Be Quiet! Shadow Base 800 DX Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this be quiet shadow base 800 dx review, we look at a mid-tower case built for high airflow and large components. The listing highlights an open mesh design that prioritizes cooling efficiency. It supports E-ATX motherboards and 420mm radiators, making it suitable for ambitious builds. The case comes with three 140mm PWM fans included. These fans are designed to provide strong airflow while keeping noise levels low. The white finish adds a subtle aesthetic to the chassis. We will break down how these specifications translate to real-world performance and compatibility for your next PC project.
What stands out
- Open mesh design for exceptional airflow
- Supports E-ATX motherboards
- Accommodates up to 420mm radiators
- Includes three 140mm PWM fans
Who it fits
Good fit for
This case suits builders who need space for large components and high-performance cooling. If you plan to use an E-ATX motherboard or a 420mm AIO radiator, this chassis provides the necessary clearance. The included 140mm fans are ideal for those who want good airflow without buying extra parts immediately. Gamers and creators building spacious PCs will appreciate the tool-less drive installation and the integrated ARGB controller. The open mesh front ensures your high-end hardware stays cool during intense workloads.
Who should skip it
You should look elsewhere if you prefer a minimalist, closed-panel aesthetic. The open mesh design prioritizes airflow over dust filtration and visual concealment. If you need support for smaller form factors like Mini-ITX or Micro-ATX, this mid-tower might be too large for your desk or setup. Users who do not want ARGB lighting may find the included controller unnecessary. Additionally, if you plan to use 120mm fans exclusively, the 140mm included fans may not fit your specific cooling preferences or existing hardware.
Verdict: The Be Quiet! Shadow Base 800 DX is a spacious mid-tower that excels in airflow and component support. It is a solid choice for large builds that require E-ATX compatibility and extensive radiator options.
Key specs explained for this case
Case Type: Mid-Tower
This form factor balances size and capacity. It fits on most desks without taking up excessive floor space. You get enough room for standard components while avoiding the bulk of full towers. If your workspace is limited, a mid-tower offers a practical footprint. It is the standard choice for most gaming builds.
Motherboard Support: E-ATX
E-ATX refers to extra-large ATX boards, often used in high-end workstations or enthusiast gaming rigs. This support means you can install larger motherboards with more expansion slots. It provides flexibility for future upgrades. You do not need to restrict your choice to smaller standard ATX boards if your build requires more connectivity.
Radiator Support: 420mm
A 420mm radiator holds three 120mm fans or two 140mm fans. This size offers significant cooling capacity for liquid CPU coolers. It helps manage heat from high-performance processors during intense loads. You can fit larger radiators in the top or front positions. This spec is crucial if you plan to use a large AIO or custom loop.
Included Fans: 3x 140mm PWM
Three 140mm fans provide broad airflow coverage compared to smaller 120mm units. PWM allows the motherboard to control fan speed based on temperature. This ensures quiet operation at low loads and higher speeds when needed. You get immediate cooling without buying extra fans. The included set establishes a baseline airflow for the open mesh design.
Design and Build Overview
The listing describes the be quiet! Shadow Base 800 DX as a white mid-tower case with an open mesh design. This construction prioritizes airflow over dust filtration. You benefit from maximum cooling potential for high-performance components. The mesh panels allow air to flow freely through the chassis. This choice suits users who prioritize thermal performance and clean aesthetics over sealed environments.
According to the listing, the case measures 21.7 inches in length, 9.73 inches in width, and 20.6 inches in height. It weighs 26 pounds, indicating a substantial build. The dimensions accommodate E-ATX motherboards and up to 420mm radiators. This generous internal space allows you to install large graphics cards and extensive cooling systems without tight clearance issues. The mid-tower size fits standard desks while offering room for expansion.
The design includes subtle ARGB illumination controlled by an integrated controller. This feature adds visual appeal without requiring complex external hubs. The listing also notes simple, tool-less installation for HDDs and SSDs. This layout reduces assembly time and complexity. The included three 140mm PWM fans provide high airflow with quiet operation. The white finish and mesh construction create a modern look suitable for gaming setups. The build focuses on practicality and cooling efficiency rather than excessive sound dampening.
Setup and daily use guide
The be quiet! Shadow Base 800 DX is designed for straightforward assembly. You benefit from a spacious interior that accommodates large components. The listing confirms support for E-ATX motherboards, giving you flexibility for high-end boards. You also have room for 420mm radiators if you choose liquid cooling. This setup is ideal for builders who need ample space for bulky graphics cards or custom loops. The case includes three 140mm PWM fans. These provide high airflow while maintaining quiet operation. You do not need to purchase additional fans for basic cooling. Installation is simplified by tool-less drives. You can install HDDs and SSDs without screws or extra tools. This feature speeds up the build process. The case weighs 26 pounds and measures 21.7 inches in length. You should ensure your desk can support this weight and size. The white finish and subtle ARGB illumination add a clean look to your setup. An integrated ARGB controller manages the lighting. You do not need separate software or hubs for basic illumination effects. Daily use involves minimal maintenance. The open mesh design prioritizes airflow over dust filtration. You may need to clean the mesh panels more often than solid panels. This trade-off ensures your components stay cool under load. The tool-less drive bays make adding storage easy. You can swap drives quickly without searching for a screwdriver. This case suits users who value cooling performance and simple assembly. It works well for gaming rigs that require efficient heat dissipation. The included fans and spacious layout reduce the need for extra purchases. You get a complete cooling solution out of the box.
Before You Buy This Case
This case supports E-ATX motherboards and 420mm radiators, which demands careful planning. You must verify your specific motherboard dimensions fit within the E-ATX limit. Large liquid cooling loops require ample clearance, so check your radiator and pump sizes against the internal space. The included three 140mm PWM fans provide initial airflow, but you may need additional fans for optimal coverage in a spacious mid-tower. Since the mesh design prioritizes cooling, you should consider dust filters for the intake areas if you keep your PC in a dusty room. Regular cleaning of the mesh panels is necessary to maintain performance. This option suits builders who prioritize airflow and component size over dust protection, fitting well among other high-airflow choices on PC Cases & Case Fans.
Check before you buy
- Verify your motherboard fits the E-ATX specification.
- Check radiator length against the 420mm support limit.
- Confirm GPU and CPU cooler clearance in the case.
- Plan for additional fans to fill the mesh design.
- Prepare to clean mesh panels to prevent dust buildup.
The product at a glance
be quiet! Shadow Base 800 DX E-ATX Mid-Tower
Best for: large builds with E-ATX and 420mm radiators
- Motherboard Support
- E-ATX
- Case Type
- Mid-Tower
- Included Fans
- 3x 140mm PWM
- Radiator Support
- 420mm
- Use
- Gaming
- Lighting
- ARGB
View on Amazon: be quiet! Shadow Base 800 DX E-ATX Mid-Tower Affiliate link
The Be Quiet! Shadow Base 800 DX is a white mid-tower case designed for high airflow. It supports E-ATX motherboards and 420mm radiators. Three 140mm PWM fans are included for cooling. The open mesh design promotes ventilation. You get simple tool-less drive installation. This case suits gamers who need space for large components and quiet operation.
Pros
- Supports E-ATX motherboards
- Accepts up to 420mm radiators
- Includes three 140mm PWM fans
- Open mesh design for high airflow
Cons
- Heavy at 26 pounds
- ARGB lighting uses an integrated controller without app support
- No mention of USB-C connectivity
Good fit if
- You need a case for E-ATX motherboards
- You want high airflow with included fans
- You prefer a white aesthetic
Skip if
- You require a mini-ITX form factor
- You need extensive software control for lighting
- You prefer a compact build
Verdict: Be Quiet! Shadow Base 800 DX White Mid-Tower fits users building large gaming PCs with E-ATX boards and 420mm cooling. It delivers strong airflow and included fans for quiet performance.
Specifications side by side
| Spec | be quiet! Shadow Base 800 DX E-ATX Mid-Tower |
|---|---|
| Motherboard Support | E-ATX |
| Case Type | Mid-Tower |
| Included Fans | 3x 140mm PWM |
| Radiator Support | 420mm |
| Tower Size | Mid-Tower |
| Use | Gaming |
| Lighting | ARGB |
| Compatible Device | Radiator |
| Dimensions | 21.7 × 9.73 × 20.6 inches |
| Weight | 26 pounds |
| Color | White |
| Model | BGW62 |
Frequently asked questions
What motherboard sizes does the Shadow Base 800 DX support?
This mid-tower case supports E-ATX motherboards. You get ample room for large boards, including those with extended dimensions. The internal layout is designed to accommodate standard ATX and Micro-ATX sizes as well. This flexibility allows you to use high-end components without fitting issues. The spacious interior ensures your board mounts securely.
Can I install a 420mm radiator in this case?
Yes, the case supports 420mm radiators. You can mount large cooling solutions for effective heat dissipation. The listing confirms compatibility with radiators, making it suitable for liquid cooling setups. Ensure your pump and tubing have enough clearance. This support allows you to build a high-performance gaming PC with robust thermal management.
What is the weight of the be quiet! Shadow Base 800 DX?
The case weighs 26 pounds. This substantial weight provides stability and reduces vibration during operation. The heft comes from its steel construction and included components. You do not need to worry about the case tipping over on your desk. The solid build quality contributes to a quiet and steady computing environment.
Does this case include fans for airflow?
The listing indicates included fans for quiet performance. You benefit from immediate airflow without purchasing extra components. These fans help maintain cool temperatures for your hardware. The design prioritizes cooling efficiency with an open mesh structure. You get a balanced setup right out of the box for your gaming rig.
What color options are available for this model?
This specific model is available in white. The exterior features a clean white finish that complements modern builds. The model number BGW62 identifies this white variant. You can match it with other white components for a cohesive look. The mesh panels maintain the white aesthetic while ensuring proper air circulation.
What are the external dimensions of the case?
The dimensions are 21.7 inches in length, 20.6 inches in height, and 9.73 inches in width. These measurements define the footprint you need on your desk. The mid-tower size fits most standard workspaces. You can verify your desk space against these numbers before purchasing. The compact height helps it fit under many monitors.
Is this case suitable for RGB lighting enthusiasts?
Yes, the case features ARGB lighting support. You can connect addressable RGB fans and strips for customizable effects. The internal layout allows for wiring management alongside lighting components. This feature lets you personalize your gaming PC’s appearance. The white exterior provides a bright canvas for your lighting choices.