The Best ARCTIC Case Fans in 2026: 15 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right ARCTIC case fan depends on your clearance and airflow requirements. ARCTIC provides 80mm, 92mm, and 120mm fans in standard and slim profiles, available as single units or five-packs with black or white frames and no lighting.
The ARCTIC 80mm High-Speed Server Fan leads the list because it delivers extreme static pressure and airflow for 2U server cooling and high-pressure airflow. You can evaluate 15 models in this guide, compared strictly by the specifications published on their listings to match your headers and mounting spaces.
Quick picks
Our 15 picks
ARCTIC 80mm High-Speed Server Fan
Best for: 2U server cooling and high-pressure airflow
- Fan Size
- 80 mm
- Max Fan Speed
- 10000 rpm
- Max Airflow
- 173.30 m³/h
- Static Pressure
- 51 mmH₂O
- Connector Type
- 4-pin
- Bearing Type
- two ball bearings
The ARCTIC 80mm High-Speed Server Fan is an 80 mm cooling unit built for high-demand server environments. It delivers up to 10,000 RPM, producing 51 mmH₂O of static pressure and 173.30 m³/h of maximum airflow. Powered by dual ball bearings and regulated via PWM or voltage, it fits standard 2U chassis layouts. This fan suits you if you need intense airflow and high static pressure for dense server racks or compact enclosures.
Pros
- Reaches up to 10,000 RPM with 51 mmH₂O static pressure
- Dual ball bearings resist dust and heat
- Delivers up to 173.30 m³/h of airflow
- Works across 4-pin, 3-pin, and 2-pin motherboard headers
Cons
- 38 mm thickness exceeds standard 25 mm case fan clearance
- 80 mm frame does not fit standard 120 mm fan brackets
Good fit if
- You need high static pressure cooling for a 2U server case.
- You run hardware in warm or dusty conditions that benefit from dual ball bearings.
- You want a wide 500 to 10,000 RPM operating range controlled by PWM or voltage.
Skip if
- You require a standard 25 mm depth fan for tight desktop clearances.
- You have chassis mounts built exclusively for 120 mm cooling fans.
Verdict: ARCTIC 80mm High-Speed Server Fan delivers extreme static pressure and airflow for 2U racks or compact server chassis. Its wide speed range and dual ball bearings make it a durable choice for demanding hardware.
ARCTIC BioniX F120 120mm PWM Fan
Best for: synchronized gaming airflow and daisy-chained setups
- Fan Size
- 120mm
- Max Fan Speed
- 1800 rpm
- Max Airflow
- 69 cfm
- Static Pressure
- 2.10 mmH₂O
- Noise Level
- 0.5 Sone
- Connector Type
- 4-pin
The ARCTIC BioniX F120 is a 120mm case fan designed for gaming airflow. You get a wide 200 to 1800 RPM speed range controlled via a 4-pin PWM connection. It delivers up to 69 CFM of airflow with 2.10 mmH₂O of static pressure at a rated 0.5 Sone noise level. Built-in PWM Sharing Technology allows you to chain multiple fans together. It suits gaming cases that demand synchronized thermal control.
Pros
- Wide operating range from 200 to 1800 RPM
- Generates up to 69 CFM airflow and 2.10 mmH₂O static pressure
- PWM Sharing Technology allows daisy-chaining on one 4-pin header
- Six-year manufacturer warranty
Cons
- Noise level reaches 0.5 Sone at maximum speed
- Thickness of 1.06 inches exceeds standard 25mm dimensions
- No built-in RGB or LED lighting
Good fit if
- You need high airflow up to 69 CFM for gaming components.
- You want to sync multiple fans using PWM Sharing Technology.
- You need low-speed operation down to 200 RPM during light use.
Skip if
- You require integrated RGB lighting on your case fans.
- You have tight chassis clearance that cannot fit a 1.06-inch thick fan.
- You need ultra-high rotational speeds above 1800 RPM.
Verdict: ARCTIC BioniX F120 120mm PWM Fan delivers strong airflow up to 69 CFM and straightforward PST daisy-chaining for gaming rigs. Its 200 to 1800 RPM control range balances silence at idle with solid static pressure under load.
ARCTIC P12 120mm Static Pressure Fan
Best for: radiator cooling on standard 3-pin headers
- Fan Size
- 120 mm
- Max Fan Speed
- 1800 rpm
- Max Airflow
- 56.3 cfm
- Static Pressure
- 2.2 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 3-pin
The ARCTIC P12 is a 120mm case fan designed for high-resistance setups like heatsinks and radiators. You get 2.2 mmH₂O static pressure and 56.3 CFM of airflow operating at up to 1800 RPM. A fluid dynamic bearing keeps operation rated at 0.3 Sone. This model suits you if you need direct cooling power using a basic 3-pin motherboard connection.
Pros
- High static pressure rating of 2.2 mmH₂O for heatsinks and radiators
- Airflow delivery of 56.3 CFM at up to 1800 RPM
- Fluid dynamic bearing with sealed oil capsule
- Low noise output rated at 0.3 Sone
Cons
- Uses standard 3-pin connector instead of 4-pin PWM
- Lacks integrated daisy-chain sharing cables
Good fit if
- You need focused static pressure for heatsinks or radiator fins.
- You run standard 3-pin DC fan headers on your board.
- You want quiet operation backed by a fluid dynamic bearing.
Skip if
- You require 4-pin PWM speed regulation.
- You need built-in PST splitters to link multiple fans.
Verdict: ARCTIC P12 120mm Static Pressure Fan provides 2.2 mmH₂O pressure and 56.3 CFM airflow via a 3-pin connection. It delivers steady radiator cooling for systems running DC voltage control.
ARCTIC P12 PWM PST 120mm Fan
Best for: heatsinks, radiators, and filtered case intakes
- Fan Size
- 120 mm
- Max Fan Speed
- 1800 rpm
- Max Airflow
- 56.3 cfm
- Static Pressure
- 2.2 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 4-pin PWM
The ARCTIC P12 PWM PST is a 120 mm pressure-optimised case fan designed for restricted airflow environments. It operates across a speed range of 200 to 1800 RPM, with a 0 RPM mode below 5 percent PWM for silent idle operation. Delivering 2.2 mmH2O static pressure and 56.3 CFM airflow at 0.3 Sone, it suits you if you need controlled cooling through dense radiators, heatsinks, or intake dust filters using a 4-pin PWM header.
Pros
- 2.2 mmH2O static pressure for high-resistance mounting
- Wide 200 to 1800 RPM range with 0 RPM mode below 5 percent PWM
- 4-pin PWM PST connector for signal sharing and daisy chaining
- Rated noise level of 0.3 Sone
Cons
- Pack contains only a single fan
- No integrated LED or RGB illumination
- Maximum speed capped at 1800 RPM
Good fit if
- You need high static pressure for radiators, heatsinks, or mesh filters.
- You want the fan to stop entirely at idle via 0 RPM PWM control.
- You need to daisy-chain fan signals from a single 4-pin header.
Skip if
- You want integrated RGB or LED lighting on the fan.
- You need maximum speeds higher than 1800 RPM.
- You need multiple fans in one box for a full case build.
Verdict: ARCTIC P12 PWM PST 120mm Fan delivers focused 2.2 mmH2O static pressure and wide 200 to 1800 RPM regulation with zero-RPM capability. It provides a dependable cooling solution for restrictive intakes and radiators.
ARCTIC P12 Silent 120mm Fan
Best for: low-noise cooling without PWM control
- Fan Size
- 120 mm
- Max Fan Speed
- 1050 rpm
- Max Airflow
- 24.1 cfm
- Static Pressure
- 0.5 mmH₂O
- Noise Level
- 0.08 Sone
- Connector Type
- 3-pin
The ARCTIC P12 Silent is a 120mm case fan built for low-noise operation. It runs at a fixed speed of 1050 RPM, generating 24.1 CFM of airflow and 0.5 mmH₂O of static pressure with a rated noise output of 0.08 Sone. Powered by a standard 3-pin motherboard header, it suits you if you want steady cooling without acoustic spikes or complex software configuration in your chassis.
Pros
- Low noise level rated at 0.08 Sone
- Pressure-optimized design delivers 0.5 mmH₂O static pressure
- Standard 120mm mounting footprint
- Alloy and lubricant bearing reduces friction
Cons
- 3-pin connector lacks 4-pin PWM control
- Airflow output limited to 24.1 CFM
- Fixed maximum speed of 1050 RPM
Good fit if
- You want consistent, low-noise operation at 0.08 Sone.
- You use standard 3-pin motherboard fan headers.
- You need modest airflow for low-heat chassis locations.
Skip if
- You require dynamic 4-pin PWM speed adjustment.
- You need high airflow exceeding 24.1 CFM.
Verdict: ARCTIC P12 Silent 120mm Fan provides steady, low-noise cooling at a fixed 1050 RPM. Its 3-pin interface and modest 24.1 CFM output suit basic chassis ventilation without extra setup.
ARCTIC P12 PWM PST 120mm Fans 5-Pack
Best for: complete multi-fan case or radiator setups
- Fan Size
- 120 mm
- Max Fan Speed
- 1800 rpm
- Max Airflow
- 56.30 cfm
- Static Pressure
- 2.20 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 4-pin PWM
The ARCTIC P12 PWM PST 120mm Fan 5-Pack provides five pressure-optimised fans for complete case or radiator setups. Each fan runs from 200 to 1,800 RPM with a 0 RPM stop below five percent PWM. You get up to 56.30 CFM airflow, 2.20 mmH₂O static pressure, and a 0.3 Sone noise rating. Built-in PST connectors let you daisy-chain multiple 4-pin units to a single header.
Pros
- Wide 200 to 1,800 RPM operating range with 0 RPM mode below 5% PWM
- High 2.20 mmH₂O static pressure for restricted airflow paths
- Integrated PWM Sharing Technology daisy-chain connectors on 4-pin lines
- Low noise level rated at 0.3 Sone
Cons
- Standard 0.98-inch thickness does not fit slim-clearance locations
- No integrated RGB or lighting features
Good fit if
- You need five matching 120mm fans for a complete case setup.
- You want to chain several fans together on a single 4-pin PWM header.
- You need 2.20 mmH₂O static pressure for heatsinks or radiators.
Skip if
- You need low-profile slim fans rather than standard 25 mm units.
- You require integrated RGB lighting.
- You only need a single fan rather than a bundle of five.
Verdict: ARCTIC P12 PWM PST 120mm Fan 5-Pack delivers high static pressure and daisy-chain convenience across five cooling units. It gives you broad PWM control from 200 to 1,800 RPM for dense case setups.
ARCTIC P12 120mm 3-Pin Fan 5-Pack
Best for: multi-fan setups using 3-pin headers
- Fan Size
- 120 mm
- Max Fan Speed
- 1800 rpm
- Max Airflow
- 56.3 cfm
- Static Pressure
- 2.2 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 3-pin
This bundle gives you five 120mm pressure-optimised fans for your PC build. Each fan operates at 1800 RPM using a standard 3-pin motherboard connector. With 2.2 mmH₂O static pressure and 56.3 CFM airflow, they move air through heatsinks and restrictive grilles. You get fluid dynamic bearings rated at 0.3 Sone. Choose this bundle if you need multiple direct-power fans to fill out your case cooling.
Pros
- Delivers 2.2 mmH₂O static pressure for heatsinks and radiators
- Generates 56.3 CFM airflow at 1800 RPM
- Fluid dynamic bearing uses an oil capsule to prevent lubricant leakage
- Five 120mm fans included in one package
Cons
- Uses a 3-pin connector without 4-pin PWM control
- Runs at a single fixed 1800 RPM rating without voltage tuning
- No integrated LED lighting
Good fit if
- You need five matching 120mm fans to fill your chassis mounts.
- You want 2.2 mmH₂O static pressure for heatsinks or restrictive intakes.
- You connect your cooling directly to standard 3-pin fan headers.
Skip if
- You want automated 4-pin PWM speed control.
- You need smaller 80mm or 92mm mounting dimensions.
- You require integrated illumination or RGB features.
Verdict: ARCTIC P12 120mm 3-Pin Fan 5-Pack delivers five high-static-pressure fans designed for heatsinks and restricted grilles. It suits system builders who rely on standard 3-pin connections rather than PWM controls.
ARCTIC P8 80mm Dual Ball Bearing Fan
Best for: continuous 24/7 cooling in 80mm mounts
- Fan Size
- 80 mm
- Max Fan Speed
- 3000 RPM
- Max Airflow
- 23.4 CFM
- Static Pressure
- 1.9 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 4-pin PWM
The ARCTIC P8 PWM PST CO is an 80mm pressure-optimised case fan built for continuous 24/7 operation. You get a wide 200 to 3000 RPM speed range controlled via 4-pin PWM, along with PWM Sharing Technology to link multiple fans. Delivering 1.9 mmH₂O of static pressure and 23.4 CFM airflow, it suits compact enclosures, heatsinks, or server chassis where reliable nonstop cooling is necessary.
Pros
- Japanese dual ball bearing rated for continuous 24/7 operation
- Wide PWM regulation range from 200 to 3000 RPM
- PWM Sharing Technology allows synchronous multi-fan control
- Static pressure rating of 1.9 mmH₂O for heatsinks and radiators
Cons
- Airflow output is limited to 23.4 CFM
- No integrated RGB or decorative lighting
Good fit if
- You need an 80mm fan engineered for uninterrupted 24/7 runtimes.
- You mount cooling onto heatsinks or high-resistance brackets requiring 1.9 mmH₂O static pressure.
- You want to daisy-chain several fans using 4-pin PWM Sharing Technology.
Skip if
- You require standard 120mm fan mount dimensions for higher airflow volume.
- You want built-in RGB lighting effects for your PC build.
Verdict: ARCTIC P8 PWM PST CO 80mm Fan provides dependable continuous cooling with high static pressure for compact chassis and heatsinks. Its dual ball bearing and PWM sharing make it an efficient choice for nonstop setups.
ARCTIC P8 Silent 80mm Fan
Best for: Quiet cooling in restrictive 80 mm mounts
- Fan Size
- 80 mm
- Max Fan Speed
- 1600 RPM
- Max Airflow
- 15.6 CFM
- Noise Level
- 0.08 Sone
- Connector Type
- 3-pin
- Dimensions
- 3.15 × 3.15 × 0.98 inches
The ARCTIC P8 Silent is an 80 mm cooling fan built for compact spaces with high air resistance. It operates at 1600 RPM and generates 15.6 CFM of airflow while emitting 0.08 Sone of noise. A 3-pin connector powers the motor, and the pressure-focused blade profile targets heatsinks or dense intake slots. It suits you if you need a quiet, low-profile replacement fan for restricted 80 mm mounts.
Pros
- Noise level rated at 0.08 Sone at 1600 RPM
- Optimized for static pressure on heatsinks and radiators
- Bearing uses an alloy and lubricant combination to reduce friction
- Compact 80 mm size fits restricted mounts
Cons
- Fixed 3-pin connection lacks PWM control
- Maximum airflow limited to 15.6 CFM
Good fit if
- You need low-noise cooling in a restricted 80 mm mount.
- You mount your fan directly to a heatsink or radiator.
- You use standard 3-pin motherboard fan headers.
Skip if
- You require 4-pin PWM variable speed control.
- You need airflow throughput higher than 15.6 CFM.
Verdict: ARCTIC P8 Silent 80mm Static Pressure Fan provides quiet 0.08 Sone operation at 1600 RPM for tight 80 mm enclosures. Its 3-pin configuration and static pressure build suit heatsinks where low noise is your priority.
ARCTIC P8 80mm Pressure-Optimized Fans 5-Pack
Best for: multi-slot 80 mm radiator and heatsink cooling
- Fan Size
- 80 mm
- Max Fan Speed
- 3000 RPM
- Max Airflow
- 23.4 CFM
- Noise Level
- 0.3 Sone
- Connector Type
- 3-pin
- Bearing Type
- Fluid Dynamic Bearing
View on Amazon: ARCTIC P8 80mm Pressure-Optimized Fans 5-Pack
This bundle delivers five 80 mm static-pressure fans designed for compact cases, radiators, and dense heatsinks. Each unit runs at 3000 RPM, producing 23.4 CFM of airflow and a noise rating of 0.3 Sone. They utilize fluid dynamic bearings for lower friction and connect via standard 3-pin headers. You get a reliable multi-fan setup if you need direct, high-resistance cooling across multiple small mounts without PWM.
Pros
- Delivers 23.4 CFM airflow and static pressure optimization for heatsinks and radiators
- Fluid Dynamic Bearing includes an oil capsule to prevent lubricant leakage
- Quiet operation rated at 0.3 Sone at 3000 RPM
- Multipack includes five 80 mm fans
Cons
- Uses 3-pin connectors with no 4-pin PWM speed control
- No PST daisy-chain connectors included
Good fit if
- You need to populate multiple 80 mm fan slots in compact builds.
- You mount fans directly against dense heatsinks or radiators requiring static pressure.
- You have available 3-pin fan headers or manage speeds through voltage.
Skip if
- You require 4-pin PWM support for automated motherboard fan curve management.
- Your PC case uses standard 120 mm or 140 mm fan mounts instead of 80 mm.
Verdict: ARCTIC P8 80mm Pressure-Optimized Fans 5-Pack supplies five high-pressure 80 mm fans running at 3000 RPM for tight enclosures. It offers dependable static cooling on a standard 3-pin connection.
ARCTIC P8 PWM PST 80mm Fan 5-Pack
Best for: compact enclosures with multiple 80mm fan mounts
- Fan Size
- 80mm
- Max Fan Speed
- 3000 rpm
- Max Airflow
- 23.4 cfm
- Static Pressure
- 1.90 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 4-pin PWM
This bundle provides five 80 mm cooling fans built for high static pressure. You get a broad operating range between 200 and 3000 RPM, including a 0 RPM stop mode below 5 percent PWM. Integrated PWM Sharing Technology lets you daisy-chain the 4-pin connectors to share one header. It fits your build if you need multiple compact fans for small enclosures, drive cages, or 80 mm heatsinks.
Pros
- Wide speed range from 200 to 3000 RPM with 0 RPM mode under 5% PWM
- PWM Sharing Technology allows daisy-chaining via 4-pin connectors
- Generates 1.90 mmH₂O static pressure for heatsinks and restricted spaces
- Five-fan bundle covers multiple compact fan mounts at once
Cons
- Maximum airflow reaches 23.4 CFM due to the 80 mm frame
- Incompatible with cases lacking native 80 mm mounting points
Good fit if
- You need to populate multiple 80 mm fan mounts across your chassis
- You want synchronized speed control from a single 4-pin fan header
- You need static-pressure cooling for 80 mm heatsinks or tight drive bays
Skip if
- You use a chassis designed around larger 120 mm or 140 mm fan mounts
- You require airflow output higher than 23.4 CFM per fan location
Verdict: ARCTIC P8 PWM PST 80mm Fan 5-Pack delivers high static pressure and synchronized speed control across five compact units. It provides a practical cooling solution for small enclosures and 80 mm heatsinks that share a single fan header.
ARCTIC P12 Slim PWM PST 120mm Fan
Best for: small form factor builds needing slim fans
- Fan Size
- 120 mm
- Max Fan Speed
- 2100 rpm
- Max Airflow
- 34,51 cfm
- Static Pressure
- 1.33 mmH₂O
- Connector Type
- 4-pin PWM PST
- Dimensions
- 4.72 × 4.72 × 0.98 inches
The ARCTIC P12 Slim PWM PST is a 120 mm case fan built with a slim 15 mm profile. It runs from 200 to 2100 RPM via a 4-pin PWM connector, pushing up to 34.51 CFM of airflow with 1.33 mmH₂O of static pressure. It suits you if you need pressure-focused cooling inside a compact enclosure where standard 25 mm fans do not clear your components.
Pros
- Slim 15 mm profile fits tight clearances
- Speed range of 200 to 2100 RPM
- Generates 1.33 mmH₂O of static pressure
- PWM PST 4-pin connection allows fan daisy-chaining
Cons
- Lower maximum airflow at 34.51 CFM
- No integrated RGB lighting listed
Good fit if
- You build in small form factor cases with limited depth.
- You mount 120 mm fans to heat sinks or radiators in tight spaces.
- You want daisy-chainable PWM fan speed control.
Skip if
- You have space for standard 25 mm fans with higher airflow.
- You require integrated RGB illumination.
Verdict: ARCTIC P12 Slim PWM PST 120mm Fan delivers 1.33 mmH₂O static pressure in a compact 15 mm frame. It provides a practical cooling solution for clearance-limited PC cases.
ARCTIC F12 PWM PST 120mm Case Fan
Best for: daisy-chained airflow cooling in standard PC cases
- Fan Size
- 120mm
- Max Fan Speed
- 1350 RPM
- Max Airflow
- 53 cfm
- Static Pressure
- 1.00 mmH₂O
- Noise Level
- 0.3 Sone
- Connector Type
- 4-pin
The ARCTIC F12 PWM PST 120mm Case Fan is an airflow-focused case fan designed for standard 120 mm mounting locations. It operates between 230 and 1,350 RPM, pushing up to 53 CFM of air with a rated 0.3 Sone noise output. Its 4-pin PWM Sharing Technology connector lets you link multiple fans to one motherboard signal. This fan suits your setup if you want quiet, synchronized case ventilation without needing separate fan splitters.
Pros
- Integrated PWM Sharing Technology daisy-chain connector
- Broad 230 to 1,350 RPM speed range
- Fluid dynamic bearing with sealed oil capsule
- Low noise level rated at 0.3 Sone
Cons
- Modest static pressure rating of 1.00 mmH₂O
- Maximum rotational speed capped at 1,350 RPM
- No built-in LED lighting
Good fit if
- You want to daisy-chain several fans onto a single 4-pin PWM header.
- You need a quiet 120 mm exhaust or intake fan for unrestricted airflow.
- You want low minimum speeds starting down at 230 RPM.
Skip if
- You need high static pressure for dense water-cooling radiators.
- You require maximum fan speeds above 1,350 RPM for extreme cooling.
Verdict: ARCTIC F12 PWM PST 120mm Case Fan delivers balanced case airflow and quiet 0.3 Sone operation. It simplifies multi-fan setups by sharing PWM signals through its integrated PST cable.
ARCTIC P9 PWM PST 92mm Case Fan
Best for: compact builds needing high static pressure
- Fan Size
- 92 mm
- Max Fan Speed
- 3000 rpm
- Max Airflow
- 38.83 cfm | 65.97 m³/h
- Static Pressure
- 3.12 mmH₂O
- Connector Type
- 4-pin
- Dimensions
- 3.62 × 3.62 × 0.98 inches
The ARCTIC P9 PWM PST is a 92mm pressure-optimized cooling fan designed for compact enclosures, radiators, and heatsinks. It delivers 3.12 mmH₂O of static pressure and up to 38.83 CFM of airflow across a speed range of 200 to 3000 RPM. A 0dB mode halts the motor below 5% PWM signal. You get an integrated daisy-chain socket, making it suitable for tight builds requiring high static pressure in 92mm mounts.
Pros
- Delivers 3.12 mmH₂O static pressure for heatsinks and radiators
- Stops below 5% PWM for completely silent 0dB operation
- Shares PWM signals via built-in 4-pin socket splitter
- Operates across a wide 200 to 3000 RPM range
Cons
- Maximum airflow limited to 38.83 CFM by 92mm size
- Only offered in a single black color option
Good fit if
- You need a 92mm fan engineered for heatsinks or high-resistance spaces.
- You want a fan that stops completely during low-load operation.
- You plan to daisy-chain fans directly using an integrated splitter.
Skip if
- You have clearance and mounts for larger 120mm fans.
- You need higher airflow volume than 38.83 CFM.
Verdict: ARCTIC P9 PWM PST 92mm Case Fan delivers high static pressure and silent low-load stopping for small 92mm mounting locations. Its integrated PST connector allows simple daisy-chaining on a single fan header.
ARCTIC P12 Pro 120mm Fan
Best for: high-resistance radiators and restrictive case mesh
- Fan Size
- 120 mm
- Max Fan Speed
- 3000 rpm
- Connector Type
- 4-pin PWM
- Bearing Type
- Fluid Dynamic Bearing (FDB)
- Dimensions
- 4.7 × 4.7 × 1 inches
- Weight
- 6.53 ounces
The ARCTIC P12 Pro 120mm Fan is a high-speed case fan built for dense enclosures and radiators. It operates between 600 and 3000 RPM using a standard 4-pin PWM connection. When your motherboard drops the PWM signal below 5 percent, the fan stops completely for silent idle operation. You get fluid dynamic bearings designed to push air through tight mesh panels or radiators.
Pros
- Wide PWM speed range from 600 to 3000 RPM
- Blades stop completely below 5 percent PWM signal
- Fluid dynamic bearing for smooth running and durability
- High static pressure profile for radiators and mesh panels
Cons
- No integrated RGB or lighting features listed
- Only comes in black
Good fit if
- You need high static pressure for dense radiators or perforated panels.
- You want a fan that stops spinning completely at PWM signals below 5 percent.
- You require speeds up to 3000 RPM for heavy cooling loads.
Skip if
- You want integrated RGB or LED lighting in your chassis.
- You need a fan that fits 80mm or 140mm mounting locations.
Verdict: ARCTIC P12 Pro 120mm Fan delivers up to 3000 RPM and high static pressure for dense cooling setups, with a complete shutoff below 5 percent PWM. It provides a straightforward, high-output cooling option for restrictive cases and radiators.
Specifications side by side
| Spec | ARCTIC 80mm High-Speed Server Fan | ARCTIC BioniX F120 120mm PWM Fan | ARCTIC P12 120mm Static Pressure Fan | ARCTIC P12 PWM PST 120mm Fan | ARCTIC P12 Silent 120mm Fan | ARCTIC P12 PWM PST 120mm Fans 5-Pack | ARCTIC P12 120mm 3-Pin Fan 5-Pack | ARCTIC P8 80mm Dual Ball Bearing Fan | ARCTIC P8 Silent 80mm Fan | ARCTIC P8 80mm Pressure-Optimized Fans 5-Pack | ARCTIC P8 PWM PST 80mm Fan 5-Pack | ARCTIC P12 Slim PWM PST 120mm Fan | ARCTIC F12 PWM PST 120mm Case Fan | ARCTIC P9 PWM PST 92mm Case Fan | ARCTIC P12 Pro 120mm Fan |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fan Size | 80 mm | 120mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm | 80 mm | 80 mm | 80 mm | 80mm | 120 mm | 120mm | 92 mm | 120 mm |
| Max Fan Speed | 10000 rpm | 1800 rpm | 1800 rpm | 1800 rpm | 1050 rpm | 1800 rpm | 1800 rpm | 3000 RPM | 1600 RPM | 3000 RPM | 3000 rpm | 2100 rpm | 1350 RPM | 3000 rpm | 3000 rpm |
| Max Airflow | 173.30 m³/h | 69 cfm | 56.3 cfm | 56.3 cfm | 24.1 cfm | 56.30 cfm | 56.3 cfm | 23.4 CFM | 15.6 CFM | 23.4 CFM | 23.4 cfm | 34,51 cfm | 53 cfm | 38.83 cfm | 65.97 m³/h | not specified |
| Static Pressure | 51 mmH₂O | 2.10 mmH₂O | 2.2 mmH₂O | 2.2 mmH₂O | 0.5 mmH₂O | 2.20 mmH₂O | 2.2 mmH₂O | 1.9 mmH₂O | not specified | not specified | 1.90 mmH₂O | 1.33 mmH₂O | 1.00 mmH₂O | 3.12 mmH₂O | not specified |
| Noise Level | not specified | 0.5 Sone | 0.3 Sone | 0.3 Sone | 0.08 Sone | 0.3 Sone | 0.3 Sone | 0.3 Sone | 0.08 Sone | 0.3 Sone | 0.3 Sone | not specified | 0.3 Sone | not specified | not specified |
| Connector Type | 4-pin | 4-pin | 3-pin | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin | 3-pin | 4-pin PWM | 4-pin PWM PST | 4-pin | 4-pin | 4-pin PWM |
| Bearing Type | two ball bearings | not specified | Fluid Dynamic Bearing | not specified | not specified | not specified | Fluid Dynamic Bearing | Dual Ball | not specified | Fluid Dynamic Bearing | not specified | not specified | Fluid Dynamic Bearing | not specified | Fluid Dynamic Bearing (FDB) |
| Use | Server | Gaming | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Dimensions | 3.15 × 1.5 × 3.15 inches | 4.72 × 1.06 × 4.72 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 0.98 × 4.72 inches | 3.15 × 3.15 × 0.98 inches | 3.15 × 3.15 × 0.98 inches | 3.15 × 3.15 × 0.98 inches | 3.15 × 3.15 × 0.98 inches | 4.72 × 4.72 × 0.98 inches | 4.72 × 4.72 × 0.98 inches | 3.62 × 3.62 × 0.98 inches | 4.7 × 4.7 × 1 inches |
| Weight | 5.33 ounces | 4.55 ounces | 4.9 ounces | 5.11 ounces | 6 ounces | 5.11 ounces | 1 pounds | 2.77 ounces | 2.84 ounces | 2.86 ounces | 2.86 ounces | 3 ounces | 3.7 ounces | 3.74 ounces | 6.53 ounces |
| Size | S8038-10K | 120 mm | P12 Series | 120 mm (Pack of 1) | P12 Series | P12 PWM PST (5 Pack) | P12 Series | P8 PWM PST CO | P8 Silent | P8 (5 Pack) | P8 PWM PST (5 Pack) | 120 mm (1 Pack) | 120 mm | not specified | not specified |
| Color | black | white | Black | black | P12 Silent | black | Black | Black | P8 Silent | P8 Value Pack | Black | black | black | black | black |
| Model | ACFAN00279A | ACFAN00093A | ACFAN00118A | ACFAN00120A | ACFAN00130A | ACFAN00137A | ACFAN00135A | ACFAN00151A | ACFAN00152A | ACFAN00153A | ACFAN00154A | ACFAN00187A | ACFAN00203A | ACFAN00298A | P12 Pro PST |
Understanding the ARCTIC Fan Lineup
You can separate these fans by blade design and intended resistance. The F series, including the ARCTIC BioniX F120, targets airflow through open case grilles. The P series focuses on static pressure against radiators, heatsinks, and restrictive filters. For space-constrained builds, the ARCTIC P12 Slim PWM PST provides static pressure in tight clearances, while standard units like the ARCTIC P12 PWM PST handle regular mounts.
Connectivity also divides the catalog between PWM and 3-pin models. Fans with PST daisy-chaining let you connect several fans to one header for synchronized speed control. If you prefer fixed speeds or voltage regulation, 3-pin options like the ARCTIC P12 Silent suit direct motherboard headers without PWM curves.
Where the ARCTIC Lineup Fits
ARCTIC suits you if you need direct, functional cooling for compact cases, server chassis, or standard desktop setups. The spread extends from 80mm to 120mm, including a 92mm option. Physical shapes are square, with thicknesses ranging from 15mm slim frames to standard 25mm profiles and 38mm server depths. No models provide lighting options.
You will encounter specific gaps across this selection. The catalog stops at 120mm, so you will not find larger sizes. You also get no RGB LEDs, decorative trim, fan control hubs, or software tools. You connect every model using standard motherboard headers or PST daisy-chain plugs.
If you need ambient room cooling instead of targeted case airflow, specs for the best fans with oscillation outline directional coverage and motor capabilities.
How to Choose the Right ARCTIC Fan
-
Check Motherboard Header Pin Configuration
Check whether your motherboard provides 4-pin PWM or standard 3-pin fan headers before buying. A 4-pin PWM header adjusts motor speed using digital pulse signals across a wide range. A 3-pin header relies on direct DC voltage regulation to vary speed. If your system board or fan hub only supports DC voltage control, choose a dedicated 3-pin model. The ARCTIC P12 120mm Static Pressure Fan uses a standard 3-pin connection to deliver steady output without requiring PWM signaling.
-
Match Available Headers with Daisy-Chaining
Count the fan headers on your motherboard before deciding how many units to install. Most boards only provide two or three chassis fan headers. If you plan to mount multiple intake or exhaust fans, select models with integrated PST connectors. PST lets you daisy-chain multiple fans into a single motherboard header, sharing the same PWM control signal across all connected units. The ARCTIC F12 PWM PST 120mm Case Fan includes this integrated sharing cable, eliminating the need to install separate splitter cables or external hubs.
-
Measure Internal Frame Depth Clearance
Measure the physical space between your fan mounting bracket and adjacent components, such as memory modules or graphics cards. Standard PC fans measure around 25 mm deep, which can cause clearance collisions inside compact small form factor cases. If your chassis or radiator location provides minimal gap, choose a slim profile fan. The ARCTIC P12 Slim PWM PST 120mm Fan features a reduced 15 mm frame thickness. This narrower depth frees up 10 mm of clearance while maintaining adequate static pressure for restricted spots.
-
Select Bearings for Operating Hours
Assess your daily run time before choosing a fan. Continuous 24/7 environments expose cooling fans to constant mechanical stress. If you run a home server, network rack, or continuous workstation, prioritize dual ball bearing mechanisms. The ARCTIC P8 80mm Dual Ball Bearing Fan specifies dual ball bearings built for continuous 24/7 cooling. This bearing specification ensures dependable performance in non-stop setups, maintaining steady static pressure inside compact chassis without requiring frequent maintenance or downtime.
-
Evaluate Fixed Speeds Versus PWM
Decide whether you want dynamic fan curves or a fixed rotational speed. Dynamic PWM fans adjust speed according to component temperatures, but changing pitch can be audible in quiet rooms. Fixed-speed fans run at an unchanging rate, ensuring constant airflow and acoustic levels without software configuration. If your system prioritizes predictable, low-noise ventilation for basic chassis cooling, choose a dedicated low-RPM model. The ARCTIC P12 Silent 120mm Fan runs at a fixed 1050 RPM, delivering 24.1 CFM of airflow on a 3-pin connector without requiring motherboard curve adjustments.
-
Check Low-Load Shutoff Capabilities
Review the fan speed regulation floor if you want complete silence during idle tasks. Certain PWM models support silent operation by stopping their blades completely when the control signal drops below a specific threshold. This zero-RPM behavior keeps your computer silent while browsing or typing, while still providing rapid cooling under thermal stress. The ARCTIC P12 Pro 120mm Fan features a complete shutoff below a 5 percent PWM signal and scales up to 3000 RPM, giving you quiet idle operation alongside high static pressure for dense radiators.
Frequently asked questions
What is the maximum rotational speed of the ARCTIC P12 Pro?
The ARCTIC P12 Pro reaches a maximum rotational speed of 3000 RPM. This high output suits restrictive radiator fins and dense case grilles that require strong static pressure. When your system operates under light loads, the fan features a complete shutoff mechanism whenever the PWM signal drops below 5 percent.
How loud is the ARCTIC P8 Silent 80mm Fan during operation?
The ARCTIC P8 Silent runs at a noise level of 0.08 Sone while spinning at a fixed 1600 RPM. Its pressure-focused blade profile directs air through restrictive 80 mm mounting brackets or compact heatsinks. The fan uses a 3-pin connector, providing steady acoustic output without requiring dynamic PWM adjustments from your motherboard.
What airflow and static pressure does the ARCTIC P12 deliver?
The ARCTIC P12 produces up to 56.3 CFM of airflow alongside 2.2 mmH₂O of static pressure. These specifications help you drive cool air across radiator fins and through tight chassis grilles. The fan connects to your motherboard with a 3-pin connector, allowing you to regulate operating speeds through DC voltage settings in BIOS.
Can the ARCTIC P12 PWM PST fan completely stop spinning at idle?
Yes, the ARCTIC P12 PWM PST supports zero-RPM mode when PWM signal levels drop below threshold. Its overall operating range spans from 200 to 1800 RPM, allowing silent idle operation when cooling demands remain low. You also get 2.2 mmH2O of static pressure to push air through dust filters and heatsinks when active cooling resumes.
What are the speed and airflow specifications of the ARCTIC P12 Silent?
The ARCTIC P12 Silent operates at a fixed rotation speed of 1050 RPM. It delivers 24.1 CFM of airflow designed for quiet operation in low-demand environments. Because this fan utilizes a standard 3-pin connection rather than PWM control, it runs at a consistent, predictable pace without requiring complex curve tuning in your fan software.
Which ARCTIC fan model is designed for 24/7 continuous operation?
The ARCTIC P8 PWM PST CO is built specifically for continuous 24/7 cooling. It features dual ball bearings designed to reduce rotational friction and maintain durability over long operational periods. The fan also includes an integrated PST connector, enabling you to link multiple units together on a single header while preserving static pressure.
How much airflow does the ARCTIC BioniX F120 fan provide?
The ARCTIC BioniX F120 delivers airflow up to 69 CFM across a speed range of 200 to 1800 RPM. This makes it suitable for open case mounts where high volume movement is required. Its PST connection lets you daisy-chain fans together so you can synchronize airflow rates across your build from a single PWM header.