Antec Performance 1 Full Tower or Antec Flux Pro Full-Tower Case? Which Antec Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
We compare the antec performance 1 ft full tower e atx PC case vs flux pro full tower. Both are full-tower E-ATX chassis designed for large components. The main difference lies in their design focus and airflow capacity. The Performance 1 prioritizes a sleek glass showcase with a digital display. The Flux Pro emphasizes extensive cooling potential with more pre-installed fans and radiator support. You should review the specific specs below to see which fits your build.
Key differences
| Aspect | Antec Performance 1 Full Tower E-ATX Case | Antec Flux Pro Full-Tower Case with 6 Fans |
|---|---|---|
| Included Fans | 3 PWM Fans | 6 PWM Fans |
| Radiator Support | not listed | 420mm |
| Side Panel Material | Dual 4mm Tempered Glass | Metal, Glass and Wood |
| Weight | 27.7 pounds | 29 pounds |
Which one should you choose?
Choose Antec Performance 1 Full Tower E-ATX Case if
- You want a case with dual tempered glass side panels for a clear view of your components.
- You prefer a lighter chassis that is easier to move.
- You want a built-in temperature display and USB Type-C port.
Choose Antec Flux Pro Full-Tower Case with 6 Fans if
- You need maximum airflow with six pre-installed PWM fans.
- You plan to use large radiators, such as a 420mm unit.
- You like a mixed-material aesthetic with metal, glass, and wood textures.
Verdict: The Antec Performance 1 is better for users who prioritize visual appeal and a lighter build. The Flux Pro suits builders who need extensive cooling options and higher fan capacity. Choose based on whether you value aesthetics or raw airflow potential.
Performance 1 vs Flux Pro Specs
Included Fans
The Antec Flux Pro includes six PWM fans out of the box, while the Antec Performance 1 comes with three PWM fans. The Flux Pro pre-installs three Tranquil 140mm fans at the front, two P12R reverse PWM fans on the power supply shroud, and one Tranquil 140mm fan in the rear. This configuration provides immediate airflow coverage for a large chassis. The Performance 1 offers a basic starting point with three fans, which may require you to purchase additional units for optimal cooling in a full tower. Having double the included fans gives the Flux Pro a significant head start in thermal management setup.
Radiator Support
The Antec Flux Pro supports simultaneous installation of a 420mm radiator and a 360mm radiator, offering extensive cooling options for high-performance liquid cooling loops. The Antec Performance 1 data does not specify radiator compatibility limits, so you must check the manual for maximum radiator sizes. The Flux Pro ability to handle a 420mm unit allows for more efficient heat dissipation in demanding builds. If you plan to use large radiators for extreme overclocking, the Flux Pro provides clearer support specifications. This flexibility makes it a stronger choice for enthusiasts prioritizing liquid cooling performance.
Side Panel Design
Both cases feature dual 4mm tempered glass side panels, allowing you to showcase your internal components clearly. The Antec Performance 1 uses standard tempered glass for this visual appeal. The Antec Flux Pro combines metal, glass, and wood to create a high-quality texture with different materials. This material mix offers a distinct aesthetic compared to the all-glass approach of the Performance 1. If you prefer a modern look with mixed textures, the Flux Pro stands out. For a traditional glass showcase, both models deliver similar transparency and structural integrity for side visibility.
Connectivity
The Antec Performance 1 features a Type-C 10Gbps port ready for high-speed data transfer. It also includes a temperature display to glance at system status and Antec iUnity for instant PC spec data. The Antec Flux Pro data does not list specific USB port types or speeds, though it includes a CPU/GPU dual temperature display. The Performance 1 offers a clear advantage in connectivity with its high-speed Type-C option. This port is essential for users who frequently transfer large files. The Flux Pro focuses more on cooling displays rather than front-panel data transfer speeds.
Dimensions and Weight
The Antec Flux Pro is slightly larger and heavier, measuring 9.64 inches in width, 21.5 inches in height, and 20.9 inches in length, weighing 29 pounds. The Antec Performance 1 measures 9.06 inches in width, 20.6 inches in height, and 20.6 inches in length, weighing 27.7 pounds. The Flux Pro offers more internal volume, which can accommodate larger components and more cables. The Performance 1 is more compact, which might fit better in smaller spaces. The extra size of the Flux Pro supports its higher fan capacity and radiator options.
Choose your Antec full tower
You want maximum airflow and cooling
The Flux Pro includes six PWM fans out of the box. It supports up to twelve fans simultaneously. You can install a 420mm radiator alongside a 360mm radiator. This setup provides superior heat dissipation for high-performance components. The multi-directional vent design further enhances air circulation. If cooling capacity is your priority, this model delivers the necessary hardware.
You prefer a minimalist glass design
The Performance 1 features dual 4mm tempered glass side panels. This design offers a clean showcase for your internal components. It includes three PWM fans and two cable covers for organized routing. The Type-C 10Gbps port ready front panel adds modern connectivity. If you value a sleek aesthetic with ample glass visibility, this case suits your needs.
You want unique material textures
The Flux Pro combines metal, glass, and wood for a distinct texture. This mix of materials creates a high-quality finish that stands out. The innovative iShift PSU mount allows for 90-degree installation. Removable cooling brackets on the top, front, and shroud offer flexibility. If you appreciate diverse material combinations in your chassis, this option provides that unique look.
The products compared
Antec Performance 1 Full Tower E-ATX Case
Best for: E-ATX builders wanting glass visibility
- Motherboard Support
- E-ATX
- Case Type
- Full Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4x PWM
- Connectivity
- Type-C
- Dimensions
- 20.6 × 9.06 × 20.6 inches
View on Amazon: Antec Performance 1 Full Tower E-ATX Case Affiliate link
The Antec Performance 1 FT is a full tower case supporting E-ATX motherboards. It includes three PWM fans and features dual 4mm tempered glass side panels. A built-in temperature display lets you check system status quickly. The case also supports a Type-C 10Gbps port. It suits builders who want a large chassis with clear visibility and basic monitoring.
Pros
- Supports E-ATX motherboards
- Includes three PWM fans
- Dual 4mm tempered glass side panels
- Built-in temperature display
Cons
- Comes with only three fans, fewer than the Flux Pro
- Heavy at 27.7 pounds
- No mention of USB-C port pre-installed
Good fit if
- You need a large case for E-ATX boards
- You want to see your components through glass
- You prefer basic hardware monitoring
Skip if
- You need more than three included fans
- You want a lighter case
- You prefer a single side panel design
Verdict: Antec Performance 1 FT Full Tower is a solid choice for builders prioritizing motherboard compatibility and visibility. It fits those who need E-ATX support and clear views of their hardware.
Antec Flux Pro Full-Tower Case with 6 Fans
Best for: high-airflow E-ATX builds
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Included Fans
- 6 PWM Fans
- Radiator Support
- 420mm
- Compatible Device
- Radiator
- Dimensions
- 20.9 × 9.64 × 21.5 inches
View on Amazon: Antec Flux Pro Full-Tower Case with 6 Fans Affiliate link
The Antec Flux Pro is a full-tower case built for E-ATX motherboards. It includes six PWM fans, with three 140mm units at the front and two reverse fans on the power supply shroud. The design combines metal, glass, and wood. You can install up to twelve fans or dual radiators, including a 420mm and a 360mm unit. This case suits builders needing extensive cooling options and a premium aesthetic.
Pros
- Includes six PWM fans for strong airflow
- Supports up to twelve fans simultaneously
- Allows 420mm and 360mm radiator installation
- Features a 90-degree PSU mount
- Includes CPU and GPU temperature displays
Cons
- Heavy build at 29 pounds
- Large dimensions require ample desk space
- White finish shows dirt easily
Good fit if
- You need E-ATX motherboard support
- You plan to use multiple large radiators
- You want pre-installed high-quality fans
Skip if
- You prefer a compact mid-tower case
- You want a black color scheme
- You have limited floor space for heavy cases
Verdict: Antec Flux Pro Full-Tower White delivers robust cooling capacity with six included fans and dual radiator support. It fits enthusiasts building high-end E-ATX systems who prioritize airflow and temperature monitoring.
Specifications side by side
| Spec | Antec Performance 1 Full Tower E-ATX Case | Antec Flux Pro Full-Tower Case with 6 Fans |
|---|---|---|
| Motherboard Support | E-ATX | E-ATX |
| Case Type | Full Tower | Full-Tower |
| Side Panel | Tempered Glass | not stated |
| Included Fans | 4x PWM | 6 PWM Fans |
| Radiator Support | not stated | 420mm |
| Tower Size | Full-Tower | Full-Tower |
| Connectivity | Type-C | not stated |
| Compatible Device | not stated | Radiator |
| Dimensions | 20.6 × 9.06 × 20.6 inches | 20.9 × 9.64 × 21.5 inches |
| Weight | 27.7 pounds | 29 pounds |
| Color | Performance 1 | White |
| Model | PERFORMANCE 1 FT | FLUX PRO WHITE |
Frequently asked questions
Which case is better for E-ATX motherboards?
Both the Antec Performance 1 and the Antec Flux Pro support E-ATX motherboards. They are both full-tower chassis designed to accommodate large form factors. You can install high-end boards in either case without fitment issues. The choice depends on whether you prefer the Performance 1’s glass visibility or the Flux Pro’s included cooling fans.
Does the Flux Pro come with fans?
Yes, the Antec Flux Pro includes six PWM fans out of the box. It comes pre-installed with three Tranquil 140mm fans at the front and two P12R reverse PWM fans. This setup provides immediate airflow for your build. The Performance 1 includes fewer fans, so the Flux Pro offers more cooling capacity right away.
Which case supports more radiator sizes?
The Antec Flux Pro supports dual radiator configurations, allowing you to install a 420mm radiator alongside a 360mm radiator. This flexibility helps manage heat for high-end components. The Performance 1 focuses on visibility and compatibility but does not highlight the same extensive radiator support options found in the Flux Pro design.
What are the physical dimensions of these cases?
The Antec Performance 1 measures 20.6 inches in height and 20.6 inches in length, weighing 27.7 pounds. The Antec Flux Pro is slightly larger at 21.5 inches high and 20.9 inches long, weighing 29 pounds. Both are full-tower sizes, but the Flux Pro offers a bit more internal volume for larger components and cooling setups.
Is the Performance 1 good for visibility?
The Antec Performance 1 is designed for builders who want clear views of their hardware. It features a sleek glass design that showcases your internal components effectively. If you prioritize aesthetics and seeing your E-ATX motherboard and graphics cards, this model is a solid choice compared to the more utilitarian airflow-focused Flux Pro.
Can the Flux Pro handle high-airflow builds?
Yes, the Antec Flux Pro is ideal for high-airflow E-ATX builds. It supports up to twelve fans simultaneously for robust cooling capacity. With six included PWM fans and dual radiator support, it manages heat efficiently. This makes it suitable for enthusiasts building powerful systems that generate significant thermal output during intensive tasks.