kit with manual control, fitting users who value included accessories and slim profiles over high airflow or software integration.
Cooler Master MF120 Halo 120mm ARGB Fan
Best for: Radiators and mesh chassis ventilation with ARGB
- Fan Size
- 120mm
- Max Fan Speed
- 1,800 rpm
- Lighting Type
- 5V 3-Pin ARGB
- Connector Type
- 4-Pin
- Dimensions
- 0.98 × 4.72 × 4.72 inches
- Weight
- 7.05 ounces
View on Amazon: Cooler Master MF120 Halo 120mm ARGB Fan Affiliate link
The Cooler Master MF120 Halo is a 120mm case fan featuring dual-ring addressable RGB lighting. It uses a hybrid static pressure blade design suitable for radiators or mesh chassis. The fan speed adjusts dynamically between 650 rpm and 1,800 rpm via PWM control. You need a 5V 3-pin ARGB motherboard header or a compatible controller to activate the 24 individually controlled LEDs. It includes sound absorbing materials to reduce noise.
Pros
- Dual-ring addressable RGB with 24 individually controlled LEDs
- PWM speed control from 650 rpm to 1,800 rpm
- Hybrid static pressure blade design for airflow and resistance
- Sound absorbing materials for quieter operation
Cons
- Requires 5V 3-pin ARGB header, not standard 4-pin RGB
- May need a separate Gigabyte adapter cable for some motherboards
- Controller not included for ARGB lighting
Good fit if
- You have a motherboard with a 5V 3-pin ARGB header
- You need fans for CPU liquid radiators or mesh vents
- You want individually addressable lighting effects
Skip if
- You only have 12V 4-pin RGB headers
- You want a fan with an included controller
- You prefer fans that work without ARGB motherboards
Verdict: Cooler Master MF120 Halo ARGB 120mm Fan suits builders with 5V ARGB headers who need strong static pressure for radiators. It delivers customizable lighting and adjustable speeds for quiet operation.
Cooler Master MF120 Halo Dual-Ring ARGB Fan
Best for: dual-ring ARGB lighting builds
- Fan Size
- 120 mm
- Max Airflow
- 47.2 CFM ± 10%
- Static Pressure
- 1.6 mmH2O ± 10%
- Noise Level
- 30 dBA
- Lighting Type
- Addressable RGB
- Dimensions
- 4.72 × 4.72 × 0.98 inches
View on Amazon: Cooler Master MF120 Halo Dual-Ring ARGB Fan Affiliate link
The Cooler Master MF120 Halo ARGB fan features dual-ring addressable RGB lighting with 24 individually controlled LEDs. It delivers 47.2 CFM airflow and 1.6 mmH2O static pressure. The design includes noise reduction materials for operation between 6 and 30 dBA. A smart sensor protects against cable jams. You get secure ARGB connector clips for motherboard compatibility.
Pros
- Dual-ring addressable RGB lighting with 24 LEDs
- 47.2 CFM max airflow for case cooling
- 1.6 mmH2O static pressure for radiators
- Smart fan sensor prevents jam damage
- Includes ARGB connector clips for secure connection
Cons
- Maximum noise level reaches 30 dBA
- No mention of included speed controllers
- Single fan unit in this listing
Good fit if
- You want visible dual-ring ARGB lighting
- You need secure ARGB connector clips
- You require jam protection sensors
Skip if
- You need silent operation below 20 dBA
- You prefer a multi-pack value
- You want a slim 15mm profile
Verdict: The Cooler Master MF120 Halo ARGB Fan suits builders prioritizing vibrant dual-ring lighting and reliable airflow. It fits cases where visual impact and cable protection matter more than ultra-low noise.
Vetroo 120mm Pink ARGB Fans 3-Pack
Best for: Pink-themed PC builds with 5V ARGB headers
- Fan Size
- 120mm
- Connector Type
- PWM
- Bearing Type
- Hydraulic
- Lighting Type
- 5V 3-Pin ARGB
- Dimensions
- 2.8 × 5.7 × 10.5 inches
- Weight
- 5.29 ounces
View on Amazon: Vetroo 120mm Pink ARGB Fans 3-Pack Affiliate link
The Vetroo 3-Pack ARGB-120 Pink fans offer 120mm airflow with hydraulic bearings rated for 50,000 hours. You get 5V 3-pin ARGB sync and PWM speed control. The pink color stands out against standard black builds. Eight vibration pads reduce noise. This set suits builders who want a specific aesthetic without complex software.
Pros
- 5V 3-pin ARGB motherboard sync
- Hydraulic bearings for 50,000 hour life
- Pink color option
- Eight vibration rubber pads
Cons
- Only 5V 3-pin ARGB support
- No dedicated software control mentioned
- Limited to pink color choice
Good fit if
- You want a pink accent in your build
- You have a 5V 3-pin ARGB header
- You prefer simple motherboard sync
Skip if
- You need 12V 4-pin RGB support
- You require advanced lighting software
- You prefer standard black fans
Verdict: Vetroo 120mm Pink ARGB Case Fan fits users seeking a distinct pink aesthetic with basic ARGB sync. It is a solid choice for builds that prioritize color over advanced lighting customization.
Ocypus Gamma F12 120mm ARGB Fan
Best for: Standard forward airflow builds with ARGB focus
- Fan Size
- 120mm
- Max Fan Speed
- 1600RPM
- Connector Type
- 4-Pin PWM
- Bearing Type
- Hydraulic Bearing
- Lighting Type
- ARGB
- Blade Direction
- Forward
View on Amazon: Ocypus Gamma F12 120mm ARGB Fan Affiliate link
The Ocypus Gamma F12 is a 120mm case fan featuring a 9-blade design and 24 ARGB LEDs. It uses a 4-pin PWM connector for speed control and supports daisy-chaining up to three units. The forward blade configuration suits standard intake or exhaust mounts. You will appreciate the synchronized lighting and vibration-damping pads if you prioritize aesthetic consistency and stable operation in your build.
Pros
- 24 ARGB LEDs with synchronized side frame lighting
- 9-blade design for optimized airflow efficiency
- 4-pin PWM control for speed adjustment
- Daisy-chain support for up to 3 fans
Cons
- Forward blade direction limits reverse-mount compatibility
- Daisy-chain limit restricts expansion to 3 fans
- No mention of motherboard software compatibility details
Good fit if
- You want synchronized ARGB lighting effects
- You need standard forward airflow direction
- You plan to chain multiple fans together
Skip if
- You require reverse blade airflow direction
- You need support for more than 3 chained fans
- You prefer a slim 15mm profile fan
Verdict: The Ocypus Gamma F12 ARGB 120mm Fan fits builders seeking aesthetic lighting with standard forward airflow. It delivers stable performance for users who value synchronized RGB effects and manageable cable chaining.
ID-COOLING 120mm Slim ARGB Fan
Best for: low-profile coolers and tight ITX builds
- Fan Size
- 120mm
- Max Fan Speed
- 2, 000 rpm
- Max Airflow
- 54.6CFM
- Noise Level
- 13.8~31.2dB(A)
- Connector Type
- PWM
- Lighting Type
- 5V 3PIN ARGB
View on Amazon: ID-COOLING 120mm Slim ARGB Fan Affiliate link
This is a 120mm case fan with a slim 15mm profile. It uses PWM for speed control between 500 and 2,000 rpm. The fan delivers up to 54.6 CFM of airflow. It features 5V 3-pin ARGB lighting for motherboard sync. The low height makes it suitable for tight spaces like HTPCs or low-profile coolers.
Pros
- 15mm slim thickness for space-constrained builds
- PWM control from 500 to 2,000 rpm
- 5V 3-pin ARGB sync support
- Airflow up to 54.6 CFM
Cons
- Slim 15mm height limits total airflow potential
- Requires 5V 3-pin ARGB header
- No included speed controller hub
Good fit if
- You need a fan for a low-profile CPU cooler
- You have an HTPC or ITX case with tight clearance
- You want ARGB lighting that syncs with your motherboard
Skip if
- You require maximum static pressure for dense radiators
- Your motherboard only supports 12V 4-pin RGB
- You need a standard 25mm thick fan for better airflow
Verdict: ID-COOLING 120mm Slim ARGB Fan fits users who need to fit lighting and airflow into tight spaces like low-profile coolers. It provides adequate performance for general case ventilation where height is the main constraint.
Specifications side by side
| Spec | Corsair RS120-R ARGB 120mm Reverse Fan | EZDIY-FAB Moonlight 120mm ARGB Fans (6-Pack) | Cooler Master MF120 Halo 120mm ARGB Fan | Cooler Master MF120 Halo Dual-Ring ARGB Fan | Vetroo 120mm Pink ARGB Fans 3-Pack | Ocypus Gamma F12 120mm ARGB Fan | ID-COOLING 120mm Slim ARGB Fan |
|---|---|---|---|---|---|---|---|
| Fan Size | 120mm | 120 mm | 120mm | 120 mm | 120mm | 120mm | 120mm |
| Max Fan Speed | 2100 RPM | not stated | 1,800 rpm | not stated | not stated | 1600RPM | 2, 000 rpm |
| Max Airflow | 65.8 CFM | 26.16 CFM | not stated | 47.2 CFM ± 10% | not stated | not stated | 54.6CFM |
| Static Pressure | 2.81 mmH2O | not stated | not stated | 1.6 mmH2O ± 10% | not stated | not stated | not stated |
| Noise Level | not stated | not stated | not stated | 30 dBA | not stated | not stated | 13.8~31.2dB(A) |
| Connector Type | PWM | not stated | not stated | not stated | PWM | 4-Pin PWM | PWM |
| Bearing Type | Magnetic Dome | Self-lubricated | not stated | not stated | Hydraulic | Hydraulic Bearing | not stated |
| Lighting Type | +5V ARGB | ARGB | 5V 3-Pin ARGB | Addressable RGB | 5V 3-Pin ARGB | ARGB | 5V 3PIN ARGB |
| Blade Direction | Reverse | not stated | not stated | not stated | not stated | Forward | not stated |
| Lighting | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Dimensions | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 0.98 × 4.72 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 2.8 × 5.7 × 10.5 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.63 inches |
| Weight | 1.19 pounds | not stated | 7.05 ounces | 6.35 ounces | 5.29 ounces | 6.7 ounces | 3.53 ounces |
| Size | 4.72 x 4.72 x 0.98 inches | 6 Pack | 120mm MF120 | 120 | 120mm-HDB | Gamma F12 Infinity Mirror - Forward Blade - 1 Pack | not stated |
| Color | White | not stated | MF120 HALO | ARGB | Pink | Black ARGB | black |
| Model | CO-9050197-WW | US-rgb slim fan with hub X-5P | MFL-B2DN-18NPA-R1 | MFL-B2DN-18NPA-R1 | SA-120 | Gamma F12 Elite BK ARGB | NO-12015-XT-ARGB |
If you need a liquid cooler instead, you can compare corsair nautilus 240 rs argb alternatives for your radiator setup.
Frequently asked questions
Are all these alternatives 120mm fans like the Corsair RS120-R?
Yes, every option listed is a 120mm fan. This standard size ensures compatibility with most mid-tower and full-tower PC cases. You can swap the Corsair RS120-R for any of these models without changing your case layout or radiator mounts.
Do these fans support ARGB lighting sync?
Most options here feature ARGB lighting for customizable effects. The Cooler Master MF120 Halo and Vetroo Pink fans connect to 5V ARGB headers. The EZDIY-FAB kit includes a hub for manual control. This allows you to match your build's aesthetic without extra controllers.
Which alternative is best for radiator cooling?
The Corsair RS120-R and Cooler Master MF120 Halo are designed for high static pressure. These specs make them ideal for pushing air through dense radiator fins. The RS120-R also offers a reverse design for better intake visibility while maintaining strong cooling performance.
Is there a slimmer option for tight spaces?
The ID-COOLING 120mm Slim ARGB Fan is only 0.63 inches thick. This profile fits low-profile CPU coolers and compact ITX builds where standard 1-inch fans are too tall. It provides adequate airflow and ARGB lighting for constrained interiors.
Can I get a complete kit instead of a single fan?
The EZDIY-FAB Moonlight comes as a 6-pack with a hub. This kit is ideal if you need to fill multiple intake or exhaust positions at once. It offers a complete lighting solution with manual control, saving you from buying individual units separately.
Do any fans have unique lighting designs?
The Cooler Master MF120 Halo Dual-Ring features a distinct dual-ring ARGB pattern. The Ocypus Gamma F12 uses an infinity mirror effect for deep visual impact. These designs offer more visual complexity than the standard eight-LED setup found on the Corsair RS120-R.
What color options are available besides white?
You can choose from several colors beyond the white Corsair RS120-R. The Vetroo fan offers a distinct pink option. The Ocypus Gamma F12 comes in black ARGB. The ID-COOLING fan is also available in black. These colors help match specific build themes.
How do the weights of these fans compare?
Weights vary based on materials and included accessories. The EZDIY-FAB 6-pack is heaviest due to the quantity. Single fans like the ID-COOLING Slim weigh just 3.53 ounces. The Corsair RS120-R weighs 1.19 pounds, which may include packaging or bulk shipping weight.