Antec Flux Pro Full-Tower Case Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This antec flux pro full tower e atx PC case review focuses on the white model. It is a full-tower chassis designed for E-ATX motherboards. The case measures 21.5 inches tall, 20.9 inches long, and 9.64 inches wide. It weighs 29 pounds. Two specs define its core identity: it supports E-ATX boards and includes six PWM fans out of the box. The design combines metal, glass, and wood for a distinct texture. You get multi-directional venting and support for up to twelve fans. This listing provides the raw data to help you decide if the size and airflow capacity match your build needs.
What stands out
- Supports E-ATX motherboards for maximum component compatibility.
- Includes six PWM fans: three 140mm front, two 120mm reverse, and one 140mm rear.
- Handles a 420mm radiator and a 360mm radiator at the same time.
- Features an innovative iShift PSU 90-degree mount for cleaner cable management.
- Constructs the exterior using a mix of metal, glass, and wood materials.
Who it fits
Good fit for
You should consider this case if you are building a high-end system with an E-ATX motherboard. The full-tower size accommodates large graphics cards and extensive cooling setups. The included six fans provide immediate airflow without extra purchases. If you need to run both a 420mm and a 360mm radiator simultaneously, this chassis supports that configuration. The white finish and mixed materials also suit users who want a distinctive aesthetic that stands out in a large footprint.
Who should skip it
You should look elsewhere if you have limited desk or floor space. The dimensions are 20.9 inches long, 9.64 inches wide, and 21.5 inches tall. At 29 pounds, it is heavy and requires a sturdy surface. Small form factor builders will find this full-tower far too large. Users who prefer a minimalist or uniform material look might dislike the combination of metal, glass, and wood. Additionally, if you do not need E-ATX support, the extra size may not justify the footprint.
Verdict: This full-tower case offers substantial space for E-ATX builds and includes a robust fan setup. It is a practical choice for large systems requiring extensive cooling options.
Antec Flux Pro Key Specs
Case Type: Full-Tower
This chassis offers a large internal volume, allowing for extensive component layouts. You gain ample clearance for long graphics cards and large air coolers. The spacious interior also facilitates better airflow paths compared to smaller mid-tower designs. If you plan to build a high-end system with multiple drives or extensive water cooling loops, this form factor provides the necessary physical space to accommodate those parts without crowding.
Motherboard Support: E-ATX
The motherboard tray is designed to hold E-ATX boards, which are typically wider than standard ATX formats. This support allows you to install enthusiast-grade motherboards with additional PCIe slots or enhanced VRM heatsinks. You must verify that your specific E-ATX board fits within the case width limits. This flexibility is essential for builders using high-end workstations or gaming rigs that require extra expansion capabilities beyond standard consumer boards.
Included Fans: 6 PWM fans
The case arrives with six pre-installed fans, reducing the need for immediate additional purchases. These fans use Pulse Width Modulation, enabling you to adjust their speed via software for optimal noise and cooling balance. Having six fans provides strong initial airflow across the front, rear, and top. This setup helps maintain consistent temperatures for your CPU and GPU, offering a solid baseline for air cooling performance without requiring you to buy extra units immediately.
Radiator Support: 420mm
You can install a 420mm liquid cooling radiator, which provides more surface area for heat dissipation than smaller 240mm or 360mm units. This larger radiator helps keep high-performance CPUs cooler under heavy loads. The case supports simultaneous installation of multiple radiators, such as a 420mm and a 360mm unit. This capability is ideal for enthusiasts who want maximum thermal headroom for overclocking or sustained intensive workloads using advanced water cooling solutions.
Materials and Physical Layout
The listing describes a construction that blends metal, glass, and wood. This combination creates a textured surface that distinguishes it from standard all-metal or all-plastic enclosures. The exterior finish is white, which defines the visual tone of the build. You should expect a substantial footprint, as the chassis weighs 29 pounds. This mass suggests a stable base that resists tipping, though it will require a sturdy desk or floor space to accommodate its size.
Internally, the layout prioritizes airflow and component flexibility. The case supports up to 12 fans simultaneously, with six PWM units pre-installed. You get three 140mm Tranquil fans at the front, two P12R reverse fans on the power supply shroud, and one rear 140mm fan. The multi-directional vent design supports this extensive cooling configuration. You can also remove cooling brackets on the top, front, and power supply shroud to customize airflow paths for your specific hardware.
The listing highlights an innovative iShift PSU mount that allows for a 90-degree rotation. This feature helps manage cable routing in a large chassis. You also gain a dual temperature display for both CPU and GPU. These controls provide immediate feedback without needing third-party software. The design choices indicate a focus on high-end thermal management and aesthetic cohesion for large builds.
Setup and Everyday Use
Building in this full-tower chassis requires patience due to its 29-pound weight and generous dimensions. The case measures 21.5 inches tall, 20.9 inches long, and 9.64 inches wide. You will need sufficient desk or floor space to accommodate its footprint. The interior volume supports E-ATX motherboards, which are common in high-end builds. This large form factor allows for extensive component layouts and long graphics cards without crowding.
Fan installation is straightforward thanks to the pre-installed six PWM fans. The listing specifies three Tranquil 140mm fans at the front, two P12R PWM reverse fans on the power supply shroud, and one rear fan. The design supports up to twelve fans simultaneously, giving you flexibility for future upgrades. The removable cooling brackets on the top, front, and PSU shroud simplify radiator mounting. You can install a 420mm radiator and a 360mm radiator at the same time, which is ideal for high-performance liquid cooling loops.
Daily use involves managing heat through the multi-directional vent design. The innovative iShift PSU 90-degree mount helps organize cables and improves airflow around the power supply. The dual temperature display for the CPU and GPU provides immediate feedback on system thermals without needing third-party software. The combination of metal, glass, and wood creates a sturdy structure that resists vibration. You benefit from a quiet environment due to the included PWM fans, which adjust speed based on thermal demand. The white finish requires occasional dusting to maintain its appearance, but the materials are designed for durability. This case suits users who prioritize expandability and thermal performance over compactness.
Before You Buy This Case
This full-tower chassis requires careful planning before you begin. You must verify that your workspace can accommodate its 21.5-inch height and 20.9-inch length. The E-ATX motherboard support means you need a compatible board with the correct mounting hole pattern. Check your graphics card length against the internal clearance, as large coolers may restrict space. The included six PWM fans provide a solid starting point, but you may need additional fans for optimal airflow depending on your component heat output. The dual temperature display is useful, but ensure your motherboard headers support the PWM signals. Regular cleaning of the wood and metal surfaces is necessary to maintain the textured finish. This case sits alongside other high-capacity options by offering extensive radiator support, including simultaneous 420mm and 360mm installations. You should compare its internal layout with other full-towers to ensure your specific components fit comfortably without obstructing airflow paths.
Check before you buy
- Verify E-ATX motherboard compatibility with mounting holes.
- Check graphics card length against internal clearance.
- Ensure workspace fits 21.5-inch height and 20.9-inch length.
- Confirm PWM fan header availability on motherboard.
- Plan cable management for six included fans.
The product at a glance
Antec Flux Pro Full-Tower Case with 6 Fans
Best for: E-ATX builds with extensive liquid cooling
- Motherboard Support
- E-ATX
- Case Type
- Full-Tower
- Included Fans
- 6 PWM Fans
- Radiator Support
- 420mm
- Compatible Device
- Radiator
- Dimensions
- 20.9 × 9.64 × 21.5 inches
View on Amazon: Antec Flux Pro Full-Tower Case with 6 Fans Affiliate link
The Antec Flux Pro is a white full-tower case built for E-ATX motherboards. It includes six PWM fans and supports up to twelve total. You get dual 420mm and 360mm radiator support. The design mixes metal, glass, and wood. A dual temperature display shows CPU and GPU stats. This case suits builders needing extensive cooling options and high-end component clearance.
Pros
- Supports E-ATX motherboards in a full-tower chassis
- Includes six pre-installed PWM fans
- Accepts 420mm and 360mm radiators simultaneously
- Features a CPU and GPU dual temperature display
- Combines metal, glass, and wood materials
Cons
- Heavy at 29 pounds
- Large footprint at 20.9 inches long
- Only two color variations available
Good fit if
- You need E-ATX motherboard support
- You plan to use multiple large radiators
- You want a case with pre-installed fans
Skip if
- You prefer a compact micro-ATX build
- You need a lightweight case under 20 pounds
- You want a standard ATX size only
Verdict: Antec Flux Pro Full-Tower E-ATX Case fits builders who require maximum cooling capacity and E-ATX support. The included fans and dual radiator mounts make it ideal for high-performance liquid cooling setups.
Specifications side by side
| Spec | Antec Flux Pro Full-Tower Case with 6 Fans |
|---|---|
| Motherboard Support | E-ATX |
| Case Type | Full-Tower |
| Included Fans | 6 PWM Fans |
| Radiator Support | 420mm |
| Tower Size | Full-Tower |
| Compatible Device | Radiator |
| Dimensions | 20.9 × 9.64 × 21.5 inches |
| Weight | 29 pounds |
| Color | White |
| Model | FLUX PRO WHITE |
Frequently asked questions
Does the Antec Flux Pro support E-ATX motherboards?
Yes, it supports E-ATX motherboards. This allows you to install larger boards with more expansion slots. The full-tower design provides the necessary internal space for these extensive layouts. You gain flexibility for high-end workstation or gaming builds that require maximum connectivity.
How many fans come with the case?
The listing indicates it comes with six fans. This setup helps establish immediate airflow without buying extras. The dual radiator mounts complement these fans for liquid cooling. You get a comprehensive cooling solution right out of the box for your components.
What are the dimensions of the Antec Flux Pro?
It measures 21.5 inches tall, 20.9 inches long, and 9.64 inches wide. These large dimensions define its full-tower classification. You need ample desk or floor space to accommodate this footprint. The height allows for large air coolers and long radiators.
Is the Antec Flux Pro heavy?
Yes, it weighs 29 pounds. This weight suggests a sturdy construction using metal, glass, and wood. The substantial mass helps reduce vibration during operation. You should handle it with care during installation due to its significant heft and large size.
What color is the Antec Flux Pro model?
The model is white. This finish defines the visual tone of your build. The exterior combines white metal, glass, and wood for a textured look. You can use this color as a base for a clean, bright aesthetic in your setup.
Can I use liquid cooling in this case?
Yes, it features dual radiator mounts. This supports extensive liquid cooling setups for high-performance builds. The included six fans assist in managing heat from radiators and components. You have the capacity to run complex loops or multiple AIOs effectively.