15 Best Case Fans with RGB, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right case fan with RGB setup depends on your enclosure size, connector types, and cooling requirements. We compared 15 options strictly using the specifications published on their listings.
The Thermaltake Commander F6 6-Channel Fan Controller leads the list because it provides manual six-channel voltage management alongside thermal sensors and an RGB LCD display for cases with an available 5.25-inch bay. This guide helps you choose the proper fan dimensions, connector styles, and airflow setup for your PC chassis.
Quick picks
The best fit for you
- You need manual fan speed and temperature control Thermaltake Commander F6 6-Channel Fan Controller This unit features a six-channel fan controller with an RGB LCD display and thermal sensors.
- You need tiny fans for micro electronics projects WINSINN 25mm Micro RGB Fan 4-Pack The fans measure 25mm and run on a 24V 2-pin connector.
- You want white 140mm fans for larger chassis mounts Thermaltake SWAFAN EX14 RGB White 140mm Fan 3-Pack These 140mm fans feature a white finish and thirty RGB LEDs per unit.
- You need a compact fan for an 80mm mount Hilitand 80mm ARGB PWM Fan This fan features an 80mm size with ARGB lighting and PWM control.
Our 15 picks
Thermaltake Commander F6 6-Channel Fan Controller
Best for: manual multi-channel fan speed and temperature monitoring
- Lighting
- RGB (what this guide is about)
- Dimensions
- 7 × 4.5 × 3 inches
View on Amazon: Thermaltake Commander F6 6-Channel Fan Controller
The Thermaltake Commander F6 RGB 6-Channel Fan Controller is a single 5.25-inch drive bay unit featuring an RGB LCD screen and six individual voltage control knobs. You can monitor system temperatures using its six included thermal sensors and protect hardware with the built-in short circuit warning alarm. It also supports up to two Lumi LED strips. This setup suits you if you want dedicated physical speed and thermal control directly on your chassis.
Pros
- Six individual voltage control knobs
- RGB LCD screen with multicolored display
- Six included temperature sensors
- Warning alarm with short circuit protection
- Compatible with up to two Lumi LED strips
Cons
- Requires an external 5.25-inch drive bay
- Fans are not included in the package
Good fit if
- You have an open 5.25-inch bay in your PC case.
- You want physical dial knobs to adjust individual fan voltages.
- You need real-time thermal readings from six distinct sensors.
Skip if
- You have a modern case lacking a 5.25-inch drive bay.
- You need cooling fans included in the box.
Verdict: Thermaltake Commander F6 RGB 6-Channel Fan Controller provides manual six-channel voltage management alongside thermal sensors and an RGB LCD display for cases with an available 5.25-inch bay. It gives you direct physical control over your cooling configuration from the front panel.
upHere 120mm RGB Case Fan 3-Pack
Best for: triple-fan 120mm chassis cooling setups
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Bearing Type
- Hydraulic
- Lighting Type
- RGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
This package gives you three 120mm upHere RGB cooling fans designed for standard PC chassis mounts. Each fan features a hydraulic bearing and integrated rubber anti-vibration pads to reduce operating noise. Power and illumination run through a 6-pin interface rather than separate fan headers. You will find this pack suitable if you need three matched 120mm intake or exhaust fans with built-in RGB lighting for your system build.
Pros
- Includes three 120mm fans in a single pack
- Hydraulic bearings designed for smooth operation
- Built-in rubber pads reduce operational vibration
- Supports both intake and exhaust mounting orientations
Cons
- Uses a 6-pin interface instead of standard 3-pin or 4-pin motherboard headers
- No remote control or standalone controller listed in the specifications
Good fit if
- You need a three-pack of 120mm RGB fans for chassis airflow.
- You want hydraulic bearings and rubber vibration pads built into the frames.
Skip if
- You require standard 3-pin or 4-pin motherboard fan headers.
- You need fans that run without specialized 6-pin connection hardware.
Verdict: upHere 120mm RGB Case Fans 3-Pack delivers three 120mm hydraulic-bearing cooling fans with rubber pads and RGB lighting for your PC enclosure. Its 6-pin interface combines power and lighting into one connector, though it requires compatible hardware.
DS leddess 120mm 6-Pack RGB Fans
Best for: full-case builds needing remote-controlled RGB cooling
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Connector Type
- 6-pin
- Lighting Type
- RGB
- Compatible Device
- Radiator, CPU Cooler
- Dimensions
- 4.72 × 4.72 × 0.98 inches
This package gives you six 120mm RGB case fans bundled with an RF wireless remote for adjusting lighting patterns and speeds. Each fan measures standard 25mm thick and includes eight anti-vibration silicone pads across the frame corners. These units rely on proprietary 6-pin connectors designed exclusively for compatible multi-fan hub kits. If you need to populate six fan mounts across your chassis or radiators at once, this bundle fits.
Pros
- Includes RF wireless remote for pattern and speed adjustments
- Six 120mm fans included in one package
- Eight silicone vibration-damping pads on each frame
- Compatible with case mounts, CPU coolers, and radiators
Cons
- Requires a proprietary 6-pin connection kit
- Cannot be used independently without a compatible controller
Good fit if
- You need six matching 120mm RGB fans to fill a multi-slot chassis.
- You prefer adjusting lighting patterns and fan speeds via a wireless remote.
- You plan to use a compatible 6-pin controller kit.
Skip if
- You need standard 3-pin or 4-pin PWM motherboard connections.
- You want standalone fans that operate without a specialized hub.
Verdict: DS leddess 120mm RGB Fans 6-Pack with Remote delivers complete multi-fan airflow with dedicated wireless lighting controls. It serves broad chassis coverage as long as you accommodate the proprietary 6-pin connection requirement.
WINSINN 25mm Micro RGB Fan 4-Pack
Best for: micro enclosures and 24V DIY cooling
- Lighting
- RGB (what this guide is about)
- Fan Size
- 25mm
- Max Fan Speed
- 7000PRM
- Max Airflow
- 1.35CFM
- Static Pressure
- 2.32mmH₂O
- Noise Level
- 18.8dBA
This 4-pack of micro fans provides RGB lighting for compact electronics and tight spaces. Each 25mm by 25mm by 10mm fan runs on a 24V DC power source using a 2-pin XH2.54 connector. You get up to 7000 RPM, delivering 1.35 CFM of airflow at 18.8 dBA noise output. It suits you if you need localized cooling inside tiny enclosures, custom Raspberry Pi builds, small PC chassis, or 3D printers.
Pros
- Compact 25mm by 25mm by 10mm size fits micro electronics
- Quiet 18.8 dBA noise rating at 7000 RPM
- Hydraulic bearing rated for 35,000 operating hours
- Includes four 24V fans with 11.8-inch lead wires
Cons
- Requires a 24V DC connection instead of standard 12V PC fan headers
- 2-pin connector lacks PWM control and addressable lighting adjustments
- Low 1.35 CFM airflow restricted to micro spot cooling
Good fit if
- You need micro 25mm fans to ventilate tiny chassis or Raspberry Pi enclosures.
- You have a dedicated 24V DC power supply with XH2.54 ports.
- You want quiet spot cooling with static RGB illumination.
Skip if
- You require standard 120mm or 140mm PC case fan mounts.
- You need 12V 3-pin or 4-pin PWM motherboard headers.
Verdict: WINSINN 25mm Micro RGB Fan 4-Pack delivers localized 24V cooling and integrated RGB lighting for tight DIY chassis and micro electronics. Its miniature 25mm size and 2-pin XH2.54 interface target small specialized hardware rather than standard desktop PC mounts.
Cooler Master MasterFan MF120 Halo White
Best for: white PC builds needing dual-ring ARGB lighting
- Lighting
- RGB (what this guide is about)
- Max Airflow
- 47.2 CFM ± 10%
- Static Pressure
- 1.6 mmH2O ± 10%
- Noise Level
- 6 - 30 dBA
- Lighting Type
- ARGB
- Dimensions
- 4.72 × 4.72 × 0.98 inches
This Cooler Master 120mm fan delivers case ventilation with dual-loop lighting from 24 addressable RGB LEDs. It pushes up to 47.2 CFM of airflow and 1.6 mmH2O air pressure, operating between 6 and 30 dBA. You will find it suits your setup if you want synchronized motherboard lighting alongside built-in jam protection sensors that safeguard internal cables.
Pros
- Dual-loop lighting featuring 24 individually controlled ARGB LEDs
- Smart fan sensor provides jam protection against snagged cables
- Delivers up to 47.2 CFM airflow and 1.6 mmH2O air pressure
- Compatible with ASUS Aura, ASRock RGB, and MSI RGB software
Cons
- Sound output reaches up to 30 dBA at higher speeds
- Airflow rating of 47.2 CFM is moderate for a 120mm fan
- Single-fan package does not include a separate hardware controller
Good fit if
- You want dual-ring addressable RGB lighting with 24 LEDs.
- You connect lighting directly to compatible ARGB motherboard software.
- You need a 120mm white fan with built-in cable jam protection.
Skip if
- You need airflow ratings significantly higher than 47.2 CFM.
- You require maximum acoustic output to stay below 30 dBA.
Verdict: Cooler Master MasterFan MF120 Halo White delivers balanced 47.2 CFM cooling performance with dual-ring ARGB illumination for desktop chassis. Its jam detection sensors and broad motherboard software compatibility make it a practical choice for white builds.
Shaking Tank MasterFan Halo 120mm ARGB Fans
Best for: dual-ring addressable RGB setups
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Lighting Type
- Addressable Gen 2 RGB
- Compatible Device
- Radiator
- Dimensions
- 4.72 × 4.72 × 0.98 inches
This three-pack includes 120mm white chassis fans suited for case airflow and radiators. Each fan features dual-loop Addressable Gen 2 RGB lighting with 24 individually controlled LEDs arranged across two rings. Built-in sound-absorbing materials lower operating noise, while a smart jam-protection sensor stops the blades if cables catch. Motherboard software support covers Asus Aura, ASRock RGB, and MSI RGB systems, making this set a direct fit if you want synchronized multi-ring lighting.
Pros
- 24 individually controlled Addressable Gen 2 RGB LEDs split into two rings
- Certified compatible with Asus Aura, ASRock RGB, and MSI RGB software
- Smart fan sensor provides jam protection against snagged cables
- Hybrid blade design combines air balance and wave shapes for radiator compatibility
Cons
- No standalone physical remote control listed
- Gigabyte RGB Fusion software support is not explicitly listed
Good fit if
- You want dual-loop RGB lighting with 24 addressable LEDs per fan.
- You use an Asus Aura, ASRock RGB, or MSI RGB motherboard header.
- You need 120mm fans that support radiator mounting.
Skip if
- You need fans larger than standard 120mm mounts.
- You require a handheld remote control for lighting adjustments.
Verdict: Shaking Tank MasterFan MF120 Halo 3-Pack White Fans provide dual-ring Addressable Gen 2 RGB illumination with integrated jam protection for 120mm mounts. The package gives you certified sync support across Asus, ASRock, and MSI motherboard platforms.
upHere 120mm RGB Case Fan 5-Pack
Best for: multi-fan airflow in 6-pin setups
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Bearing Type
- Hydraulic
- Lighting Type
- RGB
- Dimensions
- 4.72 × 0.98 × 4.72 inches
- Weight
- 0.32 ounces
The upHere 120mm RGB Case Fan 5-Pack gives you five 120mm fans designed for high airflow in standard PC cases. Each unit features RGB lighting, rubber vibration pads, and a hydraulic bearing for quiet operation. The fans utilize a 6-pin interface for lighting and power delivery. This multi-pack suits you if you need to outfit intake and exhaust mounts across your case simultaneously, provided your system accommodates 6-pin fan connections.
Pros
- Includes five 120mm RGB fans
- Hydraulic bearing for reduced operating noise
- Integrated rubber pads to dampen vibrations
- Supports two-way intake and exhaust installation
Cons
- Requires a 6-pin interface rather than standard motherboard headers
- No fan controller or remote listed in the specifications
Good fit if
- You want a matching set of five 120mm RGB fans for intake and exhaust.
- You want hydraulic bearing fans with rubber pads to reduce vibration.
- You have compatible 6-pin connections available for fan power and lighting.
Skip if
- You require standard 3-pin or 4-pin motherboard headers.
- You need an included fan controller or remote.
Verdict: upHere 120mm RGB Case Fan 5-Pack offers high-airflow cooling and vibration-damping rubber pads across five RGB units. Its 6-pin interface restricts connector compatibility, making it practical only for builds set up for that specific pin type.
DS leddess 120mm Static RGB Case Fans (6-Pack)
Best for: full-case static RGB cooling via Molex power
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Connector Type
- Molex
- Lighting Type
- Static RGB LED
- Compatible Device
- Radiator, CPU Cooler
- Dimensions
- 4.72 × 0.98 × 4.72 inches
View on Amazon: DS leddess 120mm Static RGB Case Fans (6-Pack)
This six-pack of 120mm DS leddess case fans provides basic illumination and airflow for mid-tower and full-tower PC builds. Each fan features eight static RGB LEDs and connects directly to your power supply using standard Molex connectors. Sized at 120mm by 25mm, they fit standard chassis mounts, radiators, and CPU coolers. You get a simple cooling setup if you want static lighting without configuring motherboard RGB headers or software.
Pros
- Includes six 120mm fans in a single kit
- Eight integrated RGB LEDs per fan unit
- Powered via standard Molex power supply connectors
- Compatible with radiator and CPU cooler mounting
Cons
- Uses Molex connectors without PWM motherboard speed control
- Static RGB lighting lacks addressable modes or software synchronization
Good fit if
- You need a six-fan bundle to fill all mounts in a mid-tower or full-tower case.
- You want simple Molex power without occupying motherboard fan headers.
- You prefer static RGB lighting without installing lighting software.
Skip if
- You require addressable ARGB lighting with motherboard software control.
- You want 4-pin PWM connections for custom fan speed curves.
Verdict: DS leddess 120mm Static RGB Case Fans (6-Pack) deliver straightforward chassis airflow and multi-fan lighting via direct Molex power.
Thermaltake SWAFAN EX14 RGB White 140mm Fan 3-Pack
Best for: white PC builds needing 140mm RGB fans
- Lighting
- RGB (what this guide is about)
- Fan Size
- 140mm
- Lighting Type
- RGB
- Dimensions
- 19.7 × 19.7 × 11 inches
- Weight
- 3.17 pounds
View on Amazon: Thermaltake SWAFAN EX14 RGB White 140mm Fan 3-Pack
The Thermaltake SWAFAN EX14 RGB White 3-Pack delivers three 140mm case fans with built-in RGB lighting. You get white frames equipped with TT RGB PLUS lighting featuring thirty LEDs per unit. These 12V fans require 140mm mounting points inside your PC case. This multi-pack suits you if you build a white-themed system needing larger 140mm airflow mounts and dedicated RGB illumination across multiple fan locations.
Pros
- Three 140mm RGB fans included in pack
- Thirty LEDs per fan with TT RGB PLUS support
- Standard 12V operation
- White frame finish
Cons
- Requires 140mm fan mounting locations
- White color finish limits pairing with all-black chassis designs
Good fit if
- You want three 140mm RGB fans in one package.
- You build a PC with a white color scheme.
- You have chassis mounts sized for 140mm fans.
Skip if
- You have a PC chassis restricted to 120mm mounting slots.
- You need black fans to match dark internal hardware.
Verdict: Thermaltake SWAFAN EX14 RGB White 3-Pack provides three 140mm RGB cooling fans tailored for larger case mounts and white-themed builds. It delivers thirty LEDs per fan along with standard 12V operation.
Thermaltake CT120 120mm RGB Fan 2-Pack
Best for: clean cable routing in dual-fan setups
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Max Fan Speed
- 2000 RPM
- Bearing Type
- Hydraulic Bearing
- Dimensions
- 7.6 × 5.5 × 2.4 inches
- Weight
- 12.8 ounces
The Thermaltake CT120 is a 2-pack of 120mm RGB cooling fans built with PWM control and hydraulic bearings. It operates at speeds up to 2000 RPM to balance airflow and static pressure using a 7-blade design. A daisy-chain cable setup allows you to link fans together to save motherboard ports and manage wiring easily. This kit suits you if you need reliable chassis cooling with minimal cable clutter.
Pros
- PWM control supports speeds up to 2000 RPM
- Daisy-chain cable design connects fans using fewer ports
- Hydraulic bearing engineered for quiet operation
- Anti-vibration mounting system on a solid frame
- 7-blade layout designed for airflow and air pressure
Cons
- Pack includes only two fans
- Exact CFM airflow and decibel ratings are not specified
Good fit if
- You need PWM-controlled fans capable of reaching 2000 RPM.
- You want daisy-chain wiring to reduce cable clutter across fan headers.
- You prefer hydraulic bearings paired with anti-vibration mounts.
Skip if
- You need a three-fan pack to fill all intake brackets at once.
- You require published decibel levels before purchasing.
Verdict: Thermaltake CT120 120mm RGB Fan 2-Pack delivers up to 2000 RPM speeds with hydraulic bearings and simplified daisy-chain cabling. It is a solid cooling choice if you want tidy cable management across two fan mounts.
AsiaHorse COSMIQ 120mm RGB Fan 3-Pack
Best for: clean daisy-chained builds needing 3-pin ARGB
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Max Fan Speed
- 2000 RPM
- Max Airflow
- 68.5 CFM
- Static Pressure
- 2.05mmH₂O
- Noise Level
- 29.2 dB(A)
The AsiaHorse COSMIQ 120mm RGB Fan 3-Pack provides case ventilation with infinity mirror lighting and interlocking daisy-chain wiring. It operates from 800 to 2,000 RPM via PWM, delivering up to 68.5 CFM of airflow and 2.05 mmH₂O static pressure. The package includes an independent controller and connects using a standard 5V 3-pin ARGB header. This setup suits builders wanting high airflow and unified lighting with minimal cable clutter inside their PC chassis.
Pros
- Interlocking daisy-chain connection reduces internal cabling
- Airflow up to 68.5 CFM with 2.05 mmH₂O static pressure
- PWM speed range spanning 800 to 2,000 RPM
- Dedicated controller included with 8 sound-reactive lighting modes
Cons
- Maximum operational noise reaches 29.2 dB(A) at 2,000 RPM
- Requires a 5V 3-pin addressable header for motherboard synchronization
Good fit if
- You want interlocking daisy-chain fans to simplify case cable management.
- You need up to 2.05 mmH₂O static pressure for radiator or case intake airflow.
- You have a motherboard with an available 5V 3-pin ARGB header.
Skip if
- You only have 12V 4-pin RGB headers on your motherboard.
- You require ultra-low noise below 25 dB(A) at maximum operational speeds.
Verdict: AsiaHorse COSMIQ 120mm RGB Fan 3-Pack delivers strong 68.5 CFM airflow and tidy daisy-chain cabling for ATX and MATX builds. Its 5V 3-pin ARGB sync and included controller provide versatile lighting control without routing excessive wires.
Corsair iCUE Link QX120 RGB 120mm Triple Pack
Best for: clean cable management in RGB builds
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Max Fan Speed
- 2,400 RPM
- Max Airflow
- 63.1 CFM
- Static Pressure
- 3.8mm-H2O
- Bearing Type
- Magnetic Dome
View on Amazon: Corsair iCUE Link QX120 RGB 120mm Triple Pack
This triple-pack of 120mm PWM fans includes an iCUE Link System Hub and bridge connectors to link units with minimal cabling. Each fan features 34 RGB LEDs across two zones, spins from 480 to 2,400 RPM, and reaches 63.1 CFM airflow with 3.8 mm-H2O static pressure. You get a Magnetic Dome bearing and Zero RPM mode, making it suitable if you want high-pressure cooling and clean cable routing.
Pros
- Up to 63.1 CFM airflow and 3.8 mm-H2O static pressure
- 34 RGB LEDs across two distinct lighting zones per fan
- Cable-free daisy chaining with included bridge connectors and iCUE Link System Hub
- PWM range from 480 to 2,400 RPM with Zero RPM silent mode
Cons
- Requires the proprietary iCUE Link ecosystem and hub rather than standard motherboard headers
- Lowest active spinning speed is 480 RPM outside of Zero RPM mode
Good fit if
- You want to daisy-chain fans without loose cables using modular bridge connectors.
- You need high static pressure up to 3.8 mm-H2O along with a Zero RPM idle profile.
Skip if
- You prefer connecting lighting directly to standard 5V ARGB motherboard headers.
- You require 140mm mounting sizes for your specific case setup.
Verdict: Corsair iCUE Link QX120 120mm RGB Triple Pack delivers high static pressure and dual-zone lighting while drastically cutting case clutter with its modular bridge connectors. It is a solid choice if you plan to build inside Corsair's unified hub ecosystem.
Corsair iCUE Link RX120 RGB Triple Pack
Best for: radiator cooling requiring high static pressure
- Lighting
- RGB (what this guide is about)
- Fan Size
- 120mm
- Max Fan Speed
- 2,100 RPM
- Max Airflow
- 74.2 CFM
- Static Pressure
- 4.38mm-H2O
- Bearing Type
- Magnetic Dome Bearing
This triple pack provides three 120mm PWM fans designed for high-resistance cooling setups. Each fan delivers up to 74.2 CFM of airflow and 4.38 mm-H2O static pressure at speeds reaching 2,100 RPM. With integrated RGB lighting and bridge connectors, you link the units together into one bank powered through a single hub cable. It suits you if you want concentrated radiator airflow and minimal cable clutter inside your PC chassis.
Pros
- High static pressure rating of 4.38 mm-H2O
- Airflow up to 74.2 CFM with PWM control up to 2,100 RPM
- Bridge connectors link fans together with one hub cable
- Liquid crystal polymer blades reinforced with glass fiber
Cons
- Requires the proprietary iCUE Link System Hub ecosystem
- Fixed 120mm size does not fit native 140mm fan locations
Good fit if
- You need high static pressure for dense liquid-cooling radiators.
- You want to connect multiple fans using a single hub cable to reduce wire clutter.
Skip if
- You prefer standard motherboard 4-pin fan headers instead of a dedicated hub.
- You need 140mm case fans for your chassis mounting positions.
Verdict: Corsair iCUE Link RX120 RGB Triple Pack delivers high static pressure and strong airflow through a single-cable bridge connection system. It provides targeted cooling performance and organized cable management for your build.
Vetroo 140mm White ARGB Fan
Best for: White cases needing 140mm ARGB cooling
- Lighting
- RGB (what this guide is about)
- Fan Size
- 140mm
- Connector Type
- PWM
- Bearing Type
- Hydraulic Bearing
- Lighting Type
- 5V 3PIN ARGB
- Dimensions
- 5.51 × 5.51 × 5.51 inches
The Vetroo 140mm White ARGB Fan provides chassis cooling using a nine-blade layout and a hydraulic bearing. It mounts into standard 140mm fan brackets and connects directly to a 5V 3-pin addressable RGB motherboard header without needing a proprietary hub. Fan motor power connects separately to your power supply. This single white unit suits you if you want motherboard-synced lighting and quiet operation backed by rubber corner pads.
Pros
- Standard 5V 3-pin ARGB motherboard synchronization
- Hydraulic bearing with integrated rubber dampening pads
- Nine-blade impeller designed for airflow
- All-white frame and blade design
Cons
- Requires separate power supply connection for fan speed
- Includes no dedicated hardware lighting controller
- 140mm frame does not fit standard 120mm mounts
Good fit if
- You have an open 140mm fan mount in your case.
- You want lighting synchronized via a 5V 3-pin motherboard header.
- You are assembling an all-white computer build.
Skip if
- You only have 120mm fan mounting points available.
- You lack a 5V 3-pin addressable header on your motherboard.
Verdict: Vetroo 140mm White ARGB Fan delivers straightforward addressable lighting and hydraulic bearing cooling for cases with 140mm mounts. It eliminates proprietary hubs by connecting directly to standard 5V motherboard headers.
Hilitand 80mm ARGB PWM Fan
Best for: compact cases requiring 80mm ARGB cooling
- Lighting
- RGB (what this guide is about)
- Fan Size
- 80mm
- Max Fan Speed
- 2500 RPM
- Max Airflow
- 26.5 CFM
- Noise Level
- 25.5 dBA
- Bearing Type
- MFDB Fluid Dynamic
The Hilitand 80mm ARGB PWM Fan gives you a compact cooling option for small chassis mounts, CPU coolers, or radiators. It runs from 800 to 2,500 RPM via PWM control, delivering up to 26.5 CFM of airflow at a maximum noise level of 25.5 dBA. It uses a 5V addressable RGB header for motherboard synchronization and includes silicone vibration pads at the corners.
Pros
- Wide 800 to 2,500 RPM PWM operating range
- Fluid dynamic bearing rated for over 10,000 hours
- Standard 5V ARGB motherboard synchronization
- Silicone corner pads reduce chassis vibration
Cons
- Airflow tops out at 26.5 CFM
- Fixed 72mm hole spacing limits fit to 80mm mounts
Good fit if
- You need an 80mm fan for a compact case or cooler
- You want addressable RGB lighting synced via a 5V header
- You require PWM dynamic speed control up to 2,500 RPM
Skip if
- You have standard 120mm or 140mm mounting locations
- You need higher airflow volume than 26.5 CFM
Verdict: Hilitand 80mm ARGB PWM Fan delivers controllable speeds and addressable lighting for compact enclosures requiring 80mm cooling. It balances small-form-factor airflow with silicone-damped mounting and motherboard ARGB control.
Specifications side by side
| Spec | Thermaltake Commander F6 6-Channel Fan Controller | upHere 120mm RGB Case Fan 3-Pack | DS leddess 120mm 6-Pack RGB Fans | WINSINN 25mm Micro RGB Fan 4-Pack | Cooler Master MasterFan MF120 Halo White | Shaking Tank MasterFan Halo 120mm ARGB Fans | upHere 120mm RGB Case Fan 5-Pack | DS leddess 120mm Static RGB Case Fans (6-Pack) | Thermaltake SWAFAN EX14 RGB White 140mm Fan 3-Pack | Thermaltake CT120 120mm RGB Fan 2-Pack | AsiaHorse COSMIQ 120mm RGB Fan 3-Pack | Corsair iCUE Link QX120 RGB 120mm Triple Pack | Corsair iCUE Link RX120 RGB Triple Pack | Vetroo 140mm White ARGB Fan | Hilitand 80mm ARGB PWM Fan |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fan Size | not specified | 120mm | 120mm | 25mm | not specified | 120mm | 120mm | 120mm | 140mm | 120mm | 120mm | 120mm | 120mm | 140mm | 80mm |
| Max Fan Speed | not specified | not specified | not specified | 7000PRM | not specified | not specified | not specified | not specified | not specified | 2000 RPM | 2000 RPM | 2,400 RPM | 2,100 RPM | not specified | 2500 RPM |
| Max Airflow | not specified | not specified | not specified | 1.35CFM | 47.2 CFM ± 10% | not specified | not specified | not specified | not specified | not specified | 68.5 CFM | 63.1 CFM | 74.2 CFM | not specified | 26.5 CFM |
| Static Pressure | not specified | not specified | not specified | 2.32mmH₂O | 1.6 mmH2O ± 10% | not specified | not specified | not specified | not specified | not specified | 2.05mmH₂O | 3.8mm-H2O | 4.38mm-H2O | not specified | not specified |
| Noise Level | not specified | not specified | not specified | 18.8dBA | 6 - 30 dBA | not specified | not specified | not specified | not specified | not specified | 29.2 dB(A) | not specified | not specified | not specified | 25.5 dBA |
| Connector Type | not specified | not specified | 6-pin | XH2.54 2PIN | not specified | not specified | not specified | Molex | not specified | not specified | PWM | not specified | not specified | PWM | not specified |
| Bearing Type | not specified | Hydraulic | not specified | Hydraulic | not specified | not specified | Hydraulic | not specified | not specified | Hydraulic Bearing | FDB | Magnetic Dome | Magnetic Dome Bearing | Hydraulic Bearing | MFDB Fluid Dynamic |
| Lighting Type | not specified | RGB | RGB | RGB | ARGB | Addressable Gen 2 RGB | RGB | Static RGB LED | RGB | not specified | 5V 3-pin ARGB | RGB | not specified | 5V 3PIN ARGB | 5V ARGB |
| Lighting | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB | RGB |
| Compatible Device | not specified | not specified | Radiator, CPU Cooler | not specified | not specified | Radiator | not specified | Radiator, CPU Cooler | not specified | not specified | not specified | not specified | not specified | not specified | Radiator, CPU Cooler |
| Dimensions | 7 × 4.5 × 3 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 0.98 × 0.98 × 0.39 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 19.7 × 19.7 × 11 inches | 7.6 × 5.5 × 2.4 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.1 inches | 4.72 × 4.72 × 0.98 inches | 5.51 × 5.51 × 5.51 inches | 3.15 × 0.98 × 3.15 inches |
| Weight | not specified | not specified | not specified | not specified | 2.47 ounces | not specified | 0.32 ounces | not specified | 3.17 pounds | 12.8 ounces | not specified | 1.42 pounds | 1.1 pounds | not specified | not specified |
| Color | multicolored | BLACK 3-PACK | Ring | Led Color - 2510 24V | white | coolermaster halo white | not specified | White | white | Black | not specified | White | Black | White | not specified |
| Model | AC-024-BN1NAN-A1 | 8541605634 | A06 | RGBFAN251024VH | MFL-B2DW-18NPA-R1 | MFL-B4DN-15NPA-R1 | ZC RGB12305-01 US | DS-E06 | CL-F162-PL14SW-A | CT120 | not specified | CO-9051006-WW | CO-9051010-WW | not specified | Serounder475ztrsgvd |
| Size | not specified | RGB123 | not specified | 25mm | MF120 | 120×120×2mm | not specified | not specified | 140mm | 120mm | White-3-Packs | Triple (120mm) | 3 x 120mm | 140mm-HDB | not specified |
How to Choose the Best RGB Fans
-
Airflow Versus Static Pressure
When selecting fans, distinguish between case ventilation and radiator cooling. Standard exhaust and intake duties benefit from high airflow volume measured in cubic feet per minute. Radiators and restrictive mesh panels require static pressure to push air effectively through dense fins. If you mount fans directly onto liquid cooling radiators, select units engineered for resistance. The Corsair iCUE Link RX120 RGB Triple Pack focuses on high static pressure for radiators, whereas unrestricted chassis positions allow you to prioritize broader case airflow ratings to cycle fresh air efficiently.
-
Cable Management Architecture
Standard RGB fans require two independent cables per unit: one for motor power and another for lighting signals. Installing five or six individual fans quickly introduces a tangled bundle of ten to twelve wires behind your motherboard tray. Daisy-chain designs link neighboring fans together, passing power and lighting signals through a single shared line to your motherboard. The Thermaltake CT120 120mm RGB Fan 2-Pack uses simplified daisy-chain cabling to cut down excess wires. This reduces clutter, improves chassis interior airflow, and saves valuable installation time.
-
Fan Bearing Types
A fan's internal bearing mechanism determines its operational lifespan and noise profile over time. Simple sleeve bearings degrade faster when mounted horizontally because lubricating oil shifts away from the shaft. Hydraulic bearings utilize fluid dynamic pressure to maintain continuous lubrication, reducing friction and extending component life in both vertical and horizontal orientations. The upHere 120mm RGB Case Fan 3-Pack features hydraulic bearings for reliable long-term rotation. Inspect the published bearing specification to ensure quiet operation and structural longevity, especially if you plan to install cooling fans along the top chassis exhaust.
-
Direct Power Connections
Fan power interfaces dictate whether you can dynamically regulate rotational speed based on internal system temperatures. Fans powered directly via Molex cables draw a continuous twelve volts from your power supply unit, forcing them to run at maximum speed at all times. The DS leddess 120mm Static RGB Case Fans (6-Pack) utilizes direct Molex power for straightforward operation without requiring motherboard fan headers. Choose this direct wiring style if your motherboard lacks spare fan pins, but select pulse-width modulation headers if you prefer automated acoustic and speed adjustments.
-
Motherboard Synchronization Support
Addressable RGB lighting requires matching software or hardware controllers to manipulate individual light-emitting diodes. If you want unified lighting effects coordinated across your RAM, graphics card, and fans, verify motherboard software sync compatibility across ecosystems like Asus, ASRock, or MSI. The Shaking Tank MasterFan Halo 120mm ARGB Fans provide certified synchronization support across these major motherboard platforms. Choosing fans verified for your specific motherboard brand lets you adjust lighting patterns and colors directly inside system software without needing third-party companion tools or proprietary wireless remotes.
-
Frame Vibration Dampening
Rapidly spinning fan motors generate micro-vibrations that transfer directly into metal chassis panels, producing an audible low-frequency hum. Fans equipped with integrated rubber corner pads or silicone dampers absorb these vibrations at the mounting contact points before noise travels into the case structure. The upHere 120mm RGB Case Fan 5-Pack includes vibration-damping rubber pads to isolate mechanical motion from the chassis frame. Checking for built-in rubber corner bumpers ensures your cooling setup operates quietly even when fans accelerate toward their maximum rated revolutions per minute.
Frequently asked questions
Can you connect 6-pin RGB fans directly to a motherboard?
No, 6-pin fans cannot plug directly into standard 3-pin or 4-pin motherboard headers. Models like the upHere 120mm RGB 3-Pack and DS leddess 6-Pack combine power and RGB wiring into a single 6-pin connector. You must plug these into a compatible dedicated fan hub or controller rather than your motherboard fan headers.
What is the difference between static RGB and addressable RGB fans?
Static RGB fans display preset colors without individual diode control, whereas addressable RGB fans let you customize lighting effects per LED. Units like the DS leddess static 6-pack run steady patterns powered by Molex. In contrast, models like the Shaking Tank MasterFan Halo utilize Addressable Gen 2 RGB lighting compatible with Asus, ASRock, and MSI motherboard software.
How do daisy-chain case fans simplify PC cable management?
Daisy-chain fans link directly together to reduce the total number of wires routed to your motherboard. Models like the Thermaltake CT120 and AsiaHorse COSMIQ feature interconnecting cables that share fan power and lighting signals across adjacent frames. Corsair iCUE Link QX120 and RX120 triple packs use modular bridge connectors, allowing multiple fans to run over a single primary cable connection.
What does fan jam protection do in an RGB PC case fan?
Fan jam protection automatically stops the motor if an obstruction blocks the fan blades, preventing electrical burnout or blade breakage. Models such as the Cooler Master MasterFan MF120 Halo and Shaking Tank MasterFan Halo feature integrated jam detection sensors. When the obstruction is removed, the fan sensor clears and normal cooling operation resumes safely without damaging your internal components.
Can you install 24V micro cooling fans in a standard desktop PC?
Standard desktop PCs supply 12V and 5V power rails, making 24V fans incompatible without specialized voltage step-up hardware. The WINSINN 25mm Micro RGB Fan runs on 24V power with a small 2-pin XH2.54 connector. You should install this fan in compatible DIY electronics, specialized enclosures, or 3D printers rather than standard desktop motherboard headers.
Do 140mm case fans provide better cooling coverage than 120mm fans?
A 140mm fan covers more surface area than a 120mm frame, moving air across larger case openings. For instance, the Thermaltake SWAFAN EX14 and Vetroo 140mm fans fill broad intake and exhaust mounts. However, you must verify your PC case specifications before purchasing, as many compact or mid-tower mounts exclusively accept 120mm models like the Cooler Master MF120.
What are the benefits of hydraulic bearing case fans?
Hydraulic bearings use fluid lubrication to reduce friction and mechanical noise during operation, extending the fan's functional lifespan. Units such as the Thermaltake CT120, Vetroo 140mm, and upHere 120mm fans use hydraulic bearings for steady rotation. This design maintains smooth spinning speeds under continuous operation while damping internal vibrations across your chassis fan mounting points.