Best PC Cases with 360mm Radiator: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right PC case with 360mm Radiator support ensures your liquid cooling system fits alongside your key components. We compared 15 products using the specifications published on their listings. The SilverStone 4U Rackmount Server Chassis earns the top spot because it combines 360mm liquid cooling capability with SSI-EEB motherboard support in a 4U rackmount frame.
This guide helps you decide which case size, cooling layout, and motherboard form factor best fit your target setup.
Quick picks
The best fit for you
- You need a rackmount chassis with 360mm liquid cooling SilverStone 4U Rackmount Server Chassis The 4U chassis supports standard rack installations, 360mm radiators, and SSI-EEB motherboards.
- You need to house an E-ATX board and long GPU Thermaltake View 270 Plus TG ARGB Mid-Tower It accommodates E-ATX motherboards, GPUs up to 420mm, and a top-mounted 360mm radiator.
- You want wood styling with many pre-installed fans FOIFKIN Walnut Mid-Tower ATX Case The case includes a walnut wood front panel, seven PWM ARGB fans, and top 360mm radiator support.
Our 15 picks
SilverStone 4U Rackmount Server Chassis
Best for: rackmount servers needing 360mm liquid cooling
- Radiator Support
- 360mm Radiator
- Motherboard Support
- SSI-EEB, Extended ATX
- Case Type
- 4U Rackmount
- Use
- Server
- Dimensions
- 18.4 × 17.3 × 6.93 inches
View on Amazon: SilverStone 4U Rackmount Server Chassis (paid link)
The SilverStone 4U Rackmount Server Chassis is a black server case designed to fit standard rack installations. You get room for a 360mm radiator along with motherboards up to SSI-EEB and Extended ATX form factors. It features eight expansion slots and front USB Type-C connectivity. This chassis suits you if you need enterprise-grade board compatibility and liquid cooling inside a 4U rack enclosure.
Pros
- Supports liquid cooling radiators up to 360mm
- Accommodates up to SSI-EEB and Extended ATX motherboards
- Provides 8 PCIe or PCI expansion slots
- Includes sliding rail mounting holes for quick installation
- Features a front USB Type-C interface
Cons
- Requires a 4U rack setup rather than a desktop footprint
- No cooling fans listed as included
Good fit if
- You need a 4U rackmount case that accommodates a 360mm liquid radiator.
- You run large SSI-EEB or Extended ATX motherboards.
- You require up to 8 expansion slots for multi-card configurations.
Skip if
- You want a standard tower case for a desktop workspace.
- You need a chassis that comes with pre-installed fans out of the box.
Verdict: SilverStone 4U Rackmount Server Chassis pairs 360mm liquid cooling capability with SSI-EEB motherboard support in a standard rack form factor. It gives you the clearance and expansion slots needed for high-density hardware.
RackChoice 4U Rackmount 360mm Radiator Chassis
Best for: liquid-cooled EATX rackmount server builds
- Radiator Support
- 360mm Radiator
- Motherboard Support
- EATX, ATX, MicroATX, Mini-ITX
- Case Type
- 4U rackmount
- Use
- Server
- Dimensions
- 18.3 × 19 × 7 inches
- Weight
- 15.3 pounds
View on Amazon: RackChoice 4U Rackmount 360mm Radiator Chassis (paid link)
The RackChoice 4U rackmount server chassis brings liquid cooling directly into standard 19-inch rack setups. It supports up to a 360mm radiator alongside motherboards ranging from Mini-ITX up to E-ATX. You get eight full-height expansion slots for multi-card setups and two internal 3.5-inch drive bays. This chassis suits you if you need dense rackmount computing paired with high-capacity liquid cooling for performance hardware.
Pros
- Supports liquid cooling radiators up to 360mm
- Compatible with EATX, ATX, MicroATX, and Mini-ITX motherboards
- Includes eight full-height PCI and PCIe expansion slots
- Standard 4U 19-inch rack-compatible enclosure
Cons
- Does not support sliding rails and requires a rack shelf
- Limited to two internal 3.5-inch drive bays
Good fit if
- You need 360mm liquid radiator support inside a 4U rack enclosure.
- You run an EATX system with multiple full-height PCIe add-in cards.
Skip if
- You require sliding rails for rack maintenance rather than a shelf.
- You need more than two internal 3.5-inch storage drives.
Verdict: RackChoice 4U Rackmount 360mm Radiator Chassis delivers high-capacity liquid cooling compatibility and EATX motherboard support in a server enclosure. It gives you an effective rackmount solution when standard air cooling is insufficient.
MUSETEX Mid-Tower ATX Case with 6 ARGB Fans
Best for: top-mounted 360mm liquid cooling and showcase builds
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 6 PWM ARGB
- Max GPU Length
- 400mm
View on Amazon: MUSETEX Mid-Tower ATX Case with 6 ARGB Fans (paid link)
This mid-tower chassis supports a 360mm liquid cooler on the top panel and accommodates graphics cards up to 400mm long. It comes with six pre-installed PWM ARGB fans, including two reverse-blade side intake fans. You get dual tempered glass panels providing a 270-degree view, alongside front USB Type-C connectivity. It suits you if you want a complete cooling setup ready out of the box with room for large components.
Pros
- Supports up to a 360mm radiator on the top panel
- Includes six pre-installed PWM ARGB fans
- Accommodates GPUs up to 400mm and CPU coolers up to 176mm
- Equipped with front USB 3.2 Type-C connectivity
- Dual tempered glass panels provide a 270-degree view
Cons
- 360mm radiator support is limited strictly to the top panel
- Front glass panel eliminates front intake fan positions
- Wider desk footprint at 11.61 inches
Good fit if
- You plan to mount a 360mm liquid cooler at the top of your case.
- You want six pre-installed ARGB fans without purchasing extras.
- You have a long graphics card measuring up to 400mm.
Skip if
- You need front-mounted radiator support or a front mesh intake panel.
- You require a slim chassis for a narrow desk space.
Verdict: MUSETEX Y6 Mid-Tower Case delivers top-mounted 360mm radiator support and generous 400mm GPU clearance. Its six included PWM ARGB fans provide immediate cooling without requiring extra fan purchases.
MUSETEX ATX Mid-Tower Dual Glass Case
Best for: dual-chamber builds using top 360mm liquid cooling
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3x 120mm
- Max GPU Length
- 400mm
View on Amazon: MUSETEX ATX Mid-Tower Dual Glass Case (paid link)
This mid-tower ATX case gives you a dual-chamber layout with room for a 360mm liquid cooler mounted at the top. It accommodates graphics cards up to 400mm long, CPU air coolers up to 176mm tall, and power supplies up to 200mm. Three 120mm fans come pre-installed. It suits you if you want a clean view of your components through wraparound tempered glass panels paired with modern front USB Type-C connectivity.
Pros
- Supports top-mounted liquid coolers up to 360mm
- Accommodates extra-long graphics cards up to 400mm
- Equipped with front USB 3.2 Type-C connectivity
- Tool-free snap-on panels simplify component access
Cons
- Wide 11.61-inch dual-chamber profile requires extra desktop space
- 360mm radiator support is limited to the top panel
Good fit if
- You plan to mount a 360mm radiator along the top panel
- You build with large graphics cards up to 400mm in length
- You need front-panel USB Type-C connectivity for modern devices
Skip if
- You have limited desk width for an 11.61-inch wide chassis
- You need side or front mounting space for a 360mm radiator
Verdict: MUSETEX Dual-Chamber ATX Case delivers strong clearance for 360mm top radiators and extra-long 400mm graphics cards inside a dual-chamber frame. Its tool-free glass panels and USB Type-C port make hardware installation and daily access straightforward.
MUSETEX Mid-Tower Dual-Chamber ATX Case
Best for: panoramic builds using top-mounted 360mm liquid coolers
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX, Micro-ATX, Mini-ITX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3 x 120mm Non-ARGB
- Use
- Gaming
View on Amazon: MUSETEX Mid-Tower Dual-Chamber ATX Case (paid link)
This mid-tower dual-chamber case houses ATX, Micro-ATX, or Mini-ITX motherboards behind a pillarless 270-degree tempered glass layout. For liquid cooling, you get top-mount support for a 360mm radiator alongside 176mm CPU cooler clearance and 400mm for your graphics card. It includes three pre-installed 120mm fans and USB Type-C connectivity, making it a capable choice if you want clean hardware presentation and high-end liquid cooling clearance.
Pros
- Supports up to a 360mm liquid cooling radiator on the top mount
- Clearance for GPUs up to 400mm and CPU coolers up to 176mm
- Dual-chamber layout with tool-free snap-on panels and front USB Type-C
- Compatible with back-connect ATX, Micro-ATX, and Mini-ITX motherboards
Cons
- Pre-installed 120mm fans lack built-in lighting
- 360mm radiator mounting is limited strictly to the top panel
Good fit if
- You plan to install a 360mm AIO liquid cooler along the top panel.
- You need room for a long graphics card measuring up to 400mm.
- You build with a back-connect ATX or Micro-ATX motherboard.
Skip if
- You want pre-installed fans with integrated lighting effects.
- You require side or front mounting positions for a 360mm radiator.
Verdict: MUSETEX Dual-Chamber ATX Mid-Tower Case provides dedicated top-mount 360mm radiator support and generous 400mm GPU clearance within a panoramic dual-chamber chassis. It delivers strong component compatibility and simplified assembly through tool-free snap panels.
ASUS TUF Gaming GT502 Horizon Case
Best for: dual-chamber builds needing 360mm radiator cooling
- Radiator Support
- 360mm Radiator
- Side Panel
- Tempered Glass
- Included Fans
- 4x ARGB
- Use
- Gaming
- Dimensions
- 8.9 × 16.2 × 19.8 inches
- Weight
- 25.4 pounds
View on Amazon: ASUS TUF Gaming GT502 Horizon Case (paid link)
The ASUS TUF Gaming GT502 Horizon Case is a white dual-chamber chassis built with 360mm radiator support for liquid cooling. It separates CPU and GPU thermal zones and includes four pre-installed ARGB fans along with front and side tempered glass panels. You also get a 20Gbps front-panel USB Type-C port and modular panels. It suits builders seeking panoramic interior views and organized cable routing for high-end cooling setups.
Pros
- Supports 360mm radiators for liquid cooling configurations
- Dual-chamber chassis separates CPU and GPU thermal zones
- Includes four pre-installed ARGB cooling fans
- Front panel includes a high-speed 20Gbps USB Type-C port
- Modular panels and mounting brackets detach for easier installation
Cons
- Heavy empty chassis weight of 25.35 pounds
- Wide 16.2-inch footprint requires substantial desk space
Good fit if
- You want independent cooling chambers for your graphics card and processor.
- You plan to mount a 360mm radiator alongside four included ARGB fans.
- You need a front-panel 20Gbps USB Type-C connection for fast data transfer.
Skip if
- You require a lightweight case that is easy to lift and transport.
- You have limited desk width to accommodate a 16.2-inch wide enclosure.
Verdict: ASUS TUF Gaming GT502 Horizon Case pairs 360mm radiator compatibility with a dual-chamber layout and four pre-installed ARGB fans. Its panoramic glass structure and fast front I/O deliver a well-equipped base for showcase gaming builds.
Thermaltake View 270 Plus TG ARGB Mid-Tower
Best for: large E-ATX builds needing top 360mm cooling
- Radiator Support
- 360mm Radiator
- Motherboard Support
- E-ATX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 3x 120mm ARGB
- Max GPU Length
- 420mm
View on Amazon: Thermaltake View 270 Plus TG ARGB Mid-Tower (paid link)
The Thermaltake View 270 Plus TG ARGB is a mid-tower case built for liquid cooling and clear component visibility. It accommodates up to a 360mm radiator on the top panel and supports large motherboards up to E-ATX. You also get clearance for graphics cards up to 420mm long and three pre-installed 120mm ARGB fans. It suits you if you want a pillarless glass view for a large build.
Pros
- Supports up to a 360mm radiator on the top panel
- Pre-installed with three 120mm ARGB fans
- Generous 420mm maximum graphics card length
- Front I/O includes a USB 3.2 Gen 2 Type-C port
- Accommodates motherboards up to E-ATX
Cons
- 360mm radiator support is limited to the top location
- Pillarless front glass replaces direct front mesh intake
Good fit if
- You plan to install a 360mm liquid cooler at the top of the chassis.
- You have a long graphics card up to 420mm or an E-ATX motherboard.
- You want seamless front and side tempered glass panels with pre-installed lighting.
Skip if
- You require front-panel mounting for your 360mm radiator.
- You want a perforated front panel for direct front airflow.
Verdict: Thermaltake View 270 Plus TG ARGB Mid-Tower offers dedicated top-mounted 360mm radiator support, broad E-ATX motherboard compatibility, and 420mm GPU clearance. It is a capable choice if you prioritize seamless glass visibility and large hardware clearances.
Okinos Walnut Wood ATX Case
Best for: builds needing wood accents and 360mm radiators
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX
- Side Panel
- Tempered Glass
- Included Fans
- 4x 120mm PWM
- Max GPU Length
- 415mm
- Connectivity
- Type-C
View on Amazon: Okinos Walnut Wood ATX Case (paid link)
This mid-tower ATX chassis features a genuine walnut wood accent and a tempered glass side panel. For liquid cooling setups, it accommodates a 360mm radiator mounted at the top. The case comes equipped with four pre-installed 120mm PWM fans delivering up to 200 CFM. It supports graphics cards up to 415mm long and includes a 10Gbps USB-C port. This build suits you if you need solid airflow alongside natural wood trim.
Pros
- Top mounting support for a 360mm radiator
- Pre-installed with 4 PWM fans rated up to 200 CFM total intake
- Accommodates graphics cards up to 415mm in length
- Front I/O includes a 10Gbps USB 3.2 Gen 2 Type-C port
- Supports storage configurations up to 5 SSDs
Cons
- Does not support vertical GPU installation
- Right-side 240mm cooler installation can restrict GPU width to 280mm
- Installing two side SSDs prevents mounting additional side fans
Good fit if
- You plan to mount a 360mm radiator directly to the top panel.
- You want four included PWM fans and a 10Gbps front USB-C interface.
- You need clearance for extra-long graphics cards up to 415mm.
Skip if
- You want to mount your graphics card vertically.
- You need to populate side fan mounts while utilizing side SSD storage.
Verdict: Okinos Walnut Wood ATX Case pairs genuine walnut trim with top 360mm radiator support and four included PWM fans. It accommodates GPUs up to 415mm and 5 SSDs, though horizontal mounting is your only graphics card orientation.
APNX Mid-Tower ATX Case
Best for: back-connect motherboards and flexible 360mm radiator layouts
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4x 120mm
- Max GPU Length
- 395mm
View on Amazon: APNX Mid-Tower ATX Case (paid link)
This mid-tower ATX chassis accommodates 360mm radiators on top and side mounts. It comes with four pre-installed 120mm by 30mm fans and provides 11 total fan slots. You get clearance for 395mm graphics cards, 166mm air coolers, and motherboards with rear-facing connectors alongside 40mm of cable routing depth. This chassis suits you if you need multiple liquid cooling options and clean hidden wiring.
Pros
- Supports 360mm radiators on both top and side positions
- Four pre-installed 120mm by 30mm cooling fans included
- Supports up to 11 total fan mounting slots
- Compatible with ASUS and MSI back-connect motherboards
- Generous 395mm maximum graphics card clearance
Cons
- CPU air cooler clearance capped at 166mm
- Motherboard form factor support limited to standard ATX
Good fit if
- You want top or side mounting options for a 360mm radiator.
- You build with a reverse-connector ASUS or MSI motherboard.
- You use a long graphics card measuring up to 395mm.
Skip if
- You plan to install an E-ATX motherboard.
- You use a large air cooler taller than 166mm.
Verdict: APNX Mid-Tower ATX Case provides dual 360mm radiator mounting locations, thick 30mm stock fans, and 11 fan positions. It gives you dedicated clearance for reverse-connector motherboards and extra-long graphics cards.
FOIFKIN Mid-Tower Case with 6 ARGB Fans
Best for: Airflow-focused builds with top 360mm radiators
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX, M-ATX, ITX
- Case Type
- Mid-Tower
- Included Fans
- 6x 120mm ARGB PWM
- Max GPU Length
- 400mm
- Use
- Gaming
View on Amazon: FOIFKIN Mid-Tower Case with 6 ARGB Fans (paid link)
This mid-tower chassis provides a dual-chamber layout for ATX, Micro-ATX, and Mini-ITX motherboards. You get dedicated top clearance for a 360mm liquid cooling radiator and six pre-installed 120mm ARGB PWM fans. It accommodates graphics cards up to 400mm long and power supplies up to 200mm. The design suits you if you want high component clearance, out-of-the-box multi-fan airflow, and modern front-panel Type-C connectivity for your cooling setup.
Pros
- Top mounting support for a 360mm liquid radiator
- Pre-installed with six 120mm ARGB PWM fans
- Clearance for GPUs up to 400mm and PSUs up to 200mm
- Front I/O includes a dedicated USB Type-C 3.0 port
- Dual-chamber design isolates the PSU and storage drives
Cons
- Storage capacity is limited to one 3.5-inch HDD and three 2.5-inch SSDs
- Top panel is the only specified location for 360mm radiator installation
Good fit if
- You want top 360mm radiator support alongside six included ARGB fans.
- You are installing a long graphics card measuring up to 400mm.
- You need a front-panel USB Type-C connection for peripherals.
Skip if
- You need internal drive bays for more than one 3.5-inch hard drive.
- You plan to mount your 360mm radiator in the front or side instead of the top.
Verdict: FOIFKIN Mid-Tower Case with 6 ARGB Fans delivers comprehensive out-of-the-box airflow with top 360mm radiator support and 400mm GPU clearance. Its dual-chamber build offers plenty of room for high-end gaming hardware and modern front Type-C connections.
Thermaltake View 380 XL ARGB Case
Best for: dual 360mm radiator and hidden-connector builds
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX
- Side Panel
- Tempered Glass, Mesh
- Included Fans
- 4x 120mm ARGB Lite
- Max GPU Length
- 420mm
- Dimensions
- 14.8 × 21.5 × 21.9 inches
View on Amazon: Thermaltake View 380 XL ARGB Case (paid link)
The Thermaltake View 380 XL is a PC chassis engineered for extensive cooling layouts. It accommodates 360mm radiators on both the top and side positions, supporting up to ten 120mm fans total. The chassis comes with four pre-installed 120mm ARGB Lite fans and provides 420mm of graphics card clearance. This setup suits you if you want multiple radiator placement options, ample interior workspace, and support for hidden-connector ATX motherboards.
Pros
- Dual 360mm radiator support on top and side mounts
- Four pre-installed 120mm ARGB Lite fans
- Accommodates up to ten 120mm fans
- 420mm graphics card clearance
- Dedicated cutouts for hidden-connector ATX motherboards
Cons
- Published fan specs only list 120mm sizes
- Broad footprint measuring over 21 inches wide and high
Good fit if
- You plan to mount a 360mm radiator on either the top or side panel.
- You build with hidden-connector motherboards from ASUS, MSI, or Gigabyte.
- You need up to 420mm of clearance for extra-long graphics cards.
Skip if
- You have limited desk or floor space for a chassis over 21 inches wide.
- You want native support for 140mm case fans or larger radiator sizes.
Verdict: Thermaltake View 380 XL ARGB Case supports dual 360mm radiator placements, 420mm GPUs, and hidden-connector motherboards. Its four included fans and ten-fan capacity provide ample cooling versatility for demanding system configurations.
AeroCool Mid-Tower Dual-Chamber Panoramic Case
Best for: panoramic showcase builds with dual radiators
- Radiator Support
- 360mm Radiator
- Case Type
- Mid-Tower
- Side Panel
- Tempered Glass
- Included Fans
- 2x 12cm ARGB, 1x 12cm ARGB
- Max GPU Length
- 450mm
- Use
- Gaming
View on Amazon: AeroCool Mid-Tower Dual-Chamber Panoramic Case (paid link)
This mid-tower dual-chamber case gives you panoramic views through full tempered glass front and side panels. For liquid cooling, you can install up to 360mm radiators in both the top and bottom positions. It accommodates graphics cards up to 450mm long and comes with three 120mm ARGB fans across nine total fan mounts. You will find it fits clean hardware showcases that require multi-radiator liquid setups.
Pros
- Dual 360mm radiator support in top and bottom mounts
- Accommodates graphics cards up to 450mm in length
- Includes three 120mm ARGB fans with infinity mirror lighting
- Full tempered glass front and side panels provide panoramic viewing
- Nine total fan mounting locations
Cons
- Front panel is solid tempered glass rather than ventilated mesh
- Leaves six of the nine fan mounting slots unoccupied out of the box
Good fit if
- You want top and bottom mounting locations for 360mm radiators.
- You need clearance for extra-long graphics cards up to 450mm.
- You want panoramic tempered glass front and side panels to display components.
Skip if
- You prefer a perforated front mesh intake panel over tempered glass.
- You want all nine fan mounts filled out of the box.
Verdict: AeroCool Mid-Tower Dual-Chamber Panoramic Case combines dual 360mm radiator mounting options with an expansive 450mm graphics card clearance. Its wrap-around tempered glass design makes it a practical chassis for display-oriented liquid-cooled configurations.
FOIFKIN Walnut Mid-Tower ATX Case
Best for: complete out-of-the-box cooling setups
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX, M-ATX, ITX
- Case Type
- Mid-Tower
- Side Panel
- Glass
- Included Fans
- 4x 120mm, 3x 140mm PWM ARGB
- Max GPU Length
- 400mm
View on Amazon: FOIFKIN Walnut Mid-Tower ATX Case (paid link)
This ATX mid-tower case features a real walnut front panel and houses top-mounted liquid coolers up to 360mm. It includes seven pre-installed PWM ARGB fans, split across three 140mm and four 120mm units. You get 400mm of graphics card clearance, 174mm of CPU cooler height, and front-panel Type-C connectivity. It suits builders who want high airflow out of the box with room for large cooling setups.
Pros
- Supports top-mounted 360mm, 280mm, and 240mm radiators
- Comes with seven pre-installed PWM ARGB fans (three 140mm, four 120mm)
- Accommodates graphics cards up to 400mm and CPU coolers up to 174mm
- Front panel includes a USB 3.0 Type-C port
Cons
- Radiator mounting is restricted to the top panel
- Internal drive capacity is limited to four total drives
Good fit if
- You want seven pre-installed PWM ARGB fans included with the chassis.
- You plan to install a top-mounted 360mm AIO liquid cooler.
- You need clearance for an oversized graphics card up to 400mm.
Skip if
- You want to mount a 360mm radiator in the front intake position.
- You need to install more than four internal storage drives.
Verdict: FOIFKIN Walnut Mid-Tower ATX Case delivers expansive cooling support with top 360mm radiator clearance and seven pre-installed PWM ARGB fans. Its timber front panel and 400mm GPU clearance make it a capable foundation for high-end builds.
Thermaltake View 380 TG Dual-Chamber Mid Tower
Best for: Dual 360mm radiator hidden-connector PC builds
- Radiator Support
- 360mm Radiator
- Motherboard Support
- ATX
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 4x 120mm ARGB Lite
- Max GPU Length
- 415mm
View on Amazon: Thermaltake View 380 TG Dual-Chamber Mid Tower (paid link)
The Thermaltake View 380 TG is a dual-chamber mid-tower chassis built for high-airflow liquid cooling. You get support for 360mm radiators on both the top and bottom panels, plus room for up to ten 120mm fans. It includes four pre-installed 120mm ARGB Lite fans and supports back-connect motherboards. You will find it suits clean dual-radiator systems.
Pros
- Fits 360mm radiators on top and bottom locations
- Includes four 120mm ARGB Lite fans
- Supports ATX hidden-connector motherboards like ASUS BTF and MSI Project Zero
- Accommodates up to ten 120mm cooling fans
- Dual-chamber design separates components from cabling and storage
Cons
- Chassis fan mounts specify 120mm sizes with no listed 140mm support
- Chassis width exceeds 19 inches due to the dual-chamber layout
Good fit if
- You plan to install 360mm radiators on the top or bottom panel.
- You use an ATX hidden-connector motherboard to conceal cable routing.
- You want pre-installed intake and exhaust ARGB fans out of the box.
Skip if
- You prefer 140mm cooling fans over 120mm options.
- You have tight desk space that cannot fit a wide dual-chamber case.
Verdict: Thermaltake View 380 TG Dual-Chamber Mid Tower provides flexible cooling with dual 360mm radiator placements and space for ten fans. Back-connect motherboard cutouts keep your primary compartment uncluttered.
HYXN H1 Dual-Chamber Mid-Tower Case
Best for: dual 360mm radiator builds needing included fans
- Radiator Support
- 360mm Radiator
- Case Type
- Mid Tower
- Side Panel
- Tempered Glass
- Included Fans
- 7x 120mm ARGB PWM
- Motherboard Support
- ATX
- Use
- Gaming
View on Amazon: HYXN H1 Dual-Chamber Mid-Tower Case (paid link)
The HYXN H1 is a dual-chamber mid-tower chassis built for extensive liquid cooling setups. It accommodates up to two 360mm radiators at the same time across the top and side mounts. You get seven pre-installed 120mm ARGB PWM fans, clearance for graphics cards up to 400mm, and a front I/O USB Type-C port. Its dual-glass design suits you if you want multi-radiator capability with broad hardware space.
Pros
- Supports dual 360mm radiators simultaneously on top and side
- Includes seven pre-installed 120mm ARGB PWM fans
- Fits GPUs up to 400mm and CPU coolers up to 170mm
- Front I/O features a dedicated USB Type-C port
Cons
- Storage capped at three SSDs or one HDD plus two SSDs
- Dual tempered glass panels eliminate direct front-panel airflow
Good fit if
- You want to mount two 360mm radiators in one build.
- You prefer a case bundled with seven PWM ARGB fans.
- You run a long graphics card measuring up to 400mm.
Skip if
- You require space for more than three storage drives.
- You want front-to-back straight-through mesh airflow.
Verdict: HYXN H1 Dual-Chamber Mid-Tower Case delivers high liquid cooling potential by supporting dual 360mm radiators and seven factory-installed fans.
Specifications side by side
| Spec | SilverStone 4U Rackmount Server Chassis | RackChoice 4U Rackmount 360mm Radiator Chassis | MUSETEX Mid-Tower ATX Case with 6 ARGB Fans | MUSETEX ATX Mid-Tower Dual Glass Case | MUSETEX Mid-Tower Dual-Chamber ATX Case | ASUS TUF Gaming GT502 Horizon Case | Thermaltake View 270 Plus TG ARGB Mid-Tower | Okinos Walnut Wood ATX Case | APNX Mid-Tower ATX Case | FOIFKIN Mid-Tower Case with 6 ARGB Fans | Thermaltake View 380 XL ARGB Case | AeroCool Mid-Tower Dual-Chamber Panoramic Case | FOIFKIN Walnut Mid-Tower ATX Case | Thermaltake View 380 TG Dual-Chamber Mid Tower | HYXN H1 Dual-Chamber Mid-Tower Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motherboard Support | SSI-EEB, Extended ATX | EATX, ATX, MicroATX, Mini-ITX | ATX | ATX | ATX, Micro-ATX, Mini-ITX | not specified | E-ATX | ATX | ATX | ATX, M-ATX, ITX | ATX | not specified | ATX, M-ATX, ITX | ATX | not specified |
| Case Type | 4U Rackmount | 4U rackmount | Mid Tower | Mid Tower | Mid Tower | not specified | Mid Tower | not specified | Mid-Tower | Mid-Tower | not specified | Mid-Tower | Mid-Tower | Mid Tower | Mid Tower |
| Side Panel | not specified | not specified | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | Tempered Glass | not specified | Tempered Glass, Mesh | Tempered Glass | Glass | Tempered Glass | Tempered Glass |
| Included Fans | not specified | not specified | 6 PWM ARGB | 3x 120mm | 3 x 120mm Non-ARGB | 4x ARGB | 3x 120mm ARGB | 4x 120mm PWM | 4x 120mm | 6x 120mm ARGB PWM | 4x 120mm ARGB Lite | 2x 12cm ARGB, 1x 12cm ARGB | 4x 120mm, 3x 140mm PWM ARGB | 4x 120mm ARGB Lite | 7x 120mm ARGB PWM |
| Radiator Support | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm | 360mm |
| Max GPU Length | not specified | not specified | 400mm | 400mm | not specified | not specified | 420mm | 415mm | 395mm | 400mm | 420mm | 450mm | 400mm | 415mm | not specified |
| Tower Size | not specified | not specified | Mid-Tower | Mid-Tower | Mid-Tower | not specified | Mid-Tower | not specified | Mid-Tower | Mid-Tower | not specified | Mid-Tower | Mid-Tower | Mid-Tower | Mid-Tower |
| Fan Size | not specified | not specified | not specified | 120mm | 120mm | not specified | not specified | 120mm | 120mm | not specified | not specified | not specified | not specified | not specified | not specified |
| Use | Server | Server | Gaming | Gaming | Gaming | Gaming | not specified | not specified | not specified | Gaming | not specified | Gaming | Gaming | not specified | Gaming |
| Lighting | not specified | not specified | ARGB | not specified | ARGB | ARGB | ARGB | not specified | not specified | ARGB | ARGB | RGB | ARGB | ARGB | ARGB |
| Connectivity | not specified | not specified | Type-C | Type-C | Type-C | not specified | not specified | Type-C | Type-C | Type-C | not specified | not specified | Type-C | not specified | Type-C |
| Compatible Device | Radiator | Radiator | not specified | not specified | not specified | Radiator | Radiator | Radiator | Radiator | Radiator | Radiator | Radiator | not specified | Radiator | Radiator |
| Dimensions | 18.4 × 17.3 × 6.93 inches | 18.3 × 19 × 7 inches | 11.6 × 16.5 × 14.5 inches | 16.5 × 11.6 × 14.5 inches | 16.5 × 11.6 × 14.5 inches | 8.9 × 16.2 × 19.8 inches | 8.1 × 22 × 18 inches | 18.7 × 8.66 × 19.1 inches | not specified | 16.9 × 8.38 × 19.2 inches | 14.8 × 21.5 × 21.9 inches | not specified | 16.2 × 7.87 × 17.7 inches | 14.8 × 19.3 × 20.1 inches | 16.5 × 11.2 × 17.3 inches |
| Weight | not specified | 15.3 pounds | not specified | 16.9 pounds | 15 pounds | 25.4 pounds | 14 pounds | 14.2 pounds | not specified | not specified | 1 pounds | not specified | not specified | not specified | 11 pounds |
| Size | 4U | 19 inches (W) x 7 inches (H) x 18.3 inches (D) | 16.54"D x 11.61"W x 14.49"H | 16.54"D x 11.61"W x 14.49"H | 16.54"D x 11.61"W x 14.49"H | Panoramic|White|4x ARGB Fans | ARGB | not specified | not specified | F1 | not specified | not specified | not specified | ARGB | H1 |
| Color | black | black | White | Black | Black | WHITE | Black | black | ChromaFlair | Black | Black | White | Walnut wood | Bubble Pink | White |
| Model | SST-RM44 | not specified | Y6-N5-W | Y6 | Y6 | TUF GAMING GT502 HORIZON TG ARGB WHITE | CA-1Y7-00M1WN-01 | not specified | not specified | not specified | CA-11E-00M1WN-00 | P300C/P500C | not specified | CA-1Z2-00MAWN-00 | not specified |
Is 360mm radiator support worth it?
A 360mm radiator mount lets you install triple-fan liquid cooling hardware directly into your chassis. This spec provides the mounting rails for three 120mm fans alongside a full-length heat exchanger. In daily operation, cases with this support accommodate high-heat components and long graphics cards reaching up to 450mm. Select models even provide dual 360mm mounting locations across top and side positions. Choosing a chassis with this clearance ensures dedicated room for standard liquid loops without colliding with your motherboard, expansion slots, or interior cabling.
Worth it if
- You plan to install a triple-fan liquid cooler requiring three 120mm fan mounts.
- You want a dual-chamber or dual-mount layout capable of fitting multiple 360mm radiators.
Skip it if
- You use standard air heatsinks rather than liquid cooling assemblies.
- You prefer smaller chassis dimensions and do not need clearance for 360mm brackets.
If you decide a large enclosure exceeds your space requirements, you can review specifications for a mini PC under 200 instead.
How We Picked These Cases
You find cases here based on verified support for a 360mm radiator. We scan published listings and include models that confirm 360mm liquid cooling compatibility in their titles or feature lists. To give you a clear view of your options, we display only one size or variant from each product family. All details come directly from published specifications, and products are not physically handled.
The guide arranges products in stock first so you can identify available hardware immediately. We focus on published dimensions, motherboard form factor support, and fan mounts so you can plan your cooling setup accurately. Current availability and pricing update daily on the page.
How to Choose the Right 360mm Radiator Case
-
Dual Radiator Mounting Capacity
Check whether the chassis supports more than one 360mm radiator if you plan to liquid-cool both your CPU and GPU simultaneously. Many standard mid-towers restrict 360mm radiator placement strictly to the top panel. In contrast, models like the APNX Mid-Tower ATX Case provide dual 360mm radiator mounting locations across 11 fan positions. Verify the secondary mounting location before you purchase your liquid cooling hardware. Choosing a chassis with dual 360mm mounts gives you the freedom to run multiple large heat exchangers without sacrificing chassis airflow or running out of mounting rails.
-
Graphics Card Length Clearance
Compare graphics card clearance numbers against your specific GPU model. Installing a 360mm radiator, pump assembly, or internal reservoir can reduce the space available for long graphics cards. The AeroCool Mid-Tower Dual-Chamber Panoramic Case provides up to 450mm of GPU clearance, which accommodates the longest modern expansion cards comfortably. Standard mid-towers frequently top out near 400mm or 420mm. Measure the exact length of your graphics card before selecting a case. You want at least an inch of spare clearance to ensure straightforward installation, clean cable routing, and unobstructed airflow paths around your components.
-
Pre-Installed Fan Configurations
Check how many cooling fans arrive pre-installed in the chassis. A 360mm radiator cools your CPU, but your graphics card and power delivery components still require dedicated intake and exhaust ventilation. The FOIFKIN Walnut Mid-Tower ATX Case includes seven pre-installed PWM ARGB fans, providing an immediate full-system cooling setup without requiring extra purchases. Other cases include four fans or omit them entirely. If you want a quick installation process, pick a model with pre-wired fans. If you plan to use custom matching fans across your entire build, choose a case that leaves the fan brackets open.
-
Front Panel Connectivity Specs
Examine the front I/O ports before deciding on an enclosure. Modern peripheral hardware and portable storage drives rely on USB Type-C connections for high-speed file transfers and device charging. The MUSETEX ATX Mid-Tower Dual Glass Case includes a built-in Type-C port on its external panel alongside standard USB ports. Ensure your selected motherboard features the internal header required to power front-panel Type-C connectivity. If you frequently connect external solid-state drives or modern accessories to your desktop, verifying this spec in advance avoids the need for rear port adapters or awkward reaches behind your computer.
-
Reverse Connector Motherboard Support
Check motherboard tray cutouts if you plan to use a back-connect motherboard. Reverse-connector motherboards position power and data headers on the back of the PCB to keep the main chamber clutter-free. The Thermaltake View 380 TG Dual-Chamber Mid Tower features cutouts engineered specifically for hidden-connector motherboards. Standard cases lack these rear cutouts, preventing back-connect motherboards from seating properly against the standoffs. If you use a conventional front-connecting board, this feature remains optional. However, if clean internal chamber visibility without visible wiring is your priority, confirm back-connect compatibility before buying your case.
-
Dual Chamber Layout Benefits
Evaluate the physical footprint and internal chamber design of the case. Dual-chamber mid-towers place the power supply and storage drives behind the motherboard tray, widening the case while lowering its overall height. For instance, the ASUS TUF Gaming GT502 Horizon Case uses a dual-chamber structure that separates heat zones and provides ample cable storage behind the panel. Standard tower layouts maintain a slimmer desk footprint by keeping the power supply beneath a bottom shroud. Select a dual-chamber design if you want simpler cable organization, or stick to a traditional layout if desk width is limited.
Frequently asked questions
What graphics card length can you fit alongside a 360mm radiator?
Most mid-towers that support 360mm radiators provide extensive graphics card clearance because of their elongated frame dimensions. In this guide, models like the AeroCool Mid-Tower Dual-Chamber offer up to 450mm of GPU clearance, while the Thermaltake View 270 Plus TG accommodates cards up to 420mm. Top-mounting the 360mm radiator prevents the cooler from reducing the front-to-back clearance needed for these extra-long modern GPUs.
Can you install back-connect motherboards in a case with a 360mm radiator?
Yes, several mid-tower chassis accommodate reverse-connector motherboards while retaining 360mm radiator support. The APNX Mid-Tower ATX Case and Thermaltake View 380 TG Dual-Chamber include cutouts specifically designed for back-connect mainboards. These dedicated tray openings route power cables directly into the rear compartment, keeping your primary chamber unobstructed while you run a full 360mm radiator cooling assembly along the top or side brackets.
Do cases supporting 360mm radiators come with pre-installed fans?
Many cases include pre-installed fans, though the quantity and layout depend entirely on the model. For instance, the FOIFKIN Walnut Mid-Tower ATX Case includes seven pre-installed PWM ARGB fans, and the MUSETEX Y6 mid-tower variants come with six fans out of the box. Conversely, server chassis like the SilverStone SST-RM44 focus on raw hardware housing and do not include decorative ARGB fan bundles.
What is the benefit of a dual-chamber chassis for 360mm cooling?
Dual-chamber cases isolate the power supply and storage drives into a separate compartment behind the motherboard tray. Enclosures such as the ASUS TUF Gaming GT502 Horizon and MUSETEX Dual-Chamber ATX use this divided structure to open direct airflow paths in the main section. This separation leaves ample dedicated mounting space along the top or side panels for 360mm radiator assemblies without colliding with power cabling.
Can you fit an E-ATX motherboard into a case designed for 360mm liquid cooling?
Yes, select 360mm-compatible cases provide sufficient tray width to install E-ATX motherboards. For consumer mid-towers, the Thermaltake View 270 Plus TG ARGB supports E-ATX boards alongside its top 360mm radiator mount. If you are building a server setup, the RackChoice 4U chassis supports full EATX form factors. Always confirm that your motherboard width will not cover adjacent side radiator brackets or internal cable pass-throughs.
Does a 360mm radiator case support modern USB Type-C front ports?
Most recent consumer mid-towers with 360mm radiator capability incorporate high-speed front I/O options. Cases such as the Okinos Walnut Wood ATX Case, FOIFKIN Mid-Tower F1, and various MUSETEX mid-towers feature built-in USB Type-C ports on their front or top panels. Checking the connectivity specs ensures your chassis matches your motherboard's internal front-panel USB 3.2 headers for fast external storage and peripheral connectivity.
How much total fan capacity is typical in a case with 360mm radiator support?
Cases accommodating 360mm liquid coolers typically support between seven and eleven total fan locations. The APNX Mid-Tower ATX Case features up to 11 fan positions, while the Thermaltake View 380 XL ARGB provides room for 10 fans. This high capacity allows you to mount three 120mm fans on your 360mm radiator while retaining multiple dedicated intakes along the bottom, side, or front for balanced system ventilation.